English dropdown-ico

Manual Tyco Electronics MM23016

102 pages 2.48 mb
Download

Go to site of 102

Summary
  • Tyco Electronics MM23016 - page 1

    Operator’s Manual MM23016 Rev. C, Apr/08 M/A-COM M7200 Series Digital Mobile Radio ...

  • Tyco Electronics MM23016 - page 2

    MM23016, Rev. C 2 MANUAL RE VISION HISTOR Y REV DATE REASON FOR CHANGE - Nov/06 Initial Release. A Jun/07 Included EDA CS, Conve ntional, a nd P2 5 operation and updated OpenSky op eration. B Sep/07 Included MPE informa tion for motorcycle insta llations and add ed antennas to Table 2-1 pe r RG-AN-0251XX . C Apr/08 Updated O penSky oper ation inf o ...

  • Tyco Electronics MM23016 - page 3

    MM23016, Rev. C 3 TABLE OF CONTENTS Page 1 SAFETY SYMBOL CONVENTION .................................................................................................... 9 2 RF ENERGY EXPOSURE INFORMATION ................................................................................... 10 2.1 RF ENERGY EXPOSURE AWARENESS, CONTROL INFORMATION, AND ...

  • Tyco Electronics MM23016 - page 4

    MM23016, Rev. C 4 TABLE OF CONTENTS Page 7.17 ADJUSTING DISPLAY AND BUTTON BACKLIGHT BRIGHTNESS ................................. 28 7.18 STEALTH MODE ................................................................................................................... ... 28 7.18.1 Enabling Stealth Mode ............................................... ...

  • Tyco Electronics MM23016 - page 5

    MM23016, Rev. C 5 TABLE OF CONTENTS Page 8.4 DIRECT ACCESS .................................................................................................................. .... 46 8.5 FEATURE ENCRYPTION DISPLAY ....................................................................................... 46 8.5.1 Serial Number ROM (12 Hex Digits) ...... ...

  • Tyco Electronics MM23016 - page 6

    MM23016, Rev. C 6 TABLE OF CONTENTS Page 9.11.3 Sending an Individual Call ............................................................................................ 68 9.12 SCAT OPERATION ................................................................................................................. .. 68 9.13 TELEPHONE INTERCONNECT CALLS...... ...

  • Tyco Electronics MM23016 - page 7

    MM23016, Rev. C 7 TABLE OF CONTENTS Page 11.1 RADIO STATUS ICONS ........................................................................................................... 85 11.2 MESSAGES ................................................................................................................................ 86 11.3 ALERT TONES ........... ...

  • Tyco Electronics MM23016 - page 8

    MM23016, Rev. C 8 TABLE OF CONTENTS Page FIGURES Figure 7-1: System Model ....................................................................................................... ................ 18 Figure 7-2: Scan Model ......................................................................................................... .................. 18 F ...

  • Tyco Electronics MM23016 - page 9

    MM23016, Rev. C 9 1 SAFETY SYMBOL CONVENTION The following conventions are used throughout this ma nual to alert the user to general safety precautions that must be observed during all phases of operation, servi ce, and repair of this product. Failure to comply with these precautions or with specific warnings else where in this manual violates safe ...

  • Tyco Electronics MM23016 - page 10

    MM23016, Rev. C 10 2 RF ENERGY EXPOSURE INFORMATION 2.1 RF ENERGY EXPOSURE AWARENE SS, CONTROL INFORMATION, AND OPERATION INSTRUCTIONS FOR FCC OCCUPATIONAL USE REQUIREMENTS Before using your mobile two-way radio, read th is important RF energy awareness and control information and operational instructions to ensure compliance with th e FCC’s RF e ...

  • Tyco Electronics MM23016 - page 11

    MM23016, Rev. C 11 2.2 COMPLIANCE WITH RF EXPOSURE STANDARDS Your MA/COM, Inc. M7200 mobile two-way radio is d esigned and tested to comply with a number of national and international standard s and guideline s (listed below) regarding human exposure to RF electromagnetic energy. This radio complies with the IEEE and ICNIRP exposure limits for occu ...

  • Tyco Electronics MM23016 - page 12

    MM23016, Rev. C 12 Install the radio’s antenna (refer to Table 2-1 for applicable antenna part numbers) in the center of the vehicle’s roof. These mobile antenna installation guidelines are limited to metal body motor vehicles or vehicles with appropriate ground planes. The antenn a installation should additionally be in accordance with the fol ...

  • Tyco Electronics MM23016 - page 13

    MM23016, Rev. C 13 2.2.3 Approved Accessories This radio has been tested and meets the FCC RF guidelines when used with the M/A-COM accessories supplied or designated for use with this product. U se of other accessories may not ensure compliance with the FCC’s RF exposure guidelines, and may violate FCC regulations. For a list of M/A-COM approved ...

  • Tyco Electronics MM23016 - page 14

    MM23016, Rev. C 14 3 OPERATION SAFETY RECOMMENDATIONS 3.1 TRANSMITTER HAZARDS The operator of any mobile radio should be aware of c ertain hazards common to the operation of vehicular radio transmitters. A list of several possible hazards is given: • Explosive Atmospheres – Just as it is dangerous to fuel a ve hicl e with the motor running, sim ...

  • Tyco Electronics MM23016 - page 15

    MM23016, Rev. C 15 4 OPERATING RULES AND REGULATIONS Two-way FM radio systems must be operated in accord ance with the rules and regulations of the loc al, regional, or national government. In the United States, the M7200 mobile radio must be operated in accordance with the rules and regulations of the Federal Communications Commission (FCC). As an ...

  • Tyco Electronics MM23016 - page 16

    MM23016, Rev. C 16 5 PRODUCT DESCRIPTION The M7200 mobile is a state-of-the-art radio th at operates seamlessly betwee n the 800 MHz frequency band and the 700 MHz frequency band. The M7 200 is designed to meet the critical communications demands of public service users and comp lies with MIL-STD-810F specifications. The M7200 is capable of support ...

  • Tyco Electronics MM23016 - page 17

    MM23016, Rev. C 17 6 CHANGE OPERATING MODE 6.1 CHANGE FROM OTP MODE To change from OTP operating mode to P25, EDACS, or Con ventional: 1. Use to cycle through the menu until the “Mode Menu” appears in the bottom line of the display. 2. Use to choose an available mode. Press MENU an d confirm (Y/N) with and press MENU again. 3. Press the MENU bu ...

  • Tyco Electronics MM23016 - page 18

    MM23016, Rev. C 18 7 OPENSKY OPERATION 7.1 CH721 FRONT PANEL COMPONENTS The front panel of the control head includes a dot matrix display, controls for menu navigation, an emergency button, three pre-set buttons, a Po wer On-Off/Volume Control knob, and a microphone connector. In addition, the system model control head features a DTMF keypad. Table ...

  • Tyco Electronics MM23016 - page 19

    MM23016, Rev. C 19 The buttons on the front panel are backlit for operati on in a low ambient light level such as nighttime operation. Some buttons also flash to provide feedback of various o perating conditions. In addition, the front panel contains a light-level sen sor that samples ambient light levels for automatic display and button backlight ...

  • Tyco Electronics MM23016 - page 20

    MM23016, Rev. C 20 2. Wait for the power-up sequence to complete, which takes approximately ten (10) seconds. During this time, if enabled for auto registration, t h e radio is provisioned with a customized user personality designed for the user’s specific n eeds by the OpenSky network administrator. If this personality contains encrypte d talk g ...

  • Tyco Electronics MM23016 - page 21

    MM23016, Rev. C 21 7.5 LOG OFF THE NETWORK The *0## command de-registers the radio. Typically, this is automatically performed when powering down the radio. Using this method, the User ID is remembered by the radi o so only the password is needed at next login. Manually log o ff by pressing *0## (requires System Model). If a user is logged in using ...

  • Tyco Electronics MM23016 - page 22

    MM23016, Rev. C 22 7.8 RADIO STATUS ICONS Status Icons indicate the various operating characteris tics of the radio. The icons show operating modes and conditions (see Table 7-2). The location of icons on the display may vary depending on configuration. Table 7-2: Icons and Descriptions ICON DESCRIPTION Indicates data registration. Volume bars – ...

  • Tyco Electronics MM23016 - page 23

    MM23016, Rev. C 23 TG a TG b TG c TG x TG y TG z TG d TG e TG f TG a TG d TG g TG h TG i TG = Talk Gr oup Profile 1 Profile 2 Profile 3 Figure 7-4: Personality Structure Example If Global Profile is enabled by the system ad ministrator, the number of available talk groups to scan doubles. 7.10.2 Talk Groups A talk group represents a set of users th ...

  • Tyco Electronics MM23016 - page 24

    MM23016, Rev. C 24 7.11 ALERT TONES The M7200 radio also provides audible Alert Ton es or “beeps” to indicate the various operating conditions (see Table 7-3). Table 7-3: M 7200 OpenSky Mode Alert Tones NAME TONE DESCRIPTION Call Queued one low tone/two hi gh tones Call queued for processing. Call Denied three short beeps Radio is out of covera ...

  • Tyco Electronics MM23016 - page 25

    MM23016, Rev. C 25 Table 7-4: Basic Menu Structure Menu Name Radio Displa ys (top and bot tom lines) Usage Notes To/From Dwell Display registration , RF s ync and transceiver st at us codes Engineering Display (Menu may not be available per radio programming.) bit-erro r rates and RSSI data Displays radio system connection data . For engineering us ...

  • Tyco Electronics MM23016 - page 26

    MM23016, Rev. C 26 Menu Name Radio Displa ys (top and bot tom lines) Usage Notes See Previous Page current scan mode Scan Mode “ ScnModeMenu ” Use to turn Scan on and off. Press MENU to retu rn to dwell displa y. talk group “<” Talk group Lock Out “ LockOutMenu ” Use to choose a talk group for locking/unlocking. Press MENU to toggle ...

  • Tyco Electronics MM23016 - page 27

    MM23016, Rev. C 27 7.13 DUAL-TONE MULTI-FREQUENCY Dual-Tone Multi-Frequency (DTMF) is the system used by touch-tone telephones. DTMF assigns a specific tone frequency to each key so a microprocessor can easily identify its activation. The radio supports DTMF with a system model control head ( Figure 7-1). This allows for specific tasks such as ente ...

  • Tyco Electronics MM23016 - page 28

    MM23016, Rev. C 28 7.14.2 DTMF Overdial Using the keypad on a System Model, the ra dio can transmit DTMF tones corresponding to numbers/characters 0 — 9, * and # on the keypad. To overdial numbers/characters, trans mit by pressing and holding the PTT butto n and then, press the corre sponding ke ys (one at a time) on the keypad. 7.15 CHANGING THE ...

  • Tyco Electronics MM23016 - page 29

    MM23016, Rev. C 29 When stealth mode is on, the radio continues to scan the programmed list of talk groups and the user can key-up on the selected talk group. 7.18.1 Enabling Stealth Mode 1. Using , scroll through the menu until “StealthMenu” appears. 2. To immediately turn Stealth Mode on, press ( + ) or ( - ) with . 3. To turn Stealth Mode of ...

  • Tyco Electronics MM23016 - page 30

    MM23016, Rev. C 30 7.21 RECEIVING AND TRANSM ITTING VOICE CALLS As soon as the radio completes the startup/login/ provision/self-test sequence and registers on the OpenSky network, voice calls from talk groups in the active profile will be audible. 7.21.1 Receiving a Voice Call No action is required to receive a voice call. The di splay responds to ...

  • Tyco Electronics MM23016 - page 31

    MM23016, Rev. C 31 7.23 INTERCOM MODE The optional intercom mode gives u sers at multiple control heads connected to the same radio the ability to communicate with each other without transmitting over-the-air. Turn intercom mode on and off using the “INTERCOM” menu as follows: 1. Use to cycle through the available menu items until “INTERCOM? ...

  • Tyco Electronics MM23016 - page 32

    MM23016, Rev. C 32 The default emergency and emergency-capable talk groups can be locked out if they are NOT in an emergency state. If a talk group is locked out and is subsequently changed to the currently selected talk group, it will automatically be unlocked by the radio so the user can hear calls on the talk group. The radio may be configured s ...

  • Tyco Electronics MM23016 - page 33

    MM23016, Rev. C 33 Table 7-6: Scan Modes SCAN MODE EXPLANATION No Scan Eliminates distractions . Full communications (transmit and receive) on selected talk group. No calls received from other talk groups. Normal (Default) The user can scan all talk groups in the activ e profile that are not locked out as long as there is demand on the site. Priori ...

  • Tyco Electronics MM23016 - page 34

    MM23016, Rev. C 34 7.25.2 Scanning Priority The following lists the scanning priori ty order (from highest to lowest): 1. Selected talk group in emergency state 2. Default emergency group in emergency state 3. Selected talk group 4. Emergency capable group in emergency state 5. Priority 1 talk group 6. Priority 2 talk group 7. Other (non-priority) ...

  • Tyco Electronics MM23016 - page 35

    MM23016, Rev. C 35 7.26.1 Manually Dialing a Selective Ca ll (Sy stem Model Control Head) 1. Press *8 on the keypad. 2. Enter the number of the radio to be called (e.g ., 027-001-0006). If the region number (first 3 digits; 027 in this example) is the same as this radio’s regi on number, these digits do not need to be entered. Likewise, if the re ...

  • Tyco Electronics MM23016 - page 36

    MM23016, Rev. C 36 7.27 SELECTIVE ALERT Selective alert messaging is an OTP feature allo wing one of up to eight (8) pre-programmed text messages (refer to Section 7.27.3) to be sent from one radio to another. The user specifies a destination radio’ s User ID, selects on e of the pre-programmed text messages, and then transmits it to the destinat ...

  • Tyco Electronics MM23016 - page 37

    MM23016, Rev. C 37 Table 7-7: Status of Selective Alert STATUS MESSAGE DEFINITION Delivering Select Alert message transmit attempt Busy Too busy – Try again Dest Down Receiving radio not logged on – Not registered Not Reg Transmitting radio not logged on – Not registered Delivered Transmission complete Unreachable No response Partial Transmis ...

  • Tyco Electronics MM23016 - page 38

    MM23016, Rev. C 38 1. Press the * 9 keys. 2. Enter the telephone number. Ignore dashes/spaces, and precede the number with any required access digits such as a 1 for long distance. 3. Press the # key. 4. Wait a few seconds and then press and release the mi c’s PTT button to initiate the call. An initial ring tone plays indicating call initiation. ...

  • Tyco Electronics MM23016 - page 39

    MM23016, Rev. C 39 • If the emergency behavior of the active profile is Default, the radio moves to the default emergency voice group of the profile and this talk group becomes the select talk group. The display will alternate between the emergenc y voice group name and “EMERGENCY” and declaring User ID to indicate that the emergency has been ...

  • Tyco Electronics MM23016 - page 40

    MM23016, Rev. C 40 • If scan mode is set to “Normal” and the emergenc y was declared on the selected talk group, the selected/emergency talk group’s name remains in th e top line of the display. Audio on the emergency talk group is heard in the speaker/headset. • If scan mode is set to “Normal” and the emergency was declared on a talk ...

  • Tyco Electronics MM23016 - page 41

    MM23016, Rev. C 41 generation are generated automatically by the system and provisioned to authorized users. This process requires that authorized users login to the networ k and be authenticated. Encryption keys require no manual handling and are never sent “in the clear” over any network interface or air-link. 1. “Pls Login” appears displ ...

  • Tyco Electronics MM23016 - page 42

    MM23016, Rev. C 42 7.31 PRESET BUTTONS The front panel contains three buttons labeled A, B, and C. By holding one of these buttons down for approximately three (3) seconds, the following current inform ation is saved to the function of that button: • Selected talk group • Selected profile • Selected priority talk group • Lockouts • Scan m ...

  • Tyco Electronics MM23016 - page 43

    MM23016, Rev. C 43 8 P25/EDACS/CONVENTIONAL COMMON OPERATION 8.1 CH721 FRONT PANEL COMPONENTS The front panel of the control head includes a dot matrix display, controls for menu navigation, an emergency button, three pre-set buttons, a Po wer On-Off/Volume Control knob, and a microphone connector. In addition, the system model control head feature ...

  • Tyco Electronics MM23016 - page 44

    MM23016, Rev. C 44 Table 8-1: Front Panel Default Controls and Functions PART FUNCTION Power On- Off/Volume Control kn ob Turn knob clockwise to power on the rad io and increase vo lume. Turn counter- cloc kwise to decr e as e vol ume and pow er off the radi o. Mic Connect ion Connection for hand-he ld, hands- free, spea ker-mic, or head set. The E ...

  • Tyco Electronics MM23016 - page 45

    MM23016, Rev. C 45 PART FUNCTION DIS Used to adjust the cu rrent display inte nsity and th e ke yp ad bac klig h t level . IND Used to call an individual or make an all-ca ll by selecting the individual c all function. 8.1.1 Primary Functions (Quick Access) The secondary function of the SCAN button is t o toggle the keypad buttons between their pri ...

  • Tyco Electronics MM23016 - page 46

    MM23016, Rev. C 46 Line 1 shows the currently selected item name ( XXXXXXXX) from the list. Line 2 indicates the list (YYY) that the selection is to be made from and the number of the selected item (ZZZ) within the list. (In some cases the information on lines 1 and 2 will be exchanged.) Enter the system selection mode by pressing the SYS key. If S ...

  • Tyco Electronics MM23016 - page 47

    MM23016, Rev. C 47 Once the feature has been access ed, all normal menu functions work. The user can scroll up or down through all of the entries. Feature Encryption Display provid es the ability to view, in the order displayed, the following: • Serial number ROM data - serial number of the ROM • Feature encryption data stream - used to enable ...

  • Tyco Electronics MM23016 - page 48

    MM23016, Rev. C 48 These number fields show the set limits of the of the user's radio as: • SG# XXX - Maximum number of system/groups combination available • SY# XXX - Maximum trunked system limit • CH# XXX - Maximum number of conv entional channels available The user needs to know the limits of his radio befo re attempting to enable oth ...

  • Tyco Electronics MM23016 - page 49

    MM23016, Rev. C 49 FEATURE NUMBER POSSIBLE FEATURES STANDARD OR OPTIONAL 33 P25 Common Air Interface Optional 34 Direct Frequenc y Entry Optional 38 Radio TextLink Optional 8.6 SYSTEM/GROUP/CHANNEL SELECTION In the following description of SYSTEM/GROUP/CHANNEL SELECTION , the term group is used for both group and channel. The M7200 SYSTEM/GROUP/CHA ...

  • Tyco Electronics MM23016 - page 50

    MM23016, Rev. C 50 METHOD 2: If group selection is programmed as the primary function of the ramp control, select a group by pressing up or down, to scroll through the group list. The display registers the new group name on line 2. METHOD 3: Press GRP to enter the group select mode and follow the selection mode rules detailed earlier. Use the ramp ...

  • Tyco Electronics MM23016 - page 51

    MM23016, Rev. C 51 8.8.3 ProVoice Digital Mode ProVoice digital mode allows the radio to transm it and receive digitized voice signals. These digital signals provide improved weak signa l performance and they cannot be easily monitored with a standard receiver. Groups and channels programmed for ProV oice digital operation tran smit only digital si ...

  • Tyco Electronics MM23016 - page 52

    MM23016, Rev. C 52 • If Private mode is disabled and a private call is received, the Reply transmission will be in Private mode if the transmission is made during the scan ha ngtime. If the reply transmission occurs after the scan hangtime, the transmission will be in Clear mode. When operating on a group or channel programmed for private mode, a ...

  • Tyco Electronics MM23016 - page 53

    MM23016, Rev. C 53 8.8.5.2 Transmitting an Encrypted Call 1. Select the desired group or channel. 2. Place the radio in private mode by pressing the OPT button (System Model) or OPTION (Scan Model). If the last state of the radio was private mode, the private mode will be enabled on power up. In addition, the private mode will be enabled if fo rced ...

  • Tyco Electronics MM23016 - page 54

    MM23016, Rev. C 54 8.9 MACRO KEY OPERATION Macro key operation permits the user to accomplish a series of keystrokes with a single "macro" keystroke. Up to ten (10) macro keys can be defi ned, each capable of executing up to twenty (20) keystrokes, to any pushbutton input (i.e., keypad keys, buttons, etc.). Each macro key can be pre- prog ...

  • Tyco Electronics MM23016 - page 55

    MM23016, Rev. C 55 9 EDACS AND P25 TRUNKED OPERATION 9.1 RADIO STATUS ICONS Status icons are indicators that show the vari ous operating characteristics of the radio. Figure 9-1: Typical Display Table 9-1: Icons and Descriptions ICON DESCRIPTION Indicates the EDA CS system is i n Failsoft™ mod e (if enabled thr ough programming). Indicates select ...

  • Tyco Electronics MM23016 - page 56

    MM23016, Rev. C 56 9.2 MESSAGES During radio operation, various messages are displa yed on either line 1 or line 2. Typical messages include control channel status information, such as system busy or call denied, or messages associated with the radio's operation, (i.e. volume adju st). These messages are described as follows: Table 9-2: Displa ...

  • Tyco Electronics MM23016 - page 57

    MM23016, Rev. C 57 MESSAGE NAME DESCRIPTION WHC=1 Who Has Called This display indicates the number from the W ho Has Called list. Individual calls received but not responded to are stored in a Who Has Called list. This list is accessible by pressing the # key and then the INDV key after the Individual call has timed out or the Clear button is press ...

  • Tyco Electronics MM23016 - page 58

    MM23016, Rev. C 58 MESSAGE NAME DESCRIPTION BA NK= 1-8 The bank of ke ys that are going to be loaded when the keyloader loads encryption keys. This is only valid for radios that support VGS, VGE, or DES encryption. It is displayed on line 2 of the display when the encryption keyloader is connected. REGR_0x Dynamic Regroup Indicates which group in t ...

  • Tyco Electronics MM23016 - page 59

    MM23016, Rev. C 59 NAME TONE DESCRIPTI ON Carrier C ontrol Time r Fiv e short hi gh-pitc hed warning tones follo wed by a long low-pitche d tone. Sounds if th e progra mmed tim e for contin uous transmission is exceeded. The transmitter will shut down shortly afte r the alert, int errupting co mmunication s. Release and re-key the PTT button to mai ...

  • Tyco Electronics MM23016 - page 60

    MM23016, Rev. C 60 An example of the menu item selection process and menu item parameter change is detail ed below for the contrast menu item. 1. Press MENU to enter the menu mode. 2. Press the ramp control until the display shows: M E N U CONTRAST 3. Press MENU. The contrast menu item is activated and the displa y will be similar to the following: ...

  • Tyco Electronics MM23016 - page 61

    MM23016, Rev. C 61 FEATURE DISPLAY PARA METE R SETTINGS COMMENT Encryption Ke y Loading Menu item: KEYLOA D Once selected: KEY LOAD BANK = N Up to 8 banks of 7 keys Enables the radio to accept the loading of encryption keys. Display Current Encryption Key(s) Menu item: DISP KEY Once selected: SYS KEY , GRP KEY or CHN KEY and KEY = N Displays curren ...

  • Tyco Electronics MM23016 - page 62

    MM23016, Rev. C 62 9.5 RECEIVING A CALL 1. Turn the radio on by rotating the POWER ON-OFF/VOLUME knob clockwise (out of detent). A short alert signal (if enabled through programming) indicates the radio is read y to use. 2. The display shows the last selected or the power up (depending on programming) system and group names. If the radio is unable ...

  • Tyco Electronics MM23016 - page 63

    MM23016, Rev. C 63 9.8 EMERGENCY OPERATION The radio's ability to declare an emergency, clear an emergency, remain lo cked on an emergency and group, and the emergency audio and display fr eeze can each be enabled or disabled through programming. When an emergency is declared scanning will stop and will restart only after the emergency has bee ...

  • Tyco Electronics MM23016 - page 64

    MM23016, Rev. C 64 accomplished by enabling each radio t o analyze the signal quality of its current control channel and compare it with the signal quality of the control channel for each site in its adjacency scan list. (The signal quality metric used for the ProScan algorithm is based on a combination of both Received Signal Strength Indicator [R ...

  • Tyco Electronics MM23016 - page 65

    MM23016, Rev. C 65 programmed to provide Trunked Priority Group Scan cap ability, which operates similar to priority scan in Conventional mode. The following is a description of programmable scan features that should be helpful in understanding the Group Scan Operation of the radio: Scan Hang Time - the delay time the radio waits before resuming sc ...

  • Tyco Electronics MM23016 - page 66

    MM23016, Rev. C 66 9.10.3 Nuisance Delete A group can also be deleted from the scan list, if it is not the currently selected group by pressing ( - ) with during scan operation while the radio is displa yi ng the unwanted group. Th e group will be deleted from the system's group scan list in the sam e manne r as if done using the steps above. ...

  • Tyco Electronics MM23016 - page 67

    MM23016, Rev. C 67 programmed to ring when an individual call is receiv ed. If enabled, the ring begins five seconds after the caller unkeys and will continue until the PTT button, t he CLR button, or IND is pressed. Hookswitch functions the same as CLR key in I-CALL, phone call, and menu modes. If a response is made to the call prior to the progra ...

  • Tyco Electronics MM23016 - page 68

    MM23016, Rev. C 68 The saved call list shows all ten storage locations. If no calls have been received, the saved call list will be empty and the pre-stored list will be ava ilable upon entering the individual call mode. When in the saved call list, pressing MENU toggles the time stamp ON and OFF. The time stamp indicates how long ago the call was ...

  • Tyco Electronics MM23016 - page 69

    MM23016, Rev. C 69 9.13.2 Sending a Telephone Interconnect Call (Trunked Mode Only) Use the following procedures to initiate a nd complete a Telephone Interconnect call: 1. To select a previously stored phone number, select phone call mode from the menu, press PHN and use the ramp control to scroll through the list of stored phone numbers. The sele ...

  • Tyco Electronics MM23016 - page 70

    MM23016, Rev. C 70 METHOD 1: Press and hold PTT while entering the ove rdial num ber sequence from the keypad. This method sends DTMF tones during individual, telephone interconnect, trunke d group, or conventional channel calls. Anytime the PTT button is pressed and held, the keypad is enabled for DTMF entry. METHOD 2: Press PHN to enter the overd ...

  • Tyco Electronics MM23016 - page 71

    MM23016, Rev. C 71 9.14.1 Displays The following will be displayed on the control unit duri ng the various states of data m ode of operation. TX DATA Displayed on bottom line of display when the radio is transmitting a data call. RX DATA Display ed on bottom line of display when the radio is receiving a data call. DATA OFF Displayed on top line of ...

  • Tyco Electronics MM23016 - page 72

    MM23016, Rev. C 72 temporarily suspended. This mode is normally ex ited when the pre-programmed time expires; however, the following actions will terminate the scan loc kout mode before the timeout is completed. • The CLR (System Model) or CLEAR (Scan Model) button is pressed. • The PTT is pressed. • A group or system change is m ade. • Ent ...

  • Tyco Electronics MM23016 - page 73

    MM23016, Rev. C 73 or the MENU button has been pressed (the MENU button will override the time-out period), the status is selected and will be transmitted to the site or stored in the radio memory where it can be polled by the site at a future time. If the site receives the status pr operly, when transmitted or polled by the site, a high- pitched t ...

  • Tyco Electronics MM23016 - page 74

    MM23016, Rev. C 74 Pressing and holding the CLEAR (Scan Model) or CLR (System Model) button for 2.5 s econds toggles the user into and out of the dynamic regroup group set. A double beep will sound for entr y or exit. The display will indicate REGR_0x where "x" is a digit of 1 to 8 indi cating the group when dynamic regroup has been enabl ...

  • Tyco Electronics MM23016 - page 75

    MM23016, Rev. C 75 10 CONVENTIONAL OPERATION 10.1 RADIO STATUS ICONS Status icons are indicators that show the various opera ting characteristics of the radio. The icons appear on the first line of the display. Figure 10-1: Typical Display Table 10-1: Icons and Descriptions ICON DESCRIPTION Indicates selected group or channel is in scan list. Indic ...

  • Tyco Electronics MM23016 - page 76

    MM23016, Rev. C 76 MESSAGE NAME DESCRIPTION T99 ON Ty pe 99 Decode ON Indicates the Ty pe 99 Decode feature is enabled. T99 OFF Type 99 Decode OFF Indicates the Ty pe 99 Decode feature is disabled. PA ON Public Address ON Indicates that the public address function of the radio is enabled. PA OF F Public Address OFF Mome ntary (2 seconds) indicates ...

  • Tyco Electronics MM23016 - page 77

    MM23016, Rev. C 77 MESSAGE NAME DESCRIPTION M/A-COM Displayed on line 1 of the display under the revision selection of t he menu. The copyright year is shown in line 2 of display at the same time “(c) 2007.” 10.3 ALERT TONES The M7200 series mobile radio provides audible alert tones or “beeps” to indicate the various operating conditions. T ...

  • Tyco Electronics MM23016 - page 78

    MM23016, Rev. C 78 M E N U CONTRAST 3. Press MENU. The contrast menu item is activated and the displa y will be similar to the following: CNTRST = X Y Y Y Y Y Y Y Y Line 1 shows the active menu item and its current parameter setting (XXX). Line 2 shows the currently selected system or group name (YYYYYYY Y). 4. The menu item's parameter settin ...

  • Tyco Electronics MM23016 - page 79

    MM23016, Rev. C 79 FEATURE DISPLAY PARA METE R SETTINGS COMMENT Scan Add Menu item: SCAN A DD Once selected: Proper scan icon displayed. S, 2 or 1 Adds group or channel to scan list. Scan Delete Menu item: SCAN DEL Once selected: Scan icon goes out. Deletes group or channel from scan list. Scan Add/Delete Menu item: SCAN A /D When selected: Toggles ...

  • Tyco Electronics MM23016 - page 80

    MM23016, Rev. C 80 4. The radio is now ready to receive calls. 5. When the radio receives a call (and the correct enco ding is decoded, if programmed and ena bled), it unmutes on the channel and the BSY indicator comes on. 10.6 SENDING A CALL 1. Turn ON the radio and set the POWER ON-OFF/VOLUME knob to the desired volume level. Select the desired c ...

  • Tyco Electronics MM23016 - page 81

    MM23016, Rev. C 81 10.7.2 Tone Encode Transmission In conventional mode, two keys can be defined to be tone encode tr iggers. If either one of the pre- programmed tone encode triggers is pressed, a pr e-programmed tone sequence will be transmitted on the current system and channel. (See Section 10.7 if the emergency key is used.) The TX indicator w ...

  • Tyco Electronics MM23016 - page 82

    MM23016, Rev. C 82 5. A third press of ( + ) sets the channel for Priority 1 (P 1) scanning and is displayed on line 1. If the P1 or P2 channels are already set and a new channel is then as signed as the P1 or P2 channel, the previously assigned priority channel will change to non-priority scanni ng. The priority setting selection sequence is set a ...

  • Tyco Electronics MM23016 - page 83

    MM23016, Rev. C 83 10.11 SQUELCH ADJUST In the conventional mode of operation, the squelch can be re-adjusted in the MENU selection mode or from a front panel key on the keypad that has been pre-programmed. A default value of 9, or any user level between 1 and 16, can be selected using progr amming software. The user can change this setting either ...

  • Tyco Electronics MM23016 - page 84

    MM23016, Rev. C 84 enable or disable Type 99 decode. The pre-programme d key light will blink when Type 99 is disabled by the hookswitch. Type 99 decode will continue to be active while the radio's CLR button is pressed. This allows the user to monitor calls and still be alerted when a call is direct ed to the user. While the user continues to ...

  • Tyco Electronics MM23016 - page 85

    MM23016, Rev. C 85 11 P25 CONVENTIONAL OPERATION 11.1 RADIO STATUS ICONS Status icons are indicators that show the various opera ting characteristics of the radio. The icons appear on the first line of the display. Figure 11-1: Typical Display Table 11-1: Icons and Descriptions ICON DESCRIPTION Indicates selected group or channel is in scan list. I ...

  • Tyco Electronics MM23016 - page 86

    MM23016, Rev. C 86 11.2 MESSAGES During radio operation, various messages are displa yed on either line 1 or line 2. Typical messages include control channel status information, such as system busy or call denied, or messages associated with the radio's operation, (i.e. volume adju st). These messages are described as follows: Table 11-2: Disp ...

  • Tyco Electronics MM23016 - page 87

    MM23016, Rev. C 87 MESSAGE NAME DESCRIPTION CHN=1-99 Channel = 1 - 99 Displayed on line 1 of the display. This is a conventi onal channel index displayed when the group key is pressed. FIX LIST Fixed List The Priority scan list is fixed and cannot be changed using th e add or delete keys. FIXED P1 Fixed Priority 1 The Priority 1 scan channel is fix ...

  • Tyco Electronics MM23016 - page 88

    MM23016, Rev. C 88 11.4 MENU The menu function accesses features th at are not ava ilable directly from the keyp ad. The order and specific number of menu items available is configur able through programming. Upon radio power up, the menu item at the beginning of the menu list will alway s be displayed first. Subsequent access to the menu function ...

  • Tyco Electronics MM23016 - page 89

    MM23016, Rev. C 89 FEATURE DISPLAY PARA METER SETTINGS COMMENT Radio Revision Informa tion Menu item: REVISION Informational displays only (see radio); no user selectable settings. Selects the information display to view. Phone Call Menu item: PHN CALL Once selected: See Telephone Interconnect Call Section Allows access to the Phone Call Feature. E ...

  • Tyco Electronics MM23016 - page 90

    MM23016, Rev. C 90 FEATURE DISPLAY PARA METER SETTINGS COMMENT Mute Menu item: MUTE ON, OFF Toggles the mute function ON or OFF to control the audio output from the selected radio. Mute #1 Menu item: MUTE 1 ON, OFF Toggles the mute 1 function ON or OFF on radio #1. Mute #2 Menu item: MUTE 2 ON, OFF Toggles the mute 2 function ON or OFF on radio #2. ...

  • Tyco Electronics MM23016 - page 91

    MM23016, Rev. C 91 11.6 INDIVIDUAL CALLS IN P25 MODE 11.6.1 Transmitting an Individual Call 1. Select the desired P25 system. 2. Select the radio unit to call (callee source ID) fro m the pre-programmed individual call list or enter the ID number on the radio keypad. 3. Press and hold the PTT. 4. When grant tone is received (if enabled through prog ...

  • Tyco Electronics MM23016 - page 92

    MM23016, Rev. C 92 11.7.2 Receiving an Emergency Group Call 1. Select the desired P25 System and Talk Group/Channel. 2. When the radio detects an incoming Emergency Group Call, the radio will sound an alert tone and “ RXEMER ” will appear in the display. 3. Voice or emergency transmissions will be heard at the receiving radio. 4. To clear an em ...

  • Tyco Electronics MM23016 - page 93

    MM23016, Rev. C 93 12 BASIC TROUBLESHOOTIN G If the radio is not operating properly, check Table 12-1 for likely causes. For additional assistance, contact a qualified service technician. Table 12-1: Basic Troubleshooting SYMPTOM CAUSE SOLUTION Radio will not turn on. No power. Test the connection to the vehicle power supply. Radio will not turn of ...

  • Tyco Electronics MM23016 - page 94

    MM23016, Rev. C 94 SYMPTOM CAUSE SOLUTION Screen displays: NOAUTHM VNIC authentication of the radio failed. Contact system administrator. Screen displays: NOSUPRT The voice authentication security policy is set to only allow authenticated users. Contact system ad ministrator. Encrypted calls cannot be made. User not logged in. Log in (refer to Sect ...

  • Tyco Electronics MM23016 - page 95

    MM23016, Rev. C 95 13 TECHNICAL ASSISTANCE The Technical Assistance Center's (T AC) resources ar e available to help with overall system operation, maintenance, upgrades and product support. TAC is the point of contact when answers are needed to technical questions. Product specialists, with detailed knowledge of product operation, maintenance ...

  • Tyco Electronics MM23016 - page 96

    MM23016, Rev. C 96 14 KEYPAD REMAPPING If the keys have been remapped to provide new functions , fill in the following template for future reference. Button Function Button Function Emergency 1 Preset A 2 Preset B 3 Preset C 4 Rocker • 5 Rocker •• 6 Rocker + 7 Rocker - 8 MENU 9 OPT/OPTION * CLR/CLEAR 0 SCAN # ...

  • Tyco Electronics MM23016 - page 97

    MM23016, Rev. C 97 15 RADIO SETUP RADIO TYPE: FREQUENCY BAND: OPERATOR'S NAME: EMERGENCY GROUP: SYSTEM NUMBER SYSTEM NAME TRK/CNV GRP/CHN NUMBER GRP/CHN NAME USE ...

  • Tyco Electronics MM23016 - page 98

    MM23016, Rev. C 98 SYSTEM NUMBER SYSTEM NAME TRK/CNV GRP/CHN NUMBER GRP/CHN NAME USE ...

  • Tyco Electronics MM23016 - page 99

    MM23016, Rev. C 99 SYSTEM NUMBER SYSTEM NAME TRK/CNV GRP/CHN NUMBER GRP/CHN NAME USE ...

  • Tyco Electronics MM23016 - page 100

    MM23016, Rev. C 100 SYSTEM NUMBER SYSTEM NAME TRK/CNV GRP/CHN NUMBER GRP/CHN NAME USE ...

  • Tyco Electronics MM23016 - page 101

    MM23016, Rev. C 101 16 WARRANTY A. M/A-CO M, Inc. (her ein after " Se ller ") warran ts to the ori gin al p urc haser for use ( her ei naft er "B u yer") th at E qui pme nt ma nuf ac tured by or for the Seller shal l be free fro m defects in mat erial a nd wo rkma nship , and shall c onfor m to its pu blish ed spec ific ations . ...

  • Tyco Electronics MM23016 - page 102

    Tyco Electronics Wi reless S ystems Segment 221 Jefferson Ridge Parkway Lynchburg, Virginia 24501 (Outside USA, 1-434-385-2400) Toll Free 1- 800-528-77 11 www.macom-wireless.com P r i n t e d i n U . S . A . ...

Manufacturer Tyco Electronics Category Radio

Documents that we receive from a manufacturer of a Tyco Electronics MM23016 can be divided into several groups. They are, among others:
- Tyco Electronics technical drawings
- MM23016 manuals
- Tyco Electronics product data sheets
- information booklets
- or energy labels Tyco Electronics MM23016
All of them are important, but the most important information from the point of view of use of the device are in the user manual Tyco Electronics MM23016.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Tyco Electronics MM23016, service manual, brief instructions and user manuals Tyco Electronics MM23016. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Tyco Electronics MM23016.

Similar manuals

A complete manual for the device Tyco Electronics MM23016, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Tyco Electronics MM23016 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Tyco Electronics MM23016.

A complete Tyco Electronics manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Tyco Electronics MM23016 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Tyco Electronics MM23016, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Tyco Electronics MM23016, that we can find in the current document
3. Tips how to use the basic functions of the device Tyco Electronics MM23016 - which should help us in our first steps of using Tyco Electronics MM23016
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Tyco Electronics MM23016
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Tyco Electronics MM23016 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Tyco Electronics MM23016?

Use the form below

If you did not solve your problem by using a manual Tyco Electronics MM23016, ask a question using the form below. If a user had a similar problem with Tyco Electronics MM23016 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)