Manual Seagate Savvio 600GB SAS

88 pages Not applicable
Download

Go to site of 88

Summary
  • Seagate Savvio 600GB SAS - page 1

    Product Manual Savvio ® 10K.5 SAS 100628561 Rev . D March 201 1 St andard Models ST9900805SS ST9600205SS ST9450405SS ST9300605SS Self-Encrypting Drive Models ST9900705SS ST9600105SS ST9450305SS ST9300505SS SED FIPS 140-2 Models ST9900605SS ST9600005SS ST9450205SS ST9300405SS ...

  • Seagate Savvio 600GB SAS - page 2

    Revision history © 201 1 Seagate T echnology LLC. All rights reser ved. Publication number: 1006 28561, Rev . D March 201 1 Seagate, Seagate T echnology and the W ave logo are registered tr ademarks of Se agate T echnology LLC in the United S tates and/or other countries. Sa vvio and SeaT ools are either tra demarks or regis - tered trademarks of ...

  • Seagate Savvio 600GB SAS - page 3

    Savvio 10K.5 SAS Product Manual, Rev. D i Content s 1.0 Seagate Technology support services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2.0 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 3.0 Applic ...

  • Seagate Savvio 600GB SAS - page 4

    ii Savvio 10K.5 SAS Product Manual, Rev. D 7.4 Power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 7.5 Environmental limits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 7.5.1 Temperature . . . . . . . . ...

  • Seagate Savvio 600GB SAS - page 5

    Savvio 10K.5 SAS Product Manual, Rev. D iii 12.4.1 SAS physical interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 12.4.2 Physical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 12.4.3 Connector requirements. . . . . . . . . . . . . . . . . . ...

  • Seagate Savvio 600GB SAS - page 6

    iv Savvio 10K.5 SAS Product Manual, Rev. D ...

  • Seagate Savvio 600GB SAS - page 7

    Savvio 10K.5 SAS Product Manual, Rev. D v List of Figures Figure 1. Curren t profiles fo r 900GB mo dels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Figure 2. Current profiles for 600G B models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Figure 3. Curren ...

  • Seagate Savvio 600GB SAS - page 8

    ...

  • Seagate Savvio 600GB SAS - page 9

    Savvio 10K.5 SAS Product Manual, Rev. D 1 1.0 Seagate T echnology support services SEAGA TE ONLINE SUPPORT and SERVICES For information regarding pr oducts and services, visit http://www . sea gate.com/www/en-us/ about/contact_us/ Available ser vices include: Presales & T echnical support Global Support Services telephone nu mbers & busines ...

  • Seagate Savvio 600GB SAS - page 10

    2 Savvio 10K.5 SAS Pro duct Manual, Rev. D 2.0 Scope This manual describes Seagate T echnology ® LLC, Savvio ® 10K.5 SAS (Serial Attach ed SCSI) disc drives. Savvio drives support the SAS Protoc ol specifications to the extent described in this manual. The SAS Inter- face Manual (p art number 1 00293071) descri bes the general SAS characteristics ...

  • Seagate Savvio 600GB SAS - page 11

    Savvio 10K.5 SAS Product Manual, Rev. D 3 3.0 Applicable st andards an d reference document ation The drives documented in this manual have been developed a s system peripherals to th e highest st andards of design and constructio n. The drives depend on host eq uipment to provide adequate power and e nvironment for optimum performan ce and complia ...

  • Seagate Savvio 600GB SAS - page 12

    4 Savvio 10K.5 SAS Pro duct Manual, Rev. D 3.1.2 Electromagnetic compliance Seagate uses an in dependent laborator y to confirm comp liance with the directives/st andards for CE Marking and C-T ick Marking. The drive was tested in a repr esen tative system for typical applications. The selected sys- tem represe nts the most popular charac teristics ...

  • Seagate Savvio 600GB SAS - page 13

    Savvio 10K.5 SAS Product Manual, Rev. D 5 3.1.4 China Restriction of Hazardous Substa nces (RoHS) Directive This product has an Environ mental Protection Use Period (EPUP) of 20 years. The following table cont ains information man dated by China's "Marking Requirem ents fo r Control of Pollution Caused by Electronic Information Product s& ...

  • Seagate Savvio 600GB SAS - page 14

    6 Savvio 10K.5 SAS Pro duct Manual, Rev. D 4.0 General description Savvio drives provide high performance, high ca pacity da t a storage for a var iety of systems including engi- neering workst ations, network se rvers, mainframes, and su percomputers. The Serial Att ached SCSI interface is designed to meet next-generatio n computing demands for pe ...

  • Seagate Savvio 600GB SAS - page 15

    Savvio 10K.5 SAS Product Manual, Rev. D 7 4.1 St andard features Savvio ® 10K.5 SAS drives have the following standa rd features: • 1.5 / 3 / 6 Gb Serial Att ached SCSI (SAS) interface • Integrated dual port SAS controller suppor ting the SCSI protocol • Support for SAS exp anders and fanout ada pters • Firmware downlo adable using the SAS ...

  • Seagate Savvio 600GB SAS - page 16

    8 Savvio 10K.5 SAS Pro duct Manual, Rev. D Note. There is no significant performan ce differ ence between Self-En crypting Drive and st andard (non- Self-Encrypting Drive) models. 4.4 Reliability • Annualized Failure Rate (AFR) of 0.44% • Mean time betw een failures (MTBF) of 2,000 ,000 hours • Balanced low mass rotary voice coil actuator • ...

  • Seagate Savvio 600GB SAS - page 17

    Savvio 10K.5 SAS Product Manual, Rev. D 9 5.0 Performance characteristics This section provides detailed inform ation concerning performance-rela ted characteristics and featu res of Sav- vio drives. 5.1 Internal drive characteristics ST9900805SS ST9600205SS ST9450405SS ST9300605SS ST9900705SS ST9600105SS ST9450305SS ST9300505SS ST9900605SS ST96000 ...

  • Seagate Savvio 600GB SAS - page 18

    10 Savvio 10K.5 SAS Product Ma nual, Rev. D 5.2.2 Format command exe cution time for 512 -byte sectors (mi nutes) 900GB 600GB 450GB 300GB Maximum (with verify) 234 156 11 7 78 Maximum (without verify) 11 6 75 58 36 Note. There is approximately a 1.5 increase in time to format a SED drive ve rsus a non-SED drive of the same capacity . 5.2.3 General ...

  • Seagate Savvio 600GB SAS - page 19

    Savvio 10K.5 SAS Product Manual, Rev. D 11 5.4 Prefetch/multi-segmented cache control The drive provides a prefetch (read look-ahe ad) and mu lti-segmen ted cache control algorithms tha t in many cases can enhance system performance. Cache refers to the drive buf fer storage space when it is u sed in cache operations. T o select this feature, the h ...

  • Seagate Savvio 600GB SAS - page 20

    12 Savvio 10K.5 SAS Product Ma nual, Rev. D 5.5.1 Caching write data Write caching is a wr ite operat ion by the drive that makes us e of a drive buffer stor age area wher e the data to be written to the med ium is stored while the drive performs the W rite command . If read caching is enabled (RCD=0), th en data written to t he medium is r etained ...

  • Seagate Savvio 600GB SAS - page 21

    Savvio 10K.5 SAS Product Manual, Rev. D 13 6.0 Reliability specifications The following reliability specifications assume correct host and drive operational interfac e, including all inter- face timings, power supply volt ages, environment al requirements and drive mounting const raints. 6.1 Error rates The error rates st ated in this manual assume ...

  • Seagate Savvio 600GB SAS - page 22

    14 Savvio 10K.5 SAS Product Ma nual, Rev. D 6.1.3 Seek errors A seek error is defined as a failure of the drive to posi tion the heads to the addr essed track. After detecting an initial seek error , the drive automatically perfor ms an er ror recovery proce ss. If the error recovery process fails, a seek positioning error (E rror code = 15h or 02h ...

  • Seagate Savvio 600GB SAS - page 23

    Savvio 10K.5 SAS Product Manual, Rev. D 15 6.2.4 S.M.A.R.T . S.M.A.R.T . is an acronym for Self-Monitoring Analysis and Reporting T e chnology . This technology is intended to recognize conditions that indicate imminen t drive failu re and is designed to provide suf ficie nt warning of a failure to allow you to back up the dat a before an actual fa ...

  • Seagate Savvio 600GB SAS - page 24

    16 Savvio 10K.5 SAS Product Ma nual, Rev. D Error rate is the number of er rors per operation . The algori th m that S.M.A.R.T . uses to record rates of error is to set thresholds for the number of errors and their interval . If the number of errors exceeds the threshold b efore the interval expires, the err or rate is considered to be unacceptable ...

  • Seagate Savvio 600GB SAS - page 25

    Savvio 10K.5 SAS Product Manual, Rev. D 17 6.2.6 Drive Self T est (DST) Drive Self T est (DST) is a technology designe d to recogn ize drive fault conditions th at qualify the drive as a failed unit. DST validates the functiona lity of the drive at a system level. There are two test coverage options imple mented in DST : 1. Extended test 2. Sh ort ...

  • Seagate Savvio 600GB SAS - page 26

    18 Savvio 10K.5 SAS Product Ma nual, Rev. D 6.2.6.2. 3 Short and extended t ests DST has two testing options : 1. sh ort 2. extended These testing options are describ ed in the following two subsections. Each test consists of three segment s: an electrical te st segment, a servo test segmen t, and a re ad/verify scan segment. Short test (Function C ...

  • Seagate Savvio 600GB SAS - page 27

    Savvio 10K.5 SAS Product Manual, Rev. D 19 6.2.7 Product wa rranty See Section 1.0 for warranty con tact informatio n. Shipping When transporting or shipp ing a drive, use only a Seaga te-approved co ntainer . Keep your original bo x. Sea- gate approved cont ainers are ea sily identified by th e Seagate Appro ved Package label. Shipping a drive in ...

  • Seagate Savvio 600GB SAS - page 28

    20 Savvio 10K.5 SAS Product Ma nual, Rev. D 7.0 Physical/electrical specifications This section provides information relating to the physical and electrical characteristics of the dr ive. 7.1 PowerChoice TM power management Drives using the load/un load architecture provide programm able power manage ment to t ailor systems for per- formance and gr ...

  • Seagate Savvio 600GB SAS - page 29

    Savvio 10K.5 SAS Product Manual, Rev. D 21 7.1.1 PowerChoice reporting methods PowerChoice TM provides these reporting me thods for tracking purposes: Request Sense command report s • Current power conditio n • Method of en try Note. Processing the Request Sense command does not impact the drive’ s powe r save state. Mode Sense command report ...

  • Seagate Savvio 600GB SAS - page 30

    22 Savvio 10K.5 SAS Product Ma nual, Rev. D T able 2: 900GB standard drive DC power requirement s Notes 3.0Gb mode 6.0Gb mode (Amps) (A mps) (Amps) (Amps) V oltage +5V +12V [2] +5V +12V [2] Regulation [6] ±5% ±5% [2] ±5% ±5% [2] Avg idle current DC [1] [8] 0.35 0.22 0.35 0.22 Advanced Idle Current Idle_A 3 σ 0.40 0.24 0.40 0.24 Idle_B 3 σ 0.2 ...

  • Seagate Savvio 600GB SAS - page 31

    Savvio 10K.5 SAS Product Manual, Rev. D 23 T able 3: 600GB standard drive DC power requirement s Notes 3.0Gb mode 6.0Gb mode (Amps) (A mps) (Amps) (Amps) V oltage +5V +12V [2] +5V +12V [2] Regulation [6] ±5% ±5% [2] ±5% ±5% [2] Avg idle current DC [1] [8] 0.34 0.17 0.35 0.17 Advanced Idle Current Idle_A 3 σ 0.39 0.18 0.40 0.18 Idle_B 3 σ 0.27 ...

  • Seagate Savvio 600GB SAS - page 32

    24 Savvio 10K.5 SAS Product Ma nual, Rev. D T able 4: 450GB standard model DC power requirement s Notes 3.0Gb mode 6.0Gb mode (Amps) (A mps) (Amps) (Amps) V oltage +5V +12V [2] +5V +12V [2] Regulation [6] ±5% ±5% [2] ±5% ±5% [2] Avg idle current DC [1] [8] 0.34 0.17 0.34 0.17 Advanced Idle Current Idle_A 3 σ 0.37 0.18 0.37 0.18 Idle_B 3 σ 0.2 ...

  • Seagate Savvio 600GB SAS - page 33

    Savvio 10K.5 SAS Product Manual, Rev. D 25 [1] Measured with average reading D C ammeter . Inst antaneous +12V current peaks will exce ed these values. Power supply at nominal voltage. N (number of drives tested) = 6, 35 Degrees C ambient. [2] For +12 V , a –10% tolerance is al lowed during initial spindl e start but must return to ±5 % before r ...

  • Seagate Savvio 600GB SAS - page 34

    26 Savvio 10K.5 SAS Product Ma nual, Rev. D [5] This condition occu rs after OOB and S peed Negotiation co mpletes but before the drive has receive d the Notify S pinup primitive. [6] See paragraph 7.3.1, "Conducted noise immunity ." S pecified voltage tolerance includes rippl e, noise, and transient response. [7] Operating condition is d ...

  • Seagate Savvio 600GB SAS - page 35

    Savvio 10K.5 SAS Product Manual, Rev. D 27 7.3.3 Current profiles The +12V and +5V current profiles fo r th e Savvio 10K.4 drives are shown below . Figure 1. Current pr ofiles for 900GB models ...

  • Seagate Savvio 600GB SAS - page 36

    28 Savvio 10K.5 SAS Product Ma nual, Rev. D Figure 2. Current prof iles for 600GB models ...

  • Seagate Savvio 600GB SAS - page 37

    Savvio 10K.5 SAS Product Manual, Rev. D 29 Figure 3. Current pr ofiles for 450GB models ...

  • Seagate Savvio 600GB SAS - page 38

    30 Savvio 10K.5 SAS Product Ma nual, Rev. D Figure 4. Current prof iles for 300GB models Note: All times and currents are typical. See T ables 2 throu gh 5 for maximum current requirements. ...

  • Seagate Savvio 600GB SAS - page 39

    Savvio 10K.5 SAS Product Manual, Rev. D 31 7.4 Power dissip ation 900 GB models in 3Gb operation T ypic al power dissipation under idle conditions in 3Gb operation is 4.38 watt s (14.95 BTUs per hour) . T o obtain o perating power for typical random read o peratio ns, refer to the following I/O rate curve (see Figure 7). Locate the typical I/O rate ...

  • Seagate Savvio 600GB SAS - page 40

    32 Savvio 10K.5 SAS Product Ma nual, Rev. D 900GB models in 6Gb operati on T ypical power dissipation under idle conditions in 6Gb operation is 4.42 watt s (15.07 BTUs per hour). T o obtain o perating power for typical random read o peratio ns, refer to the follo wing I/O rate curve (see Figure 7). Locate the typical I/O rate for a d rive in your s ...

  • Seagate Savvio 600GB SAS - page 41

    Savvio 10K.5 SAS Product Manual, Rev. D 33 600 GB models in 3Gb operation T ypical power dissipation under idle conditions in 3Gb operation is 3 .78 watts (12.89 BTUs per hour) . T o obtain o perating power for typical random read o peratio ns, refer to the following I/O rate curve (see Figure 7). Locate the typical I/O rate for a d rive in your s ...

  • Seagate Savvio 600GB SAS - page 42

    34 Savvio 10K.5 SAS Product Ma nual, Rev. D 600GB models in 6Gb operati on T ypical power dissipation under idle conditions in 6Gb operation is 3.82 watt s (13.05 BTUs per hour). T o obtain o perating power for typical random read o peratio ns, refer to the follo wing I/O rate curve (see Figure 7). Locate the typical I/O rate for a d rive in your s ...

  • Seagate Savvio 600GB SAS - page 43

    Savvio 10K.5 SAS Product Manual, Rev. D 35 450GB models in 3Gb operati on T ypic al power dissipation under idle conditions in 3Gb operation is 3.73 watt s (12.73 BTUs per hour) . T o obtain o perating power for typical random read o peratio ns, refer to the following I/O rate curve (see Figure 7). Locate the typical I/O rate for a d rive in your s ...

  • Seagate Savvio 600GB SAS - page 44

    36 Savvio 10K.5 SAS Product Ma nual, Rev. D 450GB models in 6Gb operati on T ypical power dissipation under idle conditions in 6Gb operation is 3.75 watt s (12.79 BTUs per hour). T o obtain o perating power for typical random read o peratio ns, refer to the follo wing I/O rate curve (see Figure 7). Locate the typical I/O rate for a d rive in your s ...

  • Seagate Savvio 600GB SAS - page 45

    Savvio 10K.5 SAS Product Manual, Rev. D 37 300GB models in 3Gb operati on T ypical power dissipation under idle conditions in 3Gb operation is 3 .46 watts (1 1.81 BTUs per hour). T o obtain o perating power for typical random read o peratio ns, refer to the following I/O rate curve (see Figure 7). Locate the typical I/O rate for a d rive in your s ...

  • Seagate Savvio 600GB SAS - page 46

    38 Savvio 10K.5 SAS Product Ma nual, Rev. D 300GB models in 6Gb operati on T ypical power dissipation under idle conditions in 6G b operation is 3.48 watt s (1 1.88 BTUs pe r hour). T o obtain o perating power for typical random read o peratio ns, refer to the follo wing I/O rate curve (see Figure 7). Locate the typical I/O rate for a d rive in you ...

  • Seagate Savvio 600GB SAS - page 47

    Savvio 10K.5 SAS Product Manual, Rev. D 39 b. Non-operatin g –40° to 158°F (–40° to 70°C) package a mbient with a maximum grad ient of 3 6°F (20°C) per hour . This spe cification assumes that the drive is packa ged in the shipping co ntai ner designed by Seaga te for use with drive. HDA Temp. Check Point Figure 13. Location of the HDA tem ...

  • Seagate Savvio 600GB SAS - page 48

    40 Savvio 10K.5 SAS Product Ma nual, Rev. D 7.5.4.1 Shock a. Operating—normal The drive, as inst alled for normal operation, sha ll oper a te error free wh ile subjected to intermittent shock not exceeding: • 40 Gs at a maximum duration of 1 1ms (half sine wave) • 25 Gs at a maximum duration of 2ms (half sinewave) Shock may b e applied in th ...

  • Seagate Savvio 600GB SAS - page 49

    Savvio 10K.5 SAS Product Manual, Rev. D 41 7.5.4.2 Vibration a. Operating—normal The drive as inst alled for norm al operation, shall comply with the complete sp ecified performa nce while subjected to continuous vi bration not exceeding 5-500 Hz @ 0.5 G (zero to peak) Vibr ation may be applied in the X, Y , or Z axis. Operating normal translatio ...

  • Seagate Savvio 600GB SAS - page 50

    42 Savvio 10K.5 SAS Product Ma nual, Rev. D 7.5.7 Acousti cs Sound powe r during idle m ode shall be 3.0 bels typ ical when measu red to ISO 7779 specif ication. There will not be any discret e tones more than 10 dB above the masking noise on typical drives when mea- sured according to Seagate specificat ion 30553-001. There w ill not be an y tones ...

  • Seagate Savvio 600GB SAS - page 51

    Savvio 10K.5 SAS Product Manual, Rev. D 43 7.6 Mechanical specifications Refer to Figure 15 for det ailed mountin g configurat ion dimensions. See Section 1 1.3, “Dri ve mounting.” Note. These dimensions conform to the Small Form Factor S tandard documented in SFF-8201 a nd SFF-8223, found at www .sffcommittee.org. in mm in mm in mm Figure 15. ...

  • Seagate Savvio 600GB SAS - page 52

    44 Savvio 10K.5 SAS Product Ma nual, Rev. D 8.0 About FIPS The Federal Information Proce ssing S t andard (FIPS) Pub lication 140-2, FIPS PU B 140-2, is a U.S. gover n- ment computer security st andard used to accre dit cryptogr aphic modules. It is titled “Secur ity Requirements for Cryptographic Mo dules”. The initial publication was on M ay ...

  • Seagate Savvio 600GB SAS - page 53

    Savvio 10K.5 SAS Product Manual, Rev. D 45 9.0 About self-e ncrypting drives Self-encrypting drives (SEDs) offer encryption and secu rity services for the pr otection of stored dat a, com- monly known as “protection of data at rest .” These drives are compliant with the T rusted Computing Group (TCG) Enterprise S torage S pecificat ions as deta ...

  • Seagate Savvio 600GB SAS - page 54

    46 Savvio 10K.5 SAS Product Ma nual, Rev. D 9.2.2 Locking SP The Locking SP contro ls read/write a ccess to the med ia and the cryptogr aph ic erase feature. Access to the Locking SP is available using the BandMasterX or Er aseMaster p asswords. Since the drive owner ca n define up to 16 data bands on the drive, each dat a band has its own p asswor ...

  • Seagate Savvio 600GB SAS - page 55

    Savvio 10K.5 SAS Product Manual, Rev. D 47 9.7 Authenticated firmware do wnload In addition to providing a locking mechanism to preven t unwanted firmware download atte mpts, the drive also only accepts download files which have been cryptographica lly signed by the appropriate Seaga te Design Center . Three conditions must be met before the drive ...

  • Seagate Savvio 600GB SAS - page 56

    48 Savvio 10K.5 SAS Product Ma nual, Rev. D 10.0 Defect and er ror management Seagate continues to use innova tive technologies to manage d efects and erro rs. These technologies are designed to increase dat a integrity , perform drive self-mainten ance, and validat e proper drive o peration. SCSI defect and error management involves dr ive in tern ...

  • Seagate Savvio 600GB SAS - page 57

    Savvio 10K.5 SAS Product Manual, Rev. D 49 T able 6 equates the read and write retry count with th e maximum possible r ecovery time for read and write recovery of individual LBAs. The times given d o not incl ude time taken to perform reallocations. Realloca tions are perfor med when the ARRE bit (for reads ) or AWRE bit (for writes) is one, the R ...

  • Seagate Savvio 600GB SAS - page 58

    50 Savvio 10K.5 SAS Product Ma nual, Rev. D With BMS, the host system can cons ume less power and system overhe ad by only checking BMS st atus and results rath er than tying up the bus and co nsuming power in the proce ss of host-initiated media scan ning activ- ity . Since the backgrou nd scan functions ar e only done during idle pe riods, BMS ca ...

  • Seagate Savvio 600GB SAS - page 59

    Savvio 10K.5 SAS Product Manual, Rev. D 51 10.8 Protection Information (PI) Protection Information is intended as a sta ndardized ap proach to system level LRC trad itionally provided by systems using 520 byte formatted LBAs. Drives form atted with PI information provide the same , common LBA count (i.e. same capacity point) as non-PI formatted dri ...

  • Seagate Savvio 600GB SAS - page 60

    52 Savvio 10K.5 SAS Product Ma nual, Rev. D 1 1.0 Inst allation Savvio disc drive installation is a plug-and-play process. There are no jumper s, switches, or terminators on the drive. SAS drives are designed to be used in a host system that provides a SAS-compatible backplane with bays designed to accommo date the drive. In su ch systems, the host ...

  • Seagate Savvio 600GB SAS - page 61

    Savvio 10K.5 SAS Product Manual, Rev. D 53 1 1.1 Drive orientation The drive may be mounted in an y orient ation. All drive performance characterizations, however , have been done with the drive in horizontal (discs level) and vertical (drive on its si de) orient ations, which are the two pre- ferred mo unting orientations. 1 1.2 Cooling Cabinet co ...

  • Seagate Savvio 600GB SAS - page 62

    54 Savvio 10K.5 SAS Product Ma nual, Rev. D 1 1.3 Drive mounting Mount the drive usin g the bottom or side mou nting holes . If you mou nt the drive using the bottom holes, ensur e that you do not physically d istort the d rive by at tempting to mount it on a stif f, non-flat surface. The allowable mountin g surface stiffne ss is 80 lb/i n (14.0 N/ ...

  • Seagate Savvio 600GB SAS - page 63

    Savvio 10K.5 SAS Product Manual, Rev. D 55 12.0 Interface requirement s This section partially describes the interface requ irements as imp lemented on Savvio drives. Additio nal infor- mation is provided in the SAS Interface Manual (p art number 1 00293071). 12.1 SAS features This section lists the SAS-specific f eatures supported by Savvio drives ...

  • Seagate Savvio 600GB SAS - page 64

    56 Savvio 10K.5 SAS Product Ma nual, Rev. D 12.2 Dual port support Savvio SAS drives have two indep endent port s. These ports may be connected in the same or dif ferent SCSI domains. Each drive port has a unique SAS address. The two ports have the capabilit y of independent port clocki ng (e.g. both ports can run at 6Gb/s or the first port can run ...

  • Seagate Savvio 600GB SAS - page 65

    Savvio 10K.5 SAS Product Manual, Rev. D 57 ETC bit N TMC bit N LP bit N Protocol-specific Log Pa ge for SAS (18h) Y Log Sense 4Dh Y Application Client Log pa ge (0Fh) Y Buf fer Over-run/Und er-run p age (01h) N Cache S t atistics page (37h) Y Factory Log page (3Eh) Y Information Exception s Log page (2Fh ) N Last n Deferred Errors or Asyn chronous ...

  • Seagate Savvio 600GB SAS - page 66

    58 Savvio 10K.5 SAS Product Ma nual, Rev. D Persistent Reserve In 5Eh Y Persistent Reserve Out 5Fh Y Prefetch 34h N Read (6) 08h Y Read (10) 28h Y DPO bit supported Y FUA bit supporte d Y Read (12) A8h N Read (16) 88h Y Read (32) 7Fh/0009h N Read Buffer (modes 0, 2, 3, A h and Bh supp orted) 3Ch Y (non-SE D drives only) Read Cap acity (10) 25h Y Re ...

  • Seagate Savvio 600GB SAS - page 67

    Savvio 10K.5 SAS Product Manual, Rev. D 59 Security Protocol Out B5h Y (SED models only) Seek (6) 0Bh Y Seek (10) 2Bh Y Send Diagnostics 1Dh Y Supported Diagnostics page s (00h) Y T ransla te page ( 40h) Y Set Limits 33h N S tart Unit/S top Unit (spindle ceases ro tating) 1Bh Y Synchronize Cache 35h Y Synchronize Cache (16) 91h Y T est Unit Ready 0 ...

  • Seagate Savvio 600GB SAS - page 68

    60 Savvio 10K.5 SAS Product Ma nual, Rev. D [1] Savvio drives can format to 512, 520 , 524 or 528 bytes per logical bl ock. [2] W arning. Power loss during flash programming can result in firmware co rruption. This usually makes the drive inoperable. [3] Reference Mode Sense command 1Ah fo r mode p ages supported. [4] Y = Y es. Command is supported ...

  • Seagate Savvio 600GB SAS - page 69

    Savvio 10K.5 SAS Product Manual, Rev. D 61 12.3.2 Mode Sense dat a The Mode Sense command pr ovides a way for the drive to re port its o perating para mete rs to the initiator . The drive maintain s four sets of mo de paramete rs: 1. De fault values Default values are hard -coded in the drive firmwa re stored in flash E-PROM (nonvolatile memory) on ...

  • Seagate Savvio 600GB SAS - page 70

    62 Savvio 10K.5 SAS Product Ma nual, Rev. D T able 1 1: Mode Sense data for 900GB drives MODE DATA HEADER: 01 9a 00 10 01 00 00 10 BLOCK DESCRIPTOR: 00 00 00 00 68 cb 9e 30 00 00 00 00 00 00 02 00 MODE PAGES: DEF 81 0a c0 14 ff 00 00 00 05 00 ff ff CHG 81 0a ff ff 00 00 00 00 ff 00 ff ff DEF 82 0e 00 00 00 00 00 00 00 00 01 3a 00 00 00 00 CHG 82 0e ...

  • Seagate Savvio 600GB SAS - page 71

    Savvio 10K.5 SAS Product Manual, Rev. D 63 T able 12: Mode Sense dat a for 600GB drives MODE DATA HEADER: 01 9a 00 10 01 00 00 10 BLOCK DESCRIPTOR: 00 00 00 00 45 dd 2f b0 00 00 00 00 00 00 02 00 MODE PAGES: DEF 81 0a c0 14 ff 00 00 00 05 00 ff ff CHG 81 0a ff ff 00 00 00 00 ff 00 ff ff DEF 82 0e 00 00 00 00 00 00 00 00 01 3a 00 00 00 00 CHG 82 0e ...

  • Seagate Savvio 600GB SAS - page 72

    64 Savvio 10K.5 SAS Product Ma nual, Rev. D T able 13: Mode Sense values for 450GB drives MODE DATA HEADER: 01 9a 00 10 01 00 00 10 BLOCK DESCRIPTOR: 00 00 00 00 34 65 f8 70 00 00 00 00 00 00 02 00 MODE PAGES: DEF 81 0a c0 14 ff 00 00 00 05 00 ff ff CHG 81 0a ff ff 00 00 00 00 ff 00 ff ff DEF 82 0e 00 00 00 00 00 00 00 00 01 3a 00 00 00 00 CHG 82 0 ...

  • Seagate Savvio 600GB SAS - page 73

    Savvio 10K.5 SAS Product Manual, Rev. D 65 T able 14: Mode Sense values for 300GB drives MODE DATA HEADER: 01 9a 00 10 01 00 00 10 BLOCK DESCRIPTOR: 00 00 00 00 22 ec b2 5c 00 00 00 00 00 00 02 00 MODE PAGES: DEF 81 0a c0 14 ff 00 00 00 05 00 ff ff CHG 81 0a ff ff 00 00 00 00 ff 00 ff ff DEF 82 0e 00 00 00 00 00 00 00 00 01 3a 00 00 00 00 CHG 82 0e ...

  • Seagate Savvio 600GB SAS - page 74

    66 Savvio 10K.5 SAS Product Ma nual, Rev. D 12.4 Miscellaneous operating features and conditions T able 15 lists various features and cond itions. A “Y” in th e support column indicates t he featur e or condition is supported. An “N” in the support column indicates the feat ure or condition is not supported. T able 15: Miscellaneous feature ...

  • Seagate Savvio 600GB SAS - page 75

    Savvio 10K.5 SAS Product Manual, Rev. D 67 12.4.1 SAS physical interface Figure 19 shows the location of the SAS device c onnector J1. Figures 20 and 21 provide the dimensions of the SAS connector . Details of the physical, electrical, an d logical ch aracteristics are provided wi th in this section. The operational aspects of Seagate’ s SAS driv ...

  • Seagate Savvio 600GB SAS - page 76

    68 Savvio 10K.5 SAS Product Ma nual, Rev. D Figure 20. SAS d evice plug dimensions C OF DATUM B L 5.08 1.27 (6X) 1.27 (14X) 15.875 0.35MIN 15.875 33.43 0.05 B 4.90 0.08 0.84 0.05 (22X) 0.15 B P15 P1 S7 S1 SEE Detail1 0.30 0.05 (4X) 4.00 0.08 0.15 D 0.30 0.05 (2X) 41.13 0.15 B B C C A A 0.20 B 42.73 REF. C OF DATUM D L 1.10 R0.30 0.08 (4X) 2.00 (3X) ...

  • Seagate Savvio 600GB SAS - page 77

    Savvio 10K.5 SAS Product Manual, Rev. D 69 Figure 21. SAS d evice plug d imensions (detail) 6.10 Detail A 0.30 0.05 x 45 (5X) 0.40 0.05 X 45 (3X) CORING ALLOWED IN THIS AREA. 2.25 0.05 4.85 0.05 0.10 B E S14 S8 4.40 0.15 SEE Detail 2 3.90 0.15 SECTION A - A SECTION C - C A 0.35 0.05 45 R0.30 0.08 C 1.95 0.08 0.08 0.05 1.23 0.05 0.08 0.05 Detail 2 C ...

  • Seagate Savvio 600GB SAS - page 78

    70 Savvio 10K.5 SAS Product Ma nual, Rev. D 12.4.2 Physical characteristic s This section defines phys ical inter face connector . 12.4.3 Connector requirement s Contact your prefe rred connector manufacturer for mati n g part info rmation. Part numbers for SAS co nnectors will be provided in a future re vision of this publication when production p ...

  • Seagate Savvio 600GB SAS - page 79

    Savvio 10K.5 SAS Product Manual, Rev. D 71 12.4.6 SAS transmitte rs and receiv ers A typical SAS differential copper transm itter and receiver p air is shown in Figure 22. The rece iver is AC cou- pling to eliminate ground shif t noise. Figure 22. SAS transmitte rs and receivers 12.4.7 Power The drive receives power (+5 volts and +12 volts) throug ...

  • Seagate Savvio 600GB SAS - page 80

    72 Savvio 10K.5 SAS Product Ma nual, Rev. D The Ready LED Out signal is designed to pu ll down t he cath ode of an LED. The anode is att ached to the proper +3. 3 volt supply th rough an ap propriate c urrent limiting resistor . The LED and th e current limitin g resis- tor are ext ernal to the d rive. See T able 19 for the ou tput charac teristics ...

  • Seagate Savvio 600GB SAS - page 81

    Savvio 10K.5 SAS Product Manual, Rev. D 73 Index Numerics 12 volt pins 71 5 volt pins 71 6 Gbps 72 A abort task set function 55 AC coupling 71 AC power requirements 21 ACA active status 66 ACA active, faulted initiator status 66 acoustics 42 active LED Out signal 71 actuator 8 assembly desig n 6 adaptive caching 66 Admin SP 45 AES-128 data encrypti ...

  • Seagate Savvio 600GB SAS - page 82

    74 Savvio 10K.5 SAS Product Ma nual, Rev. D drive 41 drive characteristics 9 drive failure 14 Drive Locking 46 drive mounting 43 , 54 drive select 70 dual port support 56 E electrical description of co nnector 70 signal characteristics 71 specifications 20 electromagnetic compatibility 3 electromagnetic susceptibility 42 EMI requirements 3 encrypti ...

  • Seagate Savvio 600GB SAS - page 83

    Savvio 10K.5 SAS Product Manual, Rev. D 75 maximum delayed motor start 22 , 23 , 24 , 25 maximum start current 22 , 23 , 24 , 25 mean time betw een failure. See MTBF media descrip tion 7 Media Pre-Sca n 50 minimum sector interl eave 10 miscellaneous feature supp ort Adaptive caching 66 Asynchronous event notification 66 Automatic contingent allegia ...

  • Seagate Savvio 600GB SAS - page 84

    76 Savvio 10K.5 SAS Product Ma nual, Rev. D reference documents 5 relative humidity 39 reliability 8 specifications 13 reliability and service 14 repair and retu rn information 19 reporting actual retry count 66 reservation conflict status 66 resonance 39 return inform ation 19 RNG 46 RoHS 4 , 5 rotation speed 9 S safety 3 SAS interface 70 physical ...

  • Seagate Savvio 600GB SAS - page 85

    Savvio 10K.5 SAS Product Manual, Rev. D 77 W warranty 19 Z zero latency read 66 zone bit recording (ZBR) 7 ...

  • Seagate Savvio 600GB SAS - page 86

    78 Savvio 10K.5 SAS Product Ma nual, Rev. D ...

  • Seagate Savvio 600GB SAS - page 87

    ...

  • Seagate Savvio 600GB SAS - page 88

    Seagate T echnology LLC 920 Disc Drive, Scotts V alley, California 95066 -4544, USA Publication Number: 1006 28561, Rev . D. ...

Manufacturer Seagate Category Hard Drive

Documents that we receive from a manufacturer of a Seagate Savvio 600GB SAS can be divided into several groups. They are, among others:
- Seagate technical drawings
- Savvio 600GB SAS manuals
- Seagate product data sheets
- information booklets
- or energy labels Seagate Savvio 600GB SAS
All of them are important, but the most important information from the point of view of use of the device are in the user manual Seagate Savvio 600GB SAS.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Seagate Savvio 600GB SAS, service manual, brief instructions and user manuals Seagate Savvio 600GB SAS. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Seagate Savvio 600GB SAS.

A complete manual for the device Seagate Savvio 600GB SAS, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Seagate Savvio 600GB SAS by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Seagate Savvio 600GB SAS.

A complete Seagate manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Seagate Savvio 600GB SAS - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Seagate Savvio 600GB SAS, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Seagate Savvio 600GB SAS, that we can find in the current document
3. Tips how to use the basic functions of the device Seagate Savvio 600GB SAS - which should help us in our first steps of using Seagate Savvio 600GB SAS
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Seagate Savvio 600GB SAS
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Seagate Savvio 600GB SAS in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Seagate Savvio 600GB SAS?

Use the form below

If you did not solve your problem by using a manual Seagate Savvio 600GB SAS, ask a question using the form below. If a user had a similar problem with Seagate Savvio 600GB SAS it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)