Manual Ryobi PLT3043A

18 pages 0.4 mb
Download

Go to site of 18

Summary
  • Ryobi PLT3043A - page 1

    OPERA T OR'S MANUAL String T rimmer PL T3043A R Y70101 Y our new trimmer has been engineered and manufactured to Ryobi’s high standard for dependability , ease of operation, and operat or safety . Properly cared for , it will give you years of rugged, trouble-free performance. Thank you for buying a Ryobi trimmer . SA VE THIS MANUAL FOR FUTU ...

  • Ryobi PLT3043A - page 2

    2 T ABLE OF CONTENTS SAFETY W ARNING: Do not attempt to operate this trimmer until you have read thoroughly and understand completely all instructions, safety rules, etc. contained in this manual. Failure to comply can result in accidents involving fire, electric shock, or serious personal injury. Save operator's manual and review frequently f ...

  • Ryobi PLT3043A - page 3

    3 SAFETY ■ ■ ■ ■ ■ Secure long hair so it is above shoulder level to prevent entanglement in any moving parts. ■ ■ ■ ■ ■ Keep all bystanders, children, and pets at least 15 m (50 ft.) away. ■ ■ ■ ■ ■ Do not operate this unit when you are tired, ill, or under the influence of alcohol, drugs, or medication. ■ ■ ■ ? ...

  • Ryobi PLT3043A - page 4

    4 SYMBOLS Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL NAME EXPLANATION Safety Alert Symbol Indicates danger, warning or caution. It means attention!!! Your safety is involved. Read Your ...

  • Ryobi PLT3043A - page 5

    5 SYMBOLS The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measu ...

  • Ryobi PLT3043A - page 6

    6 FEA TURES Fig. 1 THROTTLE TRIGGER MUFFLER GUARD ST ARTER GRIP CHOKE LEVER THROTTLE CONTROL AND REAR HANDLE FRONT HANDLE DRIVE SHAFT HOUSING STRING HEAD GRASS DEFLECTOR IGNITION SWITCH UNP ACKING INSTRUCTIONS ■ ■ ■ ■ ■ Carefully remove the product from the carton. ■ ■ ■ ■ ■ Inspect the product to make sure no breakage or damage ...

  • Ryobi PLT3043A - page 7

    7 ASSEMBL Y MUFFLER GUARD ASSEMBLY See Figure 4. 1. Remove muffler guard and two screws from the owner's kit. 2. Attach the muffler guard to the rear housing. NOTE: Make sure the bent end of the muffler guard fits securely into the opening of the rear housing. 3. Install two screws. 4. Tighten screws securely. ASSEMBLY INSTRUCTIONS: GRASS DEFL ...

  • Ryobi PLT3043A - page 8

    8 FILLING THE TANK 1. Clean surface around fuel cap to prevent contamination. 2. Loosen fuel cap slowly to release pressure and to keep fuel from escaping around the cap. 3. Carefully pour fuel mixture into the tank. Avoid spillage. 4. Prior to replacing the fuel cap, clean and inspect the gasket. 5. Immediately replace fuel cap and hand tighten. W ...

  • Ryobi PLT3043A - page 9

    9 OPERA TION ADVANCING THE STRING ADVANCING STRING USING THE EZ LINE™ TAP ADVANCE SYSTEM String advance is controlled by tapping string head on grass while running engine at full throttle. 1. Run engine at full throttle. 2. Tap string head on ground to advance string. String advances each time the head is tapped. 3. Several taps may be required u ...

  • Ryobi PLT3043A - page 10

    10 TO START A COLD ENGINE: 1. Lay trimmer on a flat, bare surface. Move switch to “I” (RUN) position. NOTE: Unit is equipped with a positive on-off switch, make sure switch is in the “I” (RUN) position before starting the unit. 2. Push primer bulb 8 to 10 times . 3. Set choke lever to choke position ( ). 4. Depress interlock, squeeze trigge ...

  • Ryobi PLT3043A - page 11

    11 MAINTENANCE W ARNING: Use only original manufacturer's replacement parts, accessories and attachments. Failure to do so can cause possible injury, poor performance and may void your warranty. ...

  • Ryobi PLT3043A - page 12

    12 STRING REPLACEMENT See Figures 12, 13, 14 and 15. 1. Stop the engine, disconnect the spark plug wire. Hold the string head and unscrew the spool retainer. Turn counterclockwise. 2. Remove the spool from the string head. NOTE: Keep the spring attached to the spool. Remove any old string remaining on the spool. 3. Cut two pieces of string, each be ...

  • Ryobi PLT3043A - page 13

    13 The fuel cap contains a non-serviceable filter and a check valve. A clogged fuel filter will cause poor engine perfor- mance. If performance improves when the fuel cap is loosened, check valve may be faulty or filter clogged. Replace fuel cap if required. SPARK PLUG This engine uses a Champion RCJ-6Y with 0,63 mm (.025 in.) electrode gap. Use an ...

  • Ryobi PLT3043A - page 14

    14 PROBLEM PROBLEM PROBLEM PROBLEM PROBLEM POS POS POS POS POS SIBLE CA SIBLE CA SIBLE CA SIBLE CA SIBLE CA USE USE USE USE USE SOLUTION SOLUTION SOLUTION SOLUTION SOLUTION IF THESE SOLUTIONS DO NOT SOL VE THE PROBLEM CONT ACT YOUR AUTHORIZED SERVICE DEALER. TROUBLESHOOTING 1. Check spark. Remove spark plug. Reattach the spark plug cap and lay spar ...

  • Ryobi PLT3043A - page 15

    15 PROBLEM PROBLEM PROBLEM PROBLEM PROBLEM POS POS POS POS POS SIBLE CA SIBLE CA SIBLE CA SIBLE CA SIBLE CA USE USE USE USE USE SOLUTION SOLUTION SOLUTION SOLUTION SOLUTION IF THESE SOLUTIONS DO NOT SOL VE THE PROBLEM CONT ACT YOUR AUTHORIZED SERVICE DEALER. TROUBLESHOOTING 1. Cut tall grass from the top down. 2. Operate trimmer at full throttle. C ...

  • Ryobi PLT3043A - page 16

    16 SOUND POWER/PRESSURE & HANDLE VIBRATION CHART FOR STRING TRIMMERS / BRUSHCUTTERS Information on Noise Emission per European Machine Safety Directive 98/37/EC. The individual equipment listed was operated in a manner consistent with normal working conditions. The A-weighted sound pressure level (LpA) at the operator ’s ear and the A-weighte ...

  • Ryobi PLT3043A - page 17

    17 NOTES ...

  • Ryobi PLT3043A - page 18

    983000-200 1-03 OPERA T OR'S MANUAL String T rimmer PL T3043A R Y70101 Ryobi T echnologies GmbH Itterpark 7 D-40724 Hilden Germany T el.: +49 (0)2103 / 29 58 0 Fax : +49 (0)2103 / 29 58 29 info@ryobi-rtg.de Ryobi T echnologies Customer Services Anvil House T uns Lane Henley-on-Thames RG9 1SA UK Ryobi T echnologies BP 50012 - 95945 Roissy CDG C ...

Manufacturer Ryobi Category Trimmer

Documents that we receive from a manufacturer of a Ryobi PLT3043A can be divided into several groups. They are, among others:
- Ryobi technical drawings
- PLT3043A manuals
- Ryobi product data sheets
- information booklets
- or energy labels Ryobi PLT3043A
All of them are important, but the most important information from the point of view of use of the device are in the user manual Ryobi PLT3043A.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Ryobi PLT3043A, service manual, brief instructions and user manuals Ryobi PLT3043A. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Ryobi PLT3043A.

Similar manuals

A complete manual for the device Ryobi PLT3043A, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Ryobi PLT3043A by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Ryobi PLT3043A.

A complete Ryobi manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Ryobi PLT3043A - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Ryobi PLT3043A, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Ryobi PLT3043A, that we can find in the current document
3. Tips how to use the basic functions of the device Ryobi PLT3043A - which should help us in our first steps of using Ryobi PLT3043A
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Ryobi PLT3043A
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Ryobi PLT3043A in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Ryobi PLT3043A?

Use the form below

If you did not solve your problem by using a manual Ryobi PLT3043A, ask a question using the form below. If a user had a similar problem with Ryobi PLT3043A it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)