English dropdown-ico

Manual Makita DHP481RTJ

12 pages Not applicable
Download

Go to site of 12

Summary
  • Makita DHP481RTJ - page 1

    1 ENGLISH (Original instructions) INSTRUCTION MANUAL IMPORT ANT : Read Before Using. Cordless Hammer Driver Drill DHP481 014694 ...

  • Makita DHP481RTJ - page 2

    2 ENGLISH (Orig inal instruct ions) SPECIFICA TIONS Model DHP481 Drilling into concrete 16 mm Drilling into steel 13 mm Drilling into wood 76 mm Fastening wood screw 10 mm x 90 mm Capacities Fastening machine screw 6 mm High (2) 0 - 2,100 No load speed ( min -1 ) Low (1) 0 - 550 High (2) 0 - 31,500 Blows per minu te Low (1) 0 - 8,250 Overall leng t ...

  • Makita DHP481RTJ - page 3

    3 6. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the ri sk of electric shock. 7. Do not abuse the cord. Never use the cord for carrying, pulling o r unpl ugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or ent angled cords increase the ri sk of electric sho ...

  • Makita DHP481RTJ - page 4

    4 Service 28. Have your power tool serviced by a qualified repair person using only identical replacement p arts. This w ill ensure that the safety of the pow er tool is maintai ned. 29. Follow instruction for lubricating and changing accessories. 30. Keep handles dry , clean and free from oil and grease. GEB056-5 CORDLESS HAMME R DRIVER DRILL SAFE ...

  • Makita DHP481RTJ - page 5

    5 FUNCTIONAL DESCRIPTION CAUTION : • Always be sure tha t the tool is sw itched off and the battery cartridge is removed before adjusting or checking fun ction on th e tool. Inst alling or remo ving battery cartridge 1 2 3 014707 CAUTION : • Always switch o ff the too l before inst alling or removing of the battery cartridge. • Hold the tool ...

  • Makita DHP481RTJ - page 6

    6 LED indicator status Remaining battery capacity About 50% or more About 20% - 50% About less than 20% 013980 NOTE: • The LED display goes of f approximately one minute after releasing the switch trigger to save the battery power . T o check the remaining battery capacity , slightly pull th e switch trigger . • When the LED display light s up ...

  • Makita DHP481RTJ - page 7

    7 Speed change CAUTION : • Always set the speed change lev er fully to the correct position. If you operate the tool with the speed change lev er positioned ha lfway between the "1" side and, "2" side, the to ol may be damaged. • Do not use the speed change lever w hile the tool is running. The tool may be damaged. 1 014706 ...

  • Makita DHP481RTJ - page 8

    8 Inst alling or remo ving driver bit or drill bit 1 014698 T urn the sleeve counter clockwise to open the chuck jaws. Place the bit in the chuck as far as it will go. T urn the sleeve clo ckwise to tighten the chuck. T o remove the bit, turn the sleev e counterclockwise. Inst alling bit hol der 1 2 014699 Fit the bit holder into the pro trusion at ...

  • Makita DHP481RTJ - page 9

    9 Blow-out bulb ( optional accessor y) 1 002449 After drilling the hole, use the blow-out bulb to cle an the dust out of the ho le. Screwdriving operation First, slide the action mode change lever so that it points to the marking. Adjust the adjusting ring to the proper torque lev el for your w ork. Then proceed as follows. Place the point of the d ...

  • Makita DHP481RTJ - page 10

    10 OPTIONAL ACCESSORIES CAUTION : • These accessori es or atta chments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or atta chments might present a risk of injury to persons. Only use accessory or attachment for it s stated purpose. If you need any assista nce for more details regarding ...

  • Makita DHP481RTJ - page 11

    11 ...

  • Makita DHP481RTJ - page 12

    12 Makita Corporation www.makita.com 885341-3 ...

Manufacturer Makita Category Drill Machine

Documents that we receive from a manufacturer of a Makita DHP481RTJ can be divided into several groups. They are, among others:
- Makita technical drawings
- DHP481RTJ manuals
- Makita product data sheets
- information booklets
- or energy labels Makita DHP481RTJ
All of them are important, but the most important information from the point of view of use of the device are in the user manual Makita DHP481RTJ.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Makita DHP481RTJ, service manual, brief instructions and user manuals Makita DHP481RTJ. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Makita DHP481RTJ.

Similar manuals

A complete manual for the device Makita DHP481RTJ, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Makita DHP481RTJ by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Makita DHP481RTJ.

A complete Makita manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Makita DHP481RTJ - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Makita DHP481RTJ, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Makita DHP481RTJ, that we can find in the current document
3. Tips how to use the basic functions of the device Makita DHP481RTJ - which should help us in our first steps of using Makita DHP481RTJ
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Makita DHP481RTJ
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Makita DHP481RTJ in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Makita DHP481RTJ?

Use the form below

If you did not solve your problem by using a manual Makita DHP481RTJ, ask a question using the form below. If a user had a similar problem with Makita DHP481RTJ it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)