English dropdown-ico

Manual York SUNLINE 2000 B2CH180

16 pages 0.62 mb
Download

Go to site of 16

Summary
  • York SUNLINE 2000 B2CH180 - page 1

    GENERAL YORK Model B*CH units are single package heat pump s designed for outdoor installation on a roof top or a slab. These units can be equipped with factory installed electric heaters for supplemental heating applications. The units are completely assembled on rigid, permanently attached base rails. All piping, refrigerant charge, and electrica ...

  • York SUNLINE 2000 B2CH180 - page 2

    035-18895-000-A-0902 2 Unitary Products Group General ................................................................................ 1 Inspection ............................................................................ 1 Reference ............................................................................ 1 Nomenclature ..................... ...

  • York SUNLINE 2000 B2CH180 - page 3

    LIMIT ATIONS These units must be installed in accordance with applicable national and local or municipal safety codes. Refer to T able 1 for Unit Application Dat a and to T able 2 for Electric Heat Application Data. If components are to be added to a unit to meet local codes, they are to be installed at the dealer's and/or the customer's ...

  • York SUNLINE 2000 B2CH180 - page 4

    FIXED OUTDOOR AIR INT AKE DAMPER This damper assembly is shipped inside the return air compartment. It is completely assembled and ready for installation. A damper baffle inside the hood is adjustable to provide variable amounts of outdoor air int ake on units that are not provided with an economizer or motorized damper option. Refer to Figure 3. G ...

  • York SUNLINE 2000 B2CH180 - page 5

    insulated wires 1.0mm 2 (#18 A WG) should be used to connect thermostat to unit. Eight conductors are required. The subbase on the low voltage thermostat includes an “Emergency Heat ” position on the system switch and a pilot light. In the “Emergency Heat” position, the thermostat provides electric resistance heat only . The compressors wil ...

  • York SUNLINE 2000 B2CH180 - page 6

    035-18895-000-A-0902 6 Unitary Products Group These heaters are located within the central compartment of the unit with the heater elements extending into the supply air chamber . Refer to Figure 7 for access panel location. Fuses are supplied, where required, by the factory . Some KW sizes require fuses and others do not. Refer to T able 2 for min ...

  • York SUNLINE 2000 B2CH180 - page 7

    035-18895-000-A-0902 Unitary Products Group 7 WEIGHTS (kg. / lbs.) BASIC UNIT 180 948 / 2091 OPTIONS Economizer 73 / 160 Motorized Damper 68 / 150 Electric Heater 18 kW 1 1 / 25 36kW 14 / 30 54 kW 16 / 35 72 kW 18 / 40 ACCESSORIES Roof Curb 180 79 / 175 Barometric Damper 20 / 45 Wood Skid* 180 91 / 200 * Allows handling of unit using 2286mm (90&quo ...

  • York SUNLINE 2000 B2CH180 - page 8

    035-18895-000-A-0902 8 Unitary Products Group FIG . 7 - DIMENSIONS AND CLEARANCES All dimensions are in millimeters and inches, unless otherwise specified. They are subject to change without notice. Certified dimen - sions will be provided upon request. CLEARANCES (mm / in.) Front 914 / 36 Back 610 / 24 (Less Economizer) 1245 / 49 (With Economizer) ...

  • York SUNLINE 2000 B2CH180 - page 9

    035-18895-000-A-0902 Unitary Products Group 9 FIG . 7 (Cont'd.) - DIMENSIONS AND CLEARANCES DET AIL “X” ACCESSOR Y SIDE SUPPL Y AND RETURN AIR DUCT OPENINGS DUCT COVERS - Units are shipped with all air duct openings covered. For sideflow duct applications; 1.Remove and discard the side supply and return air duct covers. 2.Connect ductwork ...

  • York SUNLINE 2000 B2CH180 - page 10

    035-18895-000-A-0902 10 Unitary Products Group T ABLE 4 - SUPPL Y AIR BLOWER PERFORMANCE BLOWER SPEED, RPM MOTOR PULLEY (TURNS OPEN)* AIRFLOW 1.77 m 3 /s 2.07 m 3 /s 2.36 m 3 /s 2.66 m 3 /s 2.95 m 3 /s ESP (Pa) Output (kW) Input (kW) ESP (Pa) Output (kW) Input (kW) ESP (Pa) Output (kW) Input (kW) ESP (Pa) Output (kW) Input (kW) ESP (Pa) Output (kW) ...

  • York SUNLINE 2000 B2CH180 - page 11

    035-18895-000-A-0902 Unitary Products Group 11 DESCRIPTION EXTERNAL ST A TIC PRESSURE DROP - RESIST ANCE, iwg/Pa m 3 /s (CFM) 180 UNIT 1.77 (3750) 2.12 (4500) 2.48 (5250) 2.83 (6000) WET COIL 0.1 / 25 0.1 / 25 0.1 / 25 0.1 / 25 ELECTRIC HEA T OPTIONS 18 kW 0.1 / 25 0.1 / 25 0.1 / 25 0.1 / 25 36 kW 0.1 / 25 0.1 / 25 0.2 / 50 0.2 / 50 54 kW 0.1 / 25 ...

  • York SUNLINE 2000 B2CH180 - page 12

    COOLING SYSTEM The cooling section is a complete factory package utilizing an air-cooled condenser . The system is factory-charged with Refrigerant-22. The compressors are hermetically sealed, internally sprung and base-mounted with rubber-insulated hold-down bolts. The compressors also have inherent (internal) protection. If there is an abnormal t ...

  • York SUNLINE 2000 B2CH180 - page 13

    HEA T ANTICIP ATOR SETPOINT It is important that the anticipator setpoint be correct. T oo high a setting results in longer heat cycles and a greater temperature swing in the conditioned space. Reducing the value below the correct setpoint causes shorter “ON” cycles and may result in the lowering of the temperature within the conditioned space. ...

  • York SUNLINE 2000 B2CH180 - page 14

    DEFROST SEQUENCE OF OPERATION These heat pumps have a unique “ambient modified” time- temperature defrost control that automatically adjusts to changes in the outdoor temperature. The defrost control shortens the defrost initiation time periods above 2°C (35°F) and extends the defrost initiation time periods below 2°C (35°F . The control is ...

  • York SUNLINE 2000 B2CH180 - page 15

    035-18895-000-A-0902 Unitary Products Group 15 SECURE OWNER'S APPROV AL : When the system is functioning properly , secure the owner's approval. Show him the location of all disconnect switches and the thermostat. T each him how to start and stop the unit and how to adjust temperature settings within the limitations of the system. FIG . 1 ...

  • York SUNLINE 2000 B2CH180 - page 16

    035-18895-000-A-0902 5005 Y ork Drive, Norman Oklahoma 73069 Subject to change without notice. Printed in U.S.A Copyright  by Y ork International Corporation 2002. All Rights Reserved. ...

Manufacturer York Category Heat Pump

Documents that we receive from a manufacturer of a York SUNLINE 2000 B2CH180 can be divided into several groups. They are, among others:
- York technical drawings
- SUNLINE 2000 B2CH180 manuals
- York product data sheets
- information booklets
- or energy labels York SUNLINE 2000 B2CH180
All of them are important, but the most important information from the point of view of use of the device are in the user manual York SUNLINE 2000 B2CH180.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals York SUNLINE 2000 B2CH180, service manual, brief instructions and user manuals York SUNLINE 2000 B2CH180. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product York SUNLINE 2000 B2CH180.

Similar manuals

A complete manual for the device York SUNLINE 2000 B2CH180, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use York SUNLINE 2000 B2CH180 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of York SUNLINE 2000 B2CH180.

A complete York manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual York SUNLINE 2000 B2CH180 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the York SUNLINE 2000 B2CH180, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the York SUNLINE 2000 B2CH180, that we can find in the current document
3. Tips how to use the basic functions of the device York SUNLINE 2000 B2CH180 - which should help us in our first steps of using York SUNLINE 2000 B2CH180
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with York SUNLINE 2000 B2CH180
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of York SUNLINE 2000 B2CH180 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning York SUNLINE 2000 B2CH180?

Use the form below

If you did not solve your problem by using a manual York SUNLINE 2000 B2CH180, ask a question using the form below. If a user had a similar problem with York SUNLINE 2000 B2CH180 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)