-
Emerson EWC19T3 - page 1
COLOR TV/D VD/VCR TRIPLE COMBO EWC19T3 (19 inc h) EWC27T3 (27 inc h) O WNER’S MANU AL As an E NERGY S TAR Partner, our company has determined that this product meets the E NERGY S TAR guidelines for energy efficiency. E NERGY S TAR is a U.S. registered mark. ® ® ® If you need additional oper ating assistance after reading this owner’ s manua ...
-
Emerson EWC19T3 - page 2
1.Read instructions- All the safety and operating instructions should be read before the appliance is operated. 2.Retain Instructions- The safety and operating instructions should be retained for future reference. 3.Heed W arnings -All warnings on the appliance and in the operating instructions should be adhered to. 4.Follow Instructions- All opera ...
-
Emerson EWC19T3 - page 3
- 3 - EN 1B15 13.Outdoor Antenna gr ounding- If an outside antenna or cable system is connected to the TV/DVD/VCR, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFP A No. 70, provides information with respect to p ...
-
Emerson EWC19T3 - page 4
- 4 - EN 1B15 RADIO-TV INTERFERENCE This equipment has been tested and found to com- ply with the limits for a Class B digital device, pur- suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio fr ...
-
Emerson EWC19T3 - page 5
- 5 - EN 1C29 A V OID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE LOCA TION For safe operation and satisfactory performance of your TV/DVD/VCR, keep the following in mind when selecting a place for its installation: • Shield it from direct sunlight and keep it away from sources of intense heat. • A void dusty or humid places. • A void places wit ...
-
Emerson EWC19T3 - page 6
- 6 - EN 1C29 T ABLE OF CONTENTS C IMPORT ANT SAFEGUARDS . . .2, 3 C PRECAUTIONS . . . . . . . . . . . . . . . .4 LOCA TION . . . . . . . . . . . . . . . . . . .5 A VOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE .5 W ARNING . . . . . . . . . . . . . . . . . . . .5 SYMBOLS USED IN THIS MANUAL . . . . . . . . . . . . . . . . . . . . .5 C T ABLE OF CON ...
-
Emerson EWC19T3 - page 7
- 7 - EN 1C29 • Hi-Fi system – The Hi-Fi stereo recording system offers you excellent sound quality with a dynamic range of 80dB, frequency response from 20Hz to 20kHz, and 0.005% wow and flutter . • Rotary 4-head Record/Playbac k System – Four heads ensure excellent picture quality and special ef fects playback. • Index Sear ch – Fast- ...
-
Emerson EWC19T3 - page 8
- 8 - EN 1C29 ¡ Dolby Digital sound This player can handle Dolby Digital surround sound having 5.1 channels when connected to a Dolby Digital decoder . ¡ Still/fast/slow/step pla yback V arious playback modes are available including still pictures, fast forward/reverse, slow motion and step frames. ¡ Random playbac k f or audio CD and MP3 This p ...
-
Emerson EWC19T3 - page 9
- 9 - EN 1C29 OPERA TING CONTROLS AND FUNCTIONS 5. ST OP Button [P .37] Stops operation of the disc. 6. OPEN/CLOSE Button [DVD P .37] Press to insert discs into or remove them from the tray . 7. Disc loading tray 8. D VD Indicator Lights on during DVD mode. 9. SELECT Button Press to change to TV/VCR mode, external input mode or DVD mode. 10. TV/VCR ...
-
Emerson EWC19T3 - page 10
- 10 - EN 1C29 ANT. L AUDIO OUT R COAXIAL 1 47 46 48 49 20. A UDIO L/R input Jacks Connect to the audio output jacks of a video camera or VCR. 21. Cassette compartment 22. PICTURE Button Press to adjust the picture. 23. Number Buttons TV Mode: [P .15] Press two digits to directly access the desired channel. Remember to press a "0" before ...
-
Emerson EWC19T3 - page 11
- 11 - EN 1C29 CABLE WITH CONVERTER/ DESCRAMBLER BOX OR SA TELLITE BOX If your cable service supplies you with a converter box or if you use a satellite system, you can use the basic connection shown in the illustration. By using this connection you can also record scram- bled channels. However , channel selection must be made with the converter bo ...
-
Emerson EWC19T3 - page 12
- 12 - EN 1C29 TO RECORD A SCRAMBLED/UNSCRAM- BLED CHANNEL 1. Set the TV/DVD/VCR channel selector to the out- put channel of the Cable Converter Box or Satellite Box. (Ex. CH3) 2.Select the channel to record from your Cable Converter Box or Satellite Box. INST ALLING THE BA TTERIES 1)Open the battery compartment cover by pressing the cover on the r ...
-
Emerson EWC19T3 - page 13
- 13 - EN 1C29 CONNECTING TO A STEREO SYSTEM ANT. L AUDIO OUT R COAXIAL 1 T o Right (red) and Left (white) A UDIO OUT jacks Stereo system T o ANALOG A UDIO INPUT jacks NOTES: • Be sure to turn off the power to all components in the system before connecting another component. • Refer to the Owner's Manuals for your stereo system and any oth ...
-
Emerson EWC19T3 - page 14
- 14 - EN 1C29 ANT. L AUDIO OUT R COAXIAL 1 F ront speaker (left) Center speaker F ront speaker (right) Surround speaker (left) Surround speaker (right) Subwoof er T o DIGIT AL A UDIO OUT (PCM/BITSTREAM) COAXIAL jac k T o COAXIAL DIGIT AL A UDIO INPUT jac k Dolby Digital decoder [Fig. 8] CONNECTING T O A DOLBY DIGIT AL DECODER (for DVD) If using th ...
-
Emerson EWC19T3 - page 15
- 15 - EN 1C29 SET UP FOR USE Y ou can program the tuner to scan all the channels you receive in your area. NOTE: Channel memory programming is NOT needed when connected to a cable box or satellite box. Just select the TV/DVD/VCR channel selector to the output channel of the cable box or satellite box (Ex CH3). Then select the channel to be viewed ...
-
Emerson EWC19T3 - page 16
- 16 - EN 1C29 CHANNEL SET UP AGAIN Make sure ... • Press the POWER button to turn on the TV/DVD/VCR. 1 Select “ CHANNEL SET UP ” Press the SETUP button on the remote control. Press the Arrow button K or L to point to “ CHANNEL SET UP ” . Then, press the ENTER button. 2 Begin auto preset Press the Arrow button K or L to point to “ AUTO ...
-
Emerson EWC19T3 - page 17
- 17 - EN 1C29 CLOCK SET UP (AUTO / MANUAL) The TV/DVD/VCR clock must be set correctly before VCR timer recording is possible. It is suggested that the clock be set manually when first setting up the TV/DVD/VCR. Then, setup auto clock correction which will periodically correct the setting if necessary . NOTE: If you cannot receive a station with ti ...
-
Emerson EWC19T3 - page 18
- 18 - EN 1C29 AUTOMA TIC CLOCK SETTING Make sure ... • The TV/DVD/VCR is turned on. • Confirm the TV/DVD/VCR is receiving a RF (Radio Frequency) signal from either an antenna or cable system connection using the ANT IN jack on the rear of the TV/DVD/VCR. NOTE: • If a cable converter box is being used, make sure it is powered on. • Y ou mus ...
-
Emerson EWC19T3 - page 19
- 19 - EN 1C29 TV OPERA TION DEGAUSSING Magnetism from nearby appliances and speakers might affect the color of the TV picture. If this happens, move this TV/VCR/DVD away from the appliance. If the color is still not correct, turn off using the POWER button, then turn it on again 30 minutes or so later (27 ” model), or unplug the power cord, then ...
-
Emerson EWC19T3 - page 20
- 20 - EN 1C29 CLOSED CAPTION SYSTEM Y ou can view specially labeled (cc) TV programs, movies, news, pre-recorded tapes with either a dia- logue caption or text display . CAPTION mode: By choosing the caption mode, you can watch dramas, movies and news while captioning the dialogues and the contents of news. TEXT mode: By choosing the text mode, yo ...
-
Emerson EWC19T3 - page 21
- 21 - EN 1C29 5 Exit the V -Chip setting mode Press the SETUP button on the remote control to exit the screen. V -CHIP SET UP Make sure ... • TV/DVD/VCR is turned on. 1 Select “ V -CHIP SET UP ” Press the SETUP button on the remote control. Press the Arrow button K or L to select “ V -CHIP SET UP ” . Then, press the ENTER button. 2 Enter ...
-
Emerson EWC19T3 - page 22
- 22 - EN 1C29 CHANGING V -CHIP BLOCKED PRO- GRAMMING Note: T o change the rating, the TV must be turned to a station that is not protected. If the (PROTECTED) appears on the screen, please change the channel to a station that is not protected. 1)Follow steps [1] and [2]. 2)Press the Arrow button K or L to select "TV RA T- ING". Then, pre ...
-
Emerson EWC19T3 - page 23
- 23 - EN 1C29 MTS(Multi-Channel T elevision sound)SYSTEM Y ou can record or listen to a program in MTS stereo. CHECKING THE SELECTED MTS MODE When you play a VHS tape, or receive a broadcast on the TV/DVD/VCR tuner channel you are watching, the status shown below will appear when you press the DISPLA Y button on the remote control. PLA Y B 12:00AM ...
-
Emerson EWC19T3 - page 24
- 24 - EN 1C29 SELECTING THE MTS SYSTEM Make sure ... • TV/DVD/VCR power must be turned on. TO SELECT HIFI MODE 1 Select “ USER ’ S SET UP ” Press the SETUP button on the remote control. Press the Arrow button K or L to point to “ USER ’ S SET UP ” . Then, press the ENTER button. 2 Select “ VCR A UDIO ” Press the Arrow button K or ...
-
Emerson EWC19T3 - page 25
- 25 - EN 1C29 VIDEO CASSETTE This TV/DVD/VCR will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes. REMOVING A CASSETTE 1)In the Stop mode, press the EJECT button on the remote control or press the STOP/EJECT button on the TV/DVD/VCR. The cassette wi ...
-
Emerson EWC19T3 - page 26
- 26 - EN 1C29 PLA YBACK NORMAL PLA YBACK Make sure ... • TV/DVD/VCR power must be turned on. 1 Insert a prerecorded tape If the erase-protection tab has been removed, the TV/DVD/VCR will start playback automatically . 2 T o begin playbac k Press the PLA Y button. 3 T o stop playbac k Press the STOP button when play- back is completed. NOTES: • ...
-
Emerson EWC19T3 - page 27
- 27 - EN 1C29 SPECIAL PLA YBACK This function enables you to improve the picture quality when playing back worn cassettes such as rented tapes. 1 Select “ USER ’ S SET UP ” Press the SETUP button on the remote control. Press the Arrow button K or L to point to “ USER ’ S SET UP ” . Then, press the ENTER button. 2 Set “ RENT AL ” to ...
-
Emerson EWC19T3 - page 28
- 28 - EN 1C29 SEARCH Make sure ... • TV/DVD/VCR power must be turned on. • Insert a tape. This function allows you to search easily a beginning point that you want to review by rewinding or fast forwarding. NOTE: Zero Return WILL NOT work on a blank tape or a blank portion of a tape. 1 Stop a tape at your desired point Rewind or fast forward t ...
-
Emerson EWC19T3 - page 29
- 29 - EN 1C29 INDEX SEARCH This feature provides a method of indexing the start- ing point so that it can be easily returned to in either fast forward or rewind mode. • The index mark will be made automatically when the REC button is pressed. It will also be marked at the starting point of T imer recording and OTR. • The index mark will not be ...
-
Emerson EWC19T3 - page 30
- 30 - EN 1C29 RECORDING Make sure ... • TV/DVD/VCR power must be turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary , rewind or fast forward the tape to the point at which you want to begin recording.) NOTES: • This TV/VCR/DVD will ONL Y record and view the same channel. • This TV/VCR/DVD cannot recor ...
-
Emerson EWC19T3 - page 31
- 31 - EN 1C29 This function enables you to set a recording length simply by pressing the REC/OTR button on the TV/DVD/VCR. Make sure ... • TV/DVD/VCR power must be turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary , rewind or fast forward the tape to the point at which you want to begin recording.) NOTES ...
-
Emerson EWC19T3 - page 32
- 32 - EN 1C29 TIMER Y ou may set the TV/DVD/VCR to start and end a recording while you are away . Y ou can set 8 pro- grams to record on specific days, daily or weekly within a 1 year period. In the example below , the timer is being set to recor d: DA TE: July 4th, 2003 SETTING TIME: from 7:30PM to 8:50PM CHANNEL: CH61 T APE SPEED: SP Make sure . ...
-
Emerson EWC19T3 - page 33
- 33 - EN 1C29 T o shift the time schedule of an automatic timer recording. 1)Press the POWER button. 2)Repeat step [1] on page 32. 3)Press the RECORD button and select the desired program using the Arrow button K or L . 4)Press the RECORD button again. Each additional push will shift forward the begin/end time for recording by 10 minutes. When the ...
-
Emerson EWC19T3 - page 34
- 34 - EN 1C29 TO CHECK THE BEGIN/END TIME 1)Press the POWER button so that the RECORDING indicator goes off. 2)Press the SETUP button on the remote control. 3)Confirm “ TIMER PROGRAMMING ” is pointed. 4)Press the ENTER button. The details of programs appear on the TV screen. 5)Press the SETUP button on the remote control to return to TV mode. ...
-
Emerson EWC19T3 - page 35
- 35 - EN 1C29 ON SCREEN DISPLA Y T o check the Counter , Clock and Channel number on the TV screen, press the DISPLA Y button on the remote control. Each time you press the DISPLA Y button on the remote control, the TV screen will change as follows: When the Closed Caption mode is OFF: • Counter mode: After 5 seconds, only the counter remains. T ...
-
Emerson EWC19T3 - page 36
– 36 – EN 01A1 1 D VD SECTION ABOUT THE DISCS DISC TYPES The following discs can be played back on this TV/DVD/VCR. ¡ D VD video ¡ D VD-R/R W* ¡ D VD+R/R W* ¡ Audio CD ¡ CD-R/R W* ¡ MP3* * Depending on the types or the writing method of the medium some discs can not be played. • Some DVD-R/R W , DVD+R/R W , or CD-R/R W discs made on per ...
-
Emerson EWC19T3 - page 37
– 37 – EN 01A1 1 PLA YING A DISC BASIC PLA YBACK Getting started ¡ T urn on the power of amplifier and any other com- ponents, if necessary . 1 Press the PO WER button. ¡ The power will turn on. 2 Press the OPEN/CLOSE button to open disc loading tray . 3 Place the chosen disc in the tra y , with the label facing up. CD DVD-V 4 Press the PLA Y ...
-
Emerson EWC19T3 - page 38
– 38 – EN 01A1 1 STEP BY STEP PLA YBACK 1 During playbac k, press the P AUSE b utton. ¡ Playback will pause and sound will be muted. 2 The disc goes forwar d b y one frame each time the P A USE b utton is pressed. 3 T o exit step by step pla yback, press the PLA Y button. DVD-V RESUME 1 During playbac k, press the STOP b utton. ¡ Resume messa ...
-
Emerson EWC19T3 - page 39
– 39 – EN 01A1 1 SEARCH FUNCTION TRACK SEARCH There are three ways to begin playback on an Audio CD at a specific T rack. Using the Number buttons on the remote control 1 Press the Number buttons to enter the desired T rack number . ¡ Playback will start at the selected track. ¡ For single digit tracks (1-9), press a single number (eg. track ...
-
Emerson EWC19T3 - page 40
– 40 – EN 01A1 1 SPECIAL PLA YBACK FUNCTION REPEA T REPEA T TITLE / CHAPTER T o activate the repeat function, press the REPEA T button during playbac k. ¡ The repeat mode changes as described below every time you press the button. DVD-V REPEA T is available only during playback. CHAPTER TITLE OFF ( current chapter repeat) ( current title repea ...
-
Emerson EWC19T3 - page 41
– 41 – EN 01A1 1 PLA YING A MP3 DISC When a CD with MP3 files is in the TV/DVD/VCR, the MP3 menu will appear on the TV screen in stop mode. 1 In stop mode, press the Arro w b uttons ( K / L ) to select the desired group trac k. ¡ If a group is selected, press the Arrow B or ENTER but- ton to go on to the track selec- tion screen. Press the Arr ...
-
Emerson EWC19T3 - page 42
– 42 – EN 01A1 1 CHANGING THE SETTINGS AUDIO LANGUAGE The TV/DVD/VCR allows you to select a language during DVD disc (if multi language available) play- back. 1 Press the A UDIO button during playbac k. 2 Press the A UDIO button repeatedly to select your desired langua ge. NOTE ¡ Pressing the AUDIO button may not work on some DVDs with multipl ...
-
Emerson EWC19T3 - page 43
– 43 – EN 01A1 1 For DVD-Vs 1 Press the DISPLA Y button during playbac k to show current Chapter . ¡ The elapsed and remaining playing time of the current chapter will be displayed. 2 Press the DISPLA Y button again to show current Title. ¡ The elapsed and remaining playing time of the cur- rent title will be displayed. 3 Press the DISPLA Y b ...
-
Emerson EWC19T3 - page 44
– 44 – EN 01A1 1 CHANGING THE DVD SETUP ITEMS LANGUAGE SETTING Language options are not available with some discs. 1 Press the SETUP button twice in ST OP mode so that the D VD SETUP menu appears. ¡ If the menu does not appear , press the PLA Y button, the STOP button, then the SETUP button twice. 2 Press the Arro w button B to select CUS- T O ...
-
Emerson EWC19T3 - page 45
– 45 – EN 01A1 1 AUDIO SETTINGS Choose the appropriate Audio settings for your equip- ment as it only affect during the playback of DVD discs. 1 Press the SETUP button twice in ST OP mode so that the D VD SETUP menu appear s. ¡ If the menu does not appear , press the PLA Y button, the STOP button, then the SETUP button twice. 2 Press the Arro ...
-
Emerson EWC19T3 - page 46
– 46 – EN 01A1 1 – 46 – CONTROL LEVELS ¡ ALL All parental lock is cancelled. ¡ Level 8 DVD software of any grade (adult/general/children) can be played back. ¡ Levels 7 to 2 Only DVD software intended for general use and children can be played back. ¡ Level 1 Only DVD software intended for children can be played back, with those intende ...
-
Emerson EWC19T3 - page 47
– 47 – EN 01A1 1 Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked possibilities. Before arranging for service, check these items. It could save your time and money . TV/VCR Mode TROUBLESHOOTING GUIDE PROBLEM CORRECTIVE ACTION No picture and sound. • Make sure the AC cord is connected to ...
-
Emerson EWC19T3 - page 48
– 48 – EN 01A1 1 CLOSED CAPTION PROBLEM POSSIBLE REMEDY My TV/DVD/VCR is showing • Y ou are watching a live broadcast and spelling errors made by the captions that are misspelled. • closed captioning production company may pass through uncorrected. • A prerecorded program will not show any misspelled words because • of the normal time a ...
-
Emerson EWC19T3 - page 49
– 49 – EN 01A1 1 NOTES: • Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner ’ s Manual for details on correct operations. • Playback from a desired track and random playback are not available during program playback. PROBLEM CORRECTIVE ACTION No picture. • Connect the v ...
-
Emerson EWC19T3 - page 50
– 50 – EN 01A1 1 EN 01A1 1 CABINET CLEANING • W ipe the front panel and other exterior surfaces of the TV/DVD/VCR with a soft cloth immersed in lukewarm water and wrung dry . • Never use a solvent or alcohol. Do not spray insec- ticide liquid near the TV/DVD/VCR. Such chemi- cals may cause damage and discoloration to the exposed surfaces. A ...
-
Emerson EWC19T3 - page 51
– 51 – EN 01A1 1 CR T [19 inch model] : 19 inch in-line gun, 90 ˚ deflection tube [27 inch model] : 27 inch in-line gun, 110 ˚ deflection tube T elevision system : NTSC-M Closed caption system : § 15.1 19/FCC V ideo Heads : Rotary four-head T ape width : 1/2 inch T ape speed SP : 33.40mm/sec. LP : 16.67mm/sec. SLP : 1 1.12mm/sec. T uner chan ...
-
Emerson EWC19T3 - page 52
– 52 – ES 0C28 INDICE ■ CONTROLES DE OPERACIÓN Y FUNCIONES . . . . . 52 P ANEL FRONT AL DEL TELEVISOR/DVD . . . . . . . . . . 52 MANDO A DIST ANCIA . . . . . . . . . . . . . . . . . . . . . . . . . 52 VIST A POSTERIOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 ■ PREP ARACI Ó N P ARA LA UTILIZACI Ó N . . . . . . . . . . 53 ...
-
Emerson EWC19T3 - page 53
– 53 – ES 0C28 30. Bot ó n CLEAR Para cancelar ajustes. 31. Bot ó n MODE Activa el modo de reproducci ó n programada o el modo de reproducci ó n aleatoria. 32. Bot ó n SEARCH MODE Presione este bot ó n para localizar un punto deseado. 33. Bot ó n A UDIO Presione este bot ó n para seleccionar un idioma de audio o el modo de sonido desead ...
-
Emerson EWC19T3 - page 54
SECCIÓN DE TV/VCR – 54 – ES 0C28 MODO DE ENTRADA EXTERNA Al usar una se ñ al de entrada externa (otra videograbado- ra o una videoc á mara), conecte los cables de salida de audio/v í deo del equipo externo a las tomas AUDIO L/R IN/ VIDEO IN de su televisor/DVD/videograbadora. Luego, presione los botones CHANNEL K / L hasta que aparezca &quo ...
-
Emerson EWC19T3 - page 55
– 55 – ES 0C28 C Ó MO BORRAR (AGREGAR) CANALES 2 Seleccione “ A GREGAR/BORRAR ” Presione el bot ó n de flecha K o L para se ñ alar “ AGREGAR/BORRAR ” . Presione el bot ó n ENTER. 3 Introduzca el n ú mero del canal deseado Presione el bot ó n de flecha K o L hasta que aparez- ca el n ú mero del canal deseado. (T ambi é n puede ut ...
-
Emerson EWC19T3 - page 56
Printed in Malaysia 0EMN02182 TD853UD/TD953UD ★★★★★ LIMITED W ARRANTY FUNAI CORP . will repair this Emerson product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURA TION: P ARTS: FUNAI CORP . will provide parts to replace defective parts without charge for one (1) year from the date of origina ...
Do you have a question concerning Emerson EWC19T3?
Use the form below
If you did not solve your problem by using a manual Emerson EWC19T3, ask a question using the form below. If a user had a similar problem with Emerson EWC19T3 it is likely that he will want to share the way to solve it.