English dropdown-ico

Manual NEC mL5

15 pages 2.52 mb
Download

Go to site of 15

Summary
  • NEC mL5 - page 1

    NEC PowerMate ML5 Disassembly Manual ...

  • NEC mL5 - page 2

    NEC PowerMate ML5 Disassembly Manual Page 2 Table of contents Overview ....................................................................................................................... ..........................................3 Technician Notes .................................................................................................. ...

  • NEC mL5 - page 3

    NEC PowerMate ML5 Disassembly Manual Page 3 Overview This document contains st ep-by-step disassembly in structio ns for the PowerMate ML5 chassis. The instru ctions are illustrated where necessa ry with images of the part that is being removed or disassembled. Furthermore, the screws that are removed are shown next to the image of the parts them s ...

  • NEC mL5 - page 4

    NEC PowerMate ML5 Disassembly Manual Page 4 Hazardous Voltage There is hazardous voltage present insi de the computer when it is connected to an AC supply, even when the computer’s power switch is off. Exposure to hazardous voltage could cause personal injury. To avoid risk of injury, contact an Authorized Service Provider for proper (un)installa ...

  • NEC mL5 - page 5

    NEC PowerMate ML5 Disassembly Manual Page 5 Removing the Stabilisers To remove the stabilisers follow the next steps: 1. Place the computer body with the bottom side protruding a little away from the edge of a table. 2. Free the locks C and slice the stabili sers as indicated by the arrows A and B, towards the front of the system for stabiliser A a ...

  • NEC mL5 - page 6

    NEC PowerMate ML5 Disassembly Manual Page 6 Fig. 3: Removing the cover of the chassis Note: To prevent damaging the system, make sure no cables or other devices protrude from the chassis before replacing the c over. Removing the Riser Board Br acket and the Raiser Boar d To remove the riser board bracket first remove the stabilisers (see Removing t ...

  • NEC mL5 - page 7

    NEC PowerMate ML5 Disassembly Manual Page 7 Fig. 5: Removing the riser board Removing a PCI or CNR Expansion Card To remove a PCI or CNR expansion card , first remove the stabilise rs (see Removing the Stabilisers ), open the chassis (see Ope ning the Chassis ), remove the riser board bracket (see Removing the Riser Board Bracket and the Riser Boar ...

  • NEC mL5 - page 8

    NEC PowerMate ML5 Disassembly Manual Page 8 3. Carefully extract the AGP expansion ca rd from its slo t and put it aside. Removing the Floppy Disk Drive To remove the floppy disk drive, first remove the stabilisers (see Removing the Stabilisers ), open the chassis (see Opening the Chassis ), then follow the next steps: 1. Remove the one screw secur ...

  • NEC mL5 - page 9

    NEC PowerMate ML5 Disassembly Manual Page 9 Note: When reassembling the flopp y disk drive, slide the flopp y disk drive bracket in the chassis, taking care that the tabs (A, B, C, D) of the bracket fit perfectly in the correspondin g holes of the chassis. 4. Remove the two screws securing t he floppy disk drive to the bracke t. Fig. 10: Screws sec ...

  • NEC mL5 - page 10

    NEC PowerMate ML5 Disassembly Manual Page 10 Fig. 12: Removing the converter boar d 4. Remove the two screws securing the opt ical device drive to its bracket and put it aside. Fig. 13: Removing the optical devic e drive from its bracket Removing the Hard Disk Drive To remove the hard disk drive, first remove the stabilisers (see Removing the Stabi ...

  • NEC mL5 - page 11

    NEC PowerMate ML5 Disassembly Manual Page 11 Fig. 14: Extracting hard disk drive assembly 4. Remove the four screws (two on e ach side) fixing the hard disk drive to the bracket, slide the hard disk drive out of the bracket and put it aside. Fig. 15: Freeing the hard disk drive from the br acket Removing the Power Supply Unit To remove the power su ...

  • NEC mL5 - page 12

    NEC PowerMate ML5 Disassembly Manual Page 12 1. Disconnect the aux iliary fan connector from the motherboard. 2. Remove the screws shown in the picture below. Take the aux iliary system fan out of the chassis and put it aside. Fig. 17: Removing the auxil iary system fan Removing the CPU To remove the CPU, first remove the stabilisers (see Removing ...

  • NEC mL5 - page 13

    NEC PowerMate ML5 Disassembly Manual Page 13 Fig. 19: Removing the second serial port 3. Take the second serial port out of the chassis and put it aside. Removing the Switch/ LED board To remove the Switch/LED board, first remove the stabilisers (see Removing the Stabilisers ), open the chassis (see Opening the Chassis ), then follow the next steps ...

  • NEC mL5 - page 14

    NEC PowerMate ML5 Disassembly Manual Page 14 Fig. 21: Removing the internal speake r 2. Take the speaker off the chassis and p ut it aside. Removing the Motherboard To remove the motherboard, first remove the stabili sers (see Removing the Stabilisers ), open the chassis (see Ope ning the Chassis ), remove the ri ser board bracket (see Rem oving th ...

  • NEC mL5 - page 15

    NEC PowerMate ML5 Disassembly Manual Page 15 Notice The information in this guide is subject to change without notice. This guide contains information prote cted by copyright. No part of this guide may be photocopied or reproduced in any form or by any means without prior writt en consent from NEC Computers International BV. NEC COMPUTERS INTERNATI ...

Manufacturer NEC Category Personal Computer

Documents that we receive from a manufacturer of a NEC mL5 can be divided into several groups. They are, among others:
- NEC technical drawings
- mL5 manuals
- NEC product data sheets
- information booklets
- or energy labels NEC mL5
All of them are important, but the most important information from the point of view of use of the device are in the user manual NEC mL5.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals NEC mL5, service manual, brief instructions and user manuals NEC mL5. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product NEC mL5.

Similar manuals

A complete manual for the device NEC mL5, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use NEC mL5 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of NEC mL5.

A complete NEC manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual NEC mL5 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the NEC mL5, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the NEC mL5, that we can find in the current document
3. Tips how to use the basic functions of the device NEC mL5 - which should help us in our first steps of using NEC mL5
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with NEC mL5
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of NEC mL5 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning NEC mL5?

Use the form below

If you did not solve your problem by using a manual NEC mL5, ask a question using the form below. If a user had a similar problem with NEC mL5 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)