Manual PYLE Audio PTA3000

13 pages 1.46 mb
Download

Go to site of 13

Summary
  • PYLE Audio PTA3000 - page 1

    PROFESSIONAL POWER AMPLIFIER OPERA TING GUIDE PT A3000 ...

  • PYLE Audio PTA3000 - page 2

    Intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’ s enclosure that may be sufficient magnitude to constitute a risk of electric shock to persons. Intended to alert the user of the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. ...

  • PYLE Audio PTA3000 - page 3

    2 12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacture, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over . 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. R efer all servicing to qual ...

  • PYLE Audio PTA3000 - page 4

    Thanks for choose our series amplifier . The amplifier features a two-way crossover and sub-sonic (low-cut) filter for each channel. Crossover frequencies are fixed at 150 Hz, allowing subwoofers to be driven at extremely high sound pressure levels, and the filters cut at 40 Hz to prevent low-end rumble. Using proven technology gained through years ...

  • PYLE Audio PTA3000 - page 5

    (1) INPUT GAIN (dB) These controls are used to adjust the input gain of each channel. They determine how loud each channel of the power amplifier will sound for a given input signal level. Maximum input gain is achieved at the fully clockwise setting, and this setting yields maximum mixer/system headroom. A setting of less than fully clockwise will ...

  • PYLE Audio PTA3000 - page 6

    ( 7) IEC MAINS CONNECT OR This is a standard IEC power connector . An AC mains cord having the appropriate AC plug and ratings for the intended operating voltage is included in the carton. U.S. DOMESTIC AC MAINS CORD The mains cord supplied with the unit is a heavy-duty , 3-conductor type with a conventional 120 V AC plug with ground pin. It should ...

  • PYLE Audio PTA3000 - page 7

    6 (9) SPEAKON OUTPUTS The amplifiers utilize three 4-conductor Speakon connectors, one for each channel and one for BRIDGE mode. Please refer to the BRIDGE MODE section of this manual before attempting to use this mode. For each channel Speakon, the same impedance rules apply as with the binding posts. Internally , all the Speakons are wired in wha ...

  • PYLE Audio PTA3000 - page 8

    (14) LOW CUT SWITCH This switch is used to activate the LOW CUT filter for the corresponding channel. It is again a push-push type switch, requiring a small "tool" to activate. The IN position routes the input signals through the 40 Hz LOW CUT filter , while the OUT position bypasses the filter . This filter will cut extremely low frequen ...

  • PYLE Audio PTA3000 - page 9

    levels occur Then, as temperatures in the amplifier heat sinks increase, the automatic thermal-sensing circuitry will cause high-speed operation to occur . Depending upon signal conditions and amp loading, high-speed fan operation may continue or the fan may cycle continuously between high and low . This situation is quite normal. If cooling is ina ...

  • PYLE Audio PTA3000 - page 10

    AMPLIFIER CONFIGURA TIONS ...

  • PYLE Audio PTA3000 - page 11

    10 ...

  • PYLE Audio PTA3000 - page 12

    100dB, unweighted 100dB, unweighted 100dB, unweighted 100dB, unweighted 100dB, unweighted 100dB, unweighted 100dB, unweighted 100dB, unweighted 10K Ohms per leg 10K Ohms per leg 10K Ohms per leg 10K Ohms per leg 10K Ohms per leg 10K Ohms per leg 10K Ohms per leg 10K Ohms per leg 300W RMS/chan 400W RMS/chan 500W RMS/chan 600W RMS/chan 700W RMS/chan ...

  • PYLE Audio PTA3000 - page 13

    PyleAudio.com 718.535.1800 718.236.2400 (fax) 1600 63rd Street, Brooklyn NY 11204 ...

Manufacturer PYLE Audio Category Stereo Amplifier

Documents that we receive from a manufacturer of a PYLE Audio PTA3000 can be divided into several groups. They are, among others:
- PYLE Audio technical drawings
- PTA3000 manuals
- PYLE Audio product data sheets
- information booklets
- or energy labels PYLE Audio PTA3000
All of them are important, but the most important information from the point of view of use of the device are in the user manual PYLE Audio PTA3000.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals PYLE Audio PTA3000, service manual, brief instructions and user manuals PYLE Audio PTA3000. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product PYLE Audio PTA3000.

A complete manual for the device PYLE Audio PTA3000, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use PYLE Audio PTA3000 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of PYLE Audio PTA3000.

A complete PYLE Audio manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual PYLE Audio PTA3000 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the PYLE Audio PTA3000, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the PYLE Audio PTA3000, that we can find in the current document
3. Tips how to use the basic functions of the device PYLE Audio PTA3000 - which should help us in our first steps of using PYLE Audio PTA3000
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with PYLE Audio PTA3000
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of PYLE Audio PTA3000 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning PYLE Audio PTA3000?

Use the form below

If you did not solve your problem by using a manual PYLE Audio PTA3000, ask a question using the form below. If a user had a similar problem with PYLE Audio PTA3000 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)