English dropdown-ico

Manual Lucent Technologies Network Access Module

75 pages 0.74 mb
Download

Go to site of 75

Summary
  • Lucent Technologies Network Access Module - page 1

    MERLIN MAGIX™ Integrated Network Access (INA) Module Installation and Configuration Guide Lucent T echnologies October 1 999 7820-10 00-001 ...

  • Lucent Technologies Network Access Module - page 2

    Notice Every effort ha s been made to ensure t hat the informa tion in th is guide is compl ete and accu rate at the time of printing. Inform ation, however , is subject to change. Y our Responsibility for Y our System ’ s Security LUCENT DOES NOT W ARRANT UNINTERRUPTED OR E RROR-FREE OPERA TION OF THE PRODUCTS, INCLUDING MERLIN® INA. ALSO, LUCE ...

  • Lucent Technologies Network Access Module - page 3

    Copyright an d T radem arks © 1999 Lucen t T echnolo gies. Al l right s reserve d. MLX-1 0, MLX- 20L, MLX -28D , MLS-6 , MLS-1 2, MLS- 12D, MLS -18D, ML S-34D, PortM aster , ComO S, and MERLIN a r e registered tradem arks and PMV ision a nd MERLIN M AGIX are trade marks of L ucen t T echn ologies. All other marks are the prod uct of their respecti ...

  • Lucent Technologies Network Access Module - page 4

    ...

  • Lucent Technologies Network Access Module - page 5

    v Contents Safety Instructions Important Safety Instructions —SA VE THESE INSTRUCTIONS . . . . . . . . . . . . . . . . . ix About Th is Guide Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Lucent Technologies Network Access Module - page 6

    Contents vi INA Module Instal lation and Configur at ion Guide Connect a Serial Passthrough Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 Set DIP Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 Connect a Console (Optional) . . . . . . . . . . . . . . ...

  • Lucent Technologies Network Access Module - page 7

    Cont ents vii Set the Destination IP Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7 Set the Netmask . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7 Set the T r ansport Pro tocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Lucent Technologies Network Access Module - page 8

    Contents viii INA Module Instal lation and Configur ation Guide Current Events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-5 Selected Interval Events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-5 Clearing Error Events . . . . . . . . . . . . . ...

  • Lucent Technologies Network Access Module - page 9

    ix Safety Instructions Important Safety Instructions — SA VE THESE INSTRUCTIONS T o reduce the ris k of fire, ele ctrica l shock, an d injur y to person s, follo w these basic safety pr ecaution s when ins talling tele phone eq uipmen t: • Read and understand all instr uctions. • Follow all warnin gs and in structions marked on or packed w it ...

  • Lucent Technologies Network Access Module - page 10

    Important Safety In structions —SAVE THESE INSTRUCTIONS x INA Module Installat ion and Configuration Gu ide ...

  • Lucent Technologies Network Access Module - page 11

    xi About This Guide The MERLIN MAGIX Integrated Network Acce ss (INA) Installation and Con figuration Guide provides insta llation and configuration ins tructions for the MERLI N MAGIX Integrate d System (IS) Integr ated Network Acce ss (INA) mod ule. The routing functi ons of the module a re ba sed o n Lucen t T e chno log y’ s PortM aste r ® s ...

  • Lucent Technologies Network Access Module - page 12

    Related Docume nta tion xii INA Module Installat ion and Configuration Gu ide 555-61 0-150 MERLIN LEGEND <Su pers cript> ® C ommunications System, Relea se 6.1, Network Refere nce 555-71 0-800 Cus tomer Referenc e CD-ROM : Consists of the System Mana ger’ s Qui ck Reference , th e Feat ure Refere nce , System Programming , and the N etwork ...

  • Lucent Technologies Network Access Module - page 13

    About This Gu ide xiii Additional Refe rences PortMaster Documentation The fol lowing ma nuals ar e availa ble from Lucent. Paper copi es of th ese manu als can be ordere d directly from L ucent. The manu als a re also prov ided a s P DF a nd Po stScri pt file s o n the I NA Modu le S of tware CD shippe d with your mod ule. In additi on, you can do ...

  • Lucent Technologies Network Access Module - page 14

    Document Con ventions xiv INA Module Installat ion and Configuration Gu ide Document Convent ions The following conventions are used in this g uide: Document Advisories Note – me ans take note. Notes conta in information of import ance or specia l interest. Caut ion – means be caref ul. Y ou might do something—or f ail to do something—tha t ...

  • Lucent Technologies Network Access Module - page 15

    About This Gu ide xv Limited Wa rranty Limited W arranty Lucent T echnologies pr ovides a limited warr anty on the INA module. R e fer to “L imited W arranty and L imitation of Lia bility” in App e ndix A, “Customer Su pport Informat ion,” of System Program ming manual ( 5 55-710 -111). T echnical Supp ort In the U SA Only . Lucent T echnol ...

  • Lucent Technologies Network Access Module - page 16

    Subscribin g to PortM aster Mailin g Lists xvi INA Module Instal lat ion and Configurat ion Gu ide • portmaster -radius —a discussion of g eneral and specifi c RADIUS issue s, including configuration a nd troubleshooting suggestions. T o subs cribe, send email to majordo mo@livingston. com with su bscribe portmaster-radius in the body of the me ...

  • Lucent Technologies Network Access Module - page 17

    1-1 INA Module 1 This chap ter introdu ces the MER LIN Integrate d Network Acce ss (INA) modul e and provides an ove rview of its insta llation and configuration. The following topics a re discusse d: • “IN A Module Descr iption” on page 1-1 • “IN A Administr ation” on pag e 1-1 • “INA Fron t Panel” on page 1-2 • “Installat io ...

  • Lucent Technologies Network Access Module - page 18

    INA Front Pa ne l 1-2 INA Module Installat ion and Configuration Gu ide 1. Arran ge with your telecommunications service provider (telco) for a T1/P RI lin e. 2. Have the tel co prov ision t h e li ne so that some channe ls are assigne d to switc hed voi ce cal ls and th e res t are assi gned to one o r more p oint- to-poi nt data co nnecti ons. 3. ...

  • Lucent Technologies Network Access Module - page 19

    INA Module 1-3 INA Front Pa ne l Figure 1-1 INA Module Front Panel DIP Swi tches . DIP sw itch 1 controls the configuration of serial port C0. DIP switch 2 controls Co mOS boot b ehavior . See “Set DIP Switches” on pag e 3-2. System LE D. This L ED indica tes the s tatus of the rou ting hardwa re and the ComOS. One bl ink eve ry 5 second s ind ...

  • Lucent Technologies Network Access Module - page 20

    Installation and Configu ration Steps 1-4 INA Module Installat ion and Configuration Gu ide Ether net Por t. This RJ -45 connector provides a 10Base T Etherne t connection . See “Connect an Etherne t Cabl e” on page 3-4. Ethe rnet Li nk LED . This green LED indicates link integrity to a 10BaseT hub. See “Ethernet LEDs” on page 3-6. Reboot B ...

  • Lucent Technologies Network Access Module - page 21

    2-1 Getting Ready for Configuration 2 T o properly conf igure your INA module, you must gather all the technical info rmation needed. Y ou must also assign T 1/PRI channels us ing the ME RLIN MAGIX ad ministration console before using t he INA module. Before sta rting the ins tallation of your module, be sure that you ha ve all need ed information ...

  • Lucent Technologies Network Access Module - page 22

    Network S ettings 2-2 INA Module Installat ion and Configuration Gu ide for PRI configur ations and channel s ignaling types for T1 configurations. Y ou plan for and im plement these ad ditional se ttings a s you do fo r a 100D modu le. See the System Programmin g man ual (555-71 0-111). Assign T1/PRI Channels The INA mod ule can a ccommod ate up t ...

  • Lucent Technologies Network Access Module - page 23

    Getting Ready for Con figuration 2-3 Network Settings • See “Set Up Addition al W AN Ports ” on page 6-7. Ta b l e 2 - 2 Basic Networ k Configuration S ettings for the INA Module Settin gs Note s Exampl e Ether0 address IP address of the Eth er0 port on the INA module. 192.19 8.32. 2 Ether0 net mask 255.25 5.255 .0 System name Optional. Mysys ...

  • Lucent Technologies Network Access Module - page 24

    Network S ettings 2-4 INA Module Installat ion and Configuration Gu ide DLCI list For Frame Relay connections for which you manually enter a list. E nter each DLCI number (1 to 1023), a colon (:), and the IP ad dress of the ro uter repres ented by the DLC I. 16:17 2.26.13 1.37 Dynamic Host Connect ion Protocol (D HCP) server addres s If you use DHC ...

  • Lucent Technologies Network Access Module - page 25

    3-1 Installing the INA Mo dule 3 This chap ter descri bes the steps needed to physica lly install and pow er up the INA MERLI N MAGIX system . The follow ing to pics are discusse d. • “Install the INA M odule in a Carrier” on pag e 3-1 • “Co nnect Cables” o n page 3- 1 • “Obse rve LED Be havior” on page 3- 4 Install the INA Module ...

  • Lucent Technologies Network Access Module - page 26

    Connect Ca bl es 3-2 INA Module Installat ion and Configuration Gu ide Figure 3-1 C1 Se rial Passth rough Port Set DIP Switches The DIP sw itc he s (F ig ur e 3-2 ) mu st be se t t o th e c or re ct p ositio ns fo r th e I NA mo dule t o operate p roper ly . 1. Set DIP switch 1 to the ri ght. Figure 3-2 DIP Sw itch es When DIP switch 1 is set to th ...

  • Lucent Technologies Network Access Module - page 27

    Installing the INA M odule 3-3 Connect Ca b les When DIP switch 2 is s et to the left (Fig ure 3-2), and the INA modul e is turned on, the INA modu le boots (lo ads the C omOS soft ware) from the inte rnal nonvo latile RAM. T his is the d efault se tting for the module. When DIP switch 2 is set to t he right, a nd the INA mod ule is tu rned o n, t ...

  • Lucent Technologies Network Access Module - page 28

    Observe LE D Behavior 3-4 INA Module Installat ion and Configuration Gu ide Figure 3-4 T1/PRI C onnection Connect an Ethernet Cable Use a categ ory 5 twiste d pair cabl e, as speci fied by the E IA/TIA-568- B wirin g standard, with an RJ-48 C connector to con nect the INA Etherne t connector (Fig ure 3 -5) to the neares t network hub. See “Ethern ...

  • Lucent Technologies Network Access Module - page 29

    Installing the INA M odule 3-5 Observe LED Beh avior Figure 3-6 T1/PRI ( DS-1) LEDs • Red illuminated indicates th at there is an erro r condit io n on the line or that the INA module is in the standb y mode. When in standb y mode, the module is not operationa l for T1/PRI se rvices. This LED st ays illuminated fo r approximat ely 15 to 30 secon ...

  • Lucent Technologies Network Access Module - page 30

    Observe LE D Behavior 3-6 INA Module Installat ion and Configuration Gu ide After the module has been p owered up and l oading is comple te, make su re that the LE D is blinking off once every 5 seconds. Th e INA mo dule takes a bout 20 secon ds to reach this s tate. Ethernet LEDs These LE Ds (Figur e 3-8 ) show t he statu s of the E thernet connec ...

  • Lucent Technologies Network Access Module - page 31

    4-1 Using the INA W izard 4 The INA W izard prog ram provi des basi c configura tion setting s for the INA module. Th e wizard us es a gra phical user interface (GUI) to g uide you step by step th rough the configuration proce ss. The progra m runs o n platfo rms that use Micros oft Windows 95, W indow s 98, or W indow s NT 4.0 and la ter . A platf ...

  • Lucent Technologies Network Access Module - page 32

    Run the Wi za rd ...

  • Lucent Technologies Network Access Module - page 33

    5-1 Using the Command Line Interface 5 The ComOS comma nds can be used to configure the INA mod ule directly through the ComOS command line interface. Y ou access th e command line inter face through the console port C0 using a terminal or PC ru nning a terminal emulator . Once the module has bee n connected t o a netwo rk, the best way to access t ...

  • Lucent Technologies Network Access Module - page 34

    Log In 5-2 INA Module Installat ion and Configuration Gu ide Using a T elnet Session Once the INA mo dule has been conne cted to a net work and an Eth ernet addres s has been ass igned, T elnet is the be st way to establ ish a consol e session. 1. R un a T eln et applic ation fr om a networ k connec ted work station. 2. S elect the c onnect fu ncti ...

  • Lucent Technologies Network Access Module - page 35

    Using the Command Lin e Inte rface 5-3 Set the Ether0 Network Ad dress Command> set password [ Password ] Command> save all Caut io n – Change the admin istrativ e password each time you gi ve it to so mone outsid e the o rgani zati on fo r serv icin g. Set the Ether0 Network Address Y ou can set an IP and IPX a ddress on the INA module . B ...

  • Lucent Technologies Network Access Module - page 36

    Set the System Nam e 5-4 INA Module Installat ion and Configuration Gu ide Set the System Name The system name iden tifies th e INA modul e for Simple Ne twork Mana gement Protocol (SNMP ) queri es, IPX proto col routing, and Ch alleng e Hand shak e Auth entic ation Protocol (C HAP) authe ntication. Use these commands t o set th e syst em nam e: Co ...

  • Lucent Technologies Network Access Module - page 37

    Using the Command Lin e Inte rface 5-5 Configure the WAN Port Set the Name Service The INA mod ule suppor ts eithe r the NIS or the DNS. See the PortM aster Configuratio n Guide for more i nformation on name se rvices. Use these comm ands to se t the name se rvice: Command> set namesvc dns | nis Command> save all Once the name se rvice is se ...

  • Lucent Technologies Network Access Module - page 38

    Configure the WA N Port 5-6 INA Module Installat ion and Configuration Gu ide Note – B e sure t o rese t the W AN port or rebo ot the router a fter ma king ch anges to the W AN port configurat ion. T o reboot, enter the reboot command o r press the reboot button on th e INA module. Set the Channel Rate Almost all data channels have a channel rate ...

  • Lucent Technologies Network Access Module - page 39

    Using the Command Lin e Inte rface 5-7 Configure the WAN Port Command> set W1 address Ipaddress Command> save all Set the Destination IP Address The des tination I P addr ess is th e IP addr ess or hos tname of the machi ne on th e other end of the connection. The dest inatio n IP addr ess can a lso be set to 255.255. 255 .255 for PPP user s. ...

  • Lucent Technologies Network Access Module - page 40

    Configure the WA N Port 5-8 INA Module Installat ion and Configuration Gu ide ...

  • Lucent Technologies Network Access Module - page 41

    6-1 Using PMV ision 6 PMV ision is a Java -based program wi th a gra phical user interface (GUI) that can be used to monitor and configure the INA module. Information about us ing PMVi sion on other platforms ca n be found in the PMV ision U ser’ s G uide , which describes the capa bilities of PMV ision in more detail. PMV ision ru ns on plat for ...

  • Lucent Technologies Network Access Module - page 42

    Run PMVision 6-2 INA Module Installat ion and Configuration Gu ide Using a Crossover Cable An indepe ndent la ptop or deskt op works tation e quipped with a netwo rk interface card can be us ed to run PM V ison. Connect an Ethernet cr ossover cab le between t he Ethernet connection on the workstation and the Ethernet port on the INA mo dule. (See ? ...

  • Lucent Technologies Network Access Module - page 43

    Using PMVision 6-3 Communicate with the INA Modul e Figure 6-1 PMVision Main Screen Communicate with the INA Module Select Devi ce from th e menu ba r , an d click Co nne ct to establish communications between PMV ision and your INA module . The conne ction dialog box appear s (Figur e 6 -2). Ente r the IP a ddress or Domain Name System (DN S) name ...

  • Lucent Technologies Network Access Module - page 44

    Selecti ng PMV ision Functi ons 6-4 INA Module Installat ion and Configuration Gu ide Figure 6-2 Connection Dialog When the connection has been made, information about the INA module appears in the connection panel. The INA module information line is highlighted, indicat ing that the INA modu le is active and can be con trolled by PMV ision. PM V i ...

  • Lucent Technologies Network Access Module - page 45

    Using PMVision 6-5 Selecting PMVision Fun ctions Figure 6-4 Configuratio n Panel Example W orking with Configurat ion Displays Displ ays (Fi gure 6-5) h ave two or more c ontrol but tons at the b ottom. Click the Add button to a dd a new entry a nd display a co nfiguration panel. Enter the data and click Save. Y ou ca n e dit o r de lete a s ett in ...

  • Lucent Technologies Network Access Module - page 46

    Selecti ng PMV ision Functi ons 6-6 INA Module Installat ion and Configuration Gu ide Ether0 net mask INA → Configure → Ethernets , Edit IP netm ask System na me INA → Configure → SNMP System na me Defa ult ga teway INA → Configure → Global IP gate way Name service type INA → Configure → Global Name se rvic e Name s erver a ddress I ...

  • Lucent Technologies Network Access Module - page 47

    Using PMVision 6-7 Selecting PMVision Fun ctions Set Up Additional W AN Ports If the data channel s assigned to t he INA mod ule supp ort multiple W AN ports, y ou must set up additiona l W AN ports as follows : 1. Select the IN A → Configure → L ine s function fro m the contro l tree. 2. Select the line0 entry in th e main pan el, an d click t ...

  • Lucent Technologies Network Access Module - page 48

    Selecti ng PMV ision Functi ons 6-8 INA Module Installat ion and Configuration Gu ide Figure 6-6 PMV ision Back up Dialog Restor e the INA M odu le Sett ings T o r estor e the INA mo dule se ttin gs ca pture d in a b acku p file , se lect INA → Maintain → Restore . Enter or browse t o the backup filename on the Restor e panel (Figure 6-7) and c ...

  • Lucent Technologies Network Access Module - page 49

    A-1 T roubleshooting A This app endix provi des the fol lowing troubles hooting proce dures for the INA m odule: • “Obse rving LED Be havior” on page A-1 • “Obse rving Boot Me ssages ” on pa ge A-2 • “Using the DS-1 T est Jacks ” on page A- 5 Additional troubleshooting and maintenance infor mation can also be found in Appendix C, ...

  • Lucent Technologies Network Access Module - page 50

    Observing Boot Messages A-2 INA Module Instal lat ion and Configurat ion Gu ide Observin g Boot Message s If you are havi ng diff iculty booti ng the IN A module and are unab le to is olate t he problem b y observin g LED behav ior , b oot the INA modu le in consol e mode an d check the boo t messag es. Follow these instruction s to check boot mess ...

  • Lucent Technologies Network Access Module - page 51

    A-3 Observing Boot Messages 2. Press the reboo t button. 3. Observe the boot messages di splayed on th e console scree n. Note – B oot message s vary slig htly , depen ding on the v ersion of the PROM and ComOS. The fol lowing exampl e is from an INA module: INA PROM 2.33, 8/19/99 Testing System Clock...OK Sizing System Memory...4MB FPM CPU 486DX ...

  • Lucent Technologies Network Access Module - page 52

    Observing Boot Messages A-4 INA Module Instal lat ion and Configurat ion Gu ide Use T able A-2 to interpr et possible diagnostic b oot messag es. Ta b l e A - 2 Inter preti ng Diagn ostic Boot Mess ages Field Possibl e Message Explana tion INA PROM N V ersion number of t he installe d boot PROM. T estin g System Clock ERROR This er ror indic ates a ...

  • Lucent Technologies Network Access Module - page 53

    A-5 Using the DS-1 Test Jacks Usin g the DS -1 T e st Ja cks The si x test ja cks provid e the means t o connect e xternal te st equipme nt to the T1/PRI line. T able A-3 descri bes the functions of the indiv idual jacks. Fig ure A-1 illustrates the test j ack locations. Figure A-2 shows the test ja ck configura tion. Setting up ACC 2188 PCI Contro ...

  • Lucent Technologies Network Access Module - page 54

    Using the DS-1 Test Jacks A-6 INA Module Instal lat ion and Configurat ion Gu ide Ta b l e A - 3 DS- 1 T est Jacks Descr ipti on T est Jack La bel Descript ion and Usage MON In Monitor In . This jack allows ext ernal test equipme nt to passive ly mon itor the T1/PRI signal coming fr om the networ k to the INA module. Th e use of this jack does not ...

  • Lucent Technologies Network Access Module - page 55

    A-7 Using the DS-1 Test Jacks Figure A-1 DS-1 T est Ja ck Locations Figure A-2 DS-1 T est Ja ck Configurat ion 1210-011 M O N I N I N I N O U T O U T M O N N E T N E T E Q P T E Q P T O U T ...

  • Lucent Technologies Network Access Module - page 56

    Using the DS-1 Test Jacks A-8 INA Module Instal lat ion and Configurat ion Gu ide ...

  • Lucent Technologies Network Access Module - page 57

    B-1 Cable Specifications B This appendix p rovides cable a nd pino ut specif ications . Cables Specified • Cons ole Cabl e . This null modem cable is used to connect a terminal or PC to the con sole port of t he INA modu le. • T1/P RI Cab le. Th is cable is used to connect a T1/PRI line to the INA module. • Ether ne t I nt erfa ce C abl e. T ...

  • Lucent Technologies Network Access Module - page 58

    T1/PRI C able B-2 INA Module Installat ion an d C onfiguration Guid e T1/PRI Cable T able B-2 shows th e pinouts for a catego ry 5 unshielde d, ungrounded, twiste d pair cable, as specif ied by th e EIA/TIA- 568-B wir ing standa rd, with a n RJ-48 C connection Ethernet Interface T able B-3 provides specifications f or the 10Mbps bas eband IEEE 802. ...

  • Lucent Technologies Network Access Module - page 59

    B-3 Crossover Cable Cross over Cable This RJ-4 5 crossove r cable is us ed to connect two (and onl y two) ma chines usin g 10baseT Ethernet without t he use of a hub. Th e cable mu st be fabricated from cate gory 5 unshielde d twiste d pair . T able B -4 show s the wiring for this cable. Ta b l e B - 4 Crossov er Cab le Wiring RJ-45 Connector RJ-45 ...

  • Lucent Technologies Network Access Module - page 60

    Crossover Cable B-4 INA Module Installat ion an d C onfiguration Guid e ...

  • Lucent Technologies Network Access Module - page 61

    C-1 MERLIN MAGIX Administration C This app endix descri bes the M ERLIN M AGIX sys tem program ming optio ns for the INA module. Th e INA mo dule is identi fied as a 10 0R mo dule in MERL IN MAGIX progra mming and console dis plays. The follo wing topics ar e covered: • “IN A Module S ystem Pro grammi ng Summa ry” on pa ge C - 1 • “IN A M ...

  • Lucent Technologies Network Access Module - page 62

    INA Modul e Admi nis tratio n Option s C-2 INA Module Installat ion and Configurat ion Gu ide The rest of the adm inistrati on option s are essen tially the s ame as for the 100D mo dule. For more inform ation on configuring the 100D mod ule, see System Programming manual (555-710- 111). Activate or Deactivate the Onboar d CSU The intern al CSU on ...

  • Lucent Technologies Network Access Module - page 63

    C-3 INA Module Ma int enance Op tions Note – F or T1 configurat ions, you can assign a channel to the router only if the channel is Unequipped from a swi tch perspecti ve. For PRI con figurat ions, you can assign a channel to the router only if the channel is not used in a B channel group or a line pool on the switch . Note – For the router to ...

  • Lucent Technologies Network Access Module - page 64

    INA Module Mainte nance Options C-4 INA Module Installat ion and Configurat ion Gu ide Note – The ad ditiona l error e vent counts are cl eared wh enever the INA modul e is re set. Be sure to view the e rror events before re setting t he module or busying ou t the module. From your sy stem progra mming console, use the fol lowing sequence to acce ...

  • Lucent Technologies Network Access Module - page 65

    C-5 INA Module Ma int enance Op tions Each erro r statistic re present s the sum of error events fr om all va lid inte rvals inc luding the curre nt inter val. The m essage “9 999” rep resents an overfl ow situa tion. Y ou can refresh the 24-hour t otal screen by p ressing → Ba ck and then pr essi ng → 24 h r total agai n. Current Events Th ...

  • Lucent Technologies Network Access Module - page 66

    INA Module Mainte nance Options C-6 INA Module Installat ion and Configurat ion Gu ide Demand T ests The INA module board inco rporates t hree new demand t ests: • Line loopback • Payloa d loopback • Bi t error ra te test (BERT) Line Loopback T e st The line lo opback te st loops t he T1 sign al back to wards the network w ithout regenerating ...

  • Lucent Technologies Network Access Module - page 67

    C-7 INA Module System Interactions T able C-4 desc ribes the availa ble BE RT test patte rns. After st arti ng a BERT t est, pres s → Monitor to view the prog ress of the tes t. One of the following results will be dis played. • No Sync h— Indicate s that the BERT test patte rn is not being su ccessful ly received back. • Sync-Errors —Ind ...

  • Lucent Technologies Network Access Module - page 68

    INA Module System Interactions C-8 INA Module Installat ion and Configurat ion Gu ide Boar d Renum bering The INA mod ule works in the same manner as the 100D m odule for board renum bering. Us e board ren umberi ng to repl ace a 100D m odule wit h a 100R mod ule, and vice ve rsa. Aft er the bo ard renumb ering, T1/PRI da ta that ha d been pre viou ...

  • Lucent Technologies Network Access Module - page 69

    C-9 INA Module System Interactions System Erase (Frigi d Start ) Whe n a frigid sta rt occurs, all MERL I N MAGIX paramete rs fo r the IN A module are retu rned to default v alues. Ro uter ad ministrat ion da ta, however , is preserved . MERL IN MAGIX paramete rs must b e repr ogrammed after t he frigid st art to restor e voice and da ta service s. ...

  • Lucent Technologies Network Access Module - page 70

    INA Module System Interactions C-10 INA Module Instal lation and Configur ation Guid e ...

  • Lucent Technologies Network Access Module - page 71

    Index-1 Index Numerics 100D module C-1 operation 2 -2 renumb ering boards C- 8 24-hour event t otals C- 4 A activate or deact ivate CSU 2 -1 , C-2 administrat ion option s C- 1 administ rativ e pa ssword 5-2 B B8ZS encoding 2 - 1 , C-1 back up INA module settings 6-7 MERLIN MA GI X se tt ings C-7 BERT C- 6 bipolar 8-zero s ubst itutio n. See B 8ZS ...

  • Lucent Technologies Network Access Module - page 72

    Index Index-2 INA Module Installat ion an d C onfiguration Guid e pinout B -3 PMV ision 6- 2 CSU activate or de activa te 2-1 , C-2 line buildout C- 2 CSU/DSU 1-1 curren t ev en ts C-5 D data cha nnels desc rip tion 1-1 first cha nne l ass ign ed 2-3 unassigning C-3 data link connection identifier . See DLCI settings data service unit. See DSU dele ...

  • Lucent Technologies Network Access Module - page 73

    Index Index-3 system interactions C-7 system prog ram m ing su mm ary C -1 INA Wizard desc rip tion 1-2 installation 4-1 operation 4 -2 system require m en ts 4 -1 inawizard_install.exe 4 -1 INA W izar d work stati on connection wit h crossover cable 4-2 LAN connection 4-1 injury risk ix installation INA module 3-1 INA Wizard 4-1 PMV ision 6- 1 ste ...

  • Lucent Technologies Network Access Module - page 74

    Index Index-4 INA Module Installat ion an d C onfiguration Guid e Point-to-Point protocol. Se e proto col, W AN po rt PPP . See protocol, W AN port precautions, safe ty ix print reports C-8 protocol, W AN port 2- 3 , 5-7 , 6 -6 R reboot button, location 1 -4 removing data channels C-3 renumb ering boards C- 8 reports C - 8 restoring INA module sett ...

  • Lucent Technologies Network Access Module - page 75

    Index Index-5 W W AN port addition al 2-2 channel ra te 2-3 , 5- 6 filters 5-7 protocol 5- 7 rebooting 5 -6 settin g 5-5 settin g with P MV ision 6-7 warm st art C -9 warning icon xiv warran ty xv W inSPM pass th ro ug h o p tio n 5 -1 , 5-2 utility 1-1 wizard. See INA W izard ...

Manufacturer Lucent Technologies Category Network Card

Documents that we receive from a manufacturer of a Lucent Technologies Network Access Module can be divided into several groups. They are, among others:
- Lucent Technologies technical drawings
- Network Access Module manuals
- Lucent Technologies product data sheets
- information booklets
- or energy labels Lucent Technologies Network Access Module
All of them are important, but the most important information from the point of view of use of the device are in the user manual Lucent Technologies Network Access Module.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Lucent Technologies Network Access Module, service manual, brief instructions and user manuals Lucent Technologies Network Access Module. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Lucent Technologies Network Access Module.

Similar manuals

A complete manual for the device Lucent Technologies Network Access Module, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Lucent Technologies Network Access Module by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Lucent Technologies Network Access Module.

A complete Lucent Technologies manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Lucent Technologies Network Access Module - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Lucent Technologies Network Access Module, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Lucent Technologies Network Access Module, that we can find in the current document
3. Tips how to use the basic functions of the device Lucent Technologies Network Access Module - which should help us in our first steps of using Lucent Technologies Network Access Module
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Lucent Technologies Network Access Module
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Lucent Technologies Network Access Module in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Lucent Technologies Network Access Module?

Use the form below

If you did not solve your problem by using a manual Lucent Technologies Network Access Module, ask a question using the form below. If a user had a similar problem with Lucent Technologies Network Access Module it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)