English dropdown-ico

Manual Kenwood KDC-V7018R

46 pages 0.81 mb
Download

Go to site of 46

Summary
  • Kenwood KDC-V7018R - page 1

    KDC-7018 KDC-V7018R KDC-5018 ©B 64-1877-00 (MW) CD-RECEIVER INSTR UCTION MANU AL COMPACT DIGITAL AUDIO ...

  • Kenwood KDC-V7018R - page 2

    — 2 — English Contents Safety precautions Safety precautions .............................................3 Handling Compact discs ....................................5 General features Power ................................................................7 Volume...............................................................7 Attenuator ...... ...

  • Kenwood KDC-V7018R - page 3

    — 3 — To prevent injury or fire, take the following precautions: • Insert the unit all the way in until it is fully locked in place. Otherwise it may fall out of place when jolted. • When extending the ignition, battery, or ground wires, make sure to use automotive- grade wires or other wires with a 0.75mm 2 (AWG18) or more to prevent wire ...

  • Kenwood KDC-V7018R - page 4

    — 4 — English • If you experience problems during installation, consult your Kenwood dealer. • Press the reset button if the disc auto changer is first controlled and operates incorrectly. The original operating condition will return. • We strongry recommend the use of the Security Code function (see p. 28) to prevent theft. • Character ...

  • Kenwood KDC-V7018R - page 5

    — 5 — Handling Compact discs Playing a CD that is dirty, scratched or warped can cause the sound to skip and the unit to operate incorrectly, resulting in worsened sound quality. Take the following precautions to prevent your CDs from getting scratched or damaged. Handling CDs • Do not touch the recorded side of the CD (the side opposite the ...

  • Kenwood KDC-V7018R - page 6

    — 6 — English Do Not Load CD Accessories Do not use commercially available CD accessories that can be loaded into the CD slot, such as stabilizers, protective sheets, or CD cleaning discs, since they can cause the unit to malfunction. Removing the CD Only remove the CD from the machine in a horizontal direction, holding it flat. You may damage ...

  • Kenwood KDC-V7018R - page 7

    This function allows you to turn down the volume quickly. Turning Attenuator On/Off: Press the ATT button to switch the attenuator on and off. When the attenuator is on, the ATT indicator blinks. When the attenuator is off, the volume returns to the original level. Turning the volume up, or turning it all the way down deactivates the attenuator fun ...

  • Kenwood KDC-V7018R - page 8

    You can recall the best audio setting preset for different types of the music. Switching the Preset Sound Setting: Each time you press the Q button, the preset sound setting switches as follows: As you proceed, each indicator would go on. The System Q function changes the values of the following NOTE Flat Easy Rock Jazz Pops Top 40 Scan of Flat – ...

  • Kenwood KDC-V7018R - page 9

    Function of the KDC-7018 You can turn the non-fading output on and off. Turning non-fading output On/Off : Press the NF button for at least one second to set the function ON or OFF. "NF ON" is displayed when the non-fading output is set ON. Non-Fading Output Changing the Clock Display: Each time you press the CLK button, the display switc ...

  • Kenwood KDC-V7018R - page 10

    Do not set the right side of the faceplate in the faceplate bracket first, when reattaching the faceplate. Doing so may cause the connector on the faceplate bracket to malfunction. Press the right side of the faceplate until it locks. Hiding the control panel: Press the release button and slide open the faceplate. Push upward the back of the contro ...

  • Kenwood KDC-V7018R - page 11

    Audio control features While the control panel is sliding, only available buttons are 0 , ATT, ▲ , ▼ and SRC. NOTE — 11 — AM FM 4¢ Q KDC-7018/KDC-5018 KDC-V7018R Selecting mode Setting value Selecting mode Setting value ...

  • Kenwood KDC-V7018R - page 12

    Adjust the Non-fading output level. Display and setting: "NF Level" : - 15 – + 15 Non-Fading Level Adjust the fader level. Display and setting: "Fader" : Rear 15 – Front 15 Fader Level Adjust the balance level. Display and setting: "Balance" : Left 15 – Right 15 Balance Level Adjust the treble level. Display and ...

  • Kenwood KDC-V7018R - page 13

    Set the sound level of the each source selected by adjusting the level difference between the basic sound level and the required level. Display and setting: "V Offset"/"VOL Offset" : - 8 – ± 0 Volume Offset Function of the KDC-7018 Adjust the phase for Non-Fading output. Display and setting: "NF Phase" : Normal (0° ...

  • Kenwood KDC-V7018R - page 14

    Store the frequency of a station. You can then recall that station with a single touch of a button. Select the band/station that you want to have stored. 1 Station Preset Memory Press the SRC (source) button repeatedly to select the tuner mode. "TUNER" is displayed when the tuner mode has been selected. Press either the FM or AM button to ...

  • Kenwood KDC-V7018R - page 15

    Function of the KDC-V7018R RDS features You can change the display used when listening to the radio. Switching the Display: Each time you press the DISP button, the display changes as follows: Displaying Frequencies during program service name display: Press the DISP button for at least one second. The frequency for the RDS station will be displaye ...

  • Kenwood KDC-V7018R - page 16

    Preset the volume level to be used for traffic information and news broadcasts. Tune into the station for which you want to set the volume. 1 Presetting Volume for Traffic Information/News Press the TI button to turn the function on and off. When the function is on, the TI indicator is turned on. When none is being received, the TI indicator will b ...

  • Kenwood KDC-V7018R - page 17

    This function permits the text to be scrolled and the entire text to be displayed. The scrolling method differs depending on the setting of scrolling in the menu. To scroll manually: Press the DISP button to display the Radio Text. Pressing the DISP button for at least one second results in one scrolling display of the text. To scroll automatically ...

  • Kenwood KDC-V7018R - page 18

    24. Jazz Music (Jazz) 25. Country Music (Country) 26. National Music (Nation M) 27. Oldies Music (Oldies) 28. Folk Music (Folk M) 29. Documentary (Document) ( Speech .....1~9,16~23, 29, Music .....10~15, 24~28) • You can select the type of program directly by pressing a preset button. The buttons are factory-set to the following type of programs: ...

  • Kenwood KDC-V7018R - page 19

    Function of the KDC-7018/KDC-5018 T uner features Changing the display language to another language. Press the PTY button. "PTY" is displayed, and the Program Type Selection (PTY) Mode entered. Enter the Changing Language Mode Press the DISP button to enter the changing language mode. Changing the Display Language Press the FM or AM butto ...

  • Kenwood KDC-V7018R - page 20

    You can automatically store all the receivable frequencies in the band currently being listened to, and then recall them with the touch of a button later. This function is especially useful when you are travelling and do not know what stations are available. Up to six frequencies can be stored this way. Select the band for auto memory entry. Press ...

  • Kenwood KDC-V7018R - page 21

    Switch the frequency step used in seeks. The factory defaults are 50 kHz for FM and 9 kHz for AM. While pressing buttons #1 and #5 at the same time, press the reset button. The frequency step settings will be changed to 200 kHz for FM and 10 kHz for AM. When you change the frequency step settings, all memory contents will be erased. Returning Frequ ...

  • Kenwood KDC-V7018R - page 22

    Playing CDs: Press the release button to slide open the faceplate, showing the CD insertion slot. Holding the CD with the labeled side facing up, insert it in the slot. The CD will start playing. Push back the bottom of the faceplate with your hand until it locks. The IN indicator will light when a CD has been inserted. When inserting a CD, make su ...

  • Kenwood KDC-V7018R - page 23

    Each time you press the DISP button, the display during disc play switches as follows: • You can give names to discs through the presetting disc name function (page 26). Note that depending on the unit, display may not be possible. • If you try to display the name of a disc that does not have one, "NO NAME" is displayed instead. •W ...

  • Kenwood KDC-V7018R - page 24

    Repeat playing the track or the disc currently being listened to. Turning Repeat Play On/Off: Press the REP button to switch repeat track/disc play on and off as follows: "Repeat ON"/"T-Repeat ON" is displayed and the track number blinks in the display when track repeat is on. "Disc Repeat ON"/"D-Repeat ON" i ...

  • Kenwood KDC-V7018R - page 25

    Play the tracks on all the discs in the disc changer in random order. Press the M.RDM button to switch magazine random play on and off. "M.Random ON" is displayed when magazine random play is turned on. The disc and track numbers will change over and over in the display as the next track is being selected. When the disc/track has been sel ...

  • Kenwood KDC-V7018R - page 26

    Store the names of discs to be displayed when played. Play the disc whose name you want to preset. • This function is not available for disc changers that do not feature the Disc Name Preset function. • The Disc Name Preset function cannot be used during the Magazine random play as well as while a disc title or track title is displayed. Press t ...

  • Kenwood KDC-V7018R - page 27

    If you have preset the name of a disc that you want to listen to in the disc changer, you can look for it by name and start playing it. Press the DNPP button on the remote. "DNPP" will appear in the display, and the disc name preset play mode is entered. The preset names/disc titles of the disc in the disc changer to which you are current ...

  • Kenwood KDC-V7018R - page 28

    After a security code has been registered, power cannot be restored if the battery is disconnected from the unit unless the code is first input. All the steps in this procedure (1 through 7) must be completed NOTE Security Code You can set the defaults for additional functions in the menu mode. Make a setting for each function, referring to the fol ...

  • Kenwood KDC-V7018R - page 29

    This function produces a beep sound that accompanies button operation. It can be switched on or off. Display and setting: "Beep ON" : Beep setting is on. (Default setting) "Beep OFF" : Beep setting is off. The beep sound is not output from the preout jacks. NOTE Touch Sensor Tone "ENTER" and "CODE" will appea ...

  • Kenwood KDC-V7018R - page 30

    Function of the KDC-V7018R You can set the display to a desired color. Display and setting: Select the display "Color" during the selecting function in the menu mode. To set a color manually: Hold down on the 4 or ¢ button. Pressing the ¢ button advances the color, and pressing the 4 button reverses it. When the desirable color appears, ...

  • Kenwood KDC-V7018R - page 31

    Adjust the bass boost level of the external amplifier using the main unit. Display and setting: "AMP Bass FLT" : Bass boost level is flat. (Default setting) "AMP Bass +6" : Bass boost level is low (+6dB). "AMP Bass +12" : Bass boost level is high (+12dB). As of December 2000, the power amplifiers controllable by the ma ...

  • Kenwood KDC-V7018R - page 32

    Function of the KDC-V7018R You can automatically store all the receivable frequencies in the band currently being listened to, and then recall them with the touch of a button later. This function is especially useful when you are travelling and do not know what stations are available. Up to six frequencies can be stored this way. Display and settin ...

  • Kenwood KDC-V7018R - page 33

    Function of the KDC-V7018R When the TI function is on and poor reception conditions are experienced when listening to a traffic information station, another traffic information station with better reception will be searched for automatically. This function is on, when unit is first powered on. Display and setting: "ATPS ON" : The Auto TP ...

  • Kenwood KDC-V7018R - page 34

    OK A T T TUNE TRACK DNPP/ SBF DSIC REMOTE CONTROL UNIT FM/DISC + ATT AM/DISC DNPP + 38 TUNE + / ¢ /TRACK + OK TUNE / 4 /TRACK SRC SRC 4 ¢ 38 FM + AM – Basic Operations of remote This function permits the CD text, MD title, and Radio text to be scrolled and the entire text to be displayed. Switching between manual scrolling and automatic scrolli ...

  • Kenwood KDC-V7018R - page 35

    Each time you press the SRC button, the mode switches as follows: • The mode switches to the next mode from any mode which cannot be used. • The external disc control mode will differ depending on the unit that is connected. • To enable the selection of External disc control mode 2/AUX mode, you should connect optional switching adapter KCA- ...

  • Kenwood KDC-V7018R - page 36

    • 4 / ¢ buttons Press the 4 button to search through the tracks backward. Press the ¢ button to search through the tracks forward. Use to move the cursor while entering disc name. • DISC buttons (for disc changers) Press the DISC – button to search through the discs backward. Press the DISC + button to search through the discs forward. Sele ...

  • Kenwood KDC-V7018R - page 37

    — 37 — The use of any accessories except for those provided might result in damage to the unit. Make sure only to use the accessories shipped with the unit, as shown above. 2 CAUTION ..........................................1 ..........................................1 ..........................................2 1 2 3 4 External view Number of ...

  • Kenwood KDC-V7018R - page 38

    English — 38 — Connecting Wires to Terminals ILLUMI EXT.CONT. TEL MUTE ANT. CONT. P.CONT P.CONT ANT. CONT. + + + + FRONT • L FRONT • R REAR • L REAR • R – + FRONT NON FADING REAR When only two speakers are being connected to the system, connect the connectors either to both the front output terminals or to both the rear output termina ...

  • Kenwood KDC-V7018R - page 39

    — 39 — Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip). NOTE Accessory 2 Metal mounting strap Self-tapping screw (commercially available) Firewall or metal support Accessory 6 Installation ■ Installation 6 mm MAX. M5mm M5mm 6 mm MAX. Installing in Japanese-M ...

  • Kenwood KDC-V7018R - page 40

    English — 40 — Installation Removing the hard rubber frame ■ When the upper level is removed, remove the lower two locations. 3 The frame can be removed from the bottom side in the same manner. NOTE Catch Lock Refer to the section “Theft deterrent faceplate (P. 10)” and then remove the faceplate. Engage the catch pins on the removal tool ...

  • Kenwood KDC-V7018R - page 41

    — 41 — Installation Accessory 7 If you want to lock the faceplate to the unit so that it does not fall off, follow the directions below. Refer to the function "Theft Deterrent Faceplate" (page 10) and remove the faceplate. Insert the provided screw into the hole at the center of the bottom side of the faceplate which you have removed ...

  • Kenwood KDC-V7018R - page 42

    English — 42 — What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. Troubleshooting Guide SOLUTION POSSIBLE CAUSE PROBLEM One of the speaker wires is being pinched by a screw in the car. Check the speaker wiring ...

  • Kenwood KDC-V7018R - page 43

    — 43 — Troubleshooting Guide SOLUTION POSSIBLE CAUSE PROBLEM Free switching of the sound quality. The system Q function is set on Scan mode. Refer to the “System Q” page and switch it to a function other than Scan mode. (see p. 8). Can’t remove disc. The cause is that more than 10 minutes has elapsed since the vehicle ACC switch was turne ...

  • Kenwood KDC-V7018R - page 44

    English — 44 — SOLUTION POSSIBLE CAUSE PROBLEM If the following situations, consult your nearest service center: • Even though the disc changer is connected, the Disc Changer Mode is not on, with "AUX" showing in the display during the Changer Mode. • Even though no device (KCA-S210A, CA-C1AX, KDC-CPS87, KDC-CX87, KDC-CPS85, KDC-C ...

  • Kenwood KDC-V7018R - page 45

    — 45 — Troubleshooting Guide The following messages are displayed when certain problems are occurring in your system. Take the recommended actions. Nothing has been recorded on the MD. Blank DISC No disc magazine has been loaded in the changer. The disc magazine is not completely loaded. ] Load the disc magazine properly. No CD in the unit. ] I ...

  • Kenwood KDC-V7018R - page 46

    English — 46 — FM tuner section (KDC-7018/5018) Frequency range (200 kHz space) ............87.9 MHz – 107.9 MHz Frequency range (50 kHz space) ..............87.5 MHz – 108.0 MHz Usable sensitivity (S/N = 30dB) .................... 9.3dBf (0.8 µV/75 Ω ) Quieting Sensitivity (S/N = 50dB) ............... 15.2dBf (1.6 µV/75 Ω ) Frequency ...

Manufacturer Kenwood Category Car Stereo System

Documents that we receive from a manufacturer of a Kenwood KDC-V7018R can be divided into several groups. They are, among others:
- Kenwood technical drawings
- KDC-V7018R manuals
- Kenwood product data sheets
- information booklets
- or energy labels Kenwood KDC-V7018R
All of them are important, but the most important information from the point of view of use of the device are in the user manual Kenwood KDC-V7018R.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Kenwood KDC-V7018R, service manual, brief instructions and user manuals Kenwood KDC-V7018R. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Kenwood KDC-V7018R.

Similar manuals

A complete manual for the device Kenwood KDC-V7018R, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Kenwood KDC-V7018R by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Kenwood KDC-V7018R.

A complete Kenwood manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Kenwood KDC-V7018R - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Kenwood KDC-V7018R, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Kenwood KDC-V7018R, that we can find in the current document
3. Tips how to use the basic functions of the device Kenwood KDC-V7018R - which should help us in our first steps of using Kenwood KDC-V7018R
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Kenwood KDC-V7018R
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Kenwood KDC-V7018R in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Kenwood KDC-V7018R?

Use the form below

If you did not solve your problem by using a manual Kenwood KDC-V7018R, ask a question using the form below. If a user had a similar problem with Kenwood KDC-V7018R it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)