English dropdown-ico

Manual Giant P220-3100

16 pages 0.47 mb
Download

Go to site of 16

Summary
  • Giant P220-3100 - page 1

    Contents: Installation Instructions: page 2 Pump Specifications: pages 3- 9 Exploded View: page 10 Parts List / Kits: page 11 Torque Specifications: page 11 Repair Instructions : pages 12-13 Pump mounting selection Guide: page 13 Trouble Shooting Guide Recommened Spare Parts List: page 14 Dimensions: page 15 Warranty Information: back page Triplex ...

  • Giant P220-3100 - page 2

    2 INSTALLATION INSTRUCTIONS 4. Use of a dampener is necessary to minimize pulsation at drive elements, plumbing, connec- tions, and other system areas. The use of a dampener with Giant Industries, Inc. pumps is optional, although recommended by Giant Industries, Inc. to further reduce system pulsa- tion. Dampeners can also reduce the severity of pr ...

  • Giant P220-3100 - page 3

    3 Specifications Model P217A-3100/5100 Consult the factory for special requirements that must be met if the pump is to operate beyond one or more of the limits specified above. U.S. (Metric) 1750 RPM + Ratings ......................................................... 1.8 GPM @ 2000 PSI ...... (6.8 LPM @ 137 bar) 3450 RPM + Ratings ................. ...

  • Giant P220-3100 - page 4

    4 Consult the factory for special requirements that must be met if the pump is to operate beyond one or more of the limits specified above. Specifications Model P218A-3100/5100 U.S. (Metric) V olume ......................................................... 3.4 GPM ................... (12.5 LPM) Discharge Pressure ................................... ...

  • Giant P220-3100 - page 5

    5 Specifications Model P219A-3100/5100 Consult the factory for special requirements that must be met if the pump is to operate beyond one or more of the limits specified above. PUMP PULLEY MOTOR PULLEY RPM GPM 800 PSI 1200 PSI 1500 PSI 1700 PSI 2000 PSI 7.75 5.25 1150 2.7 1.5 2.2 2.8 3.2 3.7 7.75 6.50 1450 3.5 1.9 2.9 3.6 4.1 4.8 7.75 7.25 1750 4.2 ...

  • Giant P220-3100 - page 6

    6 Specifications Model P220A-3100/5100 Consult the factory for special requirements that must be met if the pump is to operate beyond one or more of the limits specified above. PUMP PULLEY MOTOR PULLEY RPM GPM 800 PSI 1200 PSI 1500 PSI 1700 PSI 2000 PSI 7.75 5.25 1150 3.1 1.7 2.6 3.2 3.6 4.3 7.75 6.50 1450 3.9 2.2 3.2 4.0 4.6 5.4 7.75 7.75 1750 4.7 ...

  • Giant P220-3100 - page 7

    7 NOTE: In order to drive the pump from the side opposite the present shaft extension, simply remove the valve casing from the crankcase and rotate the pumps 180 degrees to the desired position. Be certain to rotate the seal case (item #20) as well, so that the weep holes are down at the six o'clock position. Exchange the oil fill and the oil ...

  • Giant P220-3100 - page 8

    8 NOTE: In order to drive the pump from the side opposite the present shaft extension, simply remove the valve casing from the crankcase and rotate the pumps 180 degrees to the desired position. Be certain to rotate the seal case (item #20) as well, so that the weep holes are down at the six o'clock position. Exchange the oil fill and the oil ...

  • Giant P220-3100 - page 9

    9 NOTE: In order to drive the pump from the side opposite the present shaft extension, simply remove the valve casing from the crankcase and rotate the pumps 180 degrees to the desired position. Be certain to rotate the seal case (item #20) as well, so that the weep holes are down at the six o'clock position. Exchange the oil fill and the oil ...

  • Giant P220-3100 - page 10

    10 Exploded View - P200A-3100/5100 Series ...

  • Giant P220-3100 - page 11

    11 ITEM PART NO. DESCRIPTION QTY. 1 08300 Crankcase 1 2 08301-0100 Dipstick 1 3 08302 Crankcase Plug Cover 1 3A 07190-0100 Drain Plug & Gasket 1 4 08005 O-Ring 1 5 08185-0100 Oil Drain Plug with seal 1 6 07188-0100 Screw, 316 S.S. 4 6A 07223-0100 Spring Washer, 316 S.S. 4 7 08303 Bearing Cover I 2 8 08490 Sight Glass 1 9 08492 O-Ring 1 10 07225 ...

  • Giant P220-3100 - page 12

    12 REPAIR INSTRUCTION - P200A-3100/5100 SERIES 1. With a 22mm socket wrench, remove the (3) discharge valve plugs and (3) inlet valve plugs (32) Inspect the o-ring (33) for wear and replace if dam- aged. 2. Using a needle nose pliers, remove the inlet and discharge valve assemblies (27-30) and o-ring (31). Inspect all parts for wear and replace as ...

  • Giant P220-3100 - page 13

    13 Disassembly sequence of the back end of the P200A-3100/5100 series pump. 1 ) Before you begin, drain the oil from the crankcase. 2) Remove the crankcase cover (3) and o-ring (4) from the crankcase (1). To remove the crankshaft (13), remove the bearing cover (7) and sight glass (8). Using a rubber mallet, remove the crankshaft axially through the ...

  • Giant P220-3100 - page 14

    14 Preventative Maintenance Check-List & Recommended Spare Parts List Check Daily Weekly 50hrs Every Every Every 500 hrs 1500 hrs 3000 hrs Oil Level/Quality X Oil Leaks X Water Leaks X Belts, Pulley X Plumbing X Recommended Spare Parts Oil Change X X Seal Spare Parts (1 kit/pump) X (See page 11 for kit list) Oil Seal Kit (1 kit/pump) X (See pag ...

  • Giant P220-3100 - page 15

    15 P200A-3100/5100 DIMENSIONS - INCHES (mm) ...

  • Giant P220-3100 - page 16

    GIANT INDUSTRIES LIMITED WARRANTY Giant Industries, Inc. pumps and accessories are warranted by the manufacturer to be free from defects in workmanship and material as follows: 1. For portable pressure washers and car wash applications, the discharge manifolds will never fail, period. If they ever fail, we will replace them free of charge. Our othe ...

Manufacturer Giant Category Water Pump

Documents that we receive from a manufacturer of a Giant P220-3100 can be divided into several groups. They are, among others:
- Giant technical drawings
- P220-3100 manuals
- Giant product data sheets
- information booklets
- or energy labels Giant P220-3100
All of them are important, but the most important information from the point of view of use of the device are in the user manual Giant P220-3100.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Giant P220-3100, service manual, brief instructions and user manuals Giant P220-3100. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Giant P220-3100.

Similar manuals

A complete manual for the device Giant P220-3100, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Giant P220-3100 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Giant P220-3100.

A complete Giant manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Giant P220-3100 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Giant P220-3100, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Giant P220-3100, that we can find in the current document
3. Tips how to use the basic functions of the device Giant P220-3100 - which should help us in our first steps of using Giant P220-3100
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Giant P220-3100
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Giant P220-3100 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Giant P220-3100?

Use the form below

If you did not solve your problem by using a manual Giant P220-3100, ask a question using the form below. If a user had a similar problem with Giant P220-3100 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)