English dropdown-ico

Manual Pitco PE14D

12 pages 0.54 mb
Download

Go to site of 12

Summary
  • Pitco PE14D - page 1

    L80-045 Re v 0 (11/07) IMPORTANT FOR FUTURE R EFERENCE Please complete this information and retain these instructions for the life of the equipment: Model #: _____________ ___________ __ Serial #: ________________ __________ Date Upgraded: ____________________ Technician: ________________ ________ Installation Instructions for the PE14D/PG14D Manua ...

  • Pitco PE14D - page 2

    L80-045 Re v0 (11/ 07) 2 Tool required to perform this upgrade: 5/32” Allen Key 5/16” Sock et, Nut Driver, or Wrench 3/8” Wrench 1/2” Wrench 3/4” Wrench 7/8” Wrench 13/16” Wrench 1 1/4” Wrench 1/2” Punch Hammer Teflon Tape #2 Phillips Channel Locks Before you begin : Verify that you have all the parts for the model that you are up ...

  • Pitco PE14D - page 3

    L80-045 Re v0 (11/ 07) 3 Ensure kit is complete. Part number B8702901-CL. 1. Qty.1 B3615401-C Bezel 2. Qty.3 PP10911 Fitting 3. Qty.1 A8017902-C Bracket 4. Qty.1 PP10830 Fitting 5. Qty.1 A1826101-C Bracket 6. Qty.1 PP10944 Knob 7. Qty.1 PP10726 Check Valve 8. Qty.2 PP10270 U-Bolt 9. Qty.2 PP10694 Screw 9. Qty.4 P0092300 Nut 10. Qty.1 A8017501 Pipin ...

  • Pitco PE14D - page 4

    L80-045 Re v0 (11/ 07) 4 15. Qty.1 L80045 Instruction Manual Exploded Part view ...

  • Pitco PE14D - page 5

    L80-045 Re v0 (11/ 07) 5 1. From the back, remove the eight 5/16” screws that hold the rear cover on. 2. With the rear of the tank exposed, rem ove the fill port plug with a 1/2” in wrench. Then remove the reducer with a 7/8” wrench. S ave the reducer, as it will be reused. 3. With the nylon plug exposed it can now be removed. The hole in the ...

  • Pitco PE14D - page 6

    L80-045 Re v0 (11/ 07) 6 4. Apply Teflon tape to the 90° comp ression fitting (PP109 11) and install. Make sure the fitting is at the 3 o’clock position when fully tightened. 5. Apply the compression fitting (PP10830) to the front end of the fill piping (A8017501) before insta ll. Apply the remaining two 90° compression fitting (PP10911) to eac ...

  • Pitco PE14D - page 7

    L80-045 Re v0 (11/ 07) 7 7. Apply Teflon tape to the rear fitting of the supply piping. Install the check valve (PP10726) onto the rear fitting of the supply piping with the support bracket (A1826101-C) be tween the valve and fitting. 8. Install the supply piping assembly from the front. The assem bly should contain the piping, two fittings, check ...

  • Pitco PE14D - page 8

    L80-045 Re v0 (11/ 07) 8 9. From the front of the unit, remove th e four Allen head screws with a 5/32” Allen Key. Unplug the comput er and set front panel assembly aside. Remove the heat shie ld via three 5/16” screws. 10. With the heat shield removed remove the no fill option cover plate. The plate is held in place with three 5/16” screws w ...

  • Pitco PE14D - page 9

    L80-045 Re v0 (11/ 07) 9 11. Apply Teflon tape the NPT ends of the fitting bodies removed earlier. Assemble the fittings with fill valve (PP10945). Add the knob extension to the assembly and install. Make sure the flat side of the “D” shaft faces the 90° fitting. 12. Install the manual fill option cover plate (A1826101-C) using the original ha ...

  • Pitco PE14D - page 10

    L80-045 Re v0 (11/ 07) 10 14. Apply the new manual fill option overl ay (A6066901) to the new manual fill option bezel (B3615401-C). With a 3/ 8” wrench, remove the four kep nuts that hold the controller to the original bezel and install it onto the new bezel using the original hardware. 15. Reconnect the controller plug and m ount the bezel usin ...

  • Pitco PE14D - page 11

    L80-045 Re v0 (11/ 07) 11 THIS PAGE LEFT INTE NTIONALLY BLANK ...

  • Pitco PE14D - page 12

    L80-045 Re v0 (11/ 07) 12 In t he event of pr oblems w it h or questi ons about y our order, please contac t t he Pitco Fr ialat or f act ory at (800)258-3708 US and Canada only (603)225- 6684 W orl d Wide In t he event of pr oblems w it h or questi ons about y our equi pment , please cont act the Pi tco Fri alator Author ized Serv ice and Part s r ...

Manufacturer Pitco Category Fryer

Documents that we receive from a manufacturer of a Pitco PE14D can be divided into several groups. They are, among others:
- Pitco technical drawings
- PE14D manuals
- Pitco product data sheets
- information booklets
- or energy labels Pitco PE14D
All of them are important, but the most important information from the point of view of use of the device are in the user manual Pitco PE14D.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Pitco PE14D, service manual, brief instructions and user manuals Pitco PE14D. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Pitco PE14D.

Similar manuals

A complete manual for the device Pitco PE14D, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Pitco PE14D by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Pitco PE14D.

A complete Pitco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Pitco PE14D - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Pitco PE14D, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Pitco PE14D, that we can find in the current document
3. Tips how to use the basic functions of the device Pitco PE14D - which should help us in our first steps of using Pitco PE14D
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Pitco PE14D
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Pitco PE14D in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Pitco PE14D?

Use the form below

If you did not solve your problem by using a manual Pitco PE14D, ask a question using the form below. If a user had a similar problem with Pitco PE14D it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)