English dropdown-ico

Manual Alvarez N/A

15 pages 0.86 mb
Download

Go to site of 15

Summary
  • Alvarez N/A - page 1

    1 S225 REPAIR MANUAL S225 REPAIR MANUAL ...

  • Alvarez N/A - page 2

    2 These instructions are intended to help restore any ailing S225 Passive Loudspeaker back to factory working conditions. They show how to remove and replace the drivers. Please contact Mackie Technical Support (1-800-898-3211) to receive a Service Request Number and Order Number for parts needed for this restoration. They will also help you determ ...

  • Alvarez N/A - page 3

    3 Bottom woofer replacement: 1 1 Five screws need to be removed from each side of the grill (ten screws total) using the phillips head screwdriver. A fl at head screwdriver may aid in loosening the grill if it is sticking. 8 8 1 1 2 2 3 3 4 4 5 5 6 6 7 7 9 9 10 10 2 2 Keep the ten screws in a safe place. 1 1 3 3 2 2 4 4 3 3 Four screws need to be ...

  • Alvarez N/A - page 4

    4 4 4 Carefully begin to remove the woofer. This woofer has a tendency to want to pop out, so please be sure to hold the woofer in place with your free hand while removing the screws with the other hand. Caution: The woofer is approximately 10 pounds with the weight unevenly distributed. Bottom woofer replacement continued: 5 5 The positive (solid ...

  • Alvarez N/A - page 5

    5 6 6 The picture above shows what the S225 looks like with the grill and bottom woofer removed. Place the new woofer (part #0010658) where the old one was. Follow the same steps as above, but backwards 5 to 1. Power up the S225 and the new woofer should now be pumping out glorious lows. Awesome, you just replaced a 15” woofer! Bottom woofer repl ...

  • Alvarez N/A - page 6

    6 Top woofer replacement: 1 1 Five screws need to be removed from each side of the grill (ten screws total) using the phillips head screwdriver. A fl at head screwdriver may aid in loosening the grill if it is sticking. 8 8 1 1 2 2 3 3 4 4 5 5 6 6 7 7 9 9 10 10 2 2 Keep the ten screws in a safe place. 1 1 3 3 2 2 4 4 3 3 Four screws need to be rem ...

  • Alvarez N/A - page 7

    7 Top woofer replacement continued: 4 4 Carefully begin to remove the woofer. This woofer has a tendency to want to pop out, so please be sure to hold the woofer in place with your free hand while removing the screws with the other hand. Caution: The woofer is approximately 10 pounds with the weight unevenly distributed. 5 5 The positive (solid yel ...

  • Alvarez N/A - page 8

    8 Top woofer replacement continued: 6 6 The picture above shows what the S225 looks like with the grill and top woofer removed. Place the new woofer (part #0010658) where the old one was. Follow the same steps as above, but backwards 5 to 1. Power up the S225 and the new woofer should now be pumping out glorious lows. Awesome, you just replaced a 1 ...

  • Alvarez N/A - page 9

    9 High Frequency Driver replacement: 1 1 Five screws need to be removed from each side of the grill (ten screws total) using the phillips head screwdriver. A fl at head screwdriver may aid in loosening the grill if it is sticking. 8 8 1 1 2 2 3 3 4 4 5 5 6 6 7 7 9 9 10 10 2 2 Keep the ten screws in a safe place. 3 3 Four screws and fl at washers ...

  • Alvarez N/A - page 10

    10 4 4 Carefully begin to remove the entire horn assembly (with the high frequency driver still attached). A fl at head screwdriver may aid in loosening the horn assembly by prying between it and the cabinet. Hold the horn assembly in place with one hand while prying around the edge with your free hand. Caution: The horn weighs about 5 pounds, and ...

  • Alvarez N/A - page 11

    11 High Frequency Driver replacement continued: 7 7 Four nuts and eight washers may be removed from the driver using the 8mm open end wrench. Turn counter- clockwise to loosen and remove, clockwise to tighten. The other three are located around the horn assembly. Lift the horn up as the nuts are loosened. It cannot be removed otherwise. Notice that ...

  • Alvarez N/A - page 12

    12 High Frequency Driver replacement continued: 10 10 This is what the high frequency driver looks like removed from the horn assembly. Four headless screws need to be removed from the driver. Pliers could help if the screws are too tight. Turn counter- clockwise to loosen and remove, clockwise to tighten. 11 11 Keep the four headless screws in a s ...

  • Alvarez N/A - page 13

    13 3 3 The horn assembly is shown above with the high frequency driver circled. Four screws need to be removed from the driver using the 3mm allen wrench. 4 4 Keep the four screws in a safe place. 5 5 The diaphragm and plate adapter are easily removed from the horn assembly. Notice the terminal locations in relation to the indents of the high frequ ...

  • Alvarez N/A - page 14

    14 7 7 This is what the plate adapter (left) and diaphragm (right) both look like. Place the new diaphragm (part # coming soon) where the old one was. Follow the same steps as above, but backwards 6 to 1. Power up the S225 and the new diaphragm should now be pumping out those highs again. Sweet, you just replaced a diaphragm! Diaphragm replacement ...

  • Alvarez N/A - page 15

    15 This page left blank intentionally ...

Manufacturer Alvarez Category Car Speaker

Documents that we receive from a manufacturer of a Alvarez N/A can be divided into several groups. They are, among others:
- Alvarez technical drawings
- N/A manuals
- Alvarez product data sheets
- information booklets
- or energy labels Alvarez N/A
All of them are important, but the most important information from the point of view of use of the device are in the user manual Alvarez N/A.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Alvarez N/A, service manual, brief instructions and user manuals Alvarez N/A. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Alvarez N/A.

Similar manuals

A complete manual for the device Alvarez N/A, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Alvarez N/A by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Alvarez N/A.

A complete Alvarez manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Alvarez N/A - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Alvarez N/A, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Alvarez N/A, that we can find in the current document
3. Tips how to use the basic functions of the device Alvarez N/A - which should help us in our first steps of using Alvarez N/A
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Alvarez N/A
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Alvarez N/A in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Alvarez N/A?

Use the form below

If you did not solve your problem by using a manual Alvarez N/A, ask a question using the form below. If a user had a similar problem with Alvarez N/A it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)