English dropdown-ico

Manual Denon AVRE400

159 pages 18.97 mb
Download

Go to site of 159

Summary
  • Denon AVRE400 - page 1

    AVR-E400 INTEGRATED NETWORK AV RECEIVER Owner’s Manual Basic instructions Advanced instructions Information DVD ...

  • Denon AVRE400 - page 2

    I n SAFETY PRECAUTIONS CA UTION RISK OF ELECTRIC SHOCK DO NO T OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence ...

  • Denon AVRE400 - page 3

    II n CA UTIONS ON INST ALLA TION z z z Wall z z For proper heat dispersal, do not install this unit in a confined space, such as a bookcase or similar enclosure. • More than 12 in. (0.3 m) is recommended. n NO TES ON USE WARNINGS • Avoid high temperatures. Allow for sucient heat dispersion when installed in a rack. • Handle the p ...

  • Denon AVRE400 - page 4

    1 Thank you for purchasing this Denon product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading this manual, be sure to keep it for future reference. Getting started Basic instructions ··················································· ...

  • Denon AVRE400 - page 5

    2 Features Digital video processor upscales analog video signals (SD resolution) to HD (720p/1080p) and 4K This unit features a sophisticated video processor that can upscale standard definition (SD) analog video content from legacy sources such as a VCR to HD and is able to output at 4K resolution (3840 x 2160 pixels) for compatibility with newly ...

  • Denon AVRE400 - page 6

    3 Cautions on handling • Before turning the power on Check once again that all connections are correct and that there are no problems with the connection cables. • Power is supplied to some of the circuitry even when the unit is set to the standby mode. When going on vacation or leaving home for long periods of time, be sure to unplug the ...

  • Denon AVRE400 - page 7

    Basic instructions 4 F Connections v page5 F Setup v page21 F Playback (Basic operation) v page28 F Network content v page45 F Selecting a listening mode (Sound Mode) v page71 For speaker connections, see page79 . Basic instructions Here we explain the connections and basic operation methods for this unit. Basic instructions Advan ...

  • Denon AVRE400 - page 8

    5 Important information Make connections before using this unit. To create a home theater that can play back higher quality video and audio by fully utilizing the capabilities of this unit and your video devices, connect this unit to each of your video devices with HDMI cables. n HDMI devices v page9 v page10 v page10 v page10 v page ...

  • Denon AVRE400 - page 9

    6 Important information Converting input video signals for HD output (Video conversion function) This unit is equipped with three types of video input connectors (HDMI, component video and composite video) and one type of video output connector (HDMI). This function automatically converts various formats of video signals input to this unit into the ...

  • Denon AVRE400 - page 10

    7 Connecting HDMI devices You can connect up to seven HDMI-compatible devices (6-inputs/1-output) to the unit. If the device connected to this unit is equipped with an HDMI connector, it is recommended to use HDMI connections. Connections with an HDMI cable oer the following benefits that can not be achieved with other connection methods. •? ...

  • Denon AVRE400 - page 11

    8 Connecting HDMI devices n About ARC (Audio Return Channel) function This function plays TV audio on this unit by sending the TV audio signal to this unit via the HDMI cable. If a TV without the ARC function is connected via HDMI connections, video signals of the playback device connected to this unit are transmitted to the TV, but this unit can n ...

  • Denon AVRE400 - page 12

    9 Connecting HDMI devices Connecting this unit to a TV via HDMI connections Cables used for connections Audio and video cable (sold separately) HDMI cable • This interface allows transfer of digital video signals and digital audio signals over a single HDMI cable. (ARC) IN HDMI TV • Video signals are not output if the input video signals ...

  • Denon AVRE400 - page 13

    10 Connecting HDMI devices OUT HDMI G Front panel H Video camcorder • When connecting a device that supports Deep Color or 4K, please use a “High Speed HDMI cable” or “High Speed HDMI cable with Ethernet”. • Video signals are not output if the input video signals do not match the display’s resolution. In this case, switch the Bl ...

  • Denon AVRE400 - page 14

    11 Connecting HDMI devices n About Content Type This function was added with the HDMI standard. It automatically makes settings suitable for the video- output type (content information). NOTE To enable the Content Type, set “Video Mode” to “Auto” ( v page108 ). n Deep Color ( v page142 ) When a device supporting Deep Color is connecte ...

  • Denon AVRE400 - page 15

    12 Connecting other devices For highest quality video and surround playback, it is recommended to use an HDMI cable to connect this unit to TV and other video devices ( v page7 “Connecting HDMI devices”). This section describes alternate connection methods when your device does not support HDMI connections. Connection methods for various dev ...

  • Denon AVRE400 - page 16

    13 Connecting other devices Connecting a TV • This section describes how to connect when your TV does not support ARC (Audio Return Channel). For instructions on HDMI connections, see “Connecting this unit to a TV via HDMI connections” ( v page9 ). • To listen to TV audio through this unit, use the optical digital connection. A UDI ...

  • Denon AVRE400 - page 17

    14 n Audio connection The following methods are available for connecting to this unit. Use either of the methods to make a connection. The numbers prefixed with connectors indicate the recommendation order. The smaller the number is, the higher playback quality is achieved. a DIGITAL AUDIO COAXIAL connector When a multichannel audio (digital bit s ...

  • Denon AVRE400 - page 18

    15 Connecting other devices Connecting a DVD player This section describes how to connect a DVD player that does not support HDMI connections. For instructions on HDMI connections, see “Connecting HDMI devices” ( v page7 ). R L R L VIDEO AUDIO AUDIO R L OUT OUT VIDEO a a DVD player n Audio connection The following methods are available for c ...

  • Denon AVRE400 - page 19

    16 Connecting an iPod or USB memory device to the USB port • You can enjoy music stored on an iPod or USB memory device. • For operating instructions see “Playing an iPod” ( v page 30 ) or “Playing a USB memory device” ( v page33 ). Cables used for connections To connect an iPod to this unit, use the USB adapter cable that w ...

  • Denon AVRE400 - page 20

    17 Connecting other devices Connecting a CD player You can enjoy CD sound with the player connected by digital or analog cables. R L R L a A UDIO A UDIO R L OUT CD player n Audio connection The following methods are available for connecting to this unit. a AUDIO IN (CD) connector This makes an analog audio connection. The sections in the connection ...

  • Denon AVRE400 - page 21

    18 Connecting an FM/AM antenna • Connect the FM antenna supplied with the unit to enjoy listening to radio broadcasts. • After connecting the antenna and receiving a broadcast signal ( v page 36 “Listening to FM/AM broadcasts”), fix the antenna with tape in a position where the noise level becomes minimal. n AM loop antenna assemb ...

  • Denon AVRE400 - page 22

    19 Connecting to a home network (LAN) You can connect this unit to your home network (LAN) to perform various types of playbacks and operations as follows. Make network connections for this unit by carefully reading information on this page. • Playback of network audio such as Internet Radio and from your media server(s) • Playback of mus ...

  • Denon AVRE400 - page 23

    20 Connecting the power cord After completing all the connections, insert the power plug into the power outlet. To household power outlet (AC 120 V, 60 Hz) Power cord NOTE • Do not plug in the power cord until all connections have been completed. However, when the “Setup Assistant” is running, follow the instructions in the “Setup Assist ...

  • Denon AVRE400 - page 24

    21 The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. This is called “Audyssey ® Setup”. To perform measurement, place the Setup and measurement microphone in multiple locations all around the listening area. For best results, we recommend you measure in six p ...

  • Denon AVRE400 - page 25

    22 2 Set up the subwoofer If using a subwoofer capable of the following adjustments, set up the subwoofer as shown below. For details, see your subwoofer’s manual. n When using a subwoofer with a direct mode Set the direct mode to “On” and disable the volume adjustment and crossover frequency setting. n When using a subwoofer without a direct ...

  • Denon AVRE400 - page 26

    23 Preparation (Continued) Detection & Measurement (Main) Set up speakers (Audyssey® Setup) 5 Select “Start” and then press ENTER . Audyssey Setup Back Next Connect the calibration microphone to the SETUP MIC input on the front the AV receiver. 6 Select “Next” and then press ENTER . The subwoofer volume setting screen is displayed. Aud ...

  • Denon AVRE400 - page 27

    24 Calculation Set up speakers (Audyssey® Setup) 11 Repeat step 10, measuring positions 3 to 6. When measurement of position 6 is completed, a “Measurements finished.” message is displayed. Audyssey Setup Repeat Last Test Calculation Measurements finished. 12 Select “Calculation” and then press ENTER . Measuring results are analyzed, and ...

  • Denon AVRE400 - page 28

    25 Set up speakers (Audyssey® Setup) 14 Select “Store” and then press ENTER . Save the measurement results. Audyssey Setup Now storing...Please wait. 50% Audyssey Setup Distances Speaker Config. Levels Crossovers Store Check processing results. To proceed, press “Store”. • Saving the results requires about 20 seconds. • During sa ...

  • Denon AVRE400 - page 29

    26 Error messages NOTE • An error message is displayed if Audyssey ® Setup could not be completed due to speaker placement, the measurement environment, etc. If an error message is displayed, check the relevant items and perform the necessary measures. Then perform Audyssey ® Setup again. • If the result still diers from the actual c ...

  • Denon AVRE400 - page 30

    27 Check Results This function enables you to check the measurement results and equalizer characteristics after Audyssey ® Setup. 1 Press SETUP to display the menu on the TV screen. 2 Use u to select “Speakers” – “Audyssey ® Setup” and then press ENTER or p . 3 Use i to select “Check Results” and then press ENTER . Audyssey Setup Ch ...

  • Denon AVRE400 - page 31

    28 Playback (Basic operation) Setup ( v page21 ) n Turning the power on ( v page28 ) n Selecting the input source ( v page28 ) n Adjusting the master volume ( v page29 ) n Turning o the sound temporarily ( v page29 ) n Playing a Blu-ray Disc player/DVD player ( v page29 ) n Playing a CD player ( v page29 ) n Playing an iPod ...

  • Denon AVRE400 - page 32

    29 Adjusting the master volume Use VOLUME df to adjust the volume. • The volume display method varies depending on the “Scale” setting ( v page104 ). n When the “Scale” setting ( v page104 ) is “0 – 98” G Adjustable range H 0.0 0.5 – 98.0 n When the “Scale” setting ( v page104 ) is “–79.5dB – 18.0dB” G Adju ...

  • Denon AVRE400 - page 33

    30 Playing an iPod You can use the USB cable provided with the iPod to connect the iPod with the unit’s USB port and enjoy music stored on the iPod. For information on the iPod models that can be played back with this unit, see “Connecting an iPod or USB memory device to the USB port” ( v page16 ). Listening to music on an iPod The iPod di ...

  • Denon AVRE400 - page 34

    31 Playing an iPod n Setting operation mode (iPod Browse Mode) In this mode, various lists and screens during playback on the iPod are displayed on the TV screen. This section describes the steps up to playing back tracks on the iPod in “On-Screen”. 1 Press iPod/USB to switch the input source to “iPod/ USB”. 2 Press OPTION . The option menu ...

  • Denon AVRE400 - page 35

    32 Playing an iPod n Performing repeat playback (Repeat) 1 Press OPTION with “iPod Browse Mode” set to “On-Screen”. The option menu screen is displayed. 2 Use ui to select “Repeat”, then press ENTER . OPTION iPod Title Now Playing Artist Album 00:06 100% Previous Option Pause Next Back Option Repeat Random iPod Browse Mode Video Select ...

  • Denon AVRE400 - page 36

    33 Playing a USB memory device Playing back music or viewing still picture (JPEG) files stored on a USB memory device. Important information • Only USB memory devices conforming to mass storage class and MTP (Media Transfer Protocol) standards can be played on this unit. • This unit is compatible with USB memory devices in “FAT16” or ...

  • Denon AVRE400 - page 37

    34 Playing files stored on USB memory devices 1 Connect the USB memory device to the USB port ( v page16 ). 2 Press iPod/USB to switch the input source to “iPod/USB”. D&M1 D&M2 D&M3 Music1 Music2 Music3 Music4 OPTION USB [1/9] Option 3 Use ui to select the search item or folder, then press ENTER or p . 4 Use ui to select the fi ...

  • Denon AVRE400 - page 38

    35 Playing a USB memory device n USB memory device operation buttons Operation buttons Function CH/PAGE df Page search INFO Display of information such as the source name, volume, and sound mode name etc. OPTION Text Search / Repeat playback / Random playback / Slideshow Interval / Video Select / Picture Mode / All Zone Stereo uio p Cursor operatio ...

  • Denon AVRE400 - page 39

    36 Listening to FM/AM broadcasts For antenna connections, see “Connecting an FM/AM antenna” ( v page18 ). How to tune in The modes for receiving FM broadcasts consists of “Auto” mode that automatically searches available broadcast stations and “Manual” mode that lets you tune in using buttons to change the frequency. The default sett ...

  • Denon AVRE400 - page 40

    37 Listening to FM/AM broadcasts n Changing the screen display duration Make this setting at “Now Playing” ( v page 110 ) in the menu. The default setting is “Always On”. When “Auto O” is set, the on-screen display is turned o 30 seconds after an operation. Press uio p while the display is o to return to the original screen. ...

  • Denon AVRE400 - page 41

    38 Listening to FM/AM broadcasts n Tuning in by entering the radio frequency (Direct Tune) You can enter the receiving frequency directly to tune in. 1 Press TUNER to switch the input source to “TUNER”. 2 Press OPTION . The option menu screen is displayed. 3 Use ui to select “Direct Tune”, then press ENTER . The direct tuner screen is displ ...

  • Denon AVRE400 - page 42

    39 Listening to FM/AM broadcasts n Presetting the current broadcast station (Preset Memory) Your favorite broadcast stations can be preset so that you can tune them in easily. Up to 56 stations can be preset. 1 Tune in the broadcast station you want to preset. 2 Press OPTION . The option menu screen is displayed. 3 Use ui to select “Preset Memory ...

  • Denon AVRE400 - page 43

    40 Listening to FM/AM broadcasts n Changing the tuning mode (Tune Mode) You can change the mode for tuning into FM broadcasts. If you cannot tune in automatically with “Auto” mode, then change the mode to “Manual” and tune in manually. 1 Press TUNER to switch the input source to “TUNER”. 2 Press OPTION . The option menu screen is displa ...

  • Denon AVRE400 - page 44

    41 Listening to FM/AM broadcasts n Tuning in to radio stations and presetting them automatically (Auto Preset Memory) Up to 56 stations can be preset. If “Auto Preset Memory” is performed after performing “Preset Memory”, the “Preset Memory” settings will be overwritten. 1 Press TUNER to switch the input source to “TUNER”. 2 Press O ...

  • Denon AVRE400 - page 45

    42 Listening to FM/AM broadcasts n Specify a name for the preset broadcast station (Preset Name) You can set the name to the preset broadcast station or change it. Up to eight characters can be input. 1 Press TUNER to switch the input source to “TUNER”. 2 Press OPTION . The option menu screen is displayed. 3 Use ui to select “Preset Name”, ...

  • Denon AVRE400 - page 46

    43 Listening to FM/AM broadcasts n Skipping preset broadcast stations (Preset Skip) You can set in advance, the stations you do not want to be displayed when tuning in, by groups or by stations. The preset skip setting is useful when tuning in, because only your favorite stations are displayed. 1 Press TUNER to switch the input source to “TUNER? ...

  • Denon AVRE400 - page 47

    44 Listening to FM/AM broadcasts Cancelling preset skip 1 While the Preset Skip screen is displayed, use o p to select a group containing a broadcast station to cancel the skip for. 2 Use ui to select a broadcast station to cancel the skip for. G TV Screen H TUNE+/- STEREO AUTO CH / OPTION TUNER FM 92.10MHz Now Playing Tune Preset Option Preset Ski ...

  • Denon AVRE400 - page 48

    45 Listening to Internet Radio Internet Radio refers to radio broadcasts distributed over the Internet. Internet Radio stations from around the world can be received. Important information The broad cast station types and specifications supported by this unit for playback are as follows. G Playable broadcast station types H Supported file types I ...

  • Denon AVRE400 - page 49

    46 Listening to Internet Radio n Adjusting the sound quality (Restorer) Make this setting at “Restorer” ( v page103 ) in the menu. You can use the Restorer function to improve the fidelity of compressed audio sources such as content from Internet Radio stations. The Restorer has selectable levels of restoration. The default setting is “Lo ...

  • Denon AVRE400 - page 50

    47 Listening to Internet Radio n Using vTuner to add Internet Radio stations to favorites There are many Internet Radio stations in the world, and this unit can tune into these stations. But finding the radio station you want to hear may be dicult, because there are too many stations. If this is the case, then please use vTuner, an Internet Rad ...

  • Denon AVRE400 - page 51

    48 Playing back files stored on a PC and NAS This unit can play back music files and playlists (m3u, wpl) stored on a PC and on Network Attached Storage (NAS) that supports DLNA. Important information • The network audio playback function of this unit connects to the server using technologies shown below. • Windows Media Player Network ...

  • Denon AVRE400 - page 52

    49 Playing back files stored on a PC and NAS Applying media sharing settings Here, we apply the settings to share music files stored on a PC and NAS on the network. n Sharing media stored in PC If you are using a Media Server, be sure to apply this setting first. When using Windows Media Player 12 (Windows 7 / Windows 8) NOTE Perform this proced ...

  • Denon AVRE400 - page 53

    50 Playing back files stored on a PC and NAS Playing back files stored on a PC and NAS Use this procedure to play music files, image files or playlists. 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page 19 “Connecting to a home network (LAN)”). w If settings are required, make the “Setti ...

  • Denon AVRE400 - page 54

    51 Playing back files stored on a PC and NAS Operations available through the OPTION button Press the OPTION button to display a menu of functions that can be used on the TV screen. Select the function you want to use from this menu. You can easily find and use the desired function. n Searching content with keywords (Text Search) ( v page63 ) ...

  • Denon AVRE400 - page 55

    52 Using online services This unit supports playback of the online services shown below. n About Flickr ( v page53 ) Flickr is an online photograph sharing service that started in 2004. You can use the this unit to view photographs that have been made public by Flickr users. You do not need an account to use Flickr. To view photographs that you ...

  • Denon AVRE400 - page 56

    53 Using online services Viewing photographs on the Flickr site You can view photographs shared by particular users, or all of the photographs shared on Flickr. n Viewing photographs shared by particular users 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page 19 “Connecting to a home network (LA ...

  • Denon AVRE400 - page 57

    54 Using online services n Viewing all photographs on Flickr 1 Use ui to select “All Content”, then press ENTER or p . OPTION Flickr [1/2] Add Flickr Contact All Content Option 2 Use ui to select the folder, and then press ENTER or p . Interestingness Displays photographs that are popular from the number of user comments or number of times they ...

  • Denon AVRE400 - page 58

    55 Using online services Listening to Pandora® 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page 19 “Connecting to a home network (LAN)”). w If settings are required, make the “Settings” ( v page121 ). e Complete step 4 and obtain a Pandora account. • If you already have a Pandora ...

  • Denon AVRE400 - page 59

    56 Using online services Operations available through the OPTION button Press the OPTION button to display a menu of functions that can be used on the TV screen. Select the function you want to use from this menu. You can easily find and use the desired function. n Displaying your desired video on the monitor during audio playback (Video Select) ( ...

  • Denon AVRE400 - page 60

    57 Using online services n Listening to an existing station Use ui and select the radio station (“D&M2 Radio”) that you want to listen to, and press ENTER or p . OPTION D&M2 Radio Title Now Playing Artist Album 00:06 100% Pause Next Menu Back Option Listening to created radio stations at random Use ui to select “Quick Mix”, then pre ...

  • Denon AVRE400 - page 61

    58 Using online services n Pandora operation buttons Operation buttons Function CH/PAGE df Page search INFO Display of information such as the source name, volume, and sound mode name OPTION Video Select / Picture Mode / All Zone Stereo uio p Cursor operation / Skips the current track, subject to skip limit ( i ) ENTER (Press and release) Enter ENT ...

  • Denon AVRE400 - page 62

    59 Using online services Listening to SiriusXM Internet Radio Over 120 channels of the SiriusXM programming you love, including commercial-free music plus sports, talk, news and entertainment. Listen anywhere on your computer or smartphone. 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page 19 “C ...

  • Denon AVRE400 - page 63

    60 Using online services n Sign out Disassociate this unit from your SiriusXM account. 1 While the SiriusXM top menu is displayed, press BACK . 2 When the popup menu appears, use o p to select “Yes”, then press ENTER . OPTION BACK SiriusXM [1/20] Pop Rock Dance/Electronic Hip-Hop/R&B Country Christian Jazz/Standards Option Exit Sign Out Are ...

  • Denon AVRE400 - page 64

    61 Using online services Listening to Spotify Introduce your Denon to a whole new world of music. With Spotify, you can enjoy instant access to millions of songs. A Spotify Premium subscription is required. For details, see the Spotify homepage. http://www.spotify.com 1 Prepare for playback. q Check the network environment, then turn on this unit? ...

  • Denon AVRE400 - page 65

    62 Using online services 9 Press p while a track is playing. The Spotify menu screen is displayed. [1/3] Star this track Browse “Artist name” Browse “Album name” Track-Artist Back Star this track Adds a star to the selected track. Browse “Artist name” Displays the list of albums by the artist of the track that is being played back. Brow ...

  • Denon AVRE400 - page 66

    63 Convenient functions Here, we explain how to use convenient functions for NETWORK sources and USB sources. The source names under the titles of each function’s description are sources that allow use of these functions. n Searching content with keywords (Text Search) ( v page63 ) n Performing repeat playback (Repeat) ( v page63 ) n Perfor ...

  • Denon AVRE400 - page 67

    64 Convenient functions Performing random playback (Random) USB Media Server Spotify 1 While content is playing, press OPTION . The option menu screen is displayed. 2 Use ui to select “Random”, then press ENTER . OPTION USB Title Now Playing Artist Album 00:06 100% Previous Option Pause Next Back MP3 128kbps Option Repeat Random Slideshow Video ...

  • Denon AVRE400 - page 68

    65 Convenient functions Favorites function There are two ways to add content to favorites: q Add to favorites from the Option menu w Add to the FAVORITE STATION button n Add to favorites from the Option menu (Save to Favorites) Internet Radio Media Server You can add up to 100 items as favorites for all sources (Internet Radio and Media Server). 1 ...

  • Denon AVRE400 - page 69

    66 Convenient functions n Deleting content added to favorites (Remove from Favorites) 1 Press NETWORK . 2 Use uio p to select “Favorites”, then press ENTER . Favorites Internet Radio Media Server Spotify Network 3 Use ui to select the content you want to delete from favorites, then press OPTION . The option menu screen is displayed. 4 Use ui to ...

  • Denon AVRE400 - page 70

    67 Convenient functions Adjusting the picture quality for your viewing environment (Picture Mode) CBL/SAT DVD Blu-ray GAME AUX MEDIA PLAYER USB Internet Radio Media Server CD z TV AUDIO z z You can set the picture mode when an HDMI, component video or video connector is assigned. 1 While content is playing, press OPTION . The option menu screen is ...

  • Denon AVRE400 - page 71

    68 Convenient functions All Zone Stereo function You can play back music in multi-zones (ZONE2) simultaneously that is played back in MAIN ZONE. It is useful when you want to enjoy the same music at the same time in multiple rooms during home party or when you want to play back the same BGM in the entire house. The All Zone Stereo function can be s ...

  • Denon AVRE400 - page 72

    69 AirPlay function Enjoy music from your iTunes library with high quality sound anywhere in your home. Use the Apple Remote App z for iPhone, iPod touch and iPad to control iTunes from any room in your home. z Available as a free download from the App Store. n Streaming music stored in iPhone, iPod touch, or iPad directly to the unit If you update ...

  • Denon AVRE400 - page 73

    70 AirPlay function n Perform iTunes playback operations with the remote control unit of this unit With this unit’s remote control unit, you can perform iTunes song play, pause, and auto search (cue) operations. 1 Select “Edit” – “Preferences...” on the menu. 2 Select “Devices” in the iTunes setting window. 3 Check “Allow iTunes a ...

  • Denon AVRE400 - page 74

    71 Selecting a listening mode (Sound Mode) This unit allows you to enjoy various kinds of surround and stereo playback modes. Multi-channel audio formats are provided on popular movie and music disc formats such as Blu-ray and DVD, as well as being supported by digital broadcasting, and even by streaming movies and music from internet-based subscri ...

  • Denon AVRE400 - page 75

    72 Selecting a listening mode n Listening mode • The following listening modes can be selected using the MOVIE , MUSIC , GAME , and PURE buttons. • Adjust the sound field eect with the menu “Surround Parameter” ( v page101 ) to enjoy surround sound the way you like it. Operation button Input signal Listening mode 2-channel z 1 ...

  • Denon AVRE400 - page 76

    73 Selecting a listening mode Operation button Input signal Listening mode 2-channel z 1 STEREO DOLBY PL g x Game z 2 DOLBY PL g Game z 2 DOLBY PL g z Height z 2 MULTI CH STEREO VIDEO GAME VIRTUAL Multi-channel z 3 STEREO Dolby Digital DOLBY DIGITAL DOLBY DIGITAL EX DOLBY DIGITAL + PL g z Dolby TrueHD DOLBY TrueHD DOLBY TrueHD + EX DOLBY TrueHD + P ...

  • Denon AVRE400 - page 77

    74 Selecting a listening mode n Description of listening mode types Dolby listening mode Listening mode type Description DOLBY PL g x z 1 This mode can be selected when the Dolby Pro Logic g x decoder is used to play back 2-channel sources in 6.1/7.1-channel surround sound including the surround back channel(s). By adding the surround back channel( ...

  • Denon AVRE400 - page 78

    75 Selecting a listening mode Original listening mode Listening mode type Description MULTI CH STEREO This mode is for enjoying stereo sound from all speakers. Stereo audio (2 channel) sources are played back via the front (L/R) speakers, the surround speakers and if connected the surround back speakers. ROCK ARENA This mode simulates the expansive ...

  • Denon AVRE400 - page 79

    Advanced instructions 76 F Installation/connection/setup of speakers (Advanced) v page77 F Playback (Advanced operation) v page88 F Playback in ZONE2 (Separate room) v page93 F How to make detailed settings v page95 Advanced instructions Here we explain functions and operations in more detail so that you can maximize your enjoyment with ...

  • Denon AVRE400 - page 80

    77 Procedure for speaker settings Speaker installation Speaker connection ( v page79 ) Set up speakers ( v page86 ) Speaker installation • Determine the speaker system depending on the number of speakers you are using and install each speaker and subwoofer in the room. Here, we explain how to install the speakers using a typical example. ...

  • Denon AVRE400 - page 81

    78 Speaker installation When 7.1-channel speakers are installed using front height speakers FL FR FHR FHL C SL SR SW z 1 z 2 z 3 Listening position z 1 22˚ – 30˚ z 2 22˚ – 45˚ z 3 90˚ – 110˚ G Speaker abbreviations H FL Front speaker (L) SL Surround speaker (L) FR Front speaker (R) SR Surround speaker (R) C Center speaker SB Surround ba ...

  • Denon AVRE400 - page 82

    79 Speaker connection Here we connect the speakers in the room to this unit. This section explains how to connect them using typical examples. n Connecting 7.1-channel speakers using surround back speakers ( v page81 ) n Connecting 7.1-channel speakers using front height speakers ( v page82 ) n Connecting 6.1-channel speakers using one surrou ...

  • Denon AVRE400 - page 83

    80 Speaker connection n About the speaker cable label (supplied) for channel identification The channel display section for speaker terminals on the rear panel is color-coded for each channel to be identifiable. Speaker terminals Color FRONT L White FRONT R Red CENTER Green SURROUND L Light blue SURROUND R Blue SURROUND BACK L Beige SURROUND BACK ...

  • Denon AVRE400 - page 84

    81 Speaker connection Connecting 7.1-channel speakers using surround back speakers The illustration on the right shows a connection example for performing 7.1-channel playback using the surround back speakers. To perform 7.1-channel playback using the surround back speakers, set “Assign Mode” to “Surround Back” in steps 3 to 5 for “Set up ...

  • Denon AVRE400 - page 85

    82 Speaker connection Connecting 7.1-channel speakers using front height speakers The illustration on the right shows a connection example for performing 7.1-channel playback using the front height speakers. To perform 7.1-channel playback using the front height speaker, set “Assign Mode” to “Front Height” in steps 3 to 5 for “Set up “A ...

  • Denon AVRE400 - page 86

    83 Speaker connection Connecting 6.1-channel speakers using one surround back speaker If using only one surround back speaker, connect to the “L” side of the SURROUND BACK terminal. For speaker settings in this case, see “When 6.1-channel speakers are installed” ( v page78 ). To perform 6.1-channel playback using the surround back speake ...

  • Denon AVRE400 - page 87

    84 Speaker connection Connecting 5.1-channel speakers To perform 5.1-channel playback, set “Assign Mode” to “Surround Back” in steps 3 to 5 for “Set up “Amp Assign”” ( v page86 ). NOTE • For speaker cable connections, see page79 . • For speaker impedance, see page79 . FL FR C SL SR SW Basic instructions Advanced i ...

  • Denon AVRE400 - page 88

    85 Speaker connection Connecting 2.1-channel speakers NOTE • For speaker cable connections, see page79 . • For speaker impedance, see page79 . FL FR C SW Basic instructions Advanced instructions Information Advanced instructions DVD ...

  • Denon AVRE400 - page 89

    86 1 Set up the zone mode Press MAIN to switch the zone mode. MAIN lights. Press MAIN 2 Connect the Setup and measurement microphone. Audyssey Setup Channel Select Amp Assign Check Results Restore... Start Your AV receiver can automatically measure the acoustics of your room then optimize your speakers using the included microphone. Set the followi ...

  • Denon AVRE400 - page 90

    87 Set up speakers 7 Set up “Channel Select” Use ui to select “Channel Select”, and then press ENTER . Channel Select Subwoofer Surround Back Measure Measure(2spkrs) Audyssey Setup Channel Select Amp Assign Check Results Restore... Start Your AV receiver can automatically measure the acoustics of your room then optimize your speakers using ...

  • Denon AVRE400 - page 91

    88 Setup ( v page21 ) Playback (Basic operation) ( v page28 ) Selecting a listening mode (Sound Mode) ( v page71 ) n HDMI control function ( v page88 ) n Sleep timer function ( v page89 ) n Quick select function ( v page90 ) n Web control function ( v page91 ) n Various memory functions ( v page92 ) Playback (Advanced operat ...

  • Denon AVRE400 - page 92

    89 HDMI control function If the HDMI control function does not operate properly, check the following points. • Is the TV or player compatible with the HDMI control function? • Is “HDMI Control” ( v page108 ) set to “On”? • Is “Power O Control” ( v page108 ) set to “All” or “Video”? • Are the HDMI con ...

  • Denon AVRE400 - page 93

    90 Quick select function You can save settings such as the input source selection, volume level, and sound mode at the QUICK SELECT 1 – 4 buttons. You can simply press one of the set QUICK SELECT buttons for subsequent playback to switch to various saved settings all at once. • By saving frequently used settings at the QUICK SELECT 1 – 4 b ...

  • Denon AVRE400 - page 94

    91 Web control function You can control this unit from a web control screen on a web browser. • This unit and the PC need to be connected to the network properly ( v page 19 “Connecting to a home network (LAN)”) in order to use the web control function. • Depending on the settings of your security-related software, you may not be a ...

  • Denon AVRE400 - page 95

    92 Web control function G Example 2 H Setup menu screen Video/HDMI Setup Video Picture A djust Output Settings On Screen Display TV For mar Aut o Lip Sync ON OFF HDMI Audio Out AVR TV HDMI Pass Through Last CBL/SAT DVD Blu-ray GAME AUX MEDIA PLAYER HDMI Control ON OFF ON OFF ***** Po wer Off Contr ol HDMI Setup Pass Thr ough Source Q6 Q7 Q6 Click t ...

  • Denon AVRE400 - page 96

    93 Playback in ZONE2 (Separate room) • You can operate this unit so as to enjoy audio in a room (ZONE2) other than the MAIN ZONE (room where the unit is located). • You can simultaneously play back the same source in both the MAIN ZONE and ZONE2. You can also play back separate sources in the MAIN ZONE and ZONE2. Audio output Zone playbac ...

  • Denon AVRE400 - page 97

    94 Sleep timer function • This is convenient for viewing and listening while going to sleep in ZONE2. • The sleep timer function can be set by zone. 1 Press ZONE2 to switch the zone mode. ZONE2 lights. 2 Press SLEEP and display the time you want to set. • The time switches as shown below each time SLEEP is pressed. O ff 1 0 min 20 30 ...

  • Denon AVRE400 - page 98

    95 Menu map For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page. By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences. How to make detailed settings Setting items Detailed items Description ...

  • Denon AVRE400 - page 99

    96 Menu map Setting items Detailed items Description Page General Language Sets the language for display the menu on the TV screen. 124 ZONE2 Setup Makes settings for audio playback in a ZONE2 system. 124 Zone Rename Change the display title of each zone to one you prefer. 124 Quick Select Names Change the “Quick Select” display title to one yo ...

  • Denon AVRE400 - page 100

    97 Examples of menu screen displays Typical examples are described below. G Example 1 H Menu selection screen (Top menu) Audio Dialog Level Subwoofer Level Surround Parameter Tone Restorer Audio Delay Volume Audyssey Graphic EQ Adjusts the center channel volume, making movie dialogue easier to hear q Currently selected setup item w List of GUI menu ...

  • Denon AVRE400 - page 101

    98 Examples of menu and front display Below we describe typical examples of displays on the TV screen and on the set’s display window. Menu display Front display Description Top menu display Setup Menu Audio Video Inputs Speakers Network General Setup Assistant w w Audio q Press SETUP to display the menu screen. w TV screen: Displays the selected ...

  • Denon AVRE400 - page 102

    99 Inputting characters On this unit, you can change the name displayed on the following screens to the names that you prefer. • Text Search ( v page63 ) • Preset Name ( v page42 ) • Source Rename ( v page114 ) • Friendly Name ( v page120 ) • Zone Rename ( v page124 ) • Quick Select Names ( v page125 ...

  • Denon AVRE400 - page 103

    100 Audio Make audio-related settings. Menu operation 1 Press MAIN to switch the zone mode. MAIN lights. 2 Press SETUP . The menu is displayed on the TV screen. 3 Use ui to select the menu to be set or operated. 4 Press ENTER or p to enter the setting. • To return to the previous item, press o or BACK . • Exiting the Menu, press SETUP whi ...

  • Denon AVRE400 - page 104

    101 Surround Parameter Default settings are underlined. You can adjust the surround audio sound field eects to match your preferences. The items (parameters) that can be adjusted depend on the signal being input and the currently set sound mode. For details on the adjustable parameters, see “Sound modes and surround parameters” ( v page1 ...

  • Denon AVRE400 - page 105

    102 Setting items Setting details Delay Time Adjust the audio delay time against video to extend the sound field image. You can set this when the sound mode is “MATRIX”. 0ms – 300ms (30ms) Eect Level Adjust the sound eect level of the current listening mode. 1 – 15 (10) Set to a lower level if the positioning and sense of phase of th ...

  • Denon AVRE400 - page 106

    103 Restorer Compressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the amount of data by eliminating signal components that are hard for the human ear to hear. The “Restorer” function generates the signals eliminated upon compression, restoring the sound to conditions near those of the original sound before compr ...

  • Denon AVRE400 - page 107

    104 Audio Volume Default settings are underlined. Set the MAIN ZONE (room where the unit is located) volume setting. Setting items Setting details Scale Set how volume is displayed. 0 – 98 : Display in the range 0 (Min) to 98. –79.5dB – 18.0dB : Display ---dB (Min), in the range –79.5 dB to 18.0 dB. • The “Scale” setting is applied ...

  • Denon AVRE400 - page 108

    105 Audio Setting items Setting details Dynamic EQ Solves the problem of deteriorating sound quality as volume is decreased by taking into account human perception and room acoustics. Works with MultEQ ® . On : Use Dynamic EQ. O : Do not use Dynamic EQ. is displayed when set to “On”. NOTE When the menu “Dynamic EQ” setting is “On”, ...

  • Denon AVRE400 - page 109

    106 Video Make video-related settings. Menu operation 1 Press MAIN to switch the zone mode. MAIN lights. 2 Press SETUP . The menu is displayed on the TV screen. 3 Use ui to select the menu to be set or operated. 4 Press ENTER or p to enter the setting. • To return to the previous item, press o or BACK . • Exiting the Menu, press SETUP whi ...

  • Denon AVRE400 - page 110

    107 Video Picture Adjust Default settings are underlined. Picture quality can be adjusted. We recommend leaving the settings unchanged from the default settings. First adjust the display image quality on your TV, and use this menu only when you want to make fine adjustments. • This item can be set when the input source is CBL/SAT DVD Blu-ray ...

  • Denon AVRE400 - page 111

    108 Video Setting items Setting details HDMI Control You can link operations with devices connected to HDMI and compatible with HDMI Control. On : Use HDMI control function. O : Do not use HDMI control function. • When a device that is not compatible with the HDMI control function is connected, set “HDMI Control” to “O”. • P ...

  • Denon AVRE400 - page 112

    109 Video Setting items Setting details i/p Scaler Convert the input source resolution to the resolution set. CBL/SAT z DVD z Blu-ray z GAME z AUX z MEDIA PLAYER z iPod/USB CD z NETWORK TV AUDIO z n When the input source is set other than to “iPod/USB” and “NETWORK” Analog : Use i/p (interlace-to-progressive) scaler function for analog vide ...

  • Denon AVRE400 - page 113

    110 Video On Screen Display Default settings are underlined. Select the on-screen display user interface preferences. Setting items Setting details Volume Sets where to display the master volume level. Bottom : Display at the bottom. Top : Display at the top. O : Turn display o. When the master volume display is hard to see when superimposed ...

  • Denon AVRE400 - page 114

    111 Inputs Perform settings related to input source playback. • You do not have to change the settings to use the unit. Make settings when needed. Menu operation 1 Press MAIN to switch the zone mode. MAIN lights. 2 Press SETUP . The menu is displayed on the TV screen. 3 Use ui to select the menu to be set or operated. 4 Press ENTER or p to ent ...

  • Denon AVRE400 - page 115

    112 Setting items Setting details HDMI Set this to change the HDMI input connectors assigned to the input sources. CBL/SAT DVD Blu-ray GAME AUX MEDIA PLAYER CD TV AUDIO 1 / 2 / 3 / 4 / 5 / FRONT : Assign an HDMI input connector to the selected input source. – : Do not assign an HDMI input connector to the selected input source. • At time of ...

  • Denon AVRE400 - page 116

    113 Setting items Setting details DIGITAL Set this to change the digital audio input connectors assigned to the input sources. CBL/SAT DVD Blu-ray GAME AUX MEDIA PLAYER CD TV AUDIO COAX (Coaxial) / OPT (Optical) : Assign a digital input connector to the selected input source. – : Do not assign a digital input connector to the selected input sourc ...

  • Denon AVRE400 - page 117

    114 Inputs Source Rename Change the display name of the selected input source. This is convenient when the input source name of your device and the input source name of this unit are dierent. You can change the name to suit your needs. When the renaming is completed, the name is displayed on this unit’s display and on the menu screen. Setting ...

  • Denon AVRE400 - page 118

    115 Speakers Set when changing Audyssey ® Setup settings. • If you change the speaker settings after performing Audyssey ® Setup, it will not be possible to set Audyssey MultEQ ® , Audyssey Dynamic EQ ® and Audyssey Dynamic Volume ® ( v page104 , 105 ). • Can be used without changing the settings. Please set if necessary. Menu ope ...

  • Denon AVRE400 - page 119

    116 Manual Setup Default settings are underlined. Perform when setting the speakers manually or when changing settings made in Audyssey ® Setup. • If you change the speaker settings after performing Audyssey ® Setup, it will not be possible to select Audyssey MultEQ ® , Audyssey Dynamic EQ ® and Audyssey Dynamic Volume ® ( v page104 , ...

  • Denon AVRE400 - page 120

    117 Setting items Setting details Levels Set the volume of the test tone to be the same when it is output from each speaker. Test Tone Start : Output test tone. • Front L / F. Height L / Center / F. Height R / Front R / Surround R / Surr.Back R z / Surr.Back L z / Surround L / Subwoofer : A test tone is output from the selected speaker. ...

  • Denon AVRE400 - page 121

    118 Speakers Setting items Setting details Crossovers Set the maximum frequency of the bass signal output from each channel to the subwoofer. Set the Crossover Frequency to suit the bass reproduction capability of the speaker being used. Speaker Selection : Selects how to set the crossover frequency. See the speaker manual for information concernin ...

  • Denon AVRE400 - page 122

    119 Network To use this unit by connecting it to a home network (LAN), you must configure network settings. If you set up your home network (LAN) via DHCP, set “DHCP” to “On” (use the default setting). This allows this unit to use your home network (LAN). If you assign an IP address for each device, you must use the “IP Address” settin ...

  • Denon AVRE400 - page 123

    120 Information Display network information. Setting details Friendly Name / DHCP On or O / IP Address / MAC Address MAC Address is required to make a vTuner account. IP Control Default settings are underlined. Enables network communication in standby power mode. Setting details O In Standby : Suspend network function during standby. Always O ...

  • Denon AVRE400 - page 124

    121 Network Settings Make settings for wired LAN. Only set “Settings” when connecting to a network without a DHCP function. Setting details Network Information IP Control Friendly Name Settings Diagnostics Selects how to connect to your network q DHCP -IP Address - Subnet Mask Proxy Save Cancel -Address -Port - Default Gateway - Primary DNS - S ...

  • Denon AVRE400 - page 125

    122 Network Diagnostics Used to check the network connection. Setting items Setting details Physical Connection Checks the physical LAN port connection. OK : Connected. Error : The LAN cable is not connected. Check the connection. Router Access Checks the connection from this unit to the router. OK : Accessed. Error : Failed to communicate with the ...

  • Denon AVRE400 - page 126

    123 General Make various other settings. Menu operation 1 Press MAIN to switch the zone mode. MAIN lights. 2 Press SETUP . The menu is displayed on the TV screen. 3 Use ui to select the menu to be set or operated. 4 Press ENTER or p to enter the setting. • To return to the previous item, press o or BACK . • Exiting the Menu, press SETUP w ...

  • Denon AVRE400 - page 127

    124 General Language Default settings are underlined. Set the language for display on the menu screen. Setting details English / Français / Español “Language” can also be set by the following procedure. However, the menu screen is not displayed. Following the display content to make the setting. 1. Press and hold the main unit’s ZONE2 SOURC ...

  • Denon AVRE400 - page 128

    125 Quick Select Names Change the “Quick Select” display title to one you prefer. Setting details Quick Select 1 / Quick Select 2 / Quick Select 3 / Quick Select 4 • Up to 16 characters can be input. • For character input, see page99 . Set Defaults : The input source name is returned to the default setting. • Reset : Reset to ...

  • Denon AVRE400 - page 129

    126 Information Show information about receiver settings, input signals, etc. Items Setting details Audio Show information about audio input signals. Sound Mode : The currently set surround mode. Input Signal : The input signal type. Format : The number of input signal channels (presence of front, surround, LFE). Sample Rate : The input signal’s ...

  • Denon AVRE400 - page 130

    127 General Usage Data To help us improve our products and customer service, Denon collects anonymous information about how you use your AV receiver (such as frequently used input sources and sound modes and speaker settings). Denon will never provide any information we collect to third parties. Setting details Yes : Provide Denon with information ...

  • Denon AVRE400 - page 131

    128 General Setting items Setting details Add New Feature Display new features that can be downloaded to this unit and perform an upgrade. NOTE In cases where it is not possible to connect to the network after adding a new function, connect to the network again using “Network” ( v page119 ). Upgrade Package : Display the items to be upgraded ...

  • Denon AVRE400 - page 132

    Information 129 F Part names and functions v page130 F Other information v page135 F Troubleshooting v page145 F Specifications v page149 F Index v page150 Information Here we list other information related to this unit. Please refer to this information as needed. Basic instructions Advanced instructions Information Information DVD ...

  • Denon AVRE400 - page 133

    130 Front panel For buttons not explained here, see the page indicated in parentheses ( ). Q0 Q5 Q1 Q2 Q3 Q4 r t y e q w i o u q Power operation button ( X ) ··················································· ( 28 ) Turns power to this unit on and o (standby). w Power indicator ········ ...

  • Denon AVRE400 - page 134

    131 Display t r y u i o Q0 Q1 Q2 q w e q Information display The input source name, sound mode, setting values and other information are displayed here. w Input signal indicators e MULTI ZONE indicators This lights up when ZONE2 (separate room) power is turned on ( v page93 ). r MUTE indicator This lights when the audio mute mode is selected ( v ...

  • Denon AVRE400 - page 135

    132 Rear panel See the page indicated in parentheses ( ). q w e t r Q0 y u o i q FM/AM antenna terminals (ANTENNA) ································ ( 18 ) w Speaker terminals (SPEAKERS) ··············································· ( 81 , 82 , 83 , 84 , 85 , 93 ) e Com ...

  • Denon AVRE400 - page 136

    133 Remote control unit For buttons not explained here, see the page indicated in parentheses ( ). q w e r y t i o Q000 u Q3 Q4 Q2 Q7 Q1 Q5 Q6 q ZONE SELECT buttons (MAIN, ZONE2) ················· ( 22 , 68 , 86 , 93 , 134 ) w Input source select buttons ················· ( 28 , 93 ) e FAVORITE STATION ...

  • Denon AVRE400 - page 137

    134 Remote control unit Inserting the batteries q Remove the rear lid in the direction of the arrow and remove it. w Load the two batteries properly as indicated by the marks in the battery compartment. R03/AAA e Put the rear cover back on. NOTE • Insert the specified batteries in the remote control unit. • Replace the batteries with new ...

  • Denon AVRE400 - page 138

    135 Other information n Trademark information ( v page135 ) n Surround ( v page136 ) n Relationship between video signals and monitor output ( v page140 ) n Explanation of terms ( v page142 ) “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, res ...

  • Denon AVRE400 - page 139

    136 Surround This unit is equipped with a sophisticated digital signal processing circuit that lets you play your favorite movie and music sources and listen to them with a wide range of surround sound mode choices. Sound modes and surround parameters This table shows the speakers that can be used in each sound mode and the surround parameters adju ...

  • Denon AVRE400 - page 140

    137 Surround Sound Mode ( v page71 ) Surround Parameter ( v page101 ) Subwoofer ( v page101 ) Tone z 12 ( v page103 ) Audyssey ( v page104 ) Restorer z 15 ( v page103 ) Eect Level ( v page102 ) Room Size ( v page102 ) Height Gain z 11 ( v page102 ) PRO LOGIC g / g x Music mode only NEO:6 Music mode only Panorama ( v pa ...

  • Denon AVRE400 - page 141

    138 Surround n Types of input signals, and corresponding sound modes This table shows the input signal that can be played in each sound mode. Check the audio signal of the input source then select the sound mode. Symbols in the table F This indicates the default sound mode. S This indicates the selectable sound mode. Sound Mode ( v page71 ) NOTE ...

  • Denon AVRE400 - page 142

    139 Surround Sound Mode ( v page71 ) NOTE Input signal types and formats ANALOG PCM DTS-HD DTS DOLBY DOLBY DIGITAL PCM (Multi- channel) PCM (2-channel) DTS-HD Master Audio DTS-HD High Resolution Audio DTS EXPRESS DTS ES DSCRT (With Flag) DTS ES MTRX (With Flag) DTS (5.1-channel) DTS 96/24 DOLBY TrueHD DOLBY DIGITAL Plus DOLBY DIGITAL EX (With Fl ...

  • Denon AVRE400 - page 143

    140 Relationship between video signals and monitor output MAIN ZONE MONITOR OUT Video Conversion Input connector Output connector Menu displayed HDMI COMPONENT VIDEO HDMI HDMI On A A A A Only the menu is displayed On A A S S <VIDEO> S (VIDEO) On ASA S <COMPONENT> S (COMPONENT) On A S S On S A A S <HDMI> S (HDMI) On SAS On S S A On ...

  • Denon AVRE400 - page 144

    141 Video signal resolution conversion table When “Video Conversion” ( v page108 ) is set to “On”, “i/p Scaler” ( v page 109 ) is set to “Analog”, “Analog & HDMI” or “HDMI” are set, the resolution of the input video signal can be converted to a dierent resolution for output ( v page6 “Converting input video ...

  • Denon AVRE400 - page 145

    142 Explanation of terms A Adobe RGB color, Adobe YCC601 color The color space defined by Adobe Systems Inc. Because it is a wider color space than RGB, it can produce more vivid and natural images. AirPlay AirPlay sends (plays) contents recorded in iTunes or on an iPhone/iPod touch/iPad to a compatible device via the network. ALAC (Apple Lossless ...

  • Denon AVRE400 - page 146

    143 DTS Express DTS Express is an audio format supporting low bit rates (max. 5.1 channels, 24 to 256 kbps). DTS-HD This audio technology provides higher sound quality and enhanced functionality than the conventional DTS and is adopted as an optional audio for Blu-ray Disc. This technology supports multi-channel, high data transfer speed, high samp ...

  • Denon AVRE400 - page 147

    144 W Windows Media DRM This is a copyright protection technology developed by Microsoft. Content providers are using the digital rights management technology for Windows Media contained in this device (WM-DRM) to protect the integrity of their content (Secure Content) so that their intellectual property, including copyright, in such content is not ...

  • Denon AVRE400 - page 148

    145 Troubleshooting If a problem should arise, first check the following: 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other devices operating properly? If this unit does not operate properly, check the items listed in the table below. Should the problem persist, there may be a malfu ...

  • Denon AVRE400 - page 149

    146 G Audio H Symptom Cause/Solution Page Audio is not output. • Check the connections for all devices. • Check the speaker connections and configurations. • Check whether the audio device power is turned on. • Adjust the master volume. • Cancel the mute mode. • Check the connection with the playback device and select ...

  • Denon AVRE400 - page 150

    147 G FM/AM H Symptom Cause/Solution Page Reception fails, or there is a lot of noise or distortion. • Change the antenna orientation or position. • Separate the AM loop antenna from the unit. • Use an FM outdoor antenna. • Separate the antenna from other connection cables. 18 18 18 18 G iPod / USB memory device / Internet Radio ...

  • Denon AVRE400 - page 151

    148 Symptom Cause/Solution Page A list of broadcasting stations is not displayed. • Connection to the network is unstable. Reconnect to the network or redo the “Network” setting in the menu. 19 , 119 For some radio stations, “Radio station server full” or “Connection down” is displayed and station cannot be connected to. • Sta ...

  • Denon AVRE400 - page 152

    149 Resetting the microprocessor Perform this procedure if the display is abnormal or if operations cannot be performed. Note that when the microprocessor is reset, all the settings are reset to their default values. X SOURCE SELECT 1 SOURCE SELECT 0 1 Turn o the power using X . 2 Press X while simultaneously pressing SOURCE SELECT 0 and SOURCE ...

  • Denon AVRE400 - page 153

    150 v Numerics 2.1-channel ························································· 85 3D ······································································· 11 4K ··························? ...

  • Denon AVRE400 - page 154

    151 v L Language ·························································· 124 Lch Level ·························································· 124 Levels ····································· ...

  • Denon AVRE400 - page 155

    LICENSE License This section describes software license used for this unit. To maintain the correct content, the original (English) is used. n Boost http://www.boost.org/ Boost Software License - Version 1.0 - August 17th, 2003 Permission is hereby granted, free of charge, to any person or organization obtaining a copy of the software and accompany ...

  • Denon AVRE400 - page 156

    LICENSE 9. Termination. a. This License and the rights granted hereunder will terminate automatically upon any breach b y Y ou of any term of this License. Individuals or entities who ha ve received Deriv at ive Works from Y ou under this License, how ever , will not hav e their licenses terminated provided such individuals or entities remain in fu ...

  • Denon AVRE400 - page 157

    LICENSE 3. The names of its contributors may not be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY ...

  • Denon AVRE400 - page 158

    Dimensions Unit : in. (mm) 11 11/32 (288.0) 13 5/32 (334.0) 6 15/32 (164.5) 2 1/8 (54.0) 2 47/64 (69.5) 37/64 (14.5) 5 13/16 (147.5) 6 3/8 (162.0) 17 3/32 (434.0) 13 35/64 (344.0) 2 23/64 (60.0) 1 49/64 (45.0) 1 49/64 (45.0) 47/64 (18.5) 1 5/64 (27.5) Weight : 20 lbs 12 oz (9.4 kg) Basic instructions Advanced instructions Information Information DV ...

  • Denon AVRE400 - page 159

    D&M Holdings Inc. 3520 10213 00AD V00 www.denon.com ...

Manufacturer Denon Category Stereo Receiver

Documents that we receive from a manufacturer of a Denon AVRE400 can be divided into several groups. They are, among others:
- Denon technical drawings
- AVRE400 manuals
- Denon product data sheets
- information booklets
- or energy labels Denon AVRE400
All of them are important, but the most important information from the point of view of use of the device are in the user manual Denon AVRE400.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Denon AVRE400, service manual, brief instructions and user manuals Denon AVRE400. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Denon AVRE400.

Similar manuals

A complete manual for the device Denon AVRE400, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Denon AVRE400 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Denon AVRE400.

A complete Denon manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Denon AVRE400 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Denon AVRE400, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Denon AVRE400, that we can find in the current document
3. Tips how to use the basic functions of the device Denon AVRE400 - which should help us in our first steps of using Denon AVRE400
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Denon AVRE400
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Denon AVRE400 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Denon AVRE400?

Use the form below

If you did not solve your problem by using a manual Denon AVRE400, ask a question using the form below. If a user had a similar problem with Denon AVRE400 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)