English dropdown-ico

Manual Dakota Digital MCL-2004(-R)

10 pages 0.97 mb
Download

Go to site of 10

Summary
  • Dakota Digital MCL-2004(-R) - page 1

    MAN# 650304:F MODEL MCL-2004 (-R) TANK MOUNT SPEEDOMETER/TACHOM ETER Mo unting: The MCL-2004(- R) is designed to fit in the “Fat Bob” style five inch diameter dash m ount gauge openings. For all models except Deu ce NOTE: The supplied ABS m ounting ring i s not used for these applications and can be discarded The MCL-2004(- R) gauges will wo rk ...

  • Dakota Digital MCL-2004(-R) - page 2

    MAN# 650304:F • Rem ove the dash • Unclip and unplug the factory gaug e • Insure that the rubber gask et is still in the dash or rem ove from factory gauge and place back on dash • Insert new gauge from front of dash • Plug in and turn on so y ou can straighten the gauge in the dash • Use supplied L-brack ets along with the 8-32 screws ...

  • Dakota Digital MCL-2004(-R) - page 3

    MAN# 650304:F • Rem ove the dash • Unclip and unplug the factory gaug e • Rem ove the rubber gasket f rom the factory gauge bez el • Install gasket over the bezel of the Dakota Digital gauge. The gask et doesn’t cover the entire bezel, there should be som e chrom e showing when the gasket is installed • Screw the ABS mounting brack et t ...

  • Dakota Digital MCL-2004(-R) - page 4

    MAN# 650304:F Wiring The gauge is a direct plu g in on 2004 and newer bikes . The only wiring, which i s optional, i s for the indicator li ghts and auxiliary pres sure/temp gauges if you choose. POWER Constant battery pow er and key swi tched power are supplied by the stock harnes s. GROUND Ground is supplied by the stock harness. STATUS A ND WA R ...

  • Dakota Digital MCL-2004(-R) - page 5

    MAN# 650304:F SPEEDOMET ER SETUP Press and hold the switch while turning the key on and starting the engine. Once the engine i s running, release the switch. Press and release the switch to change the m enu selection. dIAG dIAG dIAG dIAG Diagnostics mo de for checking/clearing t rouble codes • Press a nd relea se the switch unti l “ dIAG ” is ...

  • Dakota Digital MCL-2004(-R) - page 6

    MAN# 650304:F TACHOMETER SETUP The digital tachom eter update rate can be adjusted between slow, mid, and fast. T he rpm warning/shift point can be adjusted from 2000 – 7500 RPM. T he bar graph color can also be changed fr om gr een with a red w arning to red with a green warning. v v v vPdAtE PdAtE PdAtE PdAtE Display update set up The display u ...

  • Dakota Digital MCL-2004(-R) - page 7

    MAN# 650304:F gEAr gEAr gEAr gEAr Gear Indicator setup This gaug e has a singl e digit displa y for gear p osition . The gaug e can l earn the gear rati os bas ed on s peed a nd rpm s o no senso rs are n eeded, j ust what you’ ve already c onnecte d. It will work with 4 , 5, 6, o r 7 spee d transm issio ns. The fa ctory pres et option will preset ...

  • Dakota Digital MCL-2004(-R) - page 8

    MAN# 650304:F RANGE RANGE RANGE RANGE Distance to Empt y setup The range re ading will initial ly show the word range u ntil a t ank of gas has been d riven to al low the gau ge to co mplete its setup based o n your drivin g. Begin with a full tank of gas an d do not refill i t until it gets below ¼ tank of gas . This ca n be do ne on multip le tr ...

  • Dakota Digital MCL-2004(-R) - page 9

    MAN# 650304:F FUNCT ION SWIT CH The f unction switch on the side of the dash panel allows access to all of the m ileage, rpm, and perf orm ance inform ation. Pressing and releasing the function switch toggles through the differ ent display s. Press and holding the switch will reset the current display. The display sequence is as follows: CLOCK > ...

  • Dakota Digital MCL-2004(-R) - page 10

    MAN# 650304:F Troubleshooting guide Problem Possible cause Solu tion Gauge will not light up. Oran ge/W hite wire does not have power. Inspect and repair stock harness. Brown/Gray w ire does not have powe r. Inspect and repair st ock harness. Black wire is not getting a good ground. Ins pect and repair stock harness. Gauge is damaged. Return gauge ...

Manufacturer Dakota Digital Category Automobile Parts

Documents that we receive from a manufacturer of a Dakota Digital MCL-2004(-R) can be divided into several groups. They are, among others:
- Dakota Digital technical drawings
- MCL-2004(-R) manuals
- Dakota Digital product data sheets
- information booklets
- or energy labels Dakota Digital MCL-2004(-R)
All of them are important, but the most important information from the point of view of use of the device are in the user manual Dakota Digital MCL-2004(-R).

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Dakota Digital MCL-2004(-R), service manual, brief instructions and user manuals Dakota Digital MCL-2004(-R). Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Dakota Digital MCL-2004(-R).

Similar manuals

A complete manual for the device Dakota Digital MCL-2004(-R), how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Dakota Digital MCL-2004(-R) by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Dakota Digital MCL-2004(-R).

A complete Dakota Digital manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Dakota Digital MCL-2004(-R) - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Dakota Digital MCL-2004(-R), FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Dakota Digital MCL-2004(-R), that we can find in the current document
3. Tips how to use the basic functions of the device Dakota Digital MCL-2004(-R) - which should help us in our first steps of using Dakota Digital MCL-2004(-R)
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Dakota Digital MCL-2004(-R)
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Dakota Digital MCL-2004(-R) in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Dakota Digital MCL-2004(-R)?

Use the form below

If you did not solve your problem by using a manual Dakota Digital MCL-2004(-R), ask a question using the form below. If a user had a similar problem with Dakota Digital MCL-2004(-R) it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)