English dropdown-ico

Manual LevelOne FCS-1151

110 pages Not applicable
Download

Go to site of 110

Summary
  • LevelOne FCS-1151 - page 1

    IP CamSecure Lite User ’ s Manual Copyright (c) 2010 Digital Da ta Communications Co., Ltd. All Rights Reserved. All features and functions are subject to change w ithout no tice. Please visit www .level1.com f or the latest ones. V e r . 1.26-0706 ...

  • LevelOne FCS-1151 - page 2

    IP CamSecure Table of Contents Index INST ALLA TION. ........ ........ ........ ........ ........ ........ ........ ......... ........ ........ ........ ........ ........ ........ ........ ........ ......... ........ ........ ........ ........ ...... 4 M INIMUM S YSTEM R EQUIREMENT ........ ......... ........ ........ ........ ........ ........ ... ...

  • LevelOne FCS-1151 - page 3

    IP CamSecure Installation 4 Inst allation Minimum System Requirement Inst a ll IP camera(s) S tep 1: Set up the IP camera referring to the quick installation guide provi ded. S tep 2: Check the network between the IP camera and the system. S tep 3: A dd the IP camera to the system. See details on later pages. Inst a ll capture card(s) S tep1: Inser ...

  • LevelOne FCS-1151 - page 4

    IP CamSecure Installation IP CamSecure Inst allation Run Setup.exe from the CD-ROM root directory and f ollow the onscreen instruction to complete installation. Custom Setup T ype : Y ou may install the system to the directory of your preference and choo se which feature you want to install to the PC. Hint: Y ou may , fo r insta nce, install only P ...

  • LevelOne FCS-1151 - page 5

    IP CamSecure Main Console 6 Main Console The main operation system. T o activate schedule recording, setup smart guard and configure system setting. ...

  • LevelOne FCS-1151 - page 6

    IP CamSecure Main Console Exit : Shut down the main console or log out current u ser . Minimize : Minimize the Main Console. Screen Division : Alloca te the sub-screen displays of cameras by clicking on the icon of d esired layout. Quick switch to single cam era display by double click the particular sub-screen. Double click the single camera displ ...

  • LevelOne FCS-1151 - page 7

    IP CamSecure Main Console 8 On Screen Menu : Right click on the camera screen and get the On Screen Menu from which you can Enable Move and T alk, and Connect / Disconne ct the camera. Enable Move : By selecting the en able move function, you may adjust the camera’s view b y clicking and dragging on the display screen. T o cancel this function, r ...

  • LevelOne FCS-1151 - page 8

    IP CamSecure Main Console St a rt : Click on the pull do wn menu to S tart/S top Schedule System, S tart/S top Smart Guard System, S tart/S top Counting A pplication or click on S tar t/S top Monitor All to activate/ deactivate all the functions above. S top alarm by clicking Open Event Report. Y ou can also cancel all events by click the Crystal B ...

  • LevelOne FCS-1151 - page 9

    IP CamSecure Main Console 10 Schedule : Schedule recording time table and setup recorder configuration. See Schedule in detail on later pages. Smart Guard : Add/edit type(s) of events which you want to detect; setup reaction(s) responding to events. See Guard in detail on later pages. Config : Setting, Save/Load Conf iguration, Counting Applicat io ...

  • LevelOne FCS-1151 - page 10

    IP CamSecure Playback 1 1 Playback Wat ch the recorded video, view and/or search for unusual events and recorded system informat ion. *There is onl y 1 channel displa y ed in Pla yback in IP CamSecure Lite while there are up to 16 channels displa y e d in IP CamSecure Pro/Pro Plus simult aneously . ...

  • LevelOne FCS-1151 - page 11

    IP CamSecure Playback 12 Scroll Bar : Quick search on the video, drag it to where you want to review . Exit : T u rn off the Play b ack Console. Minimize : Minimizes the p layback Console wi ndo w . Control : Play , pause and stop the video. Cue : Set up the Cue In and Cue out points o f the clip you want to sav e as a video clip or a back up file ...

  • LevelOne FCS-1151 - page 12

    IP CamSecure Playback Browse Mode : Play the recorded video. Search Mode : Click on the Search Mode icon and get the Intelligent Search T ool panel. Y ou can setup unusual events here to detect abnormality that occurred during the video was recorded. T o setup unusual events, see this in detail on later pag es. S S C C R R E E E E N N D D I I V V I ...

  • LevelOne FCS-1151 - page 13

    IP CamSecure Playback 14 Day-T im e Panel T o withdraw the record S tep 1: From the window at the top left of the Day- T im e Panel, select the date you want to check, and you will see red/green lines show on the time table implying available recorded video. S tep 2: Y ou can select the video clip you want to review by left-clicking and dragging to ...

  • LevelOne FCS-1151 - page 14

    IP CamSecure Playback Search Mode Unusual Event - General Motion Intelligent Search T ool p ane l : Click on the Search Mode icon and get the Intelligent Search T ool panel. Y ou can setup unusual events here to detect abnormality tha t occurred during the video was recorded. There are 5 types of unusual events: General Motion Foreign Object Missin ...

  • LevelOne FCS-1151 - page 15

    IP CamSecure Playback 16 Unusual Event - General Motion Sensitivity : Click and move the contro l bar to the right to increase sensitivity , t hat is, a relatively small movement will trigger the ala rm. Move to the left to reduce the sensitivity of mo vement detection. Set up an approp riate Sensitivity value will reduce the chance of false alarm. ...

  • LevelOne FCS-1151 - page 16

    IP CamSecure Playback Unusual Event - Foreign Object Intelligent Search T ool p ane l : Click on the Search Mode icon and get the Intelligent Search T ool panel. Y ou can setup unusual events here to detect abnormality tha t occurred during the video was recorded. Foreign Object : A larm is set off when an object appears in the defined area on the ...

  • LevelOne FCS-1151 - page 17

    IP CamSecure Playback 18 Unusual Event - Foreign Object Sensitivity : Click and move the contro l bar to the right to increase sensitivity , t hat is, a relatively small movement will trigger the ala rm. Move to the left to reduce the sensitivity of mo vement detection. Interval : Click and move the control bar to the right to increase interval tim ...

  • LevelOne FCS-1151 - page 18

    IP CamSecure Playback Unusual Event - Missing Object Intelligent Search T ool p ane l : Click on the Search Mode icon and get the Intelligent Search T ool panel. Y ou can setup unusual events here to detect abnormality that occurred during the video was recorded. Missing Object : Alarm is set off when the defined object is removed from the defined ...

  • LevelOne FCS-1151 - page 19

    IP CamSecure Playback 20 Unusual Event - Missing Object / Lose Focus / Camera Occlusion Sensitivity : Click and move the contro l bar to the right to increase sensitivity , t hat is, a relatively small movement will trigger the ala rm. Move to the left to reduce the sensitivity of mo vement detection. Interval : Click and move the control bar to th ...

  • LevelOne FCS-1151 - page 20

    IP CamSecure Playback Enhancement General Setting : Check the circle and cho se w hethe r you want to apply the setting to all the channels or only to those currently show on the screen. Filter Setting Visibility : Check the box and adjust the gamma value of the image, which means, you may enhance the image and make it cleaner . Sharpen : Check the ...

  • LevelOne FCS-1151 - page 21

    IP CamSecure Playback 22 Save Video / Save Image Save Video S tep 1: Choose the camera display you want to save as a video clip. S tep 2: Set up the Cue In and Cue Out points, the cue in and cue out time will show up on the display . S tep 3: Click Save Video icon, choose the folder where you want to save the f ile, enter the file name and click SA ...

  • LevelOne FCS-1151 - page 22

    IP CamSecure Playback Print / Backup Print Page Setting : Print in original size or fit the page. A lign Ima ge : T op,Center or Bottom Print Content : Print the im age from selected channel or all the channels shown on the sc reen Backup : Different from Save Vide o, the Backup function saves everything fro m the Playback panel, including log info ...

  • LevelOne FCS-1151 - page 23

    IP CamSecure Playback 24 Log Viewer *IP CamSecure Lite only ha s S y s tem Log option in Log Viewer . Unusual Event : Y ou can check out the history of Unusual Event that had been detected by Smart Guard System. Step1 : Choose the type of event you want to check or select “All” on the pull-down menu for all types of events. Step 2 : Choose from ...

  • LevelOne FCS-1151 - page 24

    IP CamSecure Playback Log Viewer System Log : Y ou can choose the Log T ype form the pull-down menu, including: Console S tartup, Console Shutdown, User Log in , User Logout , S tart Schedule, S top Schedule, Execute Recycle, Execute Backup, Enable Channel, Disable Channel, S tart Smart Guard. Step1 : Choose the type of event you want to check or s ...

  • LevelOne FCS-1151 - page 25

    IP CamSecure Playback 26 Log Viewer - Counting Application Counting A pplication : Y ou can see the results of Counting Application during the time period you set. Counting A pplication (Diagra m) : The Counting A pplication result data will show in a diagram. ...

  • LevelOne FCS-1151 - page 26

    IP CamSecure Playback Setting Dat aba se Source : Choose from which location you are going to withdra w the record, from the PC you are working with or to get the access a database via the Internet. See Config > Remote Playback Server in detail on later pages. Play : Play when open: Check the box and set the system to play the video clip every t ...

  • LevelOne FCS-1151 - page 27

    IP CamSecure 28 Schedule Click on Schedule icon on Main Console and get the Schedule conf iguration panel to setup the time schedule for video reco rding. ...

  • LevelOne FCS-1151 - page 28

    IP CamSecure Load Camera / Channel Day Mode Day Mode Schedule the cameras on a da ily basis, which means that the recorder will be on and off, at the same time every day , according to the same sche dule you setup. T o setup the time schedule for each camera, you may 1. Load the preset Modes o r 2. Insert a new schedule manually . T o load p reset ...

  • LevelOne FCS-1151 - page 29

    IP CamSecure 30 Minor Mode : The system will start recording only w he n a motio n on the screen is detected, 24 hours a day (shown as a green bar on S chedule Configuration panel), with the setting of 15 FPS, Low quality and Low resolution. Y ou can adjust the sensitivity , interval and detection area of motion detection in schedule Configure. A d ...

  • LevelOne FCS-1151 - page 30

    IP CamSecure Option 2 : Click the Configure icon or doub le click schedule information on the screen (highlighted in blue), to obtain the Encoding Options panel and change the setting as wished. Note: The time schedule setting is based on 15 minutes. Copy T o Configure Schedule information Copy To: You may set up the schedule for each channel/camer ...

  • LevelOne FCS-1151 - page 31

    IP CamSecure 32 A lw ays Record: Select this option to reco rd the video at all time. Record on Event: Select this option to obta in the Select Event panel. From the Smart Guard/Digital Input list, che ck the box of the camera(s) that you want to t rigger the recording action. Click OK to complete the setting. *Smart Guard is only in IP CamSecure P ...

  • LevelOne FCS-1151 - page 32

    IP CamSecure Week Mode : Schedule the cameras for each day of the week differently . Besides that, you ma y appoint extra holidays in Week Mode. Default : Follow the same process to setup the schedule for every day in a week. Holiday : Y ou may appoin t Holiday(s) on which the system will work as the setting of Sunday . Custom : Or you can appoint ...

  • LevelOne FCS-1151 - page 33

    IP CamSecure 34 Guard *Guard is only in IP CamSecure Pro/Pro Plus. Click on the Guard bottom on the Main Console and start Event and Action Configuration panel. Y ou need to assign an event you want t o detect and then set up an action with which the system will react when the assigned event is detected. Cryst al Ba ll : Indicates the working statu ...

  • LevelOne FCS-1151 - page 34

    IP CamSecure Event There are three sources of events: Camera (video image), Digital input (device that connected to you PC) and System (condition of your ha rdware). Y ou can assign multiple events by following the instruction below . A ssign a Ca mera event Step 1 : Choose a channel from cameras and click the Insert Event icon. Step 2 : There are ...

  • LevelOne FCS-1151 - page 35

    IP CamSecure 36 Event - Signal Lost Basic Enable Event : Check the box to activate. Life Cycle A utoma tic cancel event w hen event disappears : the alarm/action will be off once the abnormality is fixed or ends. Manual cancel event or event last triggered : The alarm/action will continue until being cancel from the Main Console (S tart>Open Eve ...

  • LevelOne FCS-1151 - page 36

    IP CamSecure Event - General Motion Detect any movement in the defin ed detection zone. Enable Event Life Cycle A cti vated Period Basic Setting Enable Event : Check the box to activate. Life Cycle A utoma tic cancel event w hen event disappears : the alarm/action will be off once the abnormality is fixed or ends. Manual cancel event or event last ...

  • LevelOne FCS-1151 - page 37

    IP CamSecure 38 Event - General Motion Sensitivity Interval Region Definition St a rt Simulation A d vanced setting Sensitivity : Click and move the contro l bar to the right to increase sensitivity , t hat is, a relatively small movement will trigger the ala rm. Move to the left to reduce the sensitivity of mo vement detection. Set up an approp ri ...

  • LevelOne FCS-1151 - page 38

    IP CamSecure Event - Foreign Object Alarm will be set off when an object appears in the defined area on the screen. Enable Event Life Cycle A cti vated Period Basic Setting Enable Event : Check the box to activate. Life Cycle A utoma tic cancel event w hen event disappears : the alarm/action will be off once the abnormality is fixed or ends. Manual ...

  • LevelOne FCS-1151 - page 39

    IP CamSecure 40 Event - Foreign Object Sensitivity Interval Region Definition Define object size St a rt Simulation A d vanced setting Sensitivity : Click and move the contro l bar to the right to increase sensitivity , t hat is, a relatively small movement will trigger the ala rm. Move to the left to reduce the sensitivity of mo vement detection. ...

  • LevelOne FCS-1151 - page 40

    IP CamSecure Event - Foreign Object Hint : For example, if you want to pre vent somebody leaving a briefcase in a hallway , you may put a briefcase in the hallway where the camera is aimin g on. On the screen of the camera, draw an area fit the size of the briefcase and define it as the object size; and then remove the briefcase before activate Sma ...

  • LevelOne FCS-1151 - page 41

    IP CamSecure 42 Event - Missing Object Alarm will be set off when an object disappears in the defined area on the sc reen. Enable Event Life Cycle A cti vated Period Basic Setting Enable Event : Check the box to activate. Life Cycle A utoma tic cancel event w hen event disappears : the alarm/action will be off once the abnormality is fixed or ends. ...

  • LevelOne FCS-1151 - page 42

    IP CamSecure Event - Missing Object Sensitivity Interval Region Definition Define object size St a rt Simulation A d vanced setting Sensitivity : Click and move the contro l bar to the right to increase sensitivity , t hat is, a relatively small movement will trigger the ala rm. Move to the left to reduce the sensitivity of mo vement detection. Set ...

  • LevelOne FCS-1151 - page 43

    IP CamSecure 44 Event - Missing Object Hint : For example, if you want to pre vent somebody remove the computer monitor on the desk; draw an area fit the size of the monito r on the screen. St a rt Simulation : Click S tart Simulation bottom and test the function on the p review screen. ...

  • LevelOne FCS-1151 - page 44

    IP CamSecure Event - Lose Focus Alarms you when any of the cam era is losing focus and has blur image. Enable Event Life Cycle A cti vated Period Basic Setting Enable Event : Check the box to activate. Life Cycle A utoma tic cancel event w hen event disappears : the alarm/action will be off once the abnormality is fixed or ends. Manual cancel event ...

  • LevelOne FCS-1151 - page 45

    IP CamSecure 46 Event - Lose Focus Sensitivity Interval Ignore Lighting St a rt Simulation A d vanced setting Sensitivity : Click and move the contro l bar to the right to increase sensitivity , t hat is, a relatively small movement will trigger the ala rm. Move to the left to reduce the sensitivity of mo vement detection. Set up an approp riate Se ...

  • LevelOne FCS-1151 - page 46

    IP CamSecure Event - Camera Occlusion Alarms you when any of the cam era is blocked. Enable Event Life Cycle A cti vated Period Basic Setting Enable Event : Check the box to activate. Life Cycle A utoma tic cancel event w hen event disappears : the alarm/action will be off once the abnormality is fixed or ends. Manual cancel event or event last tri ...

  • LevelOne FCS-1151 - page 47

    IP CamSecure 48 Event - Camera Occlusion Sensitivity Interval Ignore Lighting St a rt Simulation A d vanced setting Sensitivity : Click and move the contro l bar to the right to increase sensitivity , t hat is, a relatively small movement will trigger the ala rm. Move to the left to reduce the sensitivity of mo vement detection. Set up an approp ri ...

  • LevelOne FCS-1151 - page 48

    IP CamSecure Event - Digit al Input Event Step 1 Step 2 Step 1 : Click and highlight Dig ital Input on the event type list and click Inset Event icon. Step 2 : Select the device that connected to your system, that is, the PC you are working. Basic Setting Enable Event : Check the box to activate. Life Cycle A utoma tic cancel event w hen event disa ...

  • LevelOne FCS-1151 - page 49

    IP CamSecure 50 Event - System Event Step 1 Step 2 Step 1 : Click and highlight System Event on the event type list and click Inset E vent icon. Step 2 : Select the Event T ype (Disk S pace Exhausted) and then click OK. Basic Setting : for Disk S pace Exhausted Enable Event : Check the box to activate. Life Cycle A utoma tic cancel event w hen even ...

  • LevelOne FCS-1151 - page 50

    IP CamSecure A ction Insert A c tion : T o setup act ions responding to an unusual event. Step 1 Step 2 Step 1 : Choose an event and click the “Insert Action” ico n. Step 2 : Th ere are 6 types of actions: On Screen Disp lay , Play Sound, Send E-mail, Send SMS Message, PTZ Preset Go and Signal Digital Output. Select the action you want on Actio ...

  • LevelOne FCS-1151 - page 51

    IP CamSecure 52 A ction - A c tion T ype On Screen displa y : A red warning will be flashing on the screen of Main Conso le, indicating w h ich type of unusual event is de tected. Play Sound : Sound alarm warning. Choo se a Wave file (.wav) and the system will play the so und as alarm when an unusual e vent is detected. Send E-mail : The system wil ...

  • LevelOne FCS-1151 - page 52

    IP CamSecure 53 Configuration Modify the setting and access count ing application, log viewer, backup, and network services. Click on the Config icon, se lect from the drop-down menu and open the Configuration panel. Config ...

  • LevelOne FCS-1151 - page 53

    IP CamSecure 54 Setting – General St a rtup Panel Resolution DDNS Service Automatically Popup Event Report Startup: Check the box and activate the fun ctions as the system starts. You may start/stop the function in Monitor panel on the Main Console. Panel Resolution: Set up the resolution of the control panel. You may select A uto Fit to have the ...

  • LevelOne FCS-1151 - page 54

    IP CamSecure Setting – General Storage Location Automatic Recycle Keep Video Keep Event Log Keep S y s tem Log Keep Counting Log Storage Location : Assign the path and folder in which the system saves the files. Automatic Recycle: The system will automatically delete the oldest file when the storage spac e is low . A utoma tic Rec y cle : The sys ...

  • LevelOne FCS-1151 - page 55

    IP CamSecure 56 Setting – General St atus Display A udio Preview A udio Pre view : Assign the audio channel to preview and the sound volume. St a tus Displa y : Select which inform ation you want to show on the informat ion-display on Main Console. ...

  • LevelOne FCS-1151 - page 56

    IP CamSecure Setting - Camera Camera List Camera Name Goto Web Interface Camera Settings Video Parameter Camera List : The camera(s) connected to the system will show on the panel, click the name of the camera to adjust the setting. Camera Name : Name the camera for your convenience . Goto Web Interface : Go to Website inter face to configure the c ...

  • LevelOne FCS-1151 - page 57

    IP CamSecure 58 Setting - IP Camera S earch Search Search Search Delete Insert Config Search: Click on the Search icon to obtain the Search IP Camera panel. The system will start scanning automatically once the panel is opened; feel free to stop scann ing by clicking on the Stop Scan but ton. Fill in the user name and password fo r each IP camera f ...

  • LevelOne FCS-1151 - page 58

    IP CamSecure Setting - IP Camera IP/Video Server Setting p anel Net w ork Dev ic e Description Network: Fill up the Network field (including Name, IP Addre ss, Http Port, User Name, Password and Protocol) referring to t he instruction provided by the manufacturer . Check “Use DNS” to use domain name instead of IP address. Device: Choose the man ...

  • LevelOne FCS-1151 - page 59

    IP CamSecure 60 Setting – IP Camera Camera List Camera Name Goto Web Interface Camera Settings Video Parameter Camera List: The camera(s) connected to the system will show on the panel, click the name of the camera to adjust the setting. Camera Name: Name the camera for your convenience. Goto Web Interface: Go to website interface to configure th ...

  • LevelOne FCS-1151 - page 60

    IP CamSecure Setting - I/O Device Module Setting List of devices Input Monitor Output Monitor Module Setting: Name the module device and ID that has been connecting the digital input/output device(s) to your system. Device: This column displays the device(s) already installe d to the system. ID: Select the number of the I/O port to which y ou plug ...

  • LevelOne FCS-1151 - page 61

    IP CamSecure 62 Setting - PTZ Config Basic Setting A d vanced Setting Install the PTZ camera following the instruction of the manufacturer . The PTZ camera is usually connected to the PC with RS-485/RS-422. Check the box on the came ra list to activate the PTZ control function of a PTZ camera. Basic Setting: Select the camera model, com port, baud ...

  • LevelOne FCS-1151 - page 62

    IP CamSecure Setting – Hotline *Hotline is only in IP CamSecure Pro/Pro Plus. Configure the settings of hotlin es, including E-mail and telephone calls, once an unusual event is detected. E-mail: Input the following inf ormation: server, sender’s E-mail address, E -mail’s subject title, and body content. You may click on the Send Test Mail bu ...

  • LevelOne FCS-1151 - page 63

    IP CamSecure 64 Setting - User A ccount User A c count : The administrator may manage the u ser accounts he re. From the list on the right, highlight each account and modify the privilege setting. ...

  • LevelOne FCS-1151 - page 64

    IP CamSecure Setting - Address Book *Address Book is only in IP CamSecure Pro/Pro Plus. A ddress Book : Manage the address book from which you want to give a call or E-mail when an unusual event is detected. ...

  • LevelOne FCS-1151 - page 65

    IP CamSecure 66 Setting Monitor Display Playback Option Camera s List A uto S can Layout Playback Option : Execute Playback on the secondary monitor by checking the box. Make su re to adjust the display setting of your comp uter in advance to avoid system error . Cameras List : The left side displays a list of all cameras; modify the cameras shown ...

  • LevelOne FCS-1151 - page 66

    IP CamSecure Save/Load Configuration The Save/ Load Configuration function allows system users to save any specif ic setting as a cfg (config) file. You may save up se veral different cfg files at any time. Save Configuration: To save a specific setting, go to Config > Save/ Load Configuration > Save. In the popup window, type in th e file na ...

  • LevelOne FCS-1151 - page 67

    IP CamSecure 68 Counting A pplication Step 1 Step 2 Step 3 St a rt Simulation Options Runtime *Counting App lication is only in IP CamSecure P ro/Pro Plus. Step 1 : Check the box of the camera to apply the Counting Applicat ion on it. Step 2 : In Operation section, define the detection zones you want. Drag the cruise to draw Region 1 and Region 2 S ...

  • LevelOne FCS-1151 - page 68

    IP CamSecure Step 4 Log Viewer *IP CamSecure Lite only ha s S y s tem Log option in Log Viewer . Step1 Step 2 Step 3 Unusual Event : Y ou can check out the history of Unusual Event that had been detected by Smart Guard System. Step1 : Choose the type of event you want to check or select “All” on the pull-down menu for all types of events. Step ...

  • LevelOne FCS-1151 - page 69

    IP CamSecure 70 Log Viewer Step 1 Step 2 Step 3 System Log: You can choo se the log type from the drop-down menu, fo llowing is a complete list of all log types: 1. Main Console Startup 2. Main Console Shutdown 3. User Login 4. User Login Failed 5. Start Schedule 6. Stop Schedule 7. Execute Recycle 8. Execute Backup 9. Enable Channel 10. Disable Ch ...

  • LevelOne FCS-1151 - page 70

    IP CamSecure Log Viewer - Counting Application Counting A pplication: Display the history of Countin g Application during a given time period. Step1: Select the channel you want t o check or select “All” from the drop-down menu for all channels. Step 2: You may view events happened on a particular date or during a given time p eriod. To search ...

  • LevelOne FCS-1151 - page 71

    IP CamSecure 72 Log Viewer - Counting Application (Diagram): Counting Application (Diagram): Display the Counting Application data in diagram format. Step1: Select the channel you want t o check or select “All” from the drop-down menu for all channels. Step 2: From the drop-down m enu, set up how you would like the diagram to be displayed. You ...

  • LevelOne FCS-1151 - page 72

    IP CamSecure Backup The backup function saves video record and oth er log information. User may open backup files on any PC with Windows Operation System and operate the full function Playback panel on it. Follow the instructions below to obta in backup files. Step 1 : Click on “New Period” to obtain the Select DateT ime Period panel. Step 2 : ...

  • LevelOne FCS-1151 - page 73

    IP CamSecure 74 Backup Step 4 Step 6 Step 3: Select the data you want to backup by highlighting the time period. Be sides the time-table, you may also set up start time and end time in the Date Time Period section. Step 4: Click on the camera number icon to add camera(s) or click Select All to add all the cameras. Step 5: Check the box of Enable Pr ...

  • LevelOne FCS-1151 - page 74

    IP CamSecure Backup Step 7 Step 7 : Click the Backup icon and you can see the size of the file. Step 8 : Choose the pa t h you want to save the file o r , burn the file into a CD (direct CD burning for W indow s XP only). Step 9 : Select which log information you want to backup (Event Log, System Log and/o r Counter Log) and then click OK. Step 8 S ...

  • LevelOne FCS-1151 - page 75

    IP CamSecure 76 Delete recorded information from the s ystem Step 1: Click on “New Period” t o obtain the Select DateTime Period panel. Step 2: From the record date section, se lect the date you want to delete the file from. You will see color lines appear in the time table implying available data. Red, green, and blue stands for record always, ...

  • LevelOne FCS-1151 - page 76

    IP CamSecure Step 4: Click on the camera num ber icon to add camera(s) or click Select All to add all the cameras. Step 5: Check the box of Enable Preview to get the preview of the video you select. Step 6: Click OK when the settings are complete and go back to the Backup panel. Step 4 Step 6 Step 7: Click on the “Delete” icon and delete the da ...

  • LevelOne FCS-1151 - page 77

    IP CamSecure 78 Network Service There are 3 types of network services: live streamin g server, remote playback server, and 3GPP service. From the Main Console, go to Config > Network Service to obtain the Network Service pan el. *IP CamSecure Lite only ha s Live Streaming in Network Service. Live Streaming Server W hen starting the live streamin ...

  • LevelOne FCS-1151 - page 78

    IP CamSecure Stop: Stop broadcasting live stream video. Maximum Users Port Web serv er Save Log Options : Y ou ma y only adjust the setting when the server is stopped. Port : Assign a port for the clients to connect to your system to the network. Use Default Web Serv er : Activate the Web serv er b y checking the box; clients will be able to watch ...

  • LevelOne FCS-1151 - page 79

    IP CamSecure 80 Live Streaming Server - Black/White List Black / / / / White List IP Field A dd/Dele te A ppl y to A ll Live Streaming Serv ers White List : Check the box to activate W hite List filter . Only IPs from the W hite List are allowed to log-in. Black List : Check the box to act ivate Black List filter . IPs f rom the Black List will be ...

  • LevelOne FCS-1151 - page 80

    IP CamSecure Live Streaming Server – Performance T ot al bi trate Individual Came ra bitrate Live Streaming Server log information ...

  • LevelOne FCS-1151 - page 81

    IP CamSecure 82 Remote Playback Server Kill Clint Kill A ll Clients St a r *Remote Playback is only in IP CamSecure Pro/Pro Plus and there are up to 16 channels displa y e d simultaneo usly . W hen starting the remote playback function of your computer, you allow other people to lo g on to the specific computer and withdraw data files that are stor ...

  • LevelOne FCS-1151 - page 82

    IP CamSecure Port Maximum Users Save Log Options: You may only adjust the se tting when the server is stopped. Port: Assign a port for the clients to conne ct to your system to the network. Maximum Users: Numbe r of connections that are allowed to connect to the Remote Playback Server. One camera video counts as one connection. Save Log: Save the l ...

  • LevelOne FCS-1151 - page 83

    IP CamSecure 84 Remote Playback Server - Black/White List Balck/White List IP Field A dd/Dele te A ppl y to A ll Remote Playback Servers White List : Check the box to activate W hite List filter . Only IPs from the W hite List are allowed to log-in. Black List : Check the box to act ivate Black List filter . IPs f rom the Black List will be blocked ...

  • LevelOne FCS-1151 - page 84

    IP CamSecure Remote Playback Server – Performance T ot al bitra te Individual Came ra bitrate Remote Playback Server log information A bout Click Abou t on the pull-down menu, and then the version of IP CamSecure will show up on the screen. ...

  • LevelOne FCS-1151 - page 85

    IP CamSecure 86 E-Map W ith E-Map, user can find out or track the actual location and alarm status easily and receive instant response when the e vent happens. The arrows and lightening icon on E-Map represent cameras and I/O devices and these icons will turn red once they are t riggered by alarms. To launch E-Map application, simply click on Start ...

  • LevelOne FCS-1151 - page 86

    IP CamSecure Edit mode/ Op erate mod e Switch button Function button Edit Mode To carry out edit function, you need to be in Edit mo de. 6.1.1 Add/Edit /Delete Ma p A dd E- Map: Step 1 : Make sure being in “Edit Mode ” and all devices are connected and inserted. Step 2: Right click on the Map icon in device and map list to obtain the option men ...

  • LevelOne FCS-1151 - page 87

    IP CamSecure 88 Operate mod e/ Edit mod e Switch button 6.1.2 Add/Rota te/Delete Device Indicat or A dd Indica tor: Step 1: Make sure being in Edit mode and a ll devices are connected and inserted. Step 2: Select on the icon “ Map ” which you want ad d device indicator to. Step 3 : Before adding indicato r, ensure that the map you want is displ ...

  • LevelOne FCS-1151 - page 88

    IP CamSecure Triangular indicator Information window. If the Digital Output is from IP camera , the preview window will display live video of the camera. POS – Select it to highlight the POS device wi th green ring on map and display live video of first associated camera on preview window. b.E-Map picture This window will show the map la yer and ...

  • LevelOne FCS-1151 - page 89

    IP CamSecure 90 monitor . Step 1: Click “ Tri angular indicator” to hide the Device and Map/ Preview and Information window on right and left side. Step 2: Click “ ” on right top of the window , an d then get the full screen mode of E-Map. ...

  • LevelOne FCS-1151 - page 90

    IP CamSecure Live Viewer 91 Live V iewer W ith the Liv e Viewer console, you may watch real-tim e video from remote live streaming servers. *There is onl y 1 channel displa y ed in Li ve V iew er in IP CamSecure Lite while there are up to 16 channels displa y e d in IP CamSecure Pro/Pro Plus sim ult aneously . ...

  • LevelOne FCS-1151 - page 91

    IP CamSecure Live Viewer 92 Click on the Setup icon to obtain the Setup panel Name the server Enter the server IP Enter the connecting port of the server Enter the user name and password Check the box to automatically log in the server when starting Live Viewer Test the server first to see if the settings are correct Click “Add” and the sever w ...

  • LevelOne FCS-1151 - page 92

    IP CamSecure Live Viewer Setup Panel—Group You may put different cameras into the same group when utilizing the Live Streaming Server function. Step 1: Go to the Group tab of the L iveView Setting panel. Step 2: Log in to all the servers tha t contain the camera(s) you would like to put into the group(s). Step 3: Click “Insert” to create a ne ...

  • LevelOne FCS-1151 - page 93

    IP CamSecure Live Viewer 94 Minimize Exit Zoom Play / Stop Select a camera(s) from t he server/ camera list on the right and then drag it to where you want the image to be displayed. On the server/ camera list, right click on a camera to connect/ disconnect it. Log In/ Log Out: Select a server or a group and click on the log in/ out icon to access/ ...

  • LevelOne FCS-1151 - page 94

    IP CamSecure Live Viewer Other—View Real-Time Vi deo on the Internet IP of the Server Cameras Log In / Log Out Play / Stop Disconnect Screen Division *There is onl y 1 channel displa y ed in Li ve V iew er via web browser in IP CamSecure Lite while there are up to 4 channels displa y e d in IP CamSecure Pro/Pro Plus simul t aneously . Server IP : ...

  • LevelOne FCS-1151 - page 95

    IP CamSecure DBTools 96 DBT ools The DBTools : Export/impo rt database/files; export configurations and edit stora ge location. Step 1: Execute DBTools from program f iles. Step 2: Enter the password of administrator to login. ...

  • LevelOne FCS-1151 - page 96

    IP CamSecure Export database Step 1: Select the database you want to export. Step 2: Select the destination you want to export. Step 3: Press “Export” to st art to export database. Import database Step 1: Select the database location you want to import. Step 2: Select the installation path you want to import. Step 3: Press “Import” to sta r ...

  • LevelOne FCS-1151 - page 97

    IP CamSecure 98 Export configurations Step 1: Press “Export”. Step 2: Select the location you want to Export and type the name of the configurations. Step 3: Press “Save” to start to impo rt database. Step 1 Step 2 Step 3 ...

  • LevelOne FCS-1151 - page 98

    IP CamSecure Edit storage location If you move the recorded videos to a new directory, to ensure the videos can still be recognized by the Playback system, you should change the original directory. Step 1: Select the original directory in the table. Step 2: Type the new path you want to save the recorded videos. Step 3: Press “Update” to finish ...

  • LevelOne FCS-1151 - page 99

    IP CamSecure 100 Backup The backup function saves video record and oth er log information. Users may open backup files on any PC with Windows Operation System and operate the full function Playback panel on it. Follow the instructions below to obta in backup files. Step 1: Execute DBTools from program f iles. Step 2: Click on “New Period” to ob ...

  • LevelOne FCS-1151 - page 100

    IP CamSecure Step 5 Step 7 Step 8 Step 8: Click the Backup icon to see the size of t he file. Step 9: Choose the path you want to save the file or burn the file into a CD (direct CD burning fo r W indow s XP only). Step 10: Select the log information you would like to backup (Event Log, System Log and/or Counter Log) and then click OK. Step 8 Step ...

  • LevelOne FCS-1151 - page 101

    IP CamSecure 102 Delete recorded information f rom the system Step 1: Click on “New Period” to obtain the Select DateTime Period panel. Step 2: From the record date section, sele ct the date you want to delete the file from. You will see color lines appear in the time table implying available data. Red, green, and blue stands for record always, ...

  • LevelOne FCS-1151 - page 102

    IP CamSecure Step 4: Click on the came ra number icon to add camera(s) or click Select All to add all the cameras. Step 5: Check the box of E nable Preview to get the preview of the video you select. Step 6: Click OK when the settings are complete and go b ack to the Backup panel. Step 4 Step 6 Step 7: Click on the “Delete” icon and delete the ...

  • LevelOne FCS-1151 - page 103

    IP CamSecure 104 Appendix A - 3GPP Ser vice How to set up 3GPP strea ming conne ction (using BenQ-Siemen s mobile phones) System Configur ation LEVELONE I P CamSecure server v1. xx CPU: Intel c ore2 Duo 1.86 GHz Memory: 512 DDR R AM Ethernet: Realtek RTL8168/ 8111 PCI -E Hard Disk: 160GB Graphic card : ASUS Ext reme AX550 Operating System : Window ...

  • LevelOne FCS-1151 - page 104

    IP CamSecure 1.2 Configura tion from 3G Mobile Phone 1.2.1 BenQ-Sie mens E8 1 Step 1: Go to Menu, then Internet Step 2 : Selec t Bookmarks Step 3: Add New Bookma rk Step 4: Config ure the Adress settin g as the following examp le. Ex: rtsp://61 .216.97.69:554 / media 00 .3gp 61.216.97.69 :554 is th e IP address of LEV ELONE I P CamSecure system Por ...

  • LevelOne FCS-1151 - page 105

    IP CamSecure 106 Step 1: Connect GPRS Step 2: Down load and i nstall the [PLATFORM4] softwa re. Step 3: Exec ute th e Main Console. Step 4: Press th e [Config]  [Netw ork Service]  [S tart] Step 5: Open [PLATFORM 4], press th e button framed b y red into Opt ion Step 6: [Open U RL] ent er the RTSP add ress of the camera EX: rtsp://61.216 .97. ...

  • LevelOne FCS-1151 - page 106

    IP CamSecure Appendix B – PDA / Smart Phone Cl ient PDA / SP (Smart Phone ) Client are only appl ied for devices w ith W indows Mobil e 5.0 platform o r above. See the sect ions below to find how to insta ll and execute PD A / SP Client. Note: 1. The different betw een Smart Phone and PD A Client is navigation of operat ion, user can only c ontro ...

  • LevelOne FCS-1151 - page 107

    IP CamSecure 108 1.2.2 Execute and Login Step 1 : Make sure your P DA/Smart Ph one device i s connect ed to ne twork, and t hen go t o Start - Programs - LEVELONE PD A/Smart Ph one Client to execute applic ation. Step 2 : In sert Address, Por t, Name and Password of the server and clic k on to login . 1.3 PDA/Smar t Phone Cli ent Overview There are ...

  • LevelOne FCS-1151 - page 108

    IP CamSecure Note: The Screen Division and Refre sh option c ould help to quick fin d the chan nel. Live Video Dis play: Live View panel could display “li ve video”, cont rol PTZ, and sn apshot . Click to go back camera li st. PTZ Control: Clic k on PT Control Pa nel and Zoom Out/I n to cont rol physical PTZ cam era or adju st digi tal PTZ unde ...

  • LevelOne FCS-1151 - page 109

    IP CamSecure 1 1 0 Gray icon in dicat es the norma l stat us of DI/DO d evices. Red icon indicat es the alarm status of DI /DO devi ces. Green ic on indica tes the synchr onizat ion process. 1.3.3 System Info Display th e server and cl ient i nformati on. Server informati on includes ad dress, po st, and versi on. Client informati on includes logi ...

  • LevelOne FCS-1151 - page 110

    IP CamSecure 1 11 Appendix C – I-Phone Br owser LEVELONE Live Streamin g service co uld handl e the request form I-Ph one browser . Below sect ion will guide hot to use th is feature w ith I-Ph one device . 1.1 Configura tion from LE VELONE ser ver Step 1: Go to “ Config” a nd selec t “Netw ork Service” Step 2: Select “Live Strea ming? ...

Manufacturer LevelOne Category Security camera

Documents that we receive from a manufacturer of a LevelOne FCS-1151 can be divided into several groups. They are, among others:
- LevelOne technical drawings
- FCS-1151 manuals
- LevelOne product data sheets
- information booklets
- or energy labels LevelOne FCS-1151
All of them are important, but the most important information from the point of view of use of the device are in the user manual LevelOne FCS-1151.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals LevelOne FCS-1151, service manual, brief instructions and user manuals LevelOne FCS-1151. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product LevelOne FCS-1151.

Similar manuals

A complete manual for the device LevelOne FCS-1151, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use LevelOne FCS-1151 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of LevelOne FCS-1151.

A complete LevelOne manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual LevelOne FCS-1151 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the LevelOne FCS-1151, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the LevelOne FCS-1151, that we can find in the current document
3. Tips how to use the basic functions of the device LevelOne FCS-1151 - which should help us in our first steps of using LevelOne FCS-1151
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with LevelOne FCS-1151
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of LevelOne FCS-1151 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning LevelOne FCS-1151?

Use the form below

If you did not solve your problem by using a manual LevelOne FCS-1151, ask a question using the form below. If a user had a similar problem with LevelOne FCS-1151 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)