English dropdown-ico

Manual Hitachi CP-X265

66 pages 5.5 mb
Download

Go to site of 66

Summary
  • Hitachi CP-X265 - page 1

    1 Projector CP-X256/CP-X265 User's Manual – Oper ating Guide Thank you for purchasing this projector . WARNING ► Before using this product, please read the "User's Manual - Safety Guide" and related manuals to ensure the proper use of this product. After reading them, store them in a safe place for future reference. About th ...

  • Hitachi CP-X265 - page 2

    2 About this manual . . . . . . . . . . 1 C o n t e n t .................. 2 Projector features . . . . . . . . . . 3 Prepar ations . . . . . . . . . . . . . . 3 About contents of package . . . . . . . .3 Fastening the lens cover . . . . . . . . . .3 Par t names . . . . . . . . . . . . . . . 4 P r o j e c t o r ...................... 4 Control butt ...

  • Hitachi CP-X265 - page 3

    3 F astening the lens co ver T o avoid losing the lens cover , please fasten it the lens cap to the projector using the strap. 1. Fix the strap to the strap ring of the lens cover . 2. Put the strap into the groove on the rivet. 3. Push the rivet into the strap hole. Projector features / Prepar ations Projector features This projector is used to pr ...

  • Hitachi CP-X265 - page 4

    4 Par t names Part names Lens (  17 ) Filter cover (  55 ) (Air lter and intake vent are inside.) Elevator button (  9 ) Elevator foot (  9 ) Remote sensor (  16 ) Zoom ring (  19 ) Focus ring (  19 ) V ent Projector Lamp cover (  54 ) (Lamp unit is inside.) Bottom side Speaker Lens cover (  3 ) Security bar (  10 ) ...

  • Hitachi CP-X265 - page 5

    5 AC inlet (  14 ) Power switch (  17 ) Elevator button (  9 ) COMPONENT VIDEO ports (  13 ) Y C B /P B C R /P R S-VIDEO port (  13 ) VIDEO port (  13 ) CONTROL port (  12) Elevator foot (  9 ) Rear-Left side Ports (See below .) V ent AUDIO OUT port (  12 ) Ports AUDIO IN2 port (  12 ) (In the default setting, the AUDI ...

  • Hitachi CP-X265 - page 6

    6 SEARCH button (  19 ) RGB button (  18 ) VIDEO button (  19 ) ASPECT button (  19 ) HOME button (  23 ) MAGNIFY ON button (  21 ) OFF button (  21 ) END button (  23 ) FREEZE button (  22 ) POSITION button (  20 ) ESC button (  23 ) Par t names R emote control Battery cover (  15 ) (on the back) ST ANDBY/ON but ...

  • Hitachi CP-X265 - page 7

    7 Setting up WARNING ► Place the projector in a stable position horizontally . A fall or a turnover could cause an injury and/or damage to the projector . Then using damaged projector could result in a re and/or an electric shock. • Do not place the projector on an unstable, slant or vibrant surface such as a wobbly or inclined stand. • Do ...

  • Hitachi CP-X265 - page 8

    8 Ar rangement Refer to the illustrations and tables below to determine the screen size and projection distance. The values shown in the table are calculated for a full size screen: 1024×768 (a) The screen size (diagonal) (b) Distance from the projector to the screen (±10%) (c) The height of the screen (±10%) Setting up 4:3 (a) 16:9 (a) (a) Scre ...

  • Hitachi CP-X265 - page 9

    9 Adjusting the projector's eleva tor CA UTION ►If you press the elevator button without holding the projector , the projector might crash down, overturn, smash your ngers and possibly result in malfunction. T o prevent damaging the projector and injuring yourself, always hold the projector whenever using the elevator buttons to adjust th ...

  • Hitachi CP-X265 - page 10

    10 Setting up Using the Security Bar WARNING ►Do not use the security bar to prevent the projector from falling. Dropping or knocking over the projector may cause damage or injury . A commercial anti-theft chain or wire can be attached to the security bar on the projector . 1. How to attach An anti-theft chain or wire can be attached as shown in ...

  • Hitachi CP-X265 - page 11

    1 1 Setting up Connecting your de vices NO TE • Whenever attempting to connect a laptop computer to the projector , be sure to activate the laptop’s RGB external image output (set the laptop to CRT display or to simultaneous LCD and CRT display). For details on how this is done, please refer to the instruction manual of the corresponding laptop ...

  • Hitachi CP-X265 - page 12

    12 LAN Y R L AUDIO IN3 AUDIO IN1 AUDIO OUT USB RGB OUT AUDIO IN2 VIDEO S-VIDEO C B / P B C R / P R CONTROL RGB IN2 RGB IN1 K LAN Y R L AUDIO IN3 AUDIO IN1 AUDIO OUT USB RGB OUT AUDIO IN2 VIDEO S-VIDEO C B / P B C R / P R CONTROL RGB IN2 RGB IN1 K LAN Y R L AUDIO IN3 AUDIO IN1 AUDIO OUT USB RGB OUT AUDIO IN2 VIDEO S-VIDEO C B / P B C R / P R CONTROL ...

  • Hitachi CP-X265 - page 13

    13 LAN Y R L AUDIO IN3 AUDIO IN1 AUDIO OUT USB RGB OUT AUDIO IN2 VIDEO S-VIDEO C B / P B C R / P R CONTROL RGB IN2 RGB IN1 K LAN Y R L AUDIO IN3 AUDIO IN1 AUDIO OUT USB RGB OUT AUDIO IN2 VIDEO S-VIDEO C B / P B C R / P R CONTROL RGB IN2 RGB IN1 K LAN Y R L AUDIO IN3 AUDIO IN1 AUDIO OUT USB RGB OUT AUDIO IN2 VIDEO S-VIDEO C B / P B C R / P R CONTROL ...

  • Hitachi CP-X265 - page 14

    14 C R /P R C B /P B A UDIO IN 2 A UDIO IN 1 RGB IN 1 RGB IN 2 LA N CO NT R OL RG B OU T A UDIO OU T US B VI D EO S-VI D EO A C IN Connecting pow er suppl y WARNING ► Please use extra caution when connecting the power cord, as incorrect or faulty connections may result in re and/or electrical shock. • Only use the power cord that came with t ...

  • Hitachi CP-X265 - page 15

    15 Putting batteries WARNING ► Always handle the batteries with care and use them only as directed. Battery may explode if mistreated. Do not recharge, disassemble or dispose of in re. And also improper use may result in cracking or leakage, which could result in re, injury and/or pollution of the surrounding environment. • Be sure to use ...

  • Hitachi CP-X265 - page 16

    16 Using the remote contr ol CA UTION ► Be careful in handling the remote control. • Do not drop or expose the remote control to physical impact. • Do not get the remote control wet or place it on wet objects. It may result in malfunction. • Rem ov e the b at ter ie s fro m th e r em ot e c on tr ol an d sto re t hem i n a s af e pla ce i f ...

  • Hitachi CP-X265 - page 17

    17 C R /P R C B /P B A UDIO IN 2 A UDIO IN 1 RGB IN 1 RGB IN 2 LA N CO NT R OL RG B OU T A UDIO OU T US B VI D EO S-VI D EO A C IN Po wer on/of f Power on/off WARNING ► When the power is on, a strong light is emitted. Do not look into the lens of projector . Also do not peep at the inside of projector through a hole. NO TE • T ur n t he p owe r ...

  • Hitachi CP-X265 - page 18

    18 Operating Operating Adjusting the v olume 1. Press the VOLUME button on the remote control. A dialog will appear on the screen to aid you in adjusting the volume. 2. Use the cursor buttons ▲/▼ to adjust the volume. T o close the dialog and complete the operation, press the VOLUME button again. Even if you don’t do anything, the dialog will ...

  • Hitachi CP-X265 - page 19

    19 Operating Adjusting the zoom and f ocus 1. Use the zoom ring to adjust the screen size. 2. Use the focus ring to focus the picture. Selecting an aspect ratio 1. Press the ASPECT button on the remote control. Each time you press the button, the projector switches the mode for aspect ratio in turn.  For an RGB signal NORMAL  4:3  16:9  ...

  • Hitachi CP-X265 - page 20

    20 Operating Using the automatic adjustment f eature 1. Press the AUTO button on the remote control.  For an RGB signal The vertical position, the horizontal position, the horizontal phase and the horizontal size will be automatically adjusted. And the aspect ratio will be automatically set to default. Make sure that the application window is se ...

  • Hitachi CP-X265 - page 21

    21 Using the magnify feature 1. Press the ON button of MAGNIFY on the remote control. The “MAGNIFY” indication will appear on the screen (although the indication will disappear in several seconds with no operation), and the projector will enter the MAGNIFY mode. 2. Use the cursor buttons ▲/▼ to adjust the zoom level. T o move the zoom area, ...

  • Hitachi CP-X265 - page 22

    22 F r eezing the scr een 1. Press the FREEZE button on the remote control. The “FREEZE” indication will appear on the screen, and the projector will enter the FREEZE mode. T o exit the FREEZE mode and restore the screen to normal, press the FREEZE button again. ● The projector automatically exits the FREEZE mode when the input signal changes ...

  • Hitachi CP-X265 - page 23

    23 Operating Operating the computer screen HOME PAGE UP PAGE DOWN END VIDEO RGB SEARCH FREEZE OFF ON MAGNIFY ASPECT AUTO BLANK MUTE VOLUME KEYSTONE MY BUTTON POSITION 1 2 ESC ENTER MENU RESET A vailable function Remote control operation Move pointer Use ▲, ▼, ◄, ► buttons Left click with mouse Press ENTER button Right click with mouse Press ...

  • Hitachi CP-X265 - page 24

    24 Multifunctional settings Multifunctional settings Using the menu function This projector has the following menus: PICTURE, IMAGE, INPUT , SETUP , SCREEN, OPTION, NETWORK, and EASY MENU. EASY MENU consists of functions often used, and the other menus are classied into each purpose. Each of these menus is operated using the same methods. The ba ...

  • Hitachi CP-X265 - page 25

    25 EASY Menu EASY Menu Item Description ASPECT Using the buttons ◄/► switches the mode for aspect ratio. See the ASPECT item in the IMAGE menu (  30 ). AUTO KEYSTONE EXECUTE Using the button ► executes the auto keystone function. See the AUTO KEYST ONE EXECUTE item in the SETUP menu (  35 ). This function will be unavailable when T rans ...

  • Hitachi CP-X265 - page 26

    26 EASY Menu Item Description CONTRAST Using the buttons ◄/► adjusts the contrast. See the CONTRAST item in the PICTURE menu (  27 ). COLOR Using the buttons ◄/► adjusts the strength of whole color . See the COLOR item in the PICTURE menu (  28 ). TINT Using the buttons ◄/► adjusts the tint. See the TINT item in the PICTURE menu ( ...

  • Hitachi CP-X265 - page 27

    27 PICTURE Menu PICTURE Menu Item Description BRIGHTNESS Using the buttons ▲/▼ adjusts the brightness. : Light ó Dark CONTRAST Using the buttons ▲/▼ adjusts the contrast. : Strong ó Weak GAMMA Using the buttons ▲/▼ switches the GAMMA mode. #1 DEF AUL T ó #1 CUSTOM ó #2 DEF AUL T ó #2 CUSTOM ó #3 DEF AUL T #5 CUSTOM ó #5 DEF AUL T ...

  • Hitachi CP-X265 - page 28

    28 Item Description COLOR TEMP Using the buttons ▲/▼ switches the mode of color temperature. T o adjust CUSTOM Selecting the CUSTOM and then pressing the button ► or the ENTER button displays a dialog to aid you in adjusting the OFFSET and/or GAIN of the CUSTOM mode. OFFSET adjustments change the color intensity on the whole tones of the test ...

  • Hitachi CP-X265 - page 29

    29 PICTURE Menu Item Description MY MEMOR Y Selecting a mode of MY MEMOR Y using the buttons ▲/▼ and then pressing the button ► or the ENTER button performs each f unction. LOAD1 ó LOAD2 ó LOAD3 ó LOAD4 SA VE4 ó SA VE3 ó SA VE2 ó SA VE1 This projector has 4 numbered memories for adjustment data. Performing the LOAD1, LOAD2, LOAD3 or LOA ...

  • Hitachi CP-X265 - page 30

    30 IMAGE Menu IMAGE Menu Item Description ASPECT Using the buttons ▲/▼ switches the mode for aspect ratio. For an RGB signal NORMAL ó 4:3 ó 16:9 ó SMALL For a video signal, s-video signal or component video signal 4:3 ó 16:9 ó 14:9 ó SMALL For a no signal 4:3 (xed) • The NORMAL mode keeps the original aspect ratio of the signal. OVER ...

  • Hitachi CP-X265 - page 31

    31 IMAGE Menu Item Description H SIZE Using the buttons ▲/▼ adjusts the horizontal size. Large ó Small • This item can be selected only for an RGB signal. • When this adjustment is excessive, the picture may not be displayed correctly . In such a case, please reset the adjustment by pressing the RESET button on the remote control during th ...

  • Hitachi CP-X265 - page 32

    32 INPUT Menu INPUT Menu Item Description PROGRESSIVE Using the buttons ▲/▼ switches the progress mode. TV ó FILM ó TURN OFF • This function is performed only for an interlaced signal of a VIDEO inpu t, an S -VIDEO inp ut or COM PONE NT VIDEO in put of 525i (4 80i) or 625i (576i) signal. • When TV or FILM is selected, the screen image wil ...

  • Hitachi CP-X265 - page 33

    33 Item Description COMPONENT Using the buttons ▲/▼ switches the function of COMPONENT VIDEO port. COMPONENT ó SCAR T RGB When the SCART RGB is selected, the COMPONENT VIDEO port function as a port for a SCART RGB signal input and VIDEO port function as a port for SCART RGB sync input. A SCART adapter and SCART cable realize a SCART RGB input ...

  • Hitachi CP-X265 - page 34

    34 INPUT Menu Item Description RESOLUTION *2 The resolution for the RGB1 and RGB2 input signals can be set on this projector . (1) In the INPUT menu select RESOLUTION using the ▲/▼ buttons and press the ► button. The RESOLUTION menu will be displayed. (2) In the RESOLUTION menu select the resolution you wish to display using the ▲/▼ butto ...

  • Hitachi CP-X265 - page 35

    35 SETUP Menu SETUP Menu Item Description AUTO KEYSTONE EXECUTE Selecting this item performs the Automatic keystone distortion correction. Projector automatically corrects vertical keystone distortion due to the (forward/backward) setup angle by itself. • This function will be executed only once when selected in the Menu. When the slant of the pr ...

  • Hitachi CP-X265 - page 36

    36 SETUP Menu SETUP Menu (continued) Item Description MIRROR Using the buttons ▲/▼ switches the mode for mirror status. NORMAL ó H:INVERT ó V :INVERT ó H&V :INVERT If T ransition Detector is TURN ON and MIRROR status is changed, T ransition Detector Alarm (  48 ) will be displayed when projector is restarted after the power switch is ...

  • Hitachi CP-X265 - page 37

    37 SCREEN Menu SCREEN Menu Item Description LANGUAGE Using the buttons ▲/▼ switches the OSD (On Screen Display) language. SUOMI ó POLSKI ó TÜRKÇE ENGLISH ó FRANÇAIS ó DEUTSCH ó ESP AÑOL ó IT ALIANO NORSK ó NEDERLANDS ó PORTUGUÊS ó 日本語 ó ó ó SVENSKA ó MENU POSITION Using the buttons ◄/►/▲/▼ adjusts the menu positi ...

  • Hitachi CP-X265 - page 38

    38 SCREEN Menu Item Description ST ART UP Using the buttons ▲/▼ switches the mode for the start-up screen. The start-up screen is a screen displayed when no signal or an unsuitable signal is detected. MyScreen ó ORIGINAL ó TURN OFF MyScreen is a screen you can register as a desired screen.The ORIGINAL screen is the existing standard screen. W ...

  • Hitachi CP-X265 - page 39

    39 SCREEN Menu Item Description MESSAGE Using the buttons ▲/▼ turns on/off the message function. TURN ON ó TURN OFF When the TURN ON is selected, the following message function works. “AUTO IN PROGRESS” while automatically adjusting ”NO INPUT IS DETECTED” ”SYNC IS OUT OF RANGE” "Searching….” while searching for the input ? ...

  • Hitachi CP-X265 - page 40

    40 OPTION Menu OPTION Menu Item Description AUTO SEARCH Using the bu ttons ▲/▼ t urns on/of f the automatic sig nal search f unction. TURN ON ó TURN OFF When the TURN ON is selected, detecting no signal automatically cycles through input ports in the following order . The search is started from the current port. Then when an input is found, th ...

  • Hitachi CP-X265 - page 41

    41 Item Description AUTO OFF Using the buttons ▲/▼ adjusts the time to count down to automatically turn the projector off. Long (max. 99 minutes) ó Short (min. 0 minute = DISABLE) AUTO OFF ENABLE 1 AUTO OFF DISABLE 0 When th e time i s set t o 0, th e proje ctor is not tur ned of f automatica lly . When the time is set to 1 to 99, and when the ...

  • Hitachi CP-X265 - page 42

    42 Item Description SERVICE Selecting this item displays the SERVICE menu. Select an item using the buttons ▲/▼, and press the button ► or the ENTER button on the remote control to execute the item. F AN SPEED ó AUTO ADJUST ó GHOST ó FIL TER MESSAGE ó KEY LOCK F ACTORY RESET ó INFORMA TION ó REMOTE FREQ. F AN SPEED Using the buttons ▲ ...

  • Hitachi CP-X265 - page 43

    43 Item Description SERVICE REMOTE FREQ. Use the ▲/▼ button to change the Projector's remote sensor setting (  16 ). 1:NORMAL ó 2:HIGH Items with a checkmark are on. The factory default setting is for both 1:NORMAL and 2:HIGH to be on. If the remote control does not function correctly set the this to either only 1 or only 2 as describe ...

  • Hitachi CP-X265 - page 44

    44 Item Description SECURITY This projector is equipped with security functions. User registration is required before using the security functions. Please contact your local dealer . 1. Using Security Features 1.1 Inputting the P ASSWORD 1.1-1 Use the ▲/▼ buttons on the OPTION menu to select SECURITY and press the ► button. The ENTER P ASSWOR ...

  • Hitachi CP-X265 - page 45

    45 Item Description SECURITY 1.3 If you have forgotten your P ASSWORD 1.3-1 Follow the procedure in 1.1-1 to display the ENTER P ASSWORD BOX. 1.3-2 While the ENTER P ASSWORD BOX is displayed, press and hold the RESET button on the remote control for about 3 seconds or press and hold the INPUT and ► buttons on the projector for about 3 seconds. Th ...

  • Hitachi CP-X265 - page 46

    46 Item Description SECURITY 2.2-4 Move t he cu rsor t o the righ t side of t he CHE CK P ASSWORD BOX and press the ► button to display the P ASSWORD for about 20 seconds, please make note of the P ASSWORD during this time. After the P ASSWORD has displayed for about 20 seconds the screen will return to the MyScreen P ASSWORD on/off menu. Pressin ...

  • Hitachi CP-X265 - page 47

    47 Item Description SECURITY 3.1-3 Input a 4 part PIN Code using the ▲/▼/◄/► /RGB and INPUT buttons. A CONFIRMA TION BOX will appear . Reenter the same PIN Code. This will complete the PIN Code registration. NOTE: If there is no key input for about 55 seconds while the PIN BOX or the CONFIRM A TION BOX are displayed the menu will close. If ...

  • Hitachi CP-X265 - page 48

    48 Item Description SECURITY 4. Using the T ransition Detector Function While the T ransition Detector function is ON, when power switch is started to supply to the projector , it might react as below . • T ransition Detector alarm shown below might appear on screen, if the projector has been moved or re-installed. • T ransition Detector alarm ...

  • Hitachi CP-X265 - page 49

    49 Item Description SECURITY 4.3 Setting the T ransition Detector off 4.3-1 Follow the procedure in 4.1-1 to display the T ransition Detector on/off menu. 4.3-2 Select TURN OFF to display the ENTER P ASSWORD BOX (large). Enter the registered P ASSWORD and the screen will return to the T ransition Detector on/off menu. If an incorrect P ASSWORD is i ...

  • Hitachi CP-X265 - page 50

    50 NETWORK Menu  5'.'%6  +2#&&4'55  57$0'6/#5-  &#6'#0&6+/'  &*%2  67401(( &'(#7.6)#6'9#; 6+/'&+(('4'0%' G 5*16  +0(14/#6+10  5'48+%' /'07=4)$? 2+%674&apo ...

  • Hitachi CP-X265 - page 51

    51 NETWORK Menu Item Operation DEF AUL T GA TEW A Y Input the DEF AUL T GA TEWA Y : Use the ▲/▼/◄/► buttons to enter the DEF AUL T GA TEW A Y (a node on a compu ter net work th at serv es as an access point to another network) address. This function is available as long as DHCP is set to “TURN OFF”. TIME DIFFERENCE Input the TIME DIFFER ...

  • Hitachi CP-X265 - page 52

    52 NETWORK Menu Item Operation INFORMA TION INFORMA TION display : Use the ► or ENTER buttons to view network information and conrm settings. ~Note~ • Only the rst 16 characters of the projector name are displayed. • When the voltage level of battery for built in clock decreases, set time may become incorrect even though accurate date a ...

  • Hitachi CP-X265 - page 53

    53 Maintenance Maintenance Lamp WARNING HIGH VOL T AGE HIGH TEMPERA TURE HIGH PRESSURE ► The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you ...

  • Hitachi CP-X265 - page 54

    54 R G B I N 2 R G B O U T C O N T RO L A U D I O IN 2 Y L C B / P B C R / P R A U D I O I N 1 L A N VO LT AG E 7 0 V P O W E R 2 8 0 W AU D IO O U T U S B S - V I D E O C R /P R C B /P B A UDIO IN 2 A UDIO IN 1 RGB IN 1 RGB IN 2 LA N CO NT R OL RG B OU T A UDIO OU T US B VI D EO S-VI D EO A C IN Lamp (continued) A lamp has a nite product life. ...

  • Hitachi CP-X265 - page 55

    55 If the air lter becomes clogged by dust or the like, internal temperatures rise and could cause a re, a burn and/or malfunction to the projector . When the indicators or a message prompts you to clean the air filter , clean the air filter as soon as possible. Please check and clean the air filter periodically , even if there is no message. ...

  • Hitachi CP-X265 - page 56

    56 Maintenance 4. Apply a vacuum cleaner to the air lter and the lter cover . Please replace the air lter when it is damaged or too soiled. 5. Replace the air lter in its original position. Secure the air lter in place by pressing each of the six locations. Make sure there is no dust or dirt remaining after the cover is in place. If ...

  • Hitachi CP-X265 - page 57

    57 A UDIO IN 3 A UDI O IN 2 C B /P B C R /P R A UDI O IN 1 RG B IN 1 RG B IN 2 LA N CONT ROL RG B OU T A UDI O OU T US B VI D EO Y S-VIDE O CLOS E OP E N 1. T urn the projector off, and unplug the power cord. Allow the projector to cool sufciently . 2. After making sure that the projector has cooled adequately , slowly turn over the projector , ...

  • Hitachi CP-X265 - page 58

    58 Maintenance WARNING ►Before caring, make sure the power switch is off and the power cable is not plugged in, and then allow the projector to cool sufciently . The care in a high temperature state of the projector could cause a burn and/or malfunction to the projector . ►Never try to care for the inside of the projector personally . Doing ...

  • Hitachi CP-X265 - page 59

    59 T roubleshooting R elated messages When the unit's power is on, messages such as those shown below may be displayed. When any such message is displayed on the screen, please follow the instructions described below . If the same message is displayed after the remedy , or if a message other than the following appears, please contact your deal ...

  • Hitachi CP-X265 - page 60

    60 T r oubleshooting R e gar ding the indicator lamps Lighting and ashing of the POWER indicator , the LAMP indicator , and the TEMP indicator have the meanings as described in the table below . Please follow the instructions within the table. If the same indication is displayed after the remedy , or if an indication other than the following is ...

  • Hitachi CP-X265 - page 61

    61 T r oubleshooting Regarding the indicator lamps (continued) POWER indicator LAMP indicator TEMP indicator Description Blinking In Red or Lighting In Red T urned off Blinking In Red The cooling fan is not operating. Please turn the power off, and allow the projector to cool down at least 20 minutes. After the projector has sufciently cooled do ...

  • Hitachi CP-X265 - page 62

    62 T r oubleshooting Phenomena that may be easy to be mistak en for machine def ects WARNING ► Never use the projector if abnormal operations such as smoke, strange odor , excessive sound, damaged casing or elements or cables, penetration of liquids or foreign matter , etc. should occur . In such cases, immediately turn off the power switch and t ...

  • Hitachi CP-X265 - page 63

    63 Pheno mena tha t may be easy to b e mi stak en fo r ma chin e def ects (co ntinu ed) Phenomenon Cases not involving a machine defect Reference page Sound does not come out. The signal cables are not correctly connected. Correctly connect the audio cables. 12,13 The MUTE function is working. Restore the sound pressing the MUTE or VOLUME button on ...

  • Hitachi CP-X265 - page 64

    64 Pheno mena tha t may be easy to b e mi stak en fo r ma chin e def ects (co ntinu ed) Phenomenon Cases not involving a machine defect Reference page Pictures appear dark. The brightness and/or contrast are adjusted to an extremely low level. Adjust BRIGHTNESS and/or CONTRAST settings to a higher level using the menu function. 25, 26 The WHISPER f ...

  • Hitachi CP-X265 - page 65

    65 Warr anty And After-Ser vice W arranty and after-service If a problem occurs with the equipment, rst refer to the “T roubleshooting” and run through the suggested checks. If this does not resolve the problem, please contact your dealer or service company . They will tell you what warranty condition is applied. Specications Specicati ...

  • Hitachi CP-X265 - page 66

    66 Specications Specications (continued) AC IN AUDIO IN3 AUDIO IN2 Y R L C B /P B C R /P R AUDIO IN1 RGB IN1 RGB IN2 LAN CONTROL RGB OUT AUDIO OUT USB VIDEO S-VIDEO 306 mm 249 mm 120 mm 106 mm ...

Manufacturer Hitachi Category Projector

Documents that we receive from a manufacturer of a Hitachi CP-X265 can be divided into several groups. They are, among others:
- Hitachi technical drawings
- CP-X265 manuals
- Hitachi product data sheets
- information booklets
- or energy labels Hitachi CP-X265
All of them are important, but the most important information from the point of view of use of the device are in the user manual Hitachi CP-X265.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Hitachi CP-X265, service manual, brief instructions and user manuals Hitachi CP-X265. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Hitachi CP-X265.

Similar manuals

A complete manual for the device Hitachi CP-X265, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Hitachi CP-X265 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Hitachi CP-X265.

A complete Hitachi manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Hitachi CP-X265 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Hitachi CP-X265, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Hitachi CP-X265, that we can find in the current document
3. Tips how to use the basic functions of the device Hitachi CP-X265 - which should help us in our first steps of using Hitachi CP-X265
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Hitachi CP-X265
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Hitachi CP-X265 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Hitachi CP-X265?

Use the form below

If you did not solve your problem by using a manual Hitachi CP-X265, ask a question using the form below. If a user had a similar problem with Hitachi CP-X265 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)