-
Philips SWW1810 - page 1
Register your pr oduct and get support at www .philips.com/w elcome SWW1810 EN User manual 3 ...
-
Philips SWW1810 - page 2
...
-
Philips SWW1810 - page 3
3 English Contents 1 Important 4 Safety 4 2 Y our Wireless HD A V Connect 6 What is in the box 6 3 Overview 7 The transmitter 7 The receiver 7 The remote control 8 4 Installation 9 Connect the transmitter to your HD devices 9 Connect the receiver to the HDTV set 9 Connect the IR blaster and IR sensor extender cables 10 Install remote control batter ...
-
Philips SWW1810 - page 4
4 e Do not use this apparatus near water . f Clean only with dr y cloth. g Do not block an y ventilation openings. Install in accordance with the manufacturer’ s instr uctions. h Do not install near any heat sources such as radiator s, heat register s, stov es, or other apparatus (including amplier s) that produce heat. i Do not defeat the saf ...
-
Philips SWW1810 - page 5
5 English n Refer all ser vicing to qualied ser vice per sonnel. Ser vicing is required when the apparatus has been damaged in any way , such as power -supply cord or plug is damaged, liquid has been spilled or objects hav e fallen into the apparatus, the apparatus has been exposed to r ain or moisture , does not operate nor mally , or has been ...
-
Philips SWW1810 - page 6
6 HDMI cable IR blaster extender cab le P ow er adapter for the transmitter and receiver x 2 IR sensor extender cable Anchor s x 2 Screws x 2 Quick Installation Guide Adhesive tape x 2 Quick star t guide User manual 2 Y our Wir eless HD A V Connect Congratulations on your purchase and welcome to Philips! T o fully benet from the suppor t that Ph ...
-
Philips SWW1810 - page 7
7 English The r eceiver T op view 1 Source LEDs Indicator s for HDMI1 and HDMI2 2 P ower button with the LED indicator Press to turn the receiver on/off. 3 Source button Press to select the source input. Rear view 1 DC IN jack Connect the pow er adapter of the receiver . 2 HDMI OUT adapter Connect the HDTV with an HDMI cable. 3 IR IN jack Plug in t ...
-
Philips SWW1810 - page 8
8 The r emote control 1 PO WER button Press to turn the transmitter and receiver on/off. 2 INFO button Displays on the HDTV the connection status of the receiver . 3 IR button Press to switch the IR blaster frequency to meet the requirement of the source device . 4 SOURCE button Press to switch the audio/video source inputs connected to the transmi ...
-
Philips SWW1810 - page 9
9 English 2 Connect the supplied pow er adapter to the transmitter . • Connect one end of the pow er adapter to the DC IN jack of the transmitter . • Connect the other end of the pow er adapter to a pow er outlet. » The pow er button of the tr ansmitter is lit in solid blue and turns red in standby mode. Connect the r eceiver to the HDTV set D ...
-
Philips SWW1810 - page 10
10 5 Extend and stick the IR sensor extender cable onto the front side of y our HDTV . Note • The IR blaster suppor t 47KHz remote signal protocol, while the IR sensor suppor ts 36KHz - 56KHz (NEC, RC5, RC6) remote signal protocol. Install r emote control batteries Caution • Risk of explosion! Keep batteries away from heat, sunshine or re. N ...
-
Philips SWW1810 - page 11
11 English On screen displa y on HDTV On screen displa y Mode and status S tandby mode: it is a power - saving mode ..... Star t up in progress: It takes 15- 20 seconds. x and .... Searching a vailable channels: It occur s when the link cannot establish o ver 80 seconds after initialization. HDMI CH1 On mode with unrecognized video format HDMI CH1 ...
-
Philips SWW1810 - page 12
12 Select the sour ce on the transmitter Press the source buttons on the remote control, transmitter or receiver until you see the availab le video from your device. Tip • For information on the LED indicator status, see the section on ‘LED indicator status of the transmitter’. LED indicator status of the transmitter and receiv er Po wer LED ...
-
Philips SWW1810 - page 13
13 English 5 Hook the key holes at the back of the receiver on the screws. 6 Mount y our r eceiv er Y ou can either mount the receiver on the wall or on the back of the HDTV . Mount y our receiv er on the wall 1 Select a spot near the HDTV . 2 Drill two holes in the wall. Make sure that the distance between the tw o holes is 1 25 / 32 ” (45 mm) a ...
-
Philips SWW1810 - page 14
14 6 Align the adhesive tape on the receiv er with the one on the HDTV until both the receiver and HDTV are mounted together rmly . Note • The use of adhesive tapes is an alternative mounting option when the receiver cannot be x ed. • When you mount the receiver at the back of the HDTV , avoid blocking the v entilation holes of the HDTV . ...
-
Philips SWW1810 - page 15
15 English Po wer supply: Input: A C 100~ 240V Output: DC 5V , 2A Operating temperature: 0~40°C/32~104°F T ransmitter interfaces A/V interfaces HDMI input: T wo (T ype A) Control signal interfaces IR blaster extender : 2.5mm jack Po wer interface P ow er input: 5V DC jack Switches T op power switch: One T op source switch: One LEDs P ow er LED: 1 ...
-
Philips SWW1810 - page 16
16 IMPOR T ANT NO TE: Radiation Exposure Statement: • This equipment complies with FCC radiation exposure limits set for th for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm betw een the radiator & your body . • This transmitter must not be co-located or operating in conjunction with ...
-
Philips SWW1810 - page 17
17 English negative consequences on the en vironment and human health. Please visit www .recycle .philips.com for additional information on a recycling center in your area. HDMI, and HDMI logo, and High-Denition Multimedia Interface are trademar ks or registered trademar ks of HDMI licensing LLC in the United States and other countries. One Y ea ...
-
Philips SWW1810 - page 18
18 9 Fr equently ask ed question The pow er LED on the receiv er is not lit up in red in standby mode. • Make sure that there is po wer supply for the transmitter and receiver . The computer screen image is not full screen on m y TV . 1 Right-click on an open space on y our desktop. 2 Select Gra phics Options > Output to > Digital T elevisi ...
-
Philips SWW1810 - page 19
19 English If the picture quality is poor , what do I do? • Make sure that the video resolution of y our source device matches the resolution of your HDTV . • Make sure that the transmission r ange between receiver and transmitter is not over 65 feet (19.7 meters) tr ansmission distance . Tip • For information, see the chapter on ‘T echnica ...
-
Philips SWW1810 - page 20
20 EN ...
-
Philips SWW1810 - page 21
21 ...
-
Philips SWW1810 - page 22
© 2011 K oninklijke Philips Electr onics N.V . All rights reserved. IFU_SWW1810_EN_V2.0 WK11485 ...
Do you have a question concerning Philips SWW1810?
Use the form below
If you did not solve your problem by using a manual Philips SWW1810, ask a question using the form below. If a user had a similar problem with Philips SWW1810 it is likely that he will want to share the way to solve it.