English dropdown-ico

Manual RuggedCom RX1510

45 pages 5.46 mb
Download

Go to site of 45

Summary
  • RuggedCom RX1510 - page 1

    RuggedBackbone™ RX1510 Hardware Installation Guide Revision 104 - October 14, 2011 www.RuggedCom.com ...

  • RuggedCom RX1510 - page 2

    RuggedBackbone™ RX1510 RuggedBackbone™ RX1510: Hardware Installation Guide Copyright © 2011 RuggedCom Inc. All Rights Reserved Dissemination or reproduction of this document, or evaluation and communication of its contents, is not authorized except where expressly permitted. Violations are liable for damages. All rights are reserved, particula ...

  • RuggedCom RX1510 - page 3

    RuggedBackbone™ RX1510 RuggedCom® RuggedBackbone™ 3 RX1510 Installation Guide Rev 104 Table of Contents FCC Statement And Cautions ................................................................................................... 8 1. Product Overview ............................................................................................ ...

  • RuggedCom RX1510 - page 4

    RuggedBackbone™ RX1510 RuggedCom® RuggedBackbone™ 4 RX1510 Installation Guide Rev 104 3.14.1. APE Overview .............................................................................................. 34 3.14.2. Supported Operating Systems ..................................................................... 34 3.14.3. Secondary Network Inter ...

  • RuggedCom RX1510 - page 5

    RuggedBackbone™ RX1510 RuggedCom® RuggedBackbone™ 5 RX1510 Installation Guide Rev 104 List of Figures 2.1. RX1510 Chassis Slot Assignment .................................................................................... 11 2.2. Front View - RX1510 .............................................................................................. ...

  • RuggedCom RX1510 - page 6

    RuggedBackbone™ RX1510 RuggedCom® RuggedBackbone™ 6 RX1510 Installation Guide Rev 104 3.19. RJ45 Ethernet Pin Configuration .................................................................................... 25 3.20. RJ45 Serial Pin Configuration ......................................................................................... 27 3.21 ...

  • RuggedCom RX1510 - page 7

    RuggedBackbone™ RX1510 RuggedCom® RuggedBackbone™ 7 RX1510 Installation Guide Rev 104 List of Tables 2.1. Module Status LED Indications ......................................................................................... 12 3.1. RJ45 Serial Console Pinout .................................................................................... ...

  • RuggedCom RX1510 - page 8

    FCC Statement And Cautions RuggedCom® RuggedBackbone™ 8 RX1510 Installation Guide Rev 104 FCC Statement And Cautions Federal Communications Commission Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are design ...

  • RuggedCom RX1510 - page 9

    1. Product Overview RuggedCom® RuggedBackbone™ 9 RX1510 Installation Guide Rev 104 1. Product Overview 1.1. Functional Overview The RuggedBackbone™ RX1510 is a cost-efficient, rugged layer 3 switch and router. The RX1510’s modular and field replaceable platform allows you to select WAN, serial, and Ethernet options, making it ideally suited ...

  • RuggedCom RX1510 - page 10

    1. Product Overview RuggedCom® RuggedBackbone™ 10 RX1510 Installation Guide Rev 104 WAN Port Options • Up to 4 T1/E1 ports via RJ45 connectors (channelized/unchannelized) • Up to 2 E1 ports via BNC connectors (channelized/unchannelized) • Cellular/DDS Serial Ports • Fully compliant EIA/TIA RS485, RS422, RS232 serial ports (software selec ...

  • RuggedCom RX1510 - page 11

    2. RuggedBackbone™ Modules RuggedCom® RuggedBackbone™ 11 RX1510 Installation Guide Rev 104 2. RuggedBackbone™ Modules The RX1510 chassis provides six module slots . Each slot accommodates a particular type of RuggedCom module. Figure 2.1, “RX1510 Chassis Slot Assignment” shows the module slots on the RX1510. Figure 2.1. RX1510 Chassis Sl ...

  • RuggedCom RX1510 - page 12

    2. RuggedBackbone™ Modules RuggedCom® RuggedBackbone™ 12 RX1510 Installation Guide Rev 104 2.1. Front Panel The RX1510 Front Panel is equipped with an RS232 serial console port for initial management functions, and a locally connected 10/100Base-T Ethernet port for system management out of band from the switch fabric. Figure 2.2. Front View - ...

  • RuggedCom RX1510 - page 13

    2. RuggedBackbone™ Modules RuggedCom® RuggedBackbone™ 13 RX1510 Installation Guide Rev 104 2.2. Line Modules (LM) The RuggedBackbone™ RX1510 supports four line modules in slots LM1 through LM4 . Several types of line modules may be ordered, depending on the type, speed, and number of Ethernet ports required. The following illustrations show ...

  • RuggedCom RX1510 - page 14

    2. RuggedBackbone™ Modules RuggedCom® RuggedBackbone™ 14 RX1510 Installation Guide Rev 104 2.2.3. SFP Modular Figure 2.12. FG5*: 2 × 1000LX/1000SX SFP Figure 2.13. FX5*: 4 × 100FX/100LX/100SX SFP Figure 2.14. 6FX50: 6 × 100FX SFP 2.2.4. WAN Figure 2.15. TC1: 1 × T1/E1 RJ45 Figure 2.16. E01: 1 × E1 BNC Figure 2.17. TC2: 2 × T1/E1 RJ45 Fig ...

  • RuggedCom RX1510 - page 15

    2. RuggedBackbone™ Modules RuggedCom® RuggedBackbone™ 15 RX1510 Installation Guide Rev 104 2.2.7. DDS - Digital Data Services Figure 2.23. D02: 1 × DDS RJ45 2.2.8. APE - Appplication Processing Engine Figure 2.24. APE 1402 ...

  • RuggedCom RX1510 - page 16

    2. RuggedBackbone™ Modules RuggedCom® RuggedBackbone™ 16 RX1510 Installation Guide Rev 104 2.3. Power Supply The RX1510 may be equipped with one or two power modules. The use of two power modules is recommended to provide redundancy and load balancing. A single power module is capable of delivering a maximum of 42W, and accepts either AC or DC ...

  • RuggedCom RX1510 - page 17

    3. Installation RuggedCom® RuggedBackbone™ 17 RX1510 Installation Guide Rev 104 3. Installation 3.1. Mounting The RuggedBackbone™ RX1510 features optional mounting brackets for panel and DIN rail mounting. The optional brackets attach to both sides of the appliance at the rear of the chassis. For panel mounting, the mounting bracket provides f ...

  • RuggedCom RX1510 - page 18

    3. Installation RuggedCom® RuggedBackbone™ 18 RX1510 Installation Guide Rev 104 Figure 3.3. DIN Rail Mounting: Side View 3.1.1. RX1510Dimensions Figure 3.4. RX1510 Dimensions – Front View ...

  • RuggedCom RX1510 - page 19

    3. Installation RuggedCom® RuggedBackbone™ 19 RX1510 Installation Guide Rev 104 Figure 3.5. RX1510Dimensions – Top View Figure 3.6. RX1510 Dimensions – Side View ...

  • RuggedCom RX1510 - page 20

    3. Installation RuggedCom® RuggedBackbone™ 20 RX1510 Installation Guide Rev 104 3.2. Power Supply Wiring and Grounding The RX1510 supports dual redundant power supplies, power module 1 (PM1) and power module 2 (PM2). Power connections are located on the PM1 and PM2 module face plates. An optional chassis ground connection is located on the front ...

  • RuggedCom RX1510 - page 21

    3. Installation RuggedCom® RuggedBackbone™ 21 RX1510 Installation Guide Rev 104 3.2.3. Chassis Ground Connection The RX1510 chassis ground connection, shown in Figure 3.11, “Chassis Ground Connection” , uses a #10-32 screw. It is recommended to terminate the ground connection in a #10 ring lug. Torque on the chassis ground connection should ...

  • RuggedCom RX1510 - page 22

    3. Installation RuggedCom® RuggedBackbone™ 22 RX1510 Installation Guide Rev 104 3.2.5. DC Power Supply Wiring Examples + + Figure 3.13. Wiring for Two DC Power Supplies (24P or 48P modules shown) • For 125/230VAC rated equipment, a appropriately rated AC circuit breaker must be installed. • It is recommended to provide a separate circuit bre ...

  • RuggedCom RX1510 - page 23

    3. Installation RuggedCom® RuggedBackbone™ 23 RX1510 Installation Guide Rev 104 • The placement of the AC and DC power supplies is not slot-dependent. Either PM slot can be used for AC or DC power. • For 110/230VAC rated equipment, an appropriately rated AC circuit breaker must be installed. • For 125/250VDC rated equipment, a appropriatel ...

  • RuggedCom RX1510 - page 24

    3. Installation RuggedCom® RuggedBackbone™ 24 RX1510 Installation Guide Rev 104 3.4. Serial Console Port The serial console port on the front panel provides access to the boot-time control and configuration menu interface, and a console interface to the ROX™ operating system. The serial ports implement RS232 DCE on a RJ45 connector. Serial set ...

  • RuggedCom RX1510 - page 25

    3. Installation RuggedCom® RuggedBackbone™ 25 RX1510 Installation Guide Rev 104 3.6. WAN Ports: BNC The RX1510 supports optional E1 WAN ports with BNC connectors. The Tx and Rx connections are labelled on the line module. See the illustration below for the connection configuration. R x T x C h ass i s R T I P C h assi s TT I P Figure 3.18. RJ45 ...

  • RuggedCom RX1510 - page 26

    3. Installation RuggedCom® RuggedBackbone™ 26 RX1510 Installation Guide Rev 104 Cabling Category 1000Base- TX Compliant Required Action < 5 No New wiring infrastructure required. 5 Yes Verify TIA/EIA-568-A compliance. 5e Yes No action required. New installations should be designed with Category 5e or higher. 6 Yes No action required. > 6 Y ...

  • RuggedCom RX1510 - page 27

    3. Installation RuggedCom® RuggedBackbone™ 27 RX1510 Installation Guide Rev 104 3.8. Serial Ports: RJ45 The RX1510 supports serial port line modules with RJ45 connections. On power-up, all serial ports default to RS485 mode. Each port can be individually set to RS232, RS485, or RS422 mode via software. Figure 3.20. RJ45 Serial Pin Configuration ...

  • RuggedCom RX1510 - page 28

    3. Installation RuggedCom® RuggedBackbone™ 28 RX1510 Installation Guide Rev 104 3.10. DDS Rx and Tx LED Indications The DDS module features Rx and Tx LED indicators that display transmit and receive status. Figure 3.22. DDS Module Rx and Tx LED Indicators The following tables describe the DDS module Rx and Tx LED status indications: Rx LED Color ...

  • RuggedCom RX1510 - page 29

    3. Installation RuggedCom® RuggedBackbone™ 29 RX1510 Installation Guide Rev 104 3.11.1. Module Insertion – SFP Special attention must be paid to the orientation of SFP modules upon installation in the RX1510 chassis. The figure below shows the proper orientation of SFP modules installed in both upper and lower line modules. SFP modules on the ...

  • RuggedCom RX1510 - page 30

    3. Installation RuggedCom® RuggedBackbone™ 30 RX1510 Installation Guide Rev 104 Figure 3.25. SFP module removal 3.12. Fiber Ethernet Ports Depending on the order code of the product, the RuggedBackbone™ RX1510 can be equipped with several different types of fiber optic ports. The Transmit (TX) and Receive (RX) connections of each port must be ...

  • RuggedCom RX1510 - page 31

    3. Installation RuggedCom® RuggedBackbone™ 31 RX1510 Installation Guide Rev 104 3.13. Cellular Modems The RX1510 can be equipped with cellular modem modules for operation on GSM, EDGE, HSPA +, or CDMA networks. The cellular modems feature 50 Ω SMA antenna connectors on the front plate of each module. The following cellular modem modules are av ...

  • RuggedCom RX1510 - page 32

    3. Installation RuggedCom® RuggedBackbone™ 32 RX1510 Installation Guide Rev 104 3.13.1. GSM, EDGE, HSPA+ Cellular Modem Card The HSPA option is available for use on various GSM based networks. This option supports GSM, GPRS, EDGE, UMTS and WCDMA/HSDPA/HSUPA. The Main antenna and Receive Diversity antenna connections are made to the 50 Ω SMA co ...

  • RuggedCom RX1510 - page 33

    3. Installation RuggedCom® RuggedBackbone™ 33 RX1510 Installation Guide Rev 104 3. Note the location of the SIM card cages. For modules W11 and W32, install the SIM card in SIM 1 . For module W22, install a SIM card in both SIM 1 and SIM 2 . 4. Top open a SIM card cage, slide the silver catch down towards the antenna connector end of the module ...

  • RuggedCom RX1510 - page 34

    3. Installation RuggedCom® RuggedBackbone™ 34 RX1510 Installation Guide Rev 104 3.14. APE: Application Processing Engine 3.14.1. APE Overview The APE (Application Processing Engine) is an x86-based computer designed to occupy a single line module slot on the RX1510. The APE can host any x86-based operating system capable of running on a computer ...

  • RuggedCom RX1510 - page 35

    3. Installation RuggedCom® RuggedBackbone™ 35 RX1510 Installation Guide Rev 104 3.14.3. Secondary Network Interface In addition to the gigabit Ethernet interface on the faceplate, the APE features a gigabit Ethernet interface connecting to a port on the RX1510 chassis. The interface can be used by the operating system running on the APE as a nor ...

  • RuggedCom RX1510 - page 36

    3. Installation RuggedCom® RuggedBackbone™ 36 RX1510 Installation Guide Rev 104 3.14.4. Installing an Operating System We recommend that the operating system be installed and configured by users with experience in installing and administering the chosen operating system. To install an operating system on the APE, you need the following items: ? ...

  • RuggedCom RX1510 - page 37

    3. Installation RuggedCom® RuggedBackbone™ 37 RX1510 Installation Guide Rev 104 3.14.5. The APE BIOS The APE module features a BIOS with functionality similar to that of a typical PC. You can configure the following BIOS settings: • System Time • Processor Options • Boot Options • Security Options For most purposes, these options are use ...

  • RuggedCom RX1510 - page 38

    3. Installation RuggedCom® RuggedBackbone™ 38 RX1510 Installation Guide Rev 104 3.14.8. FAQs Q: How do I use a CD or DVD to install an operating system on the APE module? A: Connect an external CD/DVD drive to one of the APE USB ports. If the external drive is powered through the USB port, ensure that it does not exceed the USB port power limita ...

  • RuggedCom RX1510 - page 39

    4. Technical Specifications RuggedCom® RuggedBackbone™ 39 RX1510 Installation Guide Rev 104 4. Technical Specifications 4.1. Power Supply Specifications Input Range Power Supply Type Min Max Internal Fuse Rating Max. Power Consumption a Max Power Output Connections 88 VDC 300 VDC HI 85 VAC 264 VAC 2A(T) b 52W Max 42W Screw terminal block 88 VDC ...

  • RuggedCom RX1510 - page 40

    4. Technical Specifications RuggedCom® RuggedBackbone™ 40 RX1510 Installation Guide Rev 104 4.4. Fiber Ethernet Port Specifications The following sections detail fiber optic specifications for ports that can be ordered with the modules on a RuggedBackbone™ RX1510. The user determines the type of optics at time of ordering, and can determine th ...

  • RuggedCom RX1510 - page 41

    4. Technical Specifications RuggedCom® RuggedBackbone™ 41 RX1510 Installation Guide Rev 104 4.4.2. Gigabit Ethernet (1Gbps) Optical Specifications Fixed Gigabit Transceivers Order Code Mode Connector Type Cable Type ( µ m) Tx λ (typ.) (nm) Tx min (dBm) Tx max (dBm) Rx Sensitivity (dBm) Rx Saturation (dBm) Distance (typ.) (km) Power Budget (dB) ...

  • RuggedCom RX1510 - page 42

    5. EMI And Environmental Type Tests RuggedCom® RuggedBackbone™ 42 RX1510 Installation Guide Rev 104 5. EMI And Environmental Type Tests Test Description Test Levels Severity Levels Enclosure Contact +/- 8 kV 4 IEC 61000-4-2 ESD Enclosure Air +/- 15 kV 4 IEC 61000-4-3 Radiated RFI Enclosure Ports 20 V/m Note a Signal ports +/- 4kV @ 2.5kHz Note a ...

  • RuggedCom RX1510 - page 43

    5. EMI And Environmental Type Tests RuggedCom® RuggedBackbone™ 43 RX1510 Installation Guide Rev 104 Test Description Test Levels Enclosure Contact +/-2kV, +/-4kV, +/- 8kV IEEE C37.90.3 ESD Enclosure Air +/-4kV, +/-8kV, +/-15kV IEEE C37.90.2 Radiated RFI Enclosure ports 35 V/m Signal ports +/- 4kV @ 2.5kHz D.C. Power ports +/- 4kV A.C. Power port ...

  • RuggedCom RX1510 - page 44

    6. Agency Approvals RuggedCom® RuggedBackbone™ 44 RX1510 Installation Guide Rev 104 6. Agency Approvals Agency Standards Comments TUV UL 60950-1:2007, CAN/CSA-C22.2 No. 60950-1-07 CE EN 60950, EN 61000-6-2 CE Compliance is claimed via Declaration of Self Conformity Route FCC FCC Part 15, Class A CISPR EN55022, Class A FDA/CDRH 21 CFR Chapter 1, ...

  • RuggedCom RX1510 - page 45

    7. Warranty RuggedCom® RuggedBackbone™ 45 RX1510 Installation Guide Rev 104 7. Warranty RuggedCom warrants this product for a period of five (5) years from the date of purchase. This product contains no user-serviceable parts. Attempted service by unauthorized personnel shall render all warranties null and void. For warranty details, visit www.R ...

Manufacturer RuggedCom Category Network Router

Documents that we receive from a manufacturer of a RuggedCom RX1510 can be divided into several groups. They are, among others:
- RuggedCom technical drawings
- RX1510 manuals
- RuggedCom product data sheets
- information booklets
- or energy labels RuggedCom RX1510
All of them are important, but the most important information from the point of view of use of the device are in the user manual RuggedCom RX1510.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals RuggedCom RX1510, service manual, brief instructions and user manuals RuggedCom RX1510. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product RuggedCom RX1510.

Similar manuals

A complete manual for the device RuggedCom RX1510, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use RuggedCom RX1510 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of RuggedCom RX1510.

A complete RuggedCom manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual RuggedCom RX1510 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the RuggedCom RX1510, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the RuggedCom RX1510, that we can find in the current document
3. Tips how to use the basic functions of the device RuggedCom RX1510 - which should help us in our first steps of using RuggedCom RX1510
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with RuggedCom RX1510
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of RuggedCom RX1510 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning RuggedCom RX1510?

Use the form below

If you did not solve your problem by using a manual RuggedCom RX1510, ask a question using the form below. If a user had a similar problem with RuggedCom RX1510 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)