English dropdown-ico

Manual Asante Technologies 10Base2

26 pages 0.34 mb
Download

Go to site of 26

Summary
  • Asante Technologies 10Base2 - page 1

    Mini MAU Installation Guide   ...

  • Asante Technologies 10Base2 - page 2

    Copyright Notice Copyright 1993 by Asanté T echnologies, Inc. All rights reserved. No part of this manual, or any associated artwork, software, product design or design concept, may be copied, reproduced or stored, in whole or in part, in any form or by any means mechanical, electronic, optical, photocopying, recording or otherwise, including tran ...

  • Asante Technologies 10Base2 - page 3

    T echnologies, Inc. for a Returned Merchandise Authorization (RMA) number , that (2) you clearly write the RMA number on the outside of the package, and that (3) you return it, postage prepaid, during the warranty period. This warranty is exclusive and is limited to Asanté Ethernet network interface products. This warranty shall not apply to Asant ...

  • Asante Technologies 10Base2 - page 4

    Mini MAU Page 1 Introduction Thank you for purchasing a Mini MAU from Asanté T echnologies. The Asanté Mini MAU is an ideal network solution for connecting computers and other peripherals with an AUI port to a 10BaseT , 10Base2 or 10BaseFL Ethernet network. minimau Page 1 Monday, August 26, 1996 11:02 AM ...

  • Asante Technologies 10Base2 - page 5

    Mini MAU Page 2 Asking for assistance T o contact Asanté T echnical Support for help: T echnical Support Hours 6:00 AM to 6:00 PM Pacific Standard T ime, Monday—Friday Telephone (800) 622-7464 (408) 435-0706 Fax (408) 432-6018 Applelink mail ASANTE.TECH Internet mai l support@asante.com minimau Page 2 Monday, August 26, 1996 11:02 AM ...

  • Asante Technologies 10Base2 - page 6

    Mini MAU Page 3 Product Overview Asanté Mini MAUs The Asanté Mini MAU plugs directly onto the back of your PC, Macintosh or any other network device that has a AUI inter - face. Asanté offers three types of MAUs: ❏ AUI to Mini MAU Unshielded T wisted Pair (UTP) ❏ AUI to Mini MAU Thin Coax ❏ AUI to Mini MAU Fiber The Mini MAUs are compatibl ...

  • Asante Technologies 10Base2 - page 7

    Mini MAU Page 4 Summary of Mini MAU Features • Standards based transceivers for unshielded twisted pair (UTP), thin and fiber -optic Ethernet. • Full compatibility with IEEE 802.3 specifications for 10BaseT , 10Base2, and 10BaseFL Ethernet. • Diagnostic LEDS • Ability to turn HBE on or off. • Can be used as an accessory to AsantéHub 20 ...

  • Asante Technologies 10Base2 - page 8

    Mini MAU Page 5 Mini MA U Media and Connectors Mini MAU Media Connector Port 10BaseT Mini MAU UTP Unshielded T wisted Pair RJ-45 AUI 10BaseFL Mini MAU Fiber ST AUI 10Base2 Mini MAU Thin Coax BNC AUI minimau Page 5 Monday, August 26, 1996 11:02 AM ...

  • Asante Technologies 10Base2 - page 9

    Mini MAU Page 6 Figure 1 Mini MAU for 10BaseT AUI connection (15-pin) RJ-45 connection Six LEDs Switches minimau Page 6 Monday, August 26, 1996 11:02 AM ...

  • Asante Technologies 10Base2 - page 10

    Mini MAU Page 7 Installation Mini MAU The installation of an Asanté Mini MAU is very simple: 1 Locate the AUI port on the device. The AUI is on the rear of your hub or computer . Externally it consists of the 15 pin AUI con- nector . 2 Connect the Mini MAU to the AUI port. 3 Connect the Ethernet cable to the Mini MAU. T wisted-pair cable (10BaseT) ...

  • Asante Technologies 10Base2 - page 11

    Mini MAU Page 8 Figure 2 Mini MAU for Thin Ethernet AUI connection (15-pin) BNC connection Six LEDs Switches minimau Page 8 Monday, August 26, 1996 11:02 AM ...

  • Asante Technologies 10Base2 - page 12

    Mini MAU Page 9 Thin cable (10Base2) with Mini MAU Connect the 10Base2 Mini MAU to the device’ s AUI port. Before the 10Base2 Mini MAU is connected to the thin Ether - net cable, there may be a straight-through (barrel) BNC connector in the cable at the location where a node connec- tion is available. Simply remove the barrel con- nector , and c ...

  • Asante Technologies 10Base2 - page 13

    Mini MAU Page 10 Figure 3 Mini MAU for Fiber AUI connection (15-pin) Fiber connection Six LEDs Switches Fiber connection minimau Page 10 Monday, August 26, 1996 11:02 AM ...

  • Asante Technologies 10Base2 - page 14

    Mini MAU Page 11 Fiber Connect the 10BaseFL Mini MAU to the device’ s AUI port. Connect the Mini MAU fiber connector to the fiber cable with ST connectors. ❖ Note: Check with your network adminis- trator before disconnecting cable. Other users must be warned of the interruption of network operations. Even if the network uses self-terminating ...

  • Asante Technologies 10Base2 - page 15

    Mini MAU Page 12 LEDs and Switches for the Mini MAU Mini 10BaseT MAU LED Display LED Color Status Power on Green MAU ON receiving power from AUI Link Green ON Link OK OFF Link failed Receive Green ON MAU is receiving T ransmit Green ON MAU is transmitting Polarity Y ellow ON MAU polarity is reversed Collision Y ellow ON Collision on Net- work minim ...

  • Asante Technologies 10Base2 - page 16

    Mini MAU Page 13 Switches for 10BaseT MAU There are three switches on the side on the 10BaseT Mini MAU.The default settings for the switches are identified below . ❏ Heartbeat Enable (HBE)func- tion disabled. (1, switch UP) ❏ Link T est (LNK) enabled (1, switch UP) ❏ Polarity Correction (POL) enabled (1, switch UP) HBE Switch If this switch ...

  • Asante Technologies 10Base2 - page 17

    Mini MAU Page 14 ❖ Note: If the MAU is used with a hub or repeater this switch should be disabled. ❖ Link Integrity Enabled T est Switch This switch is normally enabled to verify cable link. This switch can be disabled to work with non-10BaseT compliant repeaters and hubs. Polarity Correction This switch, when enabled, inverts the polarity of a ...

  • Asante Technologies 10Base2 - page 18

    Mini MAU Page 15 Figure 4 Mini MAU Fiber to hub Hub AUI connection (15-pin) 10 Base F MAU Fiber connector 10 Base F network minimau Page 15 Monday, August 26, 1996 11:02 AM ...

  • Asante Technologies 10Base2 - page 19

    Mini MAU Page 16 Mini 10BaseFL MAU LED Color Status Power on Green MAU ON receiving power from AUI Link Green ON Link OK OFF Link failed Receive Green ON MAU is receiving T ransmit Green ON MAU is transmitting Jabber Y ellow ON T ransceiver stops transmitting due to a packet transmis- sion exceeding more than 20 ms. Collision Y ellow ON Collision o ...

  • Asante Technologies 10Base2 - page 20

    Mini MAU Page 17 Switches for 10Base-F MAU The default settings are identified below: ❏ Loopback T est Switch enabled. (1, switch UP) ❏ HBE Switch disabled. (1, switch UP) The default settings are Loopback switch enabled and HBE Switch disabled. Loopback T est Switch When this switch is enabled the AUI trans- mit pair data is looped back to th ...

  • Asante Technologies 10Base2 - page 21

    Mini MAU Page 18 Figure 5 Mini MAU Thin Ethernet to Macintosh Macintosh Mini MAU 10Base2 Thin Ethernet network AUI connector Five LEDs minimau Page 18 Monday, August 26, 1996 11:02 AM ...

  • Asante Technologies 10Base2 - page 22

    Mini MAU Page 19 Mini 10Base2 MAU LED Color Status Power ON Green MAU ON receiving power from AUI HBE ON Green ON HBE is ON Switch set to “Down” (0) posi- tion. Receive Green On MAU is receiving or transmitting T ransmit Green ON MAU is transmitting Jabber Y ellow ON T ransceiver stops transmitting due to a packet transmis- sion exceeding more ...

  • Asante Technologies 10Base2 - page 23

    Mini MAU Page 20 Switches for 10Base2 MAU The default settings are identified below: ❏ T ermination disabled (1, switch UP) ❏ HBE disabled (1, switch UP) T ermination The Mini 10Base2 MAU has a built-in 50ohm termination resistor . This is useful if the user does not have a terminator . If enabled the switch is in the “Down” (0) position a ...

  • Asante Technologies 10Base2 - page 24

    Mini MAU Page 21 ❖ Note : All Asanté MAUS attached to a hub or repeater should have HBE disabled. For example, if the Mini MAU is attached to an AsantéHub 1012 or 2072. ❖ Installing a Mini MAU for the AsantéHub 2072 T o install an Asanté Mini MAU into the recessed port on the double-slotted AsantéHub 2072 do the following: 1 Unscrew the tw ...

  • Asante Technologies 10Base2 - page 25

    Mini MAU Page 22 3 Insert the Mini MAU by hand- guiding it into its recessed slot until the MAU is securely fas- tened to it’ s connector . 4 Re-insert the module into the chassis. minimau Page 22 Monday, August 26, 1996 11:02 AM ...

  • Asante Technologies 10Base2 - page 26

    Mini MAU Page 23 Specifications Mini MAU Power ❏ 120mA@ 11-16VDC from the Ethernet device AUI. Environmental ❏ 1 to 50 C Dimensions ❏ 3.35”x 1.65” x 0.8” minimau Page 23 Monday, August 26, 1996 11:02 AM ...

Manufacturer Asante Technologies Category Network Card

Documents that we receive from a manufacturer of a Asante Technologies 10Base2 can be divided into several groups. They are, among others:
- Asante Technologies technical drawings
- 10Base2 manuals
- Asante Technologies product data sheets
- information booklets
- or energy labels Asante Technologies 10Base2
All of them are important, but the most important information from the point of view of use of the device are in the user manual Asante Technologies 10Base2.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Asante Technologies 10Base2, service manual, brief instructions and user manuals Asante Technologies 10Base2. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Asante Technologies 10Base2.

Similar manuals

A complete manual for the device Asante Technologies 10Base2, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Asante Technologies 10Base2 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Asante Technologies 10Base2.

A complete Asante Technologies manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Asante Technologies 10Base2 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Asante Technologies 10Base2, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Asante Technologies 10Base2, that we can find in the current document
3. Tips how to use the basic functions of the device Asante Technologies 10Base2 - which should help us in our first steps of using Asante Technologies 10Base2
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Asante Technologies 10Base2
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Asante Technologies 10Base2 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Asante Technologies 10Base2?

Use the form below

If you did not solve your problem by using a manual Asante Technologies 10Base2, ask a question using the form below. If a user had a similar problem with Asante Technologies 10Base2 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)