English dropdown-ico

Manual Kodak EKTAGRAPHIC III

38 pages 0.7 mb
Download

Go to site of 38

Summary
  • Kodak EKTAGRAPHIC III - page 1

    Operating Manual PRESENTATION TECHNOLOGIES KO D A K EKT A GRAPHIC III Slide Pr ojector s ...

  • Kodak EKTAGRAPHIC III - page 2

    Impor tant Safety Instructions When using your projector , always follo w basic safety precautions: 1. Read and understand all instructions before using this equipment. 2. Operate this projector with 110- to 125-volt 60 Hz current only . Incorrect voltage can cause projector malfunction. See “ Startup ” on page 3 for Models III BR and III ABR, ...

  • Kodak EKTAGRAPHIC III - page 3

    Operating Manual KO DA K EKT A GRAPHIC III Slide Pr ojector s ...

  • Kodak EKTAGRAPHIC III - page 4

    Congratulations! Y ou have just purchased a K OD AK EKT A GRAPHIC III Slide Projector with a K ODAK Extra Bright Lamp Module. This new lamp module procides 30% greater light intensity so your images look brighter, richer and more saturated. This module features a “Lamp On” indicator on the lamp module door. ...

  • Kodak EKTAGRAPHIC III - page 5

    KODAK EKTAGRAPHIC III Slide Projector 1 Contents Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Kodak EKTAGRAPHIC III - page 6

    2 KODAK EKTAGRAPHIC III Slide Projector Overview FR ONT RIGHT B A CK RIGHT B ASE 1 – T r ay 2 – Lock Ring 3 – Storage Compartment/Remote 4 – Ele vating F oot 5 – Ele vating Adjustment Wheel 6 – Ele vating F oot Release Button 7 – Lens 8 – View er (Model A TS) 9 – F ocus Knob 10 – A utof ocus (Models A, AMT , & A TS) 11 – S ...

  • Kodak EKTAGRAPHIC III - page 7

    KODAK EKTAGRAPHIC III Slide Projector 3 Intr oduction T ake the time to read the instructions in this operating manual to become familiar with your K OD AK EKT A GRAPHIC III Slide Projector and how to operate it properly . Operation Star tup Models III BR and ABR Only Important Before you turn on your new KODAK EKTAGRAPHIC III BR or ABR Slide Proje ...

  • Kodak EKTAGRAPHIC III - page 8

    4 KODAK EKTAGRAPHIC III Slide Projector Operation EKT A GRAPHIC III BR and ABR Slide Projectors hav e a sensing capability to automatically set the proper power c ycle (50 or 60 Hz). This eliminates the need to manually change the two-position switch included on models manufactured before No vember 1996. These projectors are shipped with a detachab ...

  • Kodak EKTAGRAPHIC III - page 9

    KODAK EKTAGRAPHIC III Slide Projector 5 Operation Models A, AMT and ATS Open the storage compartment and remov e the remote control. Plug the 5-pin cable remote connector into the remote-control receptacle, aligning the raised dot with the metallic rivet head . This receptacle also accepts plugs for accessories, such as K odak dissolve controls. Pl ...

  • Kodak EKTAGRAPHIC III - page 10

    6 KODAK EKTAGRAPHIC III Slide Projector Operation Loading the Slide T ra y A K ODAK EKT AGRAPHIC Uni versal Slide T ray is designed to hold up to 80 slides. Be sure that your slide mounts are in good condition; frayed or bent mounts may fail to drop into the projector . A variety of slide trays are av ailable with capacity up to 140 slides. See you ...

  • Kodak EKTAGRAPHIC III - page 11

    KODAK EKTAGRAPHIC III Slide Projector 7 Operation Front-Screen Projection Remov e the lock ring by turning it countercloc kwise and lifting it off. Check each slide’ s orientation (horizontal or vertical), and arrange them in the order you wish to show them. Then turn the slides upside down . Number each mount in the upper right-hand corner of th ...

  • Kodak EKTAGRAPHIC III - page 12

    8 KODAK EKTAGRAPHIC III Slide Projector Operation Replace the lock ring by turning it clockwise until it is secure Rear -Screen Projection Y ou can easily adapt a sho w from front- to rear-screen projection. Remov e each slide from the tray and turn it ar ound (keeping the slide upside do wn). This will gi ve the projected slide a mirror image on t ...

  • Kodak EKTAGRAPHIC III - page 13

    KODAK EKTAGRAPHIC III Slide Projector 9 Operation Tray Place the loaded slide tray on the projector . Align the tray index bar with the gate index . The tray will drop into position. Remo ving the T ra y To remove the slide tray: • press the select bar all the way down • align the tray index bar with the gate index . Y ou can then lift off the ...

  • Kodak EKTAGRAPHIC III - page 14

    10 KODAK EKTAGRAPHIC III Slide Projector Operation Pr ojecting Y our Slides Lens T o insert a lens , push the focus knob up and position the lens gear teeth on the lens barrel with the notch on the projector . Lamp Slide the power switch to half lamp (for longer lamp life) or lamp (for maximum brightness). Y ou may want to keep a spare K ODAK EC La ...

  • Kodak EKTAGRAPHIC III - page 15

    KODAK EKTAGRAPHIC III Slide Projector 11 Operation Forward and Reverse Press the forward b utton on the projector or the remote control to project the first slide. T o change slides, briefly press the forward or re verse buttons. Focus Focus your first slide using the f ocus knob on the projector or the focus button on the remote control. A utof ...

  • Kodak EKTAGRAPHIC III - page 16

    12 KODAK EKTAGRAPHIC III Slide Projector Operation Screen Image Use the elev ating foot to horizontally center the projected image on the screen. T o release the foot, press the release b utton , while lifting the front of the projector to the desired height. Use the elev ating wheel to make fine adjustments. If the image is not le vel, make an ad ...

  • Kodak EKTAGRAPHIC III - page 17

    KODAK EKTAGRAPHIC III Slide Projector 13 Operation Reading Light T o illuminate a small area for reading, lift the reading light cov er while the projector lamp is on. Standb y Light (Model E Plus only) A glowing standby light indicates a “ready” condition. In a dissolve program, it indicates that • both projectors are receiving power • bot ...

  • Kodak EKTAGRAPHIC III - page 18

    14 KODAK EKTAGRAPHIC III Slide Projector Operation Important All equipment, cables, and connectors used with the special-application receptacle must be assembled by qualified electronic personnel All circuits connected electrically to the projector through this receptacle must hav e a rating of not more than 30 V (rms) and must comply with Underwr ...

  • Kodak EKTAGRAPHIC III - page 19

    KODAK EKTAGRAPHIC III Slide Projector 15 Operation Choosing a Curved- or Flat-Field Lens The lens you select depends on ho w you use your projector and what type of slide mount you use. So that you may choose the lens that best meets your needs, we do not include a lens with the projector . T o obtain the best results of a projected image, insert s ...

  • Kodak EKTAGRAPHIC III - page 20

    16 KODAK EKTAGRAPHIC III Slide Projector Operation LD 75 mm 13.3’ 100 mm 17.7’ 125 mm 22.2’ 150 mm 26.6’ 175 mm 31.0’ 200 mm 35.4’ ...

  • Kodak EKTAGRAPHIC III - page 21

    KODAK EKTAGRAPHIC III Slide Projector 17 Operation Editing Y our Presentation Remo ving the Loc k Ring T o add or remov e slides in the tray , you must first remove the lock ring . T urn the ring counterclockwise and lift off. Remo ving a Slide Rotate the tray to the slide you wish to remove. Firmly press and hold do wn the select bar to eject the ...

  • Kodak EKTAGRAPHIC III - page 22

    18 KODAK EKTAGRAPHIC III Slide Projector Operation Clearing a Gate Jam T o remov e a defecti ve slide or foreign object stuck in the projector gate, you need to remov e the tray . • Slide the tray release latch in the direction of the arrow , and • with your other hand, lift off the back of the tray . Rotate the metal plate on the bottom of the ...

  • Kodak EKTAGRAPHIC III - page 23

    KODAK EKTAGRAPHIC III Slide Projector 19 Operation Using the Built-In Viewer (Model A TS Only) Important Before opening the viewer, you must remove the projection lens from the projector. Remo ving the Lens T urn the focus knob to the horizontal position. Push the knob to ward the top of the projector as you withdraw the lens . Opening the Viewer G ...

  • Kodak EKTAGRAPHIC III - page 24

    20 KODAK EKTAGRAPHIC III Slide Projector Operation Reinserting the Lens T o reinsert the lens , push the focus knob up and position the lens gear teeth on the lens barrel with the notch on the projector . Using a Dissolve Contr ol One of the more common uses for a dissolve control is a simple tw o-projector fade. This feature fades do wn the light ...

  • Kodak EKTAGRAPHIC III - page 25

    KODAK EKTAGRAPHIC III Slide Projector 21 Maintenance T o ensure a long life and trouble-free operation for your projector: • Allow the air to f low freely around the projector . • Do not recirculate warm air . • Keep the projector dust free. • If your projector is chilled, bring it to room temperature before operating. Projection Lamps Quar ...

  • Kodak EKTAGRAPHIC III - page 26

    22 KODAK EKTAGRAPHIC III Slide Projector Maintenance Changing the Pr ojection Lamp Slide the po wer switch to Off and unplug the projector . Allo w the projector and lamp to cool for about 10 minutes. Push the lamp-module release button and remov e the lamp module . Y ou can replace it with a ne w lamp module or replace only the lamp. Note: There i ...

  • Kodak EKTAGRAPHIC III - page 27

    KODAK EKTAGRAPHIC III Slide Projector 23 Maintenance Cleaning the Condenser , Heat-Absorbing Glass, and Mirr or T o clean the condenser , heat-absorbing glass, or mirror , you must disassemble the lamp module. Slide the power switch to Off and unplug the projector. Allow the projector to cool about 10 minutes. Push the lamp-module release button an ...

  • Kodak EKTAGRAPHIC III - page 28

    24 KODAK EKTAGRAPHIC III Slide Projector Maintenance Condenser Lens Y ou can clean the condenser lens in place, or by pulling it out. W ear gloves to pre vent fingerprints. Heat-Absorbing Glass (Models without K OD AK Extra Bright Lamp Module) Caution The heat-absorbing glass is fragile. Handle it only when cool. The heat-absorbing glass easily re ...

  • Kodak EKTAGRAPHIC III - page 29

    KODAK EKTAGRAPHIC III Slide Projector 25 Maintenance Reassembling the Lamp Module T o reassemble the lamp module, you will need to align and insert each tab into its appropriate slot . Start with the tabs in the rear of the lamp module. Insert the remainder of the tabs into slots until all 7 tabs on the top and 2 on the bottom are secured. Insert t ...

  • Kodak EKTAGRAPHIC III - page 30

    26 KODAK EKTAGRAPHIC III Slide Projector Maintenance Mirror T o clean the mirror , in vert the lamp module to reach the mirror . Gently clean the mirror with a soft, lint-free cloth moistened with lens cleaner . When your maintenance is complete, push the lamp module back into the projector . Thermal Fuses Y our projector has two thermal fuses that ...

  • Kodak EKTAGRAPHIC III - page 31

    KODAK EKTAGRAPHIC III Slide Projector 27 T r oubleshooting Consult this guide before calling for service. PROBLEM CA USE CORRECTION Projector does not operate No power to projector Plug po wer cord into suitable electrical outlet. Set power s witch to Lamp . No illumination on screen with slide in projector gate P ower s witch on Off or F an Set s ...

  • Kodak EKTAGRAPHIC III - page 32

    28 KODAK EKTAGRAPHIC III Slide Projector Troubleshooting Slide f ails to drop into projection position T r a y base plate not properly index ed Rotate the tra y base plate until it locks into position. T r a y not properly positioned on projector Reposition tra y on projector. Slide mount warped or fray ed at corners slide. Straighten mount or remo ...

  • Kodak EKTAGRAPHIC III - page 33

    KODAK EKTAGRAPHIC III Slide Projector 29 W arranty K odak warrants this KOD AK EKT A GRAPHIC Slide Projector to function properly for four years from the date of purchase. If this K ODAK EKT AGRAPHIC Slide Projector does not function properly within the warranty period, upon submission of dated proof of purchase, K odak will repair it without charg ...

  • Kodak EKTAGRAPHIC III - page 34

    30 KODAK EKTAGRAPHIC III Slide Projector Ho w to Obtain Ser vice Assistance U.S.: 1-800-242-2424 Canada: 1-800-465-6325 www.kodak.com/go/projectors To obtain service or for assistance in using your KODAK EKTAGRAPHIC Slide Projector, contact the Kodak Information Center at 1-800-242-2424 , Monday through Friday, 8 a.m. to 8 p.m. (Eastern time). In C ...

  • Kodak EKTAGRAPHIC III - page 35

    KODAK EKTAGRAPHIC III Slide Projector 31 Appendix A Special-Application Receptacle Identification Chart Contacts Function Description 1 & 3 Zero-P osition Switch (Models A and E Plus) Connects to an internal single-pole single-throw nor mally open s witch. Contacts are closed when the slide tray is at an y position other than zero . These lead ...

  • Kodak EKTAGRAPHIC III - page 36

    ...

  • Kodak EKTAGRAPHIC III - page 37

    ...

  • Kodak EKTAGRAPHIC III - page 38

    Part No. 5B905 12/98 Revision ©EastmanKodak Company Printed In U.S.A. PRESENTATION TECHNOLOGIES Presentation Technologies EASTMAN KODKCOMPANY Rochester, New York 14650 www.kodak.com/go/projectors K odak, Ektagraphic, and kodalux are trademarks. ...

Manufacturer Kodak Category Projector

Documents that we receive from a manufacturer of a Kodak EKTAGRAPHIC III can be divided into several groups. They are, among others:
- Kodak technical drawings
- EKTAGRAPHIC III manuals
- Kodak product data sheets
- information booklets
- or energy labels Kodak EKTAGRAPHIC III
All of them are important, but the most important information from the point of view of use of the device are in the user manual Kodak EKTAGRAPHIC III.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Kodak EKTAGRAPHIC III, service manual, brief instructions and user manuals Kodak EKTAGRAPHIC III. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Kodak EKTAGRAPHIC III.

Similar manuals

A complete manual for the device Kodak EKTAGRAPHIC III, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Kodak EKTAGRAPHIC III by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Kodak EKTAGRAPHIC III.

A complete Kodak manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Kodak EKTAGRAPHIC III - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Kodak EKTAGRAPHIC III, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Kodak EKTAGRAPHIC III, that we can find in the current document
3. Tips how to use the basic functions of the device Kodak EKTAGRAPHIC III - which should help us in our first steps of using Kodak EKTAGRAPHIC III
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Kodak EKTAGRAPHIC III
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Kodak EKTAGRAPHIC III in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Kodak EKTAGRAPHIC III?

Use the form below

If you did not solve your problem by using a manual Kodak EKTAGRAPHIC III, ask a question using the form below. If a user had a similar problem with Kodak EKTAGRAPHIC III it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)