English dropdown-ico

Manual AllTrade 691164

15 pages 0.6 mb
Download

Go to site of 15

Summary
  • AllTrade 691164 - page 1

    It is the owner and/or operator’ s responsibility to study all W ARNINGS, operating, and maintenance instructions contained on the product label and instruction manual prior to operation of this unit. The owner/operator shall retain product instructions for future ref erence. #540020 Air Nailer/Stapler Operation Manual #691164 #691165 ...

  • AllTrade 691164 - page 2

    The owner and/or operator is responsib le f or maintenance, maintaining all decals or warning labels and while in use, maintaining the unit in good working order . If the owner and/or operator is not fluent in English, F rench or Spanish, the product warnings and instructions shall be read and discussed with the operator’ s native language b y th ...

  • AllTrade 691164 - page 3

    3 NAILER/ST APLER SPECIFICA TIONS Compressed Air: Maximum permissible operating pressure: 120PSI (0.8 MP a) Recommended operating pressure range: 60-100PSI (0.4-0.7 MP a) Magazine Capacity: Appro x.100 Brad Nails/Staples Rotatable Exhaust Cap W ork Contact Element (WCE) Dischar ge Area Nail/Staple Loading Area Magazine T rigger Air and Oil Inlet Qu ...

  • AllTrade 691164 - page 4

    4 NAIL/ST APLE INFORMA TION Fastener Gauge 18 Gauge Brad Nails 18 Gauge Cro wn Staples Fastener Lengths 5/8"-2" 3/8"-1" Quick Plug Quick Plug (Optional) Oiler Air Hose Filter Quick Coupler (Optional) Regulator Quick Coupler Air Hose Recommended Hookup NAILS: Can use brad nails from the f ollowing branded air-po wered brad nailer ...

  • AllTrade 691164 - page 5

    UNP ACKING & INSPECTION Do not operate this air nailer/stapler if damaged during shipment, handling or mis- use. Damage may result in b ursting, which can cause serious injur y or proper ty damage. All damaged par ts must be repaired or replaced as needed prior to operating this air nailer/stapler . If you ha ve an y questions, or require assis ...

  • AllTrade 691164 - page 6

    USE COMBUSTIBLE GASSES OR ANY O THER REA CTIVE GAS AS A PO WER SOURCE FOR THIS NAILER/ST APLER. Explosion and serious personal injur y could occur . • Use clean, dry , regulated, compressed air at 60 to 100 PSI (0.4 to 0.7 MP A). Do not connect the nailer/stapler to any pressure source that ma y e xceed 120 PSI (0.8 MP A). • Only use air hose t ...

  • AllTrade 691164 - page 7

    7 Checking the Nailer/Stapler for Proper Operation: BEFORE EA CH USE, Y OU MUST CHECK FOR THE PROPER OPERA TION OF THE WORK CONT ACT ELEMENT (WCE). • The WCE is the mechanism on the nailer/stapler that is pressed into the w or k piece prior to pulling the trigger . It must work properly to prev ent accidental discharge of f asteners. • The WCE ...

  • AllTrade 691164 - page 8

    • F or the nailer/stapler to operate, y our finger must first be off the trigger and the work contact element of the nailer/stapler then pressed against the work piece. Once the wor k contact element is pressed against the work piece, pull the trigger to drive the f astener into the work piece. • Release the trigger after each fastener is driv ...

  • AllTrade 691164 - page 9

    9 Problem Solutions Loose screws . Tighten screws . W or n or damaged o-rings or seals Contact f actor y for service. 1-800-423-3598 Symptom: Air leak near top of nailer/stapler or in trigger area. Problem Solutions Inadequate air supply . Check compressor settings Chec k air hose/filters Inadequate lubrication. f or kinks or bloc kage. Oil nailer/ ...

  • AllTrade 691164 - page 10

    10 11 A0308-0241 Firing V alv e Piston 12 A0200-0251 O-Ring 13 A0200-0081 O-Ring 14 A0205-0111 Gasket 15 A0200-0721 O-Ring 16 A0602-0171 Piston Head 17 A0011-0051 Driver Blade Pin 18 A0011-0051 Outer Spring Pin 19 A0011-0061 Inner Spring Pin 20 A0600-0771 Driver Blade 21 A0305-0071 Collar 22 A0200-0301 O-Ring 23 A0303-0141 Cylinder 24 A0309-0011 Bu ...

  • AllTrade 691164 - page 11

    59 A0000-0211 Screw 60 A0000-0011 Screw 61 A0005-0051 W asher 62 A0004-0001 He x Nut 63 A0709-0081 Click Le ve r 64 A0103-0061 Spring 65 A0706-0201 Spring Holder 66 A0006-0041 Step Pin 67 A0000-0091 Screw 68 A0200-0241 O-Ring 69 QA276-0021 Steel Bar 70 A0100-0031 Compression Spring 71 A0314-0141 Exhaust V alve Site 72 A0716-0171 End Stopper 73 A070 ...

  • AllTrade 691164 - page 12

    12 NAILER P ARTS DIAGRAM , , , , , ...

  • AllTrade 691164 - page 13

    13 1 A0304-0301 Exhaust V alve Collar 2 A0200-1261 O-Ring 3 A0000-0101 Screw 4 A0005-0031 W asher 5 A0301-0141 Cylinder Cap 6 A0311-0121 Air Seal 7 B0300-0671 Exhaust V alve Assemb ly 8 A0100-0221 Spring 9 A0200-0231 O-Ring 10 A0200-0071 O-Ring 11 A0308-0241 Firing V alv e Piston 12 A0200-0251 O-Ring 13 A0205-0111 Gasket 14 A0305-0071 Collar 15 A03 ...

  • AllTrade 691164 - page 14

    14 No. Part No. Description ST APLER P ARTS LISTING 49 A0100-0211 Compression Spring 50 A0711-0463 Release Catch 51 A0801-0901 Driver Guide 52 A0801-1161 Driver Guide Cov er 53 A0005-0071 W asher 54 A0000-0001 Screw 55 QA277-0011 Click Le ve r 56 A0101-0021 T orsion Spring 57 A0004-0001 He x Nut 58 A0006-0021 Step Pin 59 A0002-0001 Screw 60 B0600-1 ...

  • AllTrade 691164 - page 15

    15 ST APLER P ARTS DIAGRAM , , , , 96 ...

Manufacturer AllTrade Category Nail Gun

Documents that we receive from a manufacturer of a AllTrade 691164 can be divided into several groups. They are, among others:
- AllTrade technical drawings
- 691164 manuals
- AllTrade product data sheets
- information booklets
- or energy labels AllTrade 691164
All of them are important, but the most important information from the point of view of use of the device are in the user manual AllTrade 691164.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals AllTrade 691164, service manual, brief instructions and user manuals AllTrade 691164. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product AllTrade 691164.

Similar manuals

A complete manual for the device AllTrade 691164, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use AllTrade 691164 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of AllTrade 691164.

A complete AllTrade manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual AllTrade 691164 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the AllTrade 691164, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the AllTrade 691164, that we can find in the current document
3. Tips how to use the basic functions of the device AllTrade 691164 - which should help us in our first steps of using AllTrade 691164
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with AllTrade 691164
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of AllTrade 691164 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning AllTrade 691164?

Use the form below

If you did not solve your problem by using a manual AllTrade 691164, ask a question using the form below. If a user had a similar problem with AllTrade 691164 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)