-
Digitus DN-11009 - page 1
Digitus DN-11009 2 USB 2.0 Hi-Speed-Port Multifunction Router User’s Manual V ersion 1.0 ...
-
Digitus DN-11009 - page 2
T able of Content s CHAPTER 1 INTRODUCTION ..................................................................................................... 3 1.1 H AR DWAR E S PECIFICA TION .......................................................................................................... 3 1.2 F EA TURES ............................................... ...
-
Digitus DN-11009 - page 3
Chapter 1 Introduction 1.1 Hardware S pecification Digitus DN-1 1009 is a multifunction router . Besides the basic functions of router , Digitus DN- 1 1009 has two additional USB host ports to support FTP server , print server , and webcam server . The following list shows the hardw are specification for Digitus DN-1 1009. z WA N P o r t x 1 z LAN ...
-
Digitus DN-11009 - page 4
Chapter 2 Product Overview 2.1 Package Content s z Digitus DN-1 1009 z Power adaptor z CD 2.2 Hardware Description 2.2.1 Rear Panel The rear panel incl udes a Power Inlet, a Init Button, four LAN Ports and one W AN Port. Power Inlet : use DC IN 12V/1A adaptor . Init Button : reset the param eters to t he factory default values. LAN Port : for twist ...
-
Digitus DN-11009 - page 5
Off No physical connection to network (LAN1) On Network Connected (LAN2) LAN2 Off No physical connection to network (LAN2) On Network Connected (LAN3) LAN3 Off No physical connection to network (LAN3) On Network Connected (LAN4) LAN4 Off No physical connection to network (LAN4) On USB device connected (USB1) Blinking Connected USB device not suppor ...
-
Digitus DN-11009 - page 6
Chapter 3 Inst allation 3.1 Hardware Connections Make sure that your USB devi ces are powered of f and that the Router ’s Power Adapter is disconnected. Connect your PC to one of the Router ’s LAN port with a twisted-pair category 5 cable, 10baseT or 100baseTX. Connect the Router ’s W AN port to an ADSL modem with a twisted-pair category 5 c ...
-
Digitus DN-11009 - page 7
At control panel, double click Network Connecti ons . All your connections will be displayed on the window . Go to Local Area Connection and click mouse right button. A menu will appear , select Properties . 7 ...
-
Digitus DN-11009 - page 8
At Local Area Connection P roperties window , select the General tab. Select Internet Protocol (TCP/IP) and then click Properties . If you use DHCP to get IP automatically , select Obtain an IP address automatically and then click OK to finish the setting. The router supports D HCP , therefore any PC connected to LAN port of 8 ...
-
Digitus DN-11009 - page 9
the router can automatically get IP address. If you get IP manually , select Use the following IP address . The factory default router LAN IP addres s is 192.168.1.100. Therefore, we use an IP address located in 1 92.168.1.x block to get connect to the router . Here we use 192.168. 1.1 1 as an example. Click OK to finish the setting. 3.3 Access Rou ...
-
Digitus DN-11009 - page 10
If you login successfully , the rout er main web page will appear and you can start to configur e the router from web p ages. 3.4 Enable UPnP on Windows The UPnP (Universal Plug and Play) enables communication between any two devices under the command of any control device on the local network. PCs that have enabled UPnP function are informed when ...
-
Digitus DN-11009 - page 11
Go to desktop and click S tart Æ Control Panel . At Control Panel window , double click Add or Remove Programs . 11 ...
-
Digitus DN-11009 - page 12
Click Add/Remove Windows Components . Select Network Services and then click Details . 12 ...
-
Digitus DN-11009 - page 13
T ick Universal Plug and Play and then click OK . Back to this window , click Nex t . Windows will install the component automatically . z Depends on the version of y our OS, the original Windows CD might be required after this step. If so, please insert your original Windows CD. 13 ...
-
Digitus DN-11009 - page 14
Click Finish . Once the UPnP is enabled, the co mputer will be informed by this icon when a new device is connected to the local network. Y ou can click this icon to get the UPnP-supported device list. 14 ...
-
Digitus DN-11009 - page 15
Chapter 4 Settings 4.1 Quick Setup Quick Setup supports 4 W AN Connection T ypes - ADSL Dialup (PPPoE), ADSL S tatic IP , Automatic IP and Cable Modem (DHCP). If you do not know your W AN type, consult your ISP . S tart quick setup by selecting your W AN C onnection T ype from the drop-down list. 4.1.1 ADSL Dialup (PPPoE) If your ISP provides you t ...
-
Digitus DN-11009 - page 16
[Page 3] Click the services that you want to block and input the time period that you want the select ed services to be blocked. If you don’t want to block any services, leave all options empty . 4.1.2 S t atic IP If your ISP provides you the static IP , please follow the following steps to setup your W A N connection. [Page 1] Select ADSL S tati ...
-
Digitus DN-11009 - page 17
[Page 2] Input the IP Address, Subnet Mask, Default Gateway , and DNS Server provided by your ISP . [Page 3] Click the services that you want to block and input the time period that you want the select ed services to be blocked. If you don’t want to block any services, leave all options empty . 4.1.3 Automatic IP If your ISP provides you the aut ...
-
Digitus DN-11009 - page 18
[Page 1] Select Automatic IP from the drop-down list. [Page 2] Click the services that you want to block and input the time period that you want the select ed services to be blocked. If you don’t want to block any services, leave all options empty . 4.1.4 Cable Modem (DHCP) If your ISP provides you the Cabl e Modem (DHCP), please follow the follo ...
-
Digitus DN-11009 - page 19
[Page 2] Click the services that you want to block and input the time period that you want the select ed services to be blocked. If you don’t want to block any services, leave all options empty . 4.2 IP Configuration IP Configuration allows you to configure some basic functions including IP Setup, DHCP Server , Routing T able and Miscellaneous. 4 ...
-
Digitus DN-11009 - page 20
W AN Connection T ype: Select ADSL Dialup (PPPo E) from the drop-down list. W AN DNS Setting: Select Ye s to get DNS Server automaticall y . PPPoE Account: Input the user name and passw ord provided by your ISP . The MTU value can be changed if required. W AN MAC Address Setting: This has a default value giv en by the manufacturer and you are recom ...
-
Digitus DN-11009 - page 21
W AN Connection T ype: Select ADSL Dialup (PPPo E) from the drop-down list. W AN IP Setting: Input the IP Address, Subnet Ma sk and Default Gateway provided to you by your ISP . W AN DNS Setting: Select No to set the DNS manually and input the DNS Server IP . If you don’t know , please check with your ISP . The MTU value can be changed if require ...
-
Digitus DN-11009 - page 22
W AN Connection T ype: Select Automatic IP from the drop-down list. W AN DNS Setting: Select Ye s to get DNS Server automaticall y . W AN MAC Address Setting: This has a default value giv en by the manufacturer and you are recommended not to change this value. LAN IP Setting: There is a default LAN IP given by the manufacturer . Y ou can change thi ...
-
Digitus DN-11009 - page 23
W AN Connection T ype: Select Automatic IP from the drop-down list. W AN DNS Setting: Select Ye s to get DNS Server automaticall y . W AN MAC Address Setting: This has a default value giv en by the manufacturer and you are recommended not to change this value. LAN IP Setting: There is a default LAN IP given by the manufacturer . Y ou can change thi ...
-
Digitus DN-11009 - page 24
DHCP Server supports up to 253 IP addresses for you local network. Follow the instructions to configure DHCP Server . Enable DHCP Server: Select Ye s to enabl e or No to disable DHCP Server . Domain Name: Domain Name is the name whic h you had registered from NIC (Network Information Center). Ignore this part if managers don’t apply for a domain ...
-
Digitus DN-11009 - page 25
Routing T able p age allows you to set routing rules to this router . This includes stati c routing and dynamic routing. S tatic Route: Input the IP address of a destinat ion network or a host of the routing rule . It could be a host address like 192.168.123.100 or a network address, such as 192.168.0.0 . Click Add to add the rule to the routing ta ...
-
Digitus DN-11009 - page 26
Miscellaneous includes web server p ort setting, access control from W AN and DDNS setting. Y ou can enable or disable some servic es when clients access from W AN. Enable the DDNS Client: Select Ye s to enabl e or No to disable the DDNS client. DDNS Server: Select a DDNS server from the drop-down list or click Free T rial to link up a free trial a ...
-
Digitus DN-11009 - page 27
NA T Setup contains three function al items including Port T r igger , V irtual Server and Virtual D MZ. 4.3.1 Port T rigger Application-triggered port forwardi ng opens a port only when a program needs to use it. Y ou c an set a trigger port to open an incoming port. When trigger ports ar e used, the system opens the specified incoming ports. T o ...
-
Digitus DN-11009 - page 28
and input the port number by yourself. T rigger Ports: Input the port number that will trig ger the action. If this port was active by a program, the sy stem will open the corresponding incoming port. Incoming Ports: Input the port number that will be op en if the trigger port is active. Protocol: Select from the list whether this rule should be ap ...
-
Digitus DN-11009 - page 29
Enable V irtual Server: Select Ye s to enabl e or No to disable virtual server . W ell-Know Applications: The drop-down list has listed some well-know applications, you can get the port number of an applic ation by selecting from the drop-down list. Or you can also select User Defined from the list and input the local port number and server port nu ...
-
Digitus DN-11009 - page 30
the rule table. If you want to delet e a rule from the t able, select the rule and click Del . Then the high-lighted rul e will be removed from the list. Apply/Cancel: Click Apply to save the settings or click Cancel to aboard. 4.3.3 V irtual DMZ Y ou can redirect every connection from the Internet to a computer on your network by setting up a virt ...
-
Digitus DN-11009 - page 31
4.4.1 IP Filter IP Filter blocks connections according to their IP addresses and ports. Y ou can also set start time and end time if you only want to apply the filter rules during a specific period in a day . Enable Firewall: Select Ye s to enabl e or No to disable firewall. Enable Firewall Log: Select Ye s to enabl e or No to disable firewall log. ...
-
Digitus DN-11009 - page 32
apply to T CP or UDP or both. S tart T ime/End Time: Set a period of time to drop or accept the connection. T ype: Select from the drop-down list for dropping or accepting the connection. Add/Del: After fill up all your requirement of a rule, click Add to add the rule to the rule table. If you want to delet e a rule from the t able, select the rule ...
-
Digitus DN-11009 - page 33
Enable MAC Filter: Select Ye s to enabl e or No to disable MAC filter . MAC Address specified will be: Select DROP or ACCEPT from the list to mean all the connections to the MAC addresses on the lis t should be dropped or accepted. MAC Address: Input the MAC address that you want to apply to this rule. S tart T ime/End Time: Set a period of time to ...
-
Digitus DN-11009 - page 34
Enable URL Filter: Select Ye s to enabl e or No to disable URL filter . URL Keyword: Input a full URL or a keyword of an URL. For example, input “www .abc.com.tw” will only block the URL perfectly matches this URL while input “abc” will block al l the connections that contain “abc” in it s URL. S tart T ime/End Time: Set a period of tim ...
-
Digitus DN-11009 - page 35
The FTP server function allows you to share files on the network. This product supports a file format of F A T12/16/32. Please follow the steps below to configure FTP server . Enable FTP Server: Select Ye s to enabl e or No to disable FTP Server . Allow Anonymous User to Logi n: Select Ye s to al low users use anonymous to login or select No to for ...
-
Digitus DN-11009 - page 36
Select Ye s to enabl e or No to disable user log in to FTP as super user . Maximum Users Allowed to Login: Input the maximum amount that the system can allow users to login at the same time. FTP Port: The default FTP Port is 21, you can change it if necessary . Add/Del: T o add a user account, input user name, password, max login and file access ri ...
-
Digitus DN-11009 - page 37
4.5.2 Print Server The Print server function allows you to share printers on the network. Digitus DN-1 1009 support LPR printing protocol. Please follow the steps bel ow to configure print server . 37 ...
-
Digitus DN-11009 - page 38
Enable Print Server: Select Ye s to enabl e or No to disable print Server . Printer1 Name: This is the printer name of the fi rst printer . There will be a default printer name. Y ou can change it if you want. Remember this name will be the one you should use w hen adding printer on Windows. Printer1 Model: The model of the first printer . Printer2 ...
-
Digitus DN-11009 - page 39
Click Add a printer . Click Next . 39 ...
-
Digitus DN-11009 - page 40
Select Local printer attached to this computer then cl ick next . Select Create a new port and set type of port to S tandard TCP/IP Port . Click next . 40 ...
-
Digitus DN-11009 - page 41
A wizard of adding a new standard TCP/IP port will appear . Click Next . Give a name to this new port. Then click Next . 41 ...
-
Digitus DN-11009 - page 42
Select device type to Custom . Then click Settings . Set protocol to LPR and set queue name as the printer name you set on router web site. Here we use USSB1_LQ for example. Click OK . 42 ...
-
Digitus DN-11009 - page 43
Once the device type is configures, the wizard will back to this page. Click Next . Click finish to complete the add printer port wizard. 43 ...
-
Digitus DN-11009 - page 44
Select printer driver . Here we us e HP LaserJet 1200 Series PCL for example. Click Next . Give this printer a name. This name is used for Window s display . There will be a default printer nam e, you can change if necessary . 44 ...
-
Digitus DN-11009 - page 45
Select whether you want to print a test page or not. Here we select Ye s as an example. Click finish to complete the add printer wizard. 45 ...
-
Digitus DN-11009 - page 46
If the test page is printed, click Ok . Otherwise, click T roubleshoot . There will be a new printer added to your printer list. 4.6 System Setup 4.6.1 User Setting Y ou can set the name and password for the administrator of the 46 ...
-
Digitus DN-11009 - page 47
router . Input the new user name and passwo rd that is to be used as the administrator of the router . Re type the password and click Apply to save the settings or Cancel to aboard. *Note that you should use th e new user name and p assword to login to the router web site once applied. 4.6.2 T ime Setup Y ou can set the router clock to your local t ...
-
Digitus DN-11009 - page 48
Current Router T ime: This field displays your current router time. Using NTP to Get Time: Select this if you want to get time from NTP server . NTP Server: Select a NTP server from the drop-down list. T ime Zone: Choose your local time z one from the drop-down list. Daylight Saving Time: Select an option to enable or disable daylight saving time. ...
-
Digitus DN-11009 - page 49
This page displays the current firm ware information of your router . Y ou can always keep your router updated to the la test version from this page as well. P lease follow the steps below to upgrade router firmware. Product ID: This field displays product ID of your router . Firmware V ersion: This field displays the firmware ve rsion that your ro ...
-
Digitus DN-11009 - page 50
Click Here to save your current setting s into a file for backing up. If you want to get your original settings back, click Browse to get your saved settings and click Upload to apply . The system will reboot automatically , all the settings will be restored to the original value after reboot. 4.6.5 Restore Default Y ou may restore the router to fa ...
-
Digitus DN-11009 - page 51
For computers connected on this router ’ s LAN port, the W ake on LAN function allows you to turn on a computer through its MAC address. The computer must suppor t W ake on LAN. Please check the BIOS setup in your computer . T o wake up a computer , please enter the MAC address of the computer , and then click Wa k e U p to turn on the computer o ...
-
Digitus DN-11009 - page 52
System Up T ime: This field shows the lasting time from the last time this system up to current. W AN Interface Connection T ype: This field shows the W AN connecti on type this system is using. IP Address: This field shows the IP address of the system W AN port. 52 ...
-
Digitus DN-11009 - page 53
Subnet Mask: This field shows the subnet mask of the system W AN port. Default Gateway: This field shows the gateway of the system W AN port. DNS Servers: This field shows the DNS server IP address of the system W AN port. MAC Address: This field shows the MAC a ddress of the system W AN port. Connection S tatus: This field shows the current W A N ...
-
Digitus DN-11009 - page 54
IP addresses to other network devices. This p age shows the IP address offered and to whi ch MA C address does this IP address offered. Refresh: Click Refresh to get the latest information of the DHCP leases 4.7.3 System Log The system records some of it s activi ties automatically . An alerting email could be send to inform users when the system l ...
-
Digitus DN-11009 - page 55
System Log: The log records the time, type of services and description of router activities. Send an alert when logs are full: Select an option to enable or disa ble alerting email. If enabled, the system will send an email to the designated em ail address when logs are full. Email Address: Input the email address that you w ant the alerting email ...
-
Digitus DN-11009 - page 56
Input the password of your mail server authentication. Save: Click Save to save the logs to your computer . Mail Now: Click Mail Now to send an alerting email immediately . Refresh: Click Refresh to get the latest log status. 4.8 Logout T o logout from router web page, click Logout at the very right of the main menu. A page will inform you that you ...
-
Digitus DN-11009 - page 57
Appendix Factory Default V alues IP Configuration W AN Connect T ype: Automatic IP W AN DNS: Automatic PPPoE’s MTU: 1492 LAN IP: 192.168.1.100 LAN Subnet Mask: 255.255.255.0 DHCP Server: Enabled DHCP Server S tarti ng IP Address: 192.168.1.1 DHCP Server Ending IP Address: 192.168.1.254 R I P : D i s a b l e d W eb Server Port: 80 Ping from W AN: ...
-
Digitus DN-11009 - page 58
NTP Server: time.nist.gov T i m e Z o n e : G M T 58 ...
Do you have a question concerning Digitus DN-11009?
Use the form below
If you did not solve your problem by using a manual Digitus DN-11009, ask a question using the form below. If a user had a similar problem with Digitus DN-11009 it is likely that he will want to share the way to solve it.