English dropdown-ico

Manual Peavey 9/0180305014

48 pages 2.41 mb
Download

Go to site of 48

Summary
  • Peavey 9/0180305014 - page 1

    T ransT ube ® 112/212 EFX Operation Manual For more information on other great Peavey products, go to your local Peavey dealer or online at www.peav ey .com ...

  • Peavey 9/0180305014 - page 2

    2 Intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Intended to alert the user of the presence of important operating and maintenance (servicing) instructions in the literature accompanying the prod ...

  • Peavey 9/0180305014 - page 3

    TRANSTUBE ® EFX AMPLIFIERS Combining today’s hottest effects with the killer tone of Peavey’s patented T ransTube circuitry , the EFX Series offers unbelievable replication of tube amp characteristics. Nine footswitchable digital effects allow these two-channel amps to create a vast array of awesome sounds, without using external effects proce ...

  • Peavey 9/0180305014 - page 4

    4 FEA TURES AND CONTROLS FRONT P ANEL (1) INPUT (HIGH GAIN) This 1/4" mono jack is designed to accommodate most any guitar output signal. Input signal gain can be adjusted by the PRE GAIN (7) control (Lead channel only). (2) INPUT (LOW GAIN) *212 Only This 1/4" mono jack is designed to accommodate instruments with extremely high outputs t ...

  • Peavey 9/0180305014 - page 5

    (9) LEAD CHANNEL EQ These passive controls allow adjustment of LOW , MID, and HIGH frequencies. The “0” position is maximum cut; the “10” position is maximum boost. (10) POST GAIN This control sets the overall gain of the Lead channel. (1 1) CHANNEL SELECT This switch selects the channel (Lead or Clean). The ACTIVE CHANNEL LEDs (6) indicate ...

  • Peavey 9/0180305014 - page 6

    6 (18) POWER SWITCH This switch applies power to the unit in the “ON” position. One of the ACTIVE CHANNEL LEDs (6) will illuminate to indicate that the unit is on. Pressing the lower portion of the switch turns the unit off. BACK P ANEL Due to differences in the layout and features of the back panel, both the 1 12 and 212 back panels are presen ...

  • Peavey 9/0180305014 - page 7

    (20) REMOTE SWITCH CONNECTOR This 8-pin DIN connector is provided for the connection of the PFC 3 footswitch (included). The footswitch cable should be connected before the amp is powered up. See the FOOTSWITCH section of this manual for explanation of switch operation. (21) HEADPHONE JACK This 1/4" stereo (TRS) connector accepts standard ster ...

  • Peavey 9/0180305014 - page 8

    FOOTSWITCH MODE SELECT The PFC 3 footswitch operates in two modes: EFX Select mode and Preset Select mode. Pressing the MODE SWITCH (28) selects between the two modes. The active mode is indicated by the MODE LED (29). Illumination of the LED indicates EFX Select Mode; a dark LED indicates Preset Select Mode. Controls and indicators 30-35 perform d ...

  • Peavey 9/0180305014 - page 9

    TWEAK FEA TURES EFX amplifiers offer hidden features to further adjust the parameters of the digital effects. In addition to the adjustments described in the EFX ADJ P ARAMETERS section of this manual, additional tweaks may be made to customize ef fects to user preference. T weaks are made by pressing and holding the EFX ADJUST (12) control while s ...

  • Peavey 9/0180305014 - page 10

    SUGGESTED SETTINGS These are general settings to achieve the sound of various musical styles. The exact settings will depend on such things as the type of guitar being played and effects settings. The 212 EFX is used for demonstration, but the settings, with the exception of the Presence and Resonance controls, are also applicable to the 1 12 EFX. ...

  • Peavey 9/0180305014 - page 11

    11 LEAD CLEAN VINT AGE MODERN 1 12 EFX 212 EFX PRE MORE VINT AGE MODERN HIGH GAIN INPUT(S) POST SWITCH LOGIC SWITCH LOGIC EQUALIZA TION LOW MID HIGH EQUALIZA TION LOW MID HIGH VOLUME SEND RETURN EFFECTS LOOP 12” SPEAKER PREAMP OUT POWER AMP IN POWER AMP T . DYNAMICS RESONANCE PRESENCE SEND RETURN EFFECTS LOOP EXT . SPEAKER 12” SPEAKERS T . DYNA ...

  • Peavey 9/0180305014 - page 12

    12 Power Amplifier Section: Power measured with T . Dynamics ® @ 100% (5% THD, 1 kHz, 120 V AC line) Rated Power and Load: 65 W RMS into 8 Ohms Frequency Response: +3, -0 dB 100 Hz to 20 kHz @ 50 W RMS into 8 Ohms Hum and Noise: Greater than 90 dB below rated power Power Consumption: Domestic: 200 W @ 60 Hz, 120 V AC Export: 200 W @ 50/60 Hz, 220- ...

  • Peavey 9/0180305014 - page 13

    13 Power Amplifier Section: Power measured with T . Dynamics ® @ 100% (5% THD, 1 kHz, 120 V AC line) Rated Power and Load: 80 W RMS into 8 Ohms 100 W RMS into 4 Ohms Frequency Response: +0, -3 dB 100 Hz to 20 kHz @ 65 W RMS into 8 Ohms Hum and Noise: Greater than 90 dB below rated power Power Consumption: Domestic: 300 W @ 60 Hz, 120 V AC Export: ...

  • Peavey 9/0180305014 - page 14

    TRANSTUBE ® EFX AMPLIFICADORES Combinando los mejores efectos con el gran tono de los circuitos patentados T ransT ube de Peavey , la serie EFX ofrece replicas increíbles de las características de los amplificadores de bulbos. Nueve efectos controlados por pedalera permiten que estos amplificadores de dos canales creen un amplio rango de sonidos ...

  • Peavey 9/0180305014 - page 15

    CONTROLES Y CARACTERÍSITICAS P ANEL FRONT AL (1) ENTRADA (GANANCIA AL T A) Este conectador de 1/4" ha sido diseñado para aceptar casi todas las señales de guitarra. La ganancia de la señal de entrada puede ser ajustada por el control de PRE GANACIA (7) (sólo canal líder). (2) ENTRADA (GANANCIA BAJA) *Sólo 212 Este conectador de 1/4" ...

  • Peavey 9/0180305014 - page 16

    clásicos, mientras que la posición HIGH GAIN (Alta Ganancia) incrementa la ganancia y cambia el EQ para permitir que las líneas y solos sobresalgan. (9) EQ DEL CANAL LÍDER Estos controles pasivos permiten el ajuste de frecuencias GRA VES, MEDIAS y AGUDAS. Los cambios de tono producidos por estos controles varían dependiendo de la posición del ...

  • Peavey 9/0180305014 - page 17

    (17) T . DYNAMICS ® Este control ajusta el nivel de salida del amplificador desde 10% a 100%. Cuando se selecciona un nivel bajo, la simulación de compresión de bulbos será mucho más pronunciada. (18) INTERRUPTOR DE CORRIENTE Este interruptor aplica corriente a la unidad en la posición de encendido (ON). Uno de los LEDs DEL CANAL ACTIVO (6) s ...

  • Peavey 9/0180305014 - page 18

    (21) CONECT ADOR DE AURICULARES Este conectador TRS estéreo de 1/4" acepta auriculares estéreo estándar . El usar esta salida interrumpe el flujo de señal al parlante, haciéndolo ideal para situaciones de práctica. (22) CIRCUÍTO DE EFECTOS Estos conectadores TS de 1/4" permiten mandar y regresar señal de procesadores de efectos ex ...

  • Peavey 9/0180305014 - page 19

    PEDALERA SELECCIÓN DE MODO La pedalera PFC 3 opera en dos modalidades: Modo de selección de efectos y modo de selección de presets. Oprimir el INTERRUPT OR DE MODO (28) selecciona entre los dos modos. El modo activo es indicado por el LED DE MODO (29). La iluminación del LED indica la selección del modo de efectos; el LED oscuro indica modo pr ...

  • Peavey 9/0180305014 - page 20

    CARACTERÍSTICAS DE CAMBIOS Los amplificadores EFX ofrecen posibilidades ocultas para ajustar aun más los parámetros de los efectos digitales. Aparte de los ajustes descritos en la sección de AJUSTES DE P ARÁMETROS DE EFECTOS de este manual, se pueden llevar a cabo cambios adicionales para ‘personalizar ’ los efectos. Estos cambios se hacen ...

  • Peavey 9/0180305014 - page 21

    12. Selecciona las posiciones del INTERRUPTOR 2 (33) e INTERRUPTRO 3 (35) en las posiciones preferidas de default. (Default en este caso se refiere a la posición en que se encontrará cuando se seleccione el preset). 13. Oprime el INTERRUPTOR DE MODO (28) para regresar al Modo Preset. 14. Haz doble click en PRESET 1, 2, ó 3 (30,33 ó 35) para sal ...

  • Peavey 9/0180305014 - page 22

    22 ESPECIFICACIONES DEL EFX 1 12 Power Amplifier Section: Power measured with T . Dynamics ® @ 100% (5% THD, 1 kHz, 120 V AC line) Rated Power and Load: 65 W RMS into 8 Ohms Frequency Response: +3, -0 dB 100 Hz to 20 kHz @ 50 W RMS into 8 Ohms Hum and Noise: Greater than 90 dB below rated power Power Consumption: Domestic: 200 W @ 60 Hz, 120 V AC ...

  • Peavey 9/0180305014 - page 23

    23 ESPECIFICACIONES DEL EFX 212 Power Amplifier Section: Power measured with T . Dynamics ® @ 100% (5% THD, 1 kHz, 120 V AC line) Rated Power and Load: 80 W RMS into 8 Ohms 100 W RMS into 4 Ohms Frequency Response: +0, -3 dB 100 Hz to 20 kHz @ 65 W RMS into 8 Ohms Hum and Noise: Greater than 90 dB below rated power Power Consumption: Domestic: 300 ...

  • Peavey 9/0180305014 - page 24

    TRANSTUBE ® EFX AMPLIFICA TEUR Combinant un processeur d’effets modernes avec l’incroyable sonorité du circuit breveté Peavey T ransT ube, les amplis EFX vous permettent d’obtenir une mutitude de sonorités différentes, y compris celles habituellement réservées aux amplificateur classiques à lampes. Le processeur comprend tous les effe ...

  • Peavey 9/0180305014 - page 25

    CARACTERISTIQUES ET CONTROLES P ANNEAU A V ANT (1) ENTREE (HIGH GAIN) Entrée prévue pour la plupart des instruments.Le niveau peut-être ajusté grace au contrôle de PRE GAIN (7) (Canal Lead seulement). (2) ENTREE (LOW GAIN) *212 Uniquement Cette entrée est prévue pour les instruments à haut niveau de sortie pouvant causer une saturation (dis ...

  • Peavey 9/0180305014 - page 26

    (9) LEAD CHANNEL EQ Ces contrôles permettent d’ajuster les niveaux des fréquences graves (LOW), médiums (MID) et aigues (HIGH). Les variations produites par ces contrôles est dépendant de la position du sélecteur MODERN / VINT AGE /HIGH GAIN (8). Le “0” correspond au minimum de signal de la bande de fréquences correspondantes, le “10 ...

  • Peavey 9/0180305014 - page 27

    (17) T . DYNAMICS ® Ajuste la puissance de l’amplificateur de 10 à 100 % de la puissance maximale. Il vous per met de faire saturer l’étage de puissance même à des niveaux sonores modérés. Pour des réglages minimum, la simulation de la compression de l’étage de puissance sera plus pronon cée. (18) POWER SWITCH Ce sélecteur vous per ...

  • Peavey 9/0180305014 - page 28

    (22) BOUCLE D’EFFETS Ces Jacks 1/4" mono (TS) permettent au signal d’être envoyé vers une unité d’effets externes puis d’être récupéré. En utilisant des cables blindés, connectez du SEND à l’entrée de votre unité externe, et de sa sortie au RETURN. Seules des unités n’augmentant pas le niveau du signal doivent être con ...

  • Peavey 9/0180305014 - page 29

    PEDALIER MODE SELECT Le pédalier PFC 3 fonctionne sous 2 modes: EFX Select et Preset Select. Appuyez sur le sélecteur de mode (28) pour passer de l’un à l’autre. Le mode actif est indiqué par la Led (29). La Led illuminée indique le mode de sélection d’effets (EFX SELECT) alors qu’éteinte indique le mode de séction de presets (PRESE ...

  • Peavey 9/0180305014 - page 30

    30 TRUCS ET ASTUCES Les unités de la série EFX of frent des possibiltés vous permettant de configurer , mémoriser et rap- peler de nombreuses configurations d’effets sur chaque preset. Une fonction très interressante est l’ajustement des mémoires secondaires pour les paramètres d’ef fets. V ous devez pour cela utiliser le pédalier en ...

  • Peavey 9/0180305014 - page 31

    31 Power Amplifier Section: Power measured with T . Dynamics ® @ 100% (5% THD, 1 kHz, 120 V AC line) Rated Power and Load: 65 W RMS into 8 Ohms Frequency Response: +3, -0 dB 100 Hz to 20 kHz @ 50 W RMS into 8 Ohms Hum and Noise: Greater than 90 dB below rated power Power Consumption: Domestic: 200 W @ 60 Hz, 120 V AC Export: 200 W @ 50/60 Hz, 220- ...

  • Peavey 9/0180305014 - page 32

    32 Power Amplifier Section: Power measured with T . Dynamics ® @ 100% (5% THD, 1 kHz, 120 V AC line) Rated Power and Load: 80 W RMS into 8 Ohms 100 W RMS into 4 Ohms Frequency Response: +0, -3 dB 100 Hz to 20 kHz @ 65 W RMS into 8 Ohms Hum and Noise: Greater than 90 dB below rated power Power Consumption: Domestic: 300 W @ 60 Hz, 120 V AC Export: ...

  • Peavey 9/0180305014 - page 33

    TRANSTUBE ® -VERSTÄRKER Die EFX-Serie kombiniert die heißesten Ef fekte von heute mit dem fantastischen Klang von Peaveys patentierter T ransT ube-Schaltung und gibt so die charakteristischen Eigenschaften von Röhrenverstärkern auf unglaubliche Weise wieder . Die Zweikanalverstärker bieten neun über Pedal zuschaltbare digitale Effekte, mit d ...

  • Peavey 9/0180305014 - page 34

    FUNKTIONEN UND REGLER VORDERSEITE (1) INPUT (HIGH GAIN) An diese 1/4"-Monoklinke kann nahezu jedes Gitarren-Ausgangssignal angeschlossen werden. Der Eingangssignal-Gain kann mit Hilfe des PRE GAIN-Reglers (7) eingestellt werden (nur Lead-Kanal). (2) INPUT (LOW GAIN) *Nur 212 An diese 1/4"-Monoklinke können Instrumente mit extrem hohen Au ...

  • Peavey 9/0180305014 - page 35

    (9) LEAD CHANNEL EQ Mit diesen passiven Reglern lassen sich die LOW -, MID- und HIGH-Frequenzen einstellen. Die Position “0” liefert maximale Absenkung, die Position “10” maximale Anhebung. (10) POST GAIN Mit diesem Regler wird der Gesamt-Gain des Lead-Kanals festgelegt. (1 1) CHANNEL SELECT Mit diesem Schalter wird der Kanal ausgewählt (L ...

  • Peavey 9/0180305014 - page 36

    (17) T . DYNAMICS ® Mit diesem Regler wird der Ausgangspegel des V erstärkers von 10% auf 100% erhöht. Bei kleineren Pegeln wird die Simulation der Röhrenkompression wesentlich deutlicher . (18) NETZSCHAL TER Steht dieser Schalter auf der Position “ON”, wird das Gerät mit Strom versorgt. Eine der ACTIVE CHANNEL LEDs (6) leuchtet dabei auf ...

  • Peavey 9/0180305014 - page 37

    (21) KOPFHÖRERKLINKE Dieser 1/4"-Stereo- (TRS-) Stecker ist für herkömmliche Stereokopfhörer geeignet. W erden die Kopfhörer in diese Klinke gesteckt, wird das Signal zum Lautsprecher unterbrochen. Dies bietet eine ideale Möglichkeit, um lautlos üben zu können. (22) EFFEKTSCHLEIFE Über diese 1/4"-Mono- (TS-) Klinken kann das Sign ...

  • Peavey 9/0180305014 - page 38

    FUSSSCHAL TER MODE SELECT Der PFC 3-Fußschalter arbeitet in zwei Modi: EFX Select-Modus und Preset Select-Modus. Durch Drücken des MODE SWITCH (28) wird zwischen den beiden Modi umgeschaltet. Der aktive Modus wird durch die MODE LED (29) angezeigt. Leuchtet die LED auf, ist der EFX Select-Modus eingeschaltet, leuchtet sie nicht auf, ist der Prese ...

  • Peavey 9/0180305014 - page 39

    FUNKTIONEN ZUR FEINEINSTELLUNG (TWEAKS) Die EFX-V erstärker sind mit verborgenen Funktionen ausgestattet, mit denen die Parameter der digitalen Effekte noch weiter eingestellt werden können. Zusätzlich zu den V eränderungen, die im Abschnitt EFX ADJ P ARAMETERS dieses Handbuchs beschrieben sind, können weitere Feineinstellungen (T weaks) vorge ...

  • Peavey 9/0180305014 - page 40

    10. Drücken Sie SWITCH 3 (35), um auf die andere Delay/Reverb-Position umzuschalten. Die DELA Y/REVERB LED (34) leuchtet auf oder verlischt, je nach Status entsprechend Schritt 10. 1 1. Stellen Sie T yp, Dauer und V olumen des Delay wie gewünscht mit dem DELA Y -Regler (14) ein. 12. Stellen Sie die Position von SWITCH 2 (33) und SWITCH 3 (35) auf ...

  • Peavey 9/0180305014 - page 41

    41 Power Amplifier Section: Power measured with T . Dynamics ® @ 100% (5% THD, 1 kHz, 120 V AC line) Rated Power and Load: 65 W RMS into 8 Ohms Frequency Response: +3, -0 dB 100 Hz to 20 kHz @ 50 W RMS into 8 Ohms Hum and Noise: Greater than 90 dB below rated power Power Consumption: Domestic: 200 W @ 60 Hz, 120 V AC Export: 200 W @ 50/60 Hz, 220- ...

  • Peavey 9/0180305014 - page 42

    42 Power Amplifier Section: Power measured with T . Dynamics ® @ 100% (5% THD, 1 kHz, 120 V AC line) Rated Power and Load: 80 W RMS into 8 Ohms 100 W RMS into 4 Ohms Frequency Response: +0, -3 dB 100 Hz to 20 kHz @ 65 W RMS into 8 Ohms Hum and Noise: Greater than 90 dB below rated power Power Consumption: Domestic: 300 W @ 60 Hz, 120 V AC Export: ...

  • Peavey 9/0180305014 - page 43

    NOTES: 43 ...

  • Peavey 9/0180305014 - page 44

    44 NOTES: ...

  • Peavey 9/0180305014 - page 45

    45 NOTES: ...

  • Peavey 9/0180305014 - page 46

    46 IMPOR T ANT SAFETY INSTRUCTIONS W ARNING: When using electric products, basic cautions should always be followed, including the following: 1. Read all safety and operating instructions before using this product. 2. All safety and operating instructions should be retained for future reference. 3. Obey all cautions in the operating instructions an ...

  • Peavey 9/0180305014 - page 47

    47 PEA VEY ELECTRONICS CORPORA TION LIMITED W ARRANTY Effective Date: July 1, 1998 What This Warranty Covers Y our Peavey Warranty covers defects in material and workmanship in Peavey products purchased and serviced in the U.S.A. and Canada. What This Warranty Does Not Cover The Warranty does not cover: (1) damage caused by accident, misuse, abuse, ...

  • Peavey 9/0180305014 - page 48

    Features and specifications subject to change without notice. Peavey Electronics Corporation • 71 1 A Street • Meridian • MS • 39301 (601) 483-5365 • F AX (601) 486-1278 • www .peavey .com ©2001 Printed in the U.S.A. 9/01 80305014 ...

Manufacturer Peavey Category Musical Instrument Amplifier

Documents that we receive from a manufacturer of a Peavey 9/0180305014 can be divided into several groups. They are, among others:
- Peavey technical drawings
- 9/0180305014 manuals
- Peavey product data sheets
- information booklets
- or energy labels Peavey 9/0180305014
All of them are important, but the most important information from the point of view of use of the device are in the user manual Peavey 9/0180305014.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Peavey 9/0180305014, service manual, brief instructions and user manuals Peavey 9/0180305014. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Peavey 9/0180305014.

Similar manuals

A complete manual for the device Peavey 9/0180305014, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Peavey 9/0180305014 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Peavey 9/0180305014.

A complete Peavey manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Peavey 9/0180305014 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Peavey 9/0180305014, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Peavey 9/0180305014, that we can find in the current document
3. Tips how to use the basic functions of the device Peavey 9/0180305014 - which should help us in our first steps of using Peavey 9/0180305014
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Peavey 9/0180305014
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Peavey 9/0180305014 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Peavey 9/0180305014?

Use the form below

If you did not solve your problem by using a manual Peavey 9/0180305014, ask a question using the form below. If a user had a similar problem with Peavey 9/0180305014 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)