English dropdown-ico

Manual Heat & Glo LifeStyle XLR-PLUS-N-AU

77 pages 11.62 mb
Download

Go to site of 77

Summary
  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 1

    1 Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 Model: XLR-PLUS-N-AU XLR-PLUS-PB-AU • DO NOT store or use gasoli ne or other am- mab le vap ors an d liqu ids in th e v ici nity o f t his or any other appliance. • DO NOT spray aerosols in the vicinity of this appliance while it is in operation. • Whatt ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 2

    Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 2 MODELS:XLR-PLUS-N-AU, XLR-PLUS-PB-AU ARE SAI GLOBAL APPROVED FOR  NA TUR AL  GAS, PROP ANE OR BUT ANE AS A BALANCEDFLUEHEA TER. Refer to the appliance data plates for gas consumptions and pressures. Inst alla tion of this ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 3

    3 Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 Model Name: ___________________________________________ Date purchased/installed: __________________ Serial Number: __________________________________________ Location on replace: _____________________ Dealership purchased from: _______________________________ Deale ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 4

    Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 4 Safety AlertKey: • DANGER! Indicates a hazardous situation which, if not avoided will result in death or serious injury . • W ARNING! Indicates a hazardous situation which, if not avoided could result in death or serious injury . • CAUTION! Indi ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 5

    5 Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12  = Contains updated information. F . B l o w e r ....................................... 4 5 G. Control Module Operation . . . . . . . . . . . . . . . . . . . . . . . . 46 13Finishing  A. Framing and Finishing Instructions . . . . . . . . . . . . . . . . . ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 6

    Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 6 AUSTRALIANW ARRANTY INFORMA TION W arranty information in the attached manual is for international markets, not Australia. For Australian warranty information, please see below . Hearth&HomeT echnologiesInc(HHT) 7571215thStreetWest, ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 7

    7 Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 W arranty Period Heat & Glo Manufactured Appliances and V enting Components Covered Parts Labor Gas Wood Pellet EP A Wood Coal Electric V enting 5 years 1 years X X Castings & baf es 7 years 3 years X X X Manifold tubs HEA T & GLO chimney and termination ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 8

    Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 8 • Non Heat & Glo venting components, hearth components or other accessories used in conjunction with the appliance. • Any part of a pre-existing  replace system in which an insert or a decorative gas appliance is installed. • Removal, installation, reinsta ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 9

    9 Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 A. ApplianceCertication C. High AltitudeInstallations NOTICE: If the heatin g value of the gas has been reduced, these rules do not apply . Check with your local gas utility or authorities having jurisdiction. When installing above 2000 ft. (610 m) el ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 10

    Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 10 Figure2.1GeneralOperatingParts B. Y ourFireplace W ARNING! DO NOT operate replace before read - ing and understanding operating instructions. Failure to operate replace according to operating instructions could cause re or injury . If you ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 11

    1 1 Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 C. ClearSpace W ARNING! DO NOT place combustible objects in front of the replace or block louvers. High temperatures may start a re. See Figure 2.2. Avoid placing candles and other heat-sensitive objects on mantel or hearth. Heat may damage these objects. ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 12

    Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 12 I. LightingInstructions(IPI) The IPI system may be operated with four C-cell batteries. When using batteries, unplug the transformer . T o prolong battery life, remove them when using the transformer . 1. This appliance is equipped with an ignition device whi ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 13

    13 Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 J. ControlModuleOperation 1. The control module has an ON/OFF/REMOTE selector switch that must be set. OFF Position: Appliance will ignore all power inputs and will not respond to any commands from a wall switch or optional remote. The unit should be in the O ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 14

    Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 14 K. AfterFireplaceisLit InitialBreak-inProcedure • The replace should be run three to four hours continuously on high. • T urn the replace off and allow it to completely cool. • Remove xed glass assembly . See Section 14.E. • Cl ean ? ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 15

    15 Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 GlassCleaning Frequency: Seasonally By: Homeowner T ools Needed : Protective gloves, glass cleaner , drop cloth and a stable work surface. CAUTION! Handle xed glass assembly with care. Glass is breakable. • Avoid striking, scratching or slamming glass ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 16

    Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 16 B. MaintenanceT asks-QualiedService T echnician The following tasks must be performed by a qualied ser- vice technician. GasketSealandGlass AssemblyInspection Frequency: Annually By: Qualied Service T echnician T oolsnee ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 17

    17 Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 A. T ypical ApplianceSystem NOTICE: Illustrations and photos reect typical installations and are for design purposes only . Illustrations/diagrams are not drawn to scale. Actual product may vary from pictures in manual Figure4.1 sta 4 Get tingS ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 18

    Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 18 B. DesignandInstallationConsiderations Heat & Glo direct vent gas appliances are designed to operate with all combustion air siphoned from outside of the building and all exhaust gases expelled to the outside. No additional outside air source is requir ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 19

    19 Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 5 F ramingandC learances  A. Selecting ApplianceLocation Whe n sel ect ing a locat ion for the appl ia nce it is impo rt ant to con sid er th e r eq uir ed cle aranc es to wa lls (s ee Figur e 5 .1) . W ARNING! Risk of Fire or Burns! Provide ad ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 20

    Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 20 B. Constructingthe ApplianceChase A chase is a vertical box-like structure built to enclose the gas appliance and/or its vent system. In cooler climates the vent should enclosed inside the chase. NOTICE: T reatment of ceiling restops and wall shield  ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 21

    21 Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 D. MantelandW allProjections W ARN IN G! Ri sk of Fi re! C om ply wi th al l mi ni mum cl ear - an ces to c omb us ti ble s as spe ci ed . F ram ing or  nis hi ng ma ter ial c lo ser t ha n th e mi nim ums l is ted m us t b e co nst ru ct - ed ent ir ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 22

    Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 22 A. V entT erminationMinimumClearances H (MI N.) - M INIMUM HEIG HT FROM R OOF TO L OWE ST DIS CHA R GE O PENING VERTICAL W ALL TERMINA TION CAP HORIZONT AL OVERHANG 305 mm X ROOF PITCH IS X/ 305 mm LOWEST DISCHARGE OPENING 510 mm MIN. 610 mm MIN. 6 T ermin ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 23

    23 Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 Figure6.3 MinimumClearancesforT ermination NOTES: 1. All distances are measured vertically or horizontally along the wall to a point in line with the nearest part of the terminal. 2. Prohibited area below electricity meter or fuse box extends to ground ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 24

    Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 24 A. ApprovedPipe This appliance is approved for use with Hearth & Home T echnologies SLP venting systems. Refer to Section 17.B for vent component information. DO NOT mix pipe, ttings or joining methods from differ- ent manufacturers. The pipe is tested to ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 25

    25 Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 Figure7.3 T opV ent-HorizontalT ermination V entingwith1elbow H 1 V 1 VMinimum H 1 Maximum 90 Elbow 457 mm 305 mm (1 ft.) 914 mm (3 ft.) 457 mm (1.5 ft.) 1067 mm (3.5 ft.) 610 mm (2 ft.) 1.52 m (5 ft.) 762 mm (2.5 ft.) 1.85 m (6 ft.) 914 ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 26

    Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 26 INST ALLED HORIZONT ALL Y H 1 H 2 V 1 Figure7.4 1. T opV ent-HorizontalT ermination - (continued) T opV ent-HorizontalT ermination V entingwith2elbows Note : Use SLP Series components only . VMinimum H 1 + H 2 Maximum 90 ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 27

    27 Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 Figure7.5V erticalV entMaximum Note : If installing a vertical vent/termination of f the top of the appliance, the optional exhaust restrictor may be needed. V 1 V 1 Max=13.4m(44ft.) T opV ent-V erticalT ermination NoElb ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 28

    Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 28 Figure7.8 H 1 V 1 V 2 T opV ent-V erticalT ermination V entingwith2elbows Note : Use SLP Series components only . V 1 Minimum HMaximum V 2 V 1 +V 2 Minimum 90° Elbow 2 ft. (610 mm) * * 6 in. (152 mm) 3 ft. (914 mm) * * 18 in. (4 ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 29

    29 Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 IN STALLED HO RI ZON T ALL Y H 1 H 2 V 1 V 2 Figure7.9 T opV ent-V erticalT ermination V entingwith3elbows Note : Use SLP Series components only . V 1 Minimum H 1 + H 2 Maximum V 2 V 1 +V 2 Minimum 90° Elbow 1 ft. (305 mm) * * 1 ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 30

    Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 30 T opV ent-V erticalT ermination V entingwith4elbows Note : Use SLP Series components only . V 1 Min. H 1 Max. V 2 Min. H 2 Max. V 3 Min. 18 in. (457 mm) 5 ft. (1.2 m) 5 ft. (1.2 m) 5 ft. (1.2 m) 3 ft. (1.0 m) V 1 + V 2 + V 3 + H 1 + ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 31

    31 Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 Note: Heat shields MUST overlap by a minimum of 1-1/2 in. (38 mm). • SLP heat shield - designed to be used on a wall 4-3/8 in. to 7-5/8 in. (1 1 1 mm to 194 mm) thick. • If wall thickness is less than 4-3/8 in. (1 1 1 mm) the existing heat shields must be field tr ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 32

    Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 32 C. InstalltheCeilingFirestop A ceiling restop MUST be used between oors and attics. • SLPpipe only - Frame opening 9 i n. x 9 i n. (2 2 9 mm x 2 29 mm) whenever the vent penetrates a ceiling/floor (see Figure 8.3). • Frame the area with the ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 33

    33 Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 D. Install AtticInsulationShield W ARNING! Fire Risk. DO NOT allow loose materials or insulation to touch vent. Hearth & Home T echnologies Inc. requires the use of an attic shield. Attic shields must meet specied clearance and be se- cured in place ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 34

    Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 34 ELBOW HEA T SHIELD SHOWN IN SHIPPING POSITION CAUTION! Risk of Cuts, Abrasions or Flying Debris. Wear protective gloves and safety glasses during instal- lation. Sheet metal edges are sharp. A. T opV ent 9 AppliancePreparation  Figure9.1Elbow? ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 35

    35 Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 B. SecuringandLevelingthe Appliance W ARNING! Risk of Fire! Prevent contact with: • Sagging or loose insulation • Insulation backing or plastic • Framing and other combustible materials Block openings into the chase to prevent entry of blown- in i ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 36

    Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 36 1 0 Install ingV entPipe( SLPP ip e )  Figure10.2HighT emperatureSiliconeSealant A. AssembleV entSections T o attach the rst vent component to the starting collars of the appliance: • Lock the vent components into p ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 37

    37 Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 C. SecureTheV entSections • V er t i ca l r un s o f pi p e mu s t be su pp o rt ed ev er y 8 f t . (2 . 4 4 m ) . • Horizontal sections must be supported every 5 ft. (1.52 m). • V ent supports or plumbers strap (spaced 120º apart) may be used to su ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 38

    Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 38 D.  Di sa ss em bl e V en tS ec ti on s • Rota te either se ction (s ee F igure 10 .7) so the seams on both pipe s ectio ns are alig ned as show n in F igure 10.8. • Pull carefully to separate the pieces of pipe. Figure10.8 AlignandDisassem ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 39

    39 Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 F . InstallMetalRoofFlashing • See minimum vent heights for various pitched roofs (Figure 10.1 1) to determine the length of pipe to extend through the roof. • Slide the roof ashing over the pipe sections extending through the roof as shown in Figur ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 40

    Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 40 SCREWS CAULK STORM COLLAR (1of3) Figure10.15 TERMINA TIONCAP H. InstallV erticalT erminationCap • Attach the vertical termination cap by sliding the inner collar of the cap into the inner ue of the pipe section while placing the outer coll ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 41

    41 Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 K. InstallHorizontalT erminationCap W ARNING! Risk of Fire! The telescoping ue section of the termination cap MUST be used when connecting vent. • 1-1/2 in. (38 mm) minimum overlap of ue telescoping section is required. Failure to maintain overlap ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 42

    Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 42 1 1 GasInformation  A. GasPressureRequirements Pressure requirements for XLR-PLUS-AU replaces are shown in T able 1 1.1 below . T wo taps are provided on the front face of the gas control for a test gauge connection to measure the inlet and out ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 43

    43 Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 CHECK FOR GAS LEAKS Explosion Risk Fire Risk Asphyxiation Risk • Check all ttings and connections. • Do not use open ame. • After the gas line installation is complete, all connections must be tightened and checked for leaks with a commercially-available, ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 44

    Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 44 C. Optional AccessoriesRequirements • This appliance may be used with a wall switch, wall mou nte d therm ost at and/ or a remot e contr ol, and modu le reset switch. Wiring for optional Hearth & Home T echnologies approved accessories should be done no ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 45

    45 Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 D.JunctionCordInformation The junction cord is instal led at the factory . Refer to Figure 12.2 and 12.3. for more information. E. ElectricalServiceandRepair W ARNING! Risk of Shock! Label all wires prior to dis- connection when servicing contr ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 46

    Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 46 G. ControlModuleOperation 1. The control module has an ON/OFF/R EMOTE selector switch that must be set. See Figure 12.4. OFF Posit ion : Appl ia nce will igno re all power inpu ts and will not respond to any commands from a wall switch or remote. The unit sho ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 47

    47 Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 FCCRequirements W ARNING! Risk of Fire! Changes or modications to this unit not expressly approved by the party responsible for compliance could void the user ’ s authority to operate the equipment. Note: This equipment has been tested and found to comply w ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 48

    Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 48 5. Close the housing door . See Figure 12.8. 4. Plac e rem ote co nt rol in sid e hou sin g. See F igu re 12. 7. Figure12.7RemoteinHousing Figure12.8MountingRemoteControlHousing AUX300CEModuleInstallation • In ser t the 4 hol e ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 49

    49 Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 FIREPLACE ST A TUS THERMOST A T THERMOST A T DESIRED TEMP SETTING FLAME HEIGHT F AN SPEED ADJUST ABLE AUXILIARY ADJUST ABLE OUTPUT (ON/OFF) TIMER DISPLA Y/FUNCTION ROOM TEMP DISPLA Y FUNCTION LEVEL INDICA TOR LOW BA TTERY INDICA TOR TRANSMISSION INDICA TOR CHILD LOCK ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 50

    Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 50 AboutONMode • All functions can be accessed when the remote control is in the ON mode. • Only active functions will be displayed when the remote control is in the ON mode. For example: if the fan is the only function that’ s active, the fan icon and ame ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 51

    51 Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 AdjustingThermostat • Press the MENU button to activate the menu. • Using the UP and DOWN arrows highlight the THERMO icon and press SELECT . • Use the UP and DOWN arrows to turn the THERMO ON or OFF , then press SELECT (the SET TEMP will start blinking). Usi ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 52

    Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 52 Frequently AskedQuestions/T roubleshooting Symptom PossibleCause Corrective Action Remote control will not transmit Batteries V erify batteries are functional and installed correctly . Remote control is in Child Lock mode Disengage Child Lock mode. Buttons ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 53

    53 Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 1 3 F inishing  A. FramingandFinishingInstructions W ARN IN G! Ri sk o f Fi re ! Co mpl y wi th a ll mi nim um cle ar - an ces to com bus tib les as sp ec i ed. Fr ami ng cl os er tha n th e mi nim ums li ste d mu st be co ns tru ct ed en ti re ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 54

    Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 54 W ARNING! Risk of Fire! Maintainspeciedairspace clearancestocombustibles. Failure to comply with these instructions may cause a re or cause the appliance to overheat. LOWER COVER P ANEL TOP FLANGE FINISHING FLANGES SIDE COLUMNS = NO SCREWS ALLO ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 55

    55 Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 Note: The lower cover panel must be pushed all the way down. The outer nishing anges should line up. The replace opening must be between 15-3/4 in. (400 mm) and 16-1/8 in. (410 mm) for the decorative fronts to t correctly . See Figure 13.4. Finishand ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 56

    Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 56 B. MantelandW allProjections W ARN IN G! Ri sk o f Fi re ! Co mpl y wi th a ll mi nim um cle ar - an ces to com bus tib les as sp ec i ed. Fr ami ng cl os er tha n th e mi nim ums li ste d mu st be co ns tru ct ed en ti re ly of no nc om- bu sti ble m a ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 57

    57 Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 C. FacingMaterial • Facing and/or nishing materials must not interfere with air ow through louvers, operation of louvers or doors, or access for service. • Facing and/or nishing materials must never overhang into the glass opening. • Observe all c ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 58

    Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 58 Non-Combustible Finish Material 0 - 1 in. (25 mm) Thick Bottom Joint 3/4 in. (19 mm) 3 in. (76 mm) 3/4 in. (19 mm) Figure13.1 1NoncombustibleSurfaceFinishingMaterial  0-1in.(25mm)Thick-InsideFitMethod  (T onicDe ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 59

    59 Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 Figure13.14.DimensionsofT onicDecorativeFront. A B D C E F TONIC FRONT T able1.DimensionsofT onicDecorativeFront. A T op of decorative front to bottom of appliance. 26-3/8 in. (670 mm) B Bottom of decorative front to bottom of ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 60

    Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 60 A. RemoveFixedGlass Assembly See Section 14.E. B. RemovetheShippingMaterials Remove shipping materials from inside or underneath the rebox. The standard black rock media and manual bag assembly are also shipped underneath the rebox. C. ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 61

    61 Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 Figure14.3 AirShutter G. AirShutterSetting Air shutter settings may be adjusted by a qualied install- er at the time of installation. The air shutter is set at the factory for minimum vertical vent run. Adjust air shutter for longer vertical ru ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 62

    Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 62 A. IntelliFirePlus™IgnitionSystem Symptom PossibleCause Corrective Action 1. Pilot won’t light. The ignitor/module makes noise, but no spark. a. Incorrect wiring. V erify “S” wire (white) for sensor and “I” wire (orange) for ignitor are c ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 63

    63 Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 IntelliFirePlus™IgnitionSystem-(continued) Symptom PossibleCause Corrective Action 4. Pilot lights but contin- ues to spark, and main burner will not ignite. (If the pilot continues to spark after the pilot ame has been lit, ame rectica ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 64

    Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 64 Frequently AskedQuestions/T roubleshooting Symptom PossibleCause Corrective Action Remote control will not transmit Batteries V erify batteries are functional and installed correctly . Remote control is in Child Lock mode Disengage Child Lock mode. Buttons ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 65

    65 Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 1 6 ComponentA ccess  W ARNING! Risk of Fire, Electric Shock and Burns! T urn off power to module and valve by unplugging the 6V transformer from the junction cord, before removing xed glass assembly . A. D ecor ati veFro ntan dFixe dGl a ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 66

    Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 66 Figure16.5RemoveV alvePlateScrews 3. Set the valve bracket on the front lip of the rebox bot- tom. T urn “off” the ball valve. Disconnect gas valve from the gas ex ball valve assembly at the pressure tting. See Figure 16.6. Figure16.6 ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 67

    67 Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 G. GasV alveReplacement Once the valve assembly has been removed, the gas valve, pilot assembly , orice ex tube, and ex ball valve can be replaced. 1. Place the valve assembly on a clean, stable surface to service or replace any components. 2. Discon ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 68

    Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 68 17 ReferenceMaterials  A. ApplianceDimensionDiagram Di me ns ion s ar e ac tua l ap pl ia nc e dim en si on s. U se fo r re fe re nce o nl y. F or f ram in g di me nsi on s an d cl ea ran ce s re fe r to Se ct io n 5. A B G Q C L D E H O F P N Ø ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 69

    69 Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 B.MaintenanceT asks Inspect MaintenanceT asks Doors 1. Inspect for scratches, dents or other damage and repair as necessary . 2. V erify no obstructions to airow . 3. V erify maintenance of proper clearance to combustible household objects. Gasket Seal, ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 70

    Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 70 Cap Shield DRC-RADIUS 13-7/8 in. (352 mm) 9-1/2 in (241 mm) 14 in. (356 mm) COOL-ADD Cap Shield 11-5/8 in. (295 mm) 5-3/4 in. (146 mm) 7-1/8 in (181 mm) 12-1/8 (308 mm) DVP-BEK2 DVP-HPC Cap Brick Extension 13-7/8 in. (352 mm) 5 i n . ( 1 27 m m ) 11-7/8 in. (302 mm) F ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 71

    71 Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 8-1/2 in. (222 mm) 6-1/2 in. (165 mm) 6-5/8 in. (168 mm) 8-3/4 in. (152 mm) 6-1/2 in (165 mm) 6-5/8 in. (168 mm) 9-7/8 in (251 mm) 6-1/2 in. (165 mm) 9-1/4 in. (235 mm) SLP-45-45°Elbow SLP90-90°Elbow Effective Height/ Length SLP-PIPE SLP-HVS Horizonta ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 72

    Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 72 SLK-SNKD Snorkel T erminationCap SLP-TVHW V ertical T erminationCap SLP-CCS-BK CathedralCeiling SupportBox-Black SLP-DCF-BK CeilingFirestop Black SLP-WT -BK W allThimble-Black C. V entComponentsDiagrams (continued) SL-2DVP Adapter F ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 73

    73 Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 SLP-TRAP Horizontal T ermination Cap 15-1/8 in. (384 mm) Note: Heat shields MUST overlap by a minimum of 1-1/2 in. (38 mm). The heat shield is designed to be used on a wall 4 in. (102 mm) to 7-1/4 in. (184 mm) thick. If wall thickness is less than 4 in. (102 mm) the e ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 74

    Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 74 D. ServiceParts XLR-PLUS-N-AU,XLR-PLUS-PB-AU LandscapeHeaterRated Appliance BeginningManufacturingDate:May201 1 EndingManufacturingDate:______ IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 75

    75 Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 15.1 15.2 15.3 15.4 15.5 15.6 15.7 15.8 15.9 15.10 15.1 1 15.12 15.13 15.15 15.14 15.16 15.17 ServiceParts XLR-PLUS-N-AU,XLR-PLUS-PB-AU IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 76

    Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 76 XLR-PLUS-N-AU,XLR-PLUS-PB-AU D. ServicePartsList IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number . All parts listed in this manual may be ordered fro ...

  • Heat & Glo LifeStyle XLR-PLUS-N-AU - page 77

    77 Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev . M • 7/12 Heat & Glo, a brand of Hearth & Home T echnologies Inc. 7571 215th Street West, Lakeville, MN 55044 www .heatnglo.com E. ContactInformation Please contact your Heat & Glo dealer with any questions or concerns. For the location of your nearest Heat &a ...

Manufacturer Heat & Glo LifeStyle Category Indoor Fireplace

Documents that we receive from a manufacturer of a Heat & Glo LifeStyle XLR-PLUS-N-AU can be divided into several groups. They are, among others:
- Heat & Glo LifeStyle technical drawings
- XLR-PLUS-N-AU manuals
- Heat & Glo LifeStyle product data sheets
- information booklets
- or energy labels Heat & Glo LifeStyle XLR-PLUS-N-AU
All of them are important, but the most important information from the point of view of use of the device are in the user manual Heat & Glo LifeStyle XLR-PLUS-N-AU.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Heat & Glo LifeStyle XLR-PLUS-N-AU, service manual, brief instructions and user manuals Heat & Glo LifeStyle XLR-PLUS-N-AU. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Heat & Glo LifeStyle XLR-PLUS-N-AU.

Similar manuals

A complete manual for the device Heat & Glo LifeStyle XLR-PLUS-N-AU, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Heat & Glo LifeStyle XLR-PLUS-N-AU by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Heat & Glo LifeStyle XLR-PLUS-N-AU.

A complete Heat & Glo LifeStyle manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Heat & Glo LifeStyle XLR-PLUS-N-AU - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Heat & Glo LifeStyle XLR-PLUS-N-AU, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Heat & Glo LifeStyle XLR-PLUS-N-AU, that we can find in the current document
3. Tips how to use the basic functions of the device Heat & Glo LifeStyle XLR-PLUS-N-AU - which should help us in our first steps of using Heat & Glo LifeStyle XLR-PLUS-N-AU
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Heat & Glo LifeStyle XLR-PLUS-N-AU
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Heat & Glo LifeStyle XLR-PLUS-N-AU in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Heat & Glo LifeStyle XLR-PLUS-N-AU?

Use the form below

If you did not solve your problem by using a manual Heat & Glo LifeStyle XLR-PLUS-N-AU, ask a question using the form below. If a user had a similar problem with Heat & Glo LifeStyle XLR-PLUS-N-AU it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)