English dropdown-ico

Manual Olympus FL-50

11 pages 0.28 mb
Download

Go to site of 11

Summary
  • Olympus FL-50 - page 1

    8/6/2006 1 Camera Housing – Model FL - 50 ( Olympus ) User Manual Contents: 1. Introduction 2. Specification s 3. Function Controls 4 . Set up Instructions 5. Use & Care of Housing 6. Service 7. Warranty ...

  • Olympus FL-50 - page 2

    8/6/2006 2 1. Introduction 10 BAR Underwater Housings are small, light and rugged enough to be used on every dive. Use of a clear polycarbonate allows for visual inspection of camera condition and the O - ring seal. 10 BAR Housings are designed for the ever - increasing variety of models of digital still and video cameras. Advanced computer aided d ...

  • Olympus FL-50 - page 3

    8/6/2006 3 3. Function Controls FL - 50 4. Set up Instructions 4 .1 Air Lock: The body and lid are designed with the Air Lock system “no clip” closure arrangement. Testing has shown that this arrang ement allow the water to exert an even pressure on the O - ring, increasing the reliability of the watertight seal. 4.2 Pressure release plug To op ...

  • Olympus FL-50 - page 4

    8/6/2006 4 4.3 Opening levers: After unscrewing and pulling out the pressure rel ease plug, the lid can be opened. To overcome the friction of opening, use le ver (Fig. 2 ) to push against the lid with a cam action. Be sure they are inserted all the way flat to the housing before turning to avoid damaging the protrusions on the lid . The body has f ...

  • Olympus FL-50 - page 5

    8/6/2006 5 4.5 Maintaining the O - ring Seal: If the main body to lid O - ring is not installed, install the O - ring before diving. This is the only user serviceable O - ring. Its care and maintenance is critical to the watertight integrity of the housing. The O - ring sh ould be replaced at the service interval (see section on service). If the O ...

  • Olympus FL-50 - page 6

    8/6/2006 6 ring can be obtained from 10 BAR. If the O - ring is contaminated or suspected of being contaminated, clean it with a cotton cloth that is fr ee of all chemicals or contamination. After cleaning inspect the O - ring again. • Once the O - ring has been inspected and verified fit for use, apply a SMALL amount of silicone grease to the O ...

  • Olympus FL-50 - page 7

    8/6/2006 7 (Fig. 7) Screw home the pressure release plug (Fig. 7) . There is no need to excessively tighten this plug. The seal is made by internal O - rings. The O - ring on the underside of the plug is just to keep out dirt. After replacing the lid, make a final visual inspection of the main O - ring for contamination (Fig. 8) (Fig. 8) Note: If t ...

  • Olympus FL-50 - page 8

    8/6/2006 8 5. Use & Care of Housing: 5.1 Pre Dive Function Check. Just before entering the water, make a habit of reviewing that you have carried out the prope r steps to close the housing. and the pressure release plug screwed home. Make a visual check of the O - ring seal. It is also useful to switch on the camera, and check that controls e.g ...

  • Olympus FL-50 - page 9

    8/6/2006 9 It is good practice to rinse off your housing with fresh water after every dive. A void exposure to fine sand. After a series of 10 or more dives, e.g. after a dive holiday, it is recommended to immerse the housing for 2 - 3 hours in warm water to dissolve any salt deposits that may have built up. No chemical cleaners should be used. Mil ...

  • Olympus FL-50 - page 10

    8/6/2006 10 7. Warranty The warranty is valid within two years from the date of first purchase. The warranty applies only to the housing itself. 10 BAR does not accept any liability either implicit or otherwise for any equipment housed insid e, or used together with the housing. In the event of the housing flooding within the period of warranty, 10 ...

  • Olympus FL-50 - page 11

    8/6/2006 11 (Copy to be returned to 10 Bar Underwater Housin gs) The warranty is valid within two years from the date of first purchase. The warranty applies only to the housing itself. 10 BAR does not accept any liability either implicit or otherwise for any equipment housed inside, or used together with the housi ng. In the event of the housing f ...

Manufacturer Olympus Category Camera Accessories

Documents that we receive from a manufacturer of a Olympus FL-50 can be divided into several groups. They are, among others:
- Olympus technical drawings
- FL-50 manuals
- Olympus product data sheets
- information booklets
- or energy labels Olympus FL-50
All of them are important, but the most important information from the point of view of use of the device are in the user manual Olympus FL-50.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Olympus FL-50, service manual, brief instructions and user manuals Olympus FL-50. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Olympus FL-50.

Similar manuals

A complete manual for the device Olympus FL-50, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Olympus FL-50 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Olympus FL-50.

A complete Olympus manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Olympus FL-50 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Olympus FL-50, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Olympus FL-50, that we can find in the current document
3. Tips how to use the basic functions of the device Olympus FL-50 - which should help us in our first steps of using Olympus FL-50
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Olympus FL-50
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Olympus FL-50 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Olympus FL-50?

Use the form below

If you did not solve your problem by using a manual Olympus FL-50, ask a question using the form below. If a user had a similar problem with Olympus FL-50 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)