-
Servis-Rhino 4211 - page 1
© 201 1 Alamo Group Inc. $0.00 421 1 421 1SS Published 01/1 1 Part No. F-3753C OPERA T OR’S MANUAL RHINO ® 1020 S. Sangamon A ve. Gibson City , IL 60936 800-446-5158 Email: parts@servis-rhino.com LOADER This Operator' s Manual is an integral p art of th e safe operation of this machine an d must be maint ained with the un it at all times. ...
-
Servis-Rhino 4211 - page 2
T o the Owner/Operator/Dealer All implement s with moving part s are potentially ha zardous . There is no subs titute for a c autious , safe-minded operator who recognizes the potential hazards and follows reason able safety practices. The manufa cturer has designed this implement to be used with all its sa fety equipment proper ly attach ed to min ...
-
Servis-Rhino 4211 - page 3
T ABLE OF CONTENTS SAFETY SECTION ........ ................................................. .......................................... ........... 1- 1 General Safety Instructions and Practic es ................ ................ ................ .................... ................ . ............... ..... 1-2 Operator Safety I nstructions and Pra ...
-
Servis-Rhino 4211 - page 4
Transporting on Public Roadways ..... .................... ............. ................ ................ ................ ......... .............. ...... 4-40 Hauling the Tractor and Implement . ................ .................... ................ ................ ................... ..... .................. ... 4-42 TROUBLESHOOTING GU IDE .... ...
-
Servis-Rhino 4211 - page 5
Safety Section 1-1 SAFETY SECTION ...
-
Servis-Rhino 4211 - page 6
SAFETY 4211-4211SS 01/11 Safety Section 1-2 © 201 1 Alamo G roup Inc. SAFETY General Safety Instruct ions and Practices A careful operator is the best opera tor . Safety is of primary import ance to the manu facturer and should be to the owner/operator . Most accidents ca n be avoided by being aware of yo ur equipment, your surroun dings, and obse ...
-
Servis-Rhino 4211 - page 7
SAFETY 4211-4211SS 01/11 Safety Section 1-3 © 201 1 Alamo G roup Inc. SAFETY Never allow children to operate, ri de on, or come close to the T ractor or Implement. Usually , 16-17 year- old children who are ma ture and responsible can operate the implement with adult supervision, if they have read and underst and the Operato r ’s Manuals, been t ...
-
Servis-Rhino 4211 - page 8
SAFETY 4211-4211SS 01/11 Safety Section 1-4 © 201 1 Alamo G roup Inc. SAFETY Operator Safety Inst ructions and Practices Never operate the T ractor or Implement until you h ave read and completely under stand th is Manual, the T ractor Operator ’s Manual, an d each of the Safety Messages found in the Manual or on the T ractor and Implement. Lear ...
-
Servis-Rhino 4211 - page 9
SAFETY 4211-4211SS 01/11 Safety Section 1-5 © 201 1 Alamo G roup Inc. SAFETY Equipment Operation Safety Instructions and Practices Prolonged oper ation may cause ope rator bor edom and fa tigue affe cting safe operation. T ake scheduled work breaks to help prev ent these p otentially impaire d operating conditions. Never operate the Implement and ...
-
Servis-Rhino 4211 - page 10
SAFETY 4211-4211SS 01/11 Safety Section 1-6 © 201 1 Alamo G roup Inc. SAFETY Never grasp control levers wh en mounting the machine. (SBH-4) The Boom is designed only to position and operat e the Bucket which is attached to it. Never attempt to lift, pull, or push ot her solid object s with the boom or bucket. Serious injury could result from a str ...
-
Servis-Rhino 4211 - page 11
SAFETY 4211-4211SS 01/11 Safety Section 1-7 © 201 1 Alamo G roup Inc. SAFETY Do Not operate this eq uipment in areas where in sects such as bees may att ack you and/or cause you to lose contro l of the equip ment. If you must enter in such areas, use a tractor with an enclosed Cab and close the windows to pr event insects fr om entering. If a trac ...
-
Servis-Rhino 4211 - page 12
SAFETY 4211-4211SS 01/11 Safety Section 1-8 © 201 1 Alamo G roup Inc. SAFETY Do not let the lo ader or att achment cont act electrical power line s. Conta ct with electrical power lines can result in serious injur y or electrocution. If the loader attach ment contact s a power line remain in the tractor seat until the power has been shu t off. S t ...
-
Servis-Rhino 4211 - page 13
SAFETY 4211-4211SS 01/11 Safety Section 1-9 © 201 1 Alamo G roup Inc. SAFETY Do not use an attachmen t that is not securely atta ched to the quick hitch, The attachment could fall r esu lting in severe crushing injuries or death to the operat or or bystander s. • Rotate both hitc h pin leve rs down to th e locked pos ition. Y ou sho uld feel a f ...
-
Servis-Rhino 4211 - page 14
SAFETY 4211-4211SS 01/11 Safety Section 1-10 © 201 1 Alamo G roup Inc. SAFETY Know before you DIG . Call 88 8-258-0808 and reques t that all buried utilities locations be identified before digging in un familiar ground. Do not let the loader or attachment contact buried electrical power lines, ut ilities or gas lines. Contact wit h electrical powe ...
-
Servis-Rhino 4211 - page 15
SAFETY 4211-4211SS 01/11 Safe ty Section 1-11 © 201 1 Alamo G roup Inc. SAFETY Never leave the Implement a nd Power Unit unattended while the Implement is in the raised position. Accidental opera tion of a lifting lever or a hydrau lic failure may cause the implement to suddenly fa ll causing serious in jury or possible death to anyone who mi ght ...
-
Servis-Rhino 4211 - page 16
SAFETY 4211-4211SS 01/11 Safety Section 1-12 © 201 1 Alamo G roup Inc. SAFETY Connecting or Disconnecting Im plement Safety Instructions and Practices Do not stand or allow byst ander or coworkers between the loader and the tractor while installing or disconnecting the loader from the tractor . Keep hands and body clear of the loader and the loade ...
-
Servis-Rhino 4211 - page 17
SAFETY 4211-4211SS 01/11 Safe ty Section 1-13 © 201 1 Alamo G roup Inc. SAFETY T ransporting Safety Instructions and Practices T ransport only at speeds where you can maint ain control of the equipment. Seriou s accident s and injuries ca n result from operating this equipment at high sp eeds. Unders t and the T ractor and Implement and how it han ...
-
Servis-Rhino 4211 - page 18
SAFETY 4211-4211SS 01/11 Safety Section 1-14 © 201 1 Alamo G roup Inc. SAFETY Maintenance and Service Saf ety Instructions and Practices Lower the loader to th e bed of the truck or tra iler when transporting the tractor and loader with a truck. Measure to ensure the tr ansport height does not exceed the legal limit s. Contact with overhead obstru ...
-
Servis-Rhino 4211 - page 19
SAFETY 4211-4211SS 01/11 Safe ty Section 1-15 © 201 1 Alamo G roup Inc. SAFETY Do not modify or alter this Implement. Do not permit an yone to modify or alter this Implement, any of its compone nts or any Implem ent functio n. (SG-8) Never work under the Imp lement, the framework, or an y lifted compo nent unless the Implement is secure ly support ...
-
Servis-Rhino 4211 - page 20
SAFETY 4211-4211SS 01/11 Safety Section 1-16 © 201 1 Alamo G roup Inc. SAFETY Avoid contact with hot surfaces inclu ding hydraulic oil t anks, pumps, motors, valves and hose connections. Relieve hydr aulic pressure before performing maintenance or repairs. Use gloves and eye protectio n when servicing hot compone nts. Cont act with a hot surface o ...
-
Servis-Rhino 4211 - page 21
SAFETY 4211-4211SS 01/11 Safe ty Section 1-17 © 201 1 Alamo G roup Inc. SAFETY S torage and Parking Safety Instructions and Practices Concluding Safety Instr uctions and Practices Never crawl under or allow childr en to play ar ound or on a loader that is disconnected fro m the tractor . The loader could fall crushing a pe rson resulting in seri o ...
-
Servis-Rhino 4211 - page 22
SAFETY 4211-4211SS 01/11 Safety Section 1-18 © 201 1 Alamo G roup Inc. SAFETY Decal Location NOTE: Rhino supplies safety decals on this product to promote safe op eration. Damage to the de cals may occur while in shipping, use, or reco nditioning. Rhino cares about the safe ty of it s customers, operators, and bystanders, and will replace the safe ...
-
Servis-Rhino 4211 - page 23
SAFETY 4211-4211SS 01/11 Safe ty Section 1-19 © 201 1 Alamo G roup Inc. SAFETY ITEM P ART NO. QTY LEVEL DESCRIPTION 1. 49696 1 LOGO Rhino, Left 2. 51448 1 LOGO Rhino, Right 3. 50207 2 MODEL 421 1 50271 2 MODEL 421 1SS 4. 52740 2 W ARNING Oil Leaks 5. 52203 1 W ARNING Lock V alve in Transport 6. 52204 1 INSTRUCT Loader Positions 7. D469 1 W ARNING ...
-
Servis-Rhino 4211 - page 24
SAFETY 4211-4211SS 01/11 Safety Section 1-20 © 201 1 Alamo G roup Inc. SAFETY Decal Description Rhino, Le ft P/N 49696 Rhino, Right P/N 51448 MODEL NAME: 421 1 P/N 50207 MODEL NAME: 421 1SS P/N 50271 ...
-
Servis-Rhino 4211 - page 25
SAFETY 4211-4211SS 01/11 Safe ty Section 1-21 © 201 1 Alamo G roup Inc. SAFETY W A RNING! - DO NOT operate with oil leaks. -Inspect hoses regularly . Failure to inspect and replace worn hoses may allow th em to rupture suddenly and violently , resulting in serious bodily inju ry or death from scalding, fire burn injury , or oil penetration. -Fraye ...
-
Servis-Rhino 4211 - page 26
SAFETY 4211-4211SS 01/11 Safety Section 1-22 © 201 1 Alamo G roup Inc. SAFETY Loader Safety -Read, understand and follow the operation, warning , and safety instruction s in the Operator ’s Manual. -Equip tractor with ROPS (Ro ll Over Protection System) before installing or operati ng the loader . -Operate Loader only from operator ’s seat wit ...
-
Servis-Rhino 4211 - page 27
SAFETY 4211-4211SS 01/11 Safe ty Section 1-23 © 201 1 Alamo G roup Inc. SAFETY DANGER! - Use ROPS and seatbelt at all times. Add recommende d rear ballast. Operate tr actor at low speeds. Failure to comp ly may result in serious injury or death. D470 Read Operato r ’s Manual! The operator’s manual is located inside this canister . If the manua ...
-
Servis-Rhino 4211 - page 28
SAFETY 4211-4211SS 01/11 Safety Section 1-24 © 201 1 Alamo G roup Inc. SAFETY Federal Laws and Re gulations This section is intended to explain in broad terms the conc ept and effect of federal laws and regulations concern ing employer and employee eq uipment operators. Thi s section is not intend ed as a legal interpretation of the law and should ...
-
Servis-Rhino 4211 - page 29
Introduction Section 2-1 INTRODUCTION SECTION ...
-
Servis-Rhino 4211 - page 30
INTRODUCTION 4211-4211SS 01/11 Introduction Section 2-2 © 201 1 Alam o Group Inc. INTRODUCTION This 421 1 & 42 1 1SS Loade rs are designed wit h care and built with quality materials by skilled workers. Proper assembly , maintenance, and operating practices, as described in this manual, will help the owner /operator get years of satisfactory s ...
-
Servis-Rhino 4211 - page 31
INTRODUCTION 4211-4211SS 01/11 Introduction Section 2-3 © 201 1 Alamo Group Inc. INTRODUCTION DO NOT use drugs or alc ohol immediately befo re or while operating the T ractor and Implement. Drugs and alcohol w ill affect an operator ’s alertness and coordination and theref ore af fect the operator ’s ability to operate the eq uipment safely . ...
-
Servis-Rhino 4211 - page 32
INTRODUCTION 4211-4211SS 01/11 Introduction Section 2-4 © 201 1 Alam o Group Inc. INTRODUCTION The RHINO 421 1 & 421 1SS Loaders are designed fo r four-wheel drive trac tors. They are intended to li ft only loose materials that will fit in the bucket. All cylinders are double-acting. Parking stands support loader so tractor can be “driven in ...
-
Servis-Rhino 4211 - page 33
INTRODUCTION 4211-4211SS 01/11 Introduction Section 2-5 © 201 1 Alamo Group Inc. INTRODUCTION Attention Owner/Operator BEFORE OPERA TING THIS MACHINE: 1. Carefully read the Operator’s Manual, completely understa nd the Safety Messages and instructions, and know how to operate correctly both the tractor and implement. 2. Fill out the Warranty Car ...
-
Servis-Rhino 4211 - page 34
...
-
Servis-Rhino 4211 - page 35
Assembly Section 3-1 ASSEMBL Y AND CONNECTING THE LOADER SECTION ...
-
Servis-Rhino 4211 - page 36
ASSEMBLY 4211-4211SS 01/11 Assembly Section 3-2 © 201 1 Alam o Group Inc. ASSEMBL Y Assembly Instructions T o avoid injury during installation of the load er attachment, do not allo w bystanders with in 10 feet of load er or attachment . Always wear safety glasses when removing or installing buckets. Always use a drif t and hammer made of non-sp a ...
-
Servis-Rhino 4211 - page 37
ASSEMBLY 4211-4211SS 01/11 Assembly Section 3-3 © 201 1 Alam o Group Inc. ASSEMBL Y Do not use an attachmen t that is not securely atta ched to the quick hitch, The attachment could fall r esu lting in severe crushing injuries or death to the operat or or bystander s. • Rotate both hitc h pin leve rs down to th e locked pos ition. Y ou sho uld f ...
-
Servis-Rhino 4211 - page 38
ASSEMBLY 4211-4211SS 01/11 Assembly Section 3-4 © 201 1 Alam o Group Inc. ASSEMBL Y Proper Rear Ballastin g and Wheel Sp acing S pread fro nt wheels to maximum distance. S pread rear wheels to maximum dis tance. Add rear wheel weight, rea r ballast box or implement. Make sure the r e is 25% of total weight on rear ax le. ...
-
Servis-Rhino 4211 - page 39
ASSEMBLY 4211-4211SS 01/11 Assembly Section 3-5 © 201 1 Alam o Group Inc. ASSEMBL Y Dismounting Loader and Mo unting Loader to T ractor T o avoid injury during installation of loader: • Place loader bucket against barrie r to restrict forward movemen t of loader . • Do not permit byst anders within 15 feet of loader . Loader must be equippe d ...
-
Servis-Rhino 4211 - page 40
ASSEMBLY 4211-4211SS 01/11 Assembly Section 3-6 © 201 1 Alam o Group Inc. ASSEMBL Y Mounting Loader Mounting is basically reve rse of dismo unting. 1. Slowly drive tractor up to loader . Shut off tractor an d apply brakes. 2. Connect hydraulic hose s. 3. S tart engine and release brakes. Op erate loader control lever to ext end bucket cylinder , w ...
-
Servis-Rhino 4211 - page 41
ASSEMBLY 4211-4211SS 01/11 Assembly Section 3-7 © 201 1 Alam o Group Inc. ASSEMBL Y Mounting and Dismounting Att achment Mounting Att achment to Loader T o avoid injury during installatio n of bucket or attachment, do not allow bystan ders within 10 feet of loader , bucket or attachment. 1. Locate tractor and att achment on level ground. Lo wer bo ...
-
Servis-Rhino 4211 - page 42
ASSEMBLY 4211-4211SS 01/11 Assembly Section 3-8 © 201 1 Alam o Group Inc. ASSEMBL Y Assembling Quick Att ach Device Quick att ach device can be inst alle d using tools ordina rily available. T orque all hardware to specifications listed in loader operator ’s manual. Shut off th e tractor engine and engage the tra ctor brakes during inst allation ...
-
Servis-Rhino 4211 - page 43
ASSEMBLY 4211-4211SS 01/11 Assembly Section 3-9 © 201 1 Alam o Group Inc. ASSEMBL Y Inst alling Quick Attach Device Always use a drift and hammer made of non-sparking mate rial (a shot-filled mallet is recommended) to inst all or remove pins. A steel hammer or drif t could generate flying meta l fragments and result in injury . Always wear safety ...
-
Servis-Rhino 4211 - page 44
ASSEMBLY 4211-4211SS 01/11 Assembly Section 3-10 © 201 1 Alam o Group Inc. ASSEMBL Y When Connecting an Att achment to the Loader Quick Hitch 1. Be sure both quick hitch pin levers are in the unlocked position, with th e levers pointing up. T ilt the loader quick hitch forwar d, drive the loader in to the attach ment bracket and engage top of the ...
-
Servis-Rhino 4211 - page 45
ASSEMBLY 4211-4211SS 01/11 Assembly Section 3-11 © 201 1 Alam o Group Inc. ASSEMBL Y 5. On level g round, tilt the attachment down 90 degrees and lower it to the ground. Lower the lo ader further to slightly raise the front of th e tractor of the tractor off the ground. Drive the tractor in reverse whi le the attachment is on the groun d for 20-3 ...
-
Servis-Rhino 4211 - page 46
...
-
Servis-Rhino 4211 - page 47
Operation Section 4-1 OPERA TION SECTION ...
-
Servis-Rhino 4211 - page 48
OPERATION 4211-4211SS 01/11 Operation Section 4-2 © 201 1 Alam o Group Inc. OPERA TION RHINO 421 1 & 421 1SS LOADER OPERA TION INSTRUCTIONS Y our 421 1 & 421 1SS Loader sh ould now be assembled and inspected for any ev idence of defective or damaged parts before use. Any evide nce of damage shou ld be reported to your dealer immed iately . ...
-
Servis-Rhino 4211 - page 49
OPERATION 4211-4211SS 01/11 Operation Section 4-3 © 201 1 Alam o Group Inc. OPERA TION 1. S t andard Equipment and Specifications S pecifications will vary w ith tractor , tire size, hydrau lic system and bucket used. T he specifications are given for a loader equipped with 72” material bucket operated with an aver age tractor hydraulic system o ...
-
Servis-Rhino 4211 - page 50
OPERATION 4211-4211SS 01/11 Operation Section 4-4 © 201 1 Alam o Group Inc. OPERA TION 2. Operator Requirement s DO NOT use drugs or alc ohol immediately befo re or while operating the T ractor and Implement. Drugs and alcohol w ill affect an operator ’s alertness and coordination and theref ore af fect the operator ’s ability to operate the e ...
-
Servis-Rhino 4211 - page 51
OPERATION 4211-4211SS 01/11 Operation Section 4-5 © 201 1 Alam o Group Inc. OPERA TION Always read carefully and comply fully with the manufacturer ’ s instructions when handling oil, solvents, cleanser s, and any other chemical agent. (SG-22) Never run the T ractor engine in a closed building or without adequate ventilation. The exhaust fumes c ...
-
Servis-Rhino 4211 - page 52
OPERATION 4211-4211SS 01/11 Operation Section 4-6 © 201 1 Alam o Group Inc. OPERA TION Repeated or subst antial breathing of hazardous dusts, in cluding crystalline silica, could ca use fatal or serious respiratory disease including silicosis. Concrete, maso nry , many types of rock, and various other materials contain silica sand. Californi a lis ...
-
Servis-Rhino 4211 - page 53
OPERATION 4211-4211SS 01/11 Operation Section 4-7 © 201 1 Alam o Group Inc. OPERA TION 3. T ractor Requirement s T ractor Requirement s and Cap abilities • ASABE approved Roll-Over Protective S tru cture (ROP S) or RO PS cab and seat belt. • T ractor Safety Devices ....... .......... Slow Moving V ehic le (SMV) emblem, lighting • Tractor Bal ...
-
Servis-Rhino 4211 - page 54
OPERATION 4211-4211SS 01/11 Operation Section 4-8 © 201 1 Alam o Group Inc. OPERA TION 3.3 T ractor Ballast Before operating tractor an d loader , add sufficient co unterweight so a minimu m of 25% of the total weight is on the rear axle . T otal weight include s weight of: tractor , loader , rated load i n bucket, and counterweigh t. Rated load i ...
-
Servis-Rhino 4211 - page 55
OPERATION 4211-4211SS 01/11 Operation Section 4-9 © 201 1 Alam o Group Inc. OPERA TION 4.1 Boarding the T ractor 4.2 Dismounting the T ractor Never allow children or other persons to ride on the T ractor or Implement. Falling off can result in serious injury or death. (SG-1 0) Never grasp control levers wh en mounting the machine. (SBH-4) Use both ...
-
Servis-Rhino 4211 - page 56
OPERATION 4211-4211SS 01/11 Ope ration Section 4-10 © 201 1 Alam o Group Inc. OPERA TION 5. St arting the T ractor Never run the T ractor engine in a closed building or without adequate ventilation. The exhaust fumes can be hazardous to your hea lth. (SG-23) S tart tractor only when pr operly seated in the T ractor seat. S tarting a tractor in gea ...
-
Servis-Rhino 4211 - page 57
OPERATION 4211-4211SS 01/11 Ope ration Section 4-11 © 201 1 Alam o Group Inc. OPERA TION 6. Pre-Operation Inspection and Service Periodically inspect all moving part s for wear and replace whe n necessary with au thorized service part s. Look for loose fasteners, worn or broken p arts, and leaky or loose fittings. Make sure all pins have cotter pi ...
-
Servis-Rhino 4211 - page 58
OPERATION 4211-4211SS 01/11 Ope ration Section 4-12 © 201 1 Alam o Group Inc. OPERA TION 6.2 Loader Pre-Operation Inspection and Service 6.1 T ractor Pre-Operation Inspection/Service Refer to the tr actor operator’s manual to ensure a complete pre-operation inspection and scheduled service is performed accordi ng to the manufacturers recommenda ...
-
Servis-Rhino 4211 - page 59
OPERATION 4211-4211SS 01/11 Ope ration Section 4-13 © 201 1 Alam o Group Inc. OPERA TION Before operation, a complete inspection and ser vice is required to ensur e the loader is in a good a nd safe working condition. Damaged and/or broken part s should be repa ired and/or replaced imme diately . T o ensure the loader is ready for operation, co nd ...
-
Servis-Rhino 4211 - page 60
OPERATION 4211-4211SS 01/11 Ope ration Section 4-14 © 201 1 Alam o Group Inc. OPERA TION LOADER BOOM ASSEMBL Y • Inspect condition of each arm section weldment • Ensure all pins ar e in place. • Ensure all bol ts and screws are proper ly installed. • Check condition o f bushings at boom pivot points. • Ensure each hydraulic cy linder is ...
-
Servis-Rhino 4211 - page 61
OPERATION 4211-4211SS 01/11 Ope ration Section 4-15 © 201 1 Alam o Group Inc. OPERA TION T ractor PRE-OPERA TION Inspection T ractor ID#______________________ Make____________________ Date___________________________ Shift_____________________ Before conducting the inspection, make sur e the tractor engine is off, all rotation has stopped and the t ...
-
Servis-Rhino 4211 - page 62
OPERATION 4211-4211SS 01/11 Ope ration Section 4-16 © 201 1 Alam o Group Inc. OPERA TION FRONT END LOADER PRE- OPERA TION Inspection Front End Loader ID#_______________Make____________________ Date_____________________________Shift____________________ Before conducting the inspection, make sure the tractor en gine is off, all rotation has stopped ...
-
Servis-Rhino 4211 - page 63
OPERATION 4211-4211SS 01/11 Ope ration Section 4-17 © 201 1 Alam o Group Inc. OPERA TION 7. Driving the T ractor and Loader This Implemen t may be wider than the T ractor . Be care ful when opera ting or transpor ting this equipment to pr event the Impleme nt from runni ng into or striking sign pos ts, guard rails, concrete abutments o r other sol ...
-
Servis-Rhino 4211 - page 64
OPERATION 4211-4211SS 01/11 Ope ration Section 4-18 © 201 1 Alam o Group Inc. OPERA TION Safe tractor transport requ ires the operator possess a thorough knowledge o f the model being op erated and precautions to t ake while driving with an attached imp lem ent. Ensure the tractor has the cap acity to handle the weight of the implement and the tra ...
-
Servis-Rhino 4211 - page 65
OPERATION 4211-4211SS 01/11 Ope ration Section 4-19 © 201 1 Alam o Group Inc. OPERA TION Do not raise the loader on a hillside. Do not transport across a slope with a raised loader . When the loader is raised, the center of gravity of the tractor and loader is ra ised increasing the pote ntial for the tractor to tip over . Tractor whe el contact w ...
-
Servis-Rhino 4211 - page 66
OPERATION 4211-4211SS 01/11 Ope ration Section 4-20 © 201 1 Alam o Group Inc. OPERA TION Use extra care when turning or stopping. Allow for incr eased length and weight of ad ded loader . The loader adds five to six fee t of lengt h in front of the tractor and significant weight. Allow extra dist ance when stopping or turning. Do not allow loader ...
-
Servis-Rhino 4211 - page 67
OPERATION 4211-4211SS 01/11 Ope ration Section 4-21 © 201 1 Alam o Group Inc. OPERA TION Do not use an attachmen t that is not securely atta ched to the quick hitch, The attachment could fall r esu lting in severe crushing injuries or death to the operat or or bystander s. • Rotate both hitc h pin leve rs down to th e locked pos ition. Y ou sho ...
-
Servis-Rhino 4211 - page 68
OPERATION 4211-4211SS 01/11 Ope ration Section 4-22 © 201 1 Alam o Group Inc. OPERA TION Do not use loader a s a jack to raise the tractor tires of f the ground. The loader co uld fail causing the tractor and loader to fall to the ground resulting in serious injury . (S L-25) Use extreme care when loading, transp orting or dumping loads that imp a ...
-
Servis-Rhino 4211 - page 69
OPERATION 4211-4211SS 01/11 Ope ration Section 4-23 © 201 1 Alam o Group Inc. OPERA TION Always have a heavy att achment, such as a bu cket mounted on loader when it is removed from tractor . It is importan t not to put excessive weig ht on parking stands with lift cylinder retr action. Damage may result. If the loader valve controls fail to funct ...
-
Servis-Rhino 4211 - page 70
OPERATION 4211-4211SS 01/11 Ope ration Section 4-24 © 201 1 Alam o Group Inc. OPERA TION 8.1 Operating the Loader The following text and illustrati ons offer suggested loader an d tractor operating techniques. FILLING THE BUCKET Approach and enter th e pile with a level bucket. Loaders with 1-lever co ntrol, ease lever back toward you to lift and ...
-
Servis-Rhino 4211 - page 71
OPERATION 4211-4211SS 01/11 Ope ration Section 4-25 © 201 1 Alam o Group Inc. OPERA TION Lift and roll back of bucket will increase efficiency because... ...
-
Servis-Rhino 4211 - page 72
OPERATION 4211-4211SS 01/11 Ope ration Section 4-26 © 201 1 Alam o Group Inc. OPERA TION A level bucket throughout the lif ting cycle resists bucket lift and increa ses breakaway ef f ort. NOTE: Do not be concerned if the bucket is not completely filled durin g each pass. Maximum productivity is dete rmined by the amou nt of material loaded in a g ...
-
Servis-Rhino 4211 - page 73
OPERATION 4211-4211SS 01/11 Ope ration Section 4-27 © 201 1 Alam o Group Inc. OPERA TION CARR YING THE LOAD Position bucket just below tractor hood for maximum stability and visib ility , whether bucket is loaded or empty . Use extreme care when ope rating loader on a slope, keep bucket as low as possible. This keep s center of gravity low and wil ...
-
Servis-Rhino 4211 - page 74
OPERATION 4211-4211SS 01/11 Ope ration Section 4-28 © 201 1 Alam o Group Inc. OPERA TION DUMPING THE BUCKET Lift bucket high enough to clear sid e of vehicle. Move tractor in as close as possible to side of vehicle, then dump bucket. LOWERING THE BUCKET After bucke t is dumped, back away fro m vehicle while lowering and rolling back bucket. ...
-
Servis-Rhino 4211 - page 75
OPERATION 4211-4211SS 01/11 Ope ration Section 4-29 © 201 1 Alam o Group Inc. OPERA TION OPERA TING WITH FLOA T CONTROL During hard surf ace operation, keep bucket level and put lift contro l in float position to permit bucket to float on workin g surface. If hy draulic down pressure is exerted on bucket, it will wear faster than normal. Float wil ...
-
Servis-Rhino 4211 - page 76
OPERATION 4211-4211SS 01/11 Ope ration Section 4-30 © 201 1 Alam o Group Inc. OPERA TION LOADING FROM A BANK Choose a forward gear that pr ovides sufficient ground speed for loading. Exercise caution when un dercutting high ba nks. Dirt slides can be dangerous. Load fro m as low as possible for maximum efficiency . L oader lift and breakaway capac ...
-
Servis-Rhino 4211 - page 77
OPERATION 4211-4211SS 01/11 Ope ration Section 4-31 © 201 1 Alam o Group Inc. OPERA TION Another method for large dirt piles is to build a ramp approach to the pile. It is important to keep the bucket level when approaching a bank or pile. This will help prevent gouging the work ar ea. ...
-
Servis-Rhino 4211 - page 78
OPERATION 4211-4211SS 01/11 Ope ration Section 4-32 © 201 1 Alam o Group Inc. OPERA TION PEELING AND SCRAPING Use a slight bucket angle, travel forward and hold lift control forward to st art the cut. Make a short 5 to 8 foot angle cut and break out cleanly . With bucket level, st art a cut at notch approximately 2 inches deep. Hold dep th by feat ...
-
Servis-Rhino 4211 - page 79
OPERATION 4211-4211SS 01/11 Ope ration Section 4-33 © 201 1 Alam o Group Inc. OPERA TION LOADING LOW TRUCKS OR SPREADE RS FROM A PILE For faster load ing, minimize angle of turn and length of run between pile and spreader . Back grade occasionally with a loaded bucket to keep working surface free of rut s and holes. Also, hold lift control forward ...
-
Servis-Rhino 4211 - page 80
OPERATION 4211-4211SS 01/11 Ope ration Section 4-34 © 201 1 Alam o Group Inc. OPERA TION BACKFILLING Approach pile wit h a level bucket. Poor methods actually move no more dirt and make it more diff icult to hold a level grade. Do not use bucket in dumped position for bulldozing. This method , shown above, will impose severe shock loadings on dump ...
-
Servis-Rhino 4211 - page 81
OPERATION 4211-4211SS 01/11 Ope ration Section 4-35 © 201 1 Alam o Group Inc. OPERA TION Leave dirt in bucket. Dumping o n each pass wastes time. Operate tractor at righ t angles to ditch. T ake as big a bite as tractor can ha ndle without lugging down. ...
-
Servis-Rhino 4211 - page 82
OPERATION 4211-4211SS 01/11 Ope ration Section 4-36 © 201 1 Alam o Group Inc. OPERA TION Leave dirt which drif ts over side of bucket for final cleanup. Pile dirt on high side for easier backfilling on a slope. HANDLING LARGE HEA VY OBJE CTS 1. Using front end loaders for hand ling large heavy object s such as large round or rectangular ba les, lo ...
-
Servis-Rhino 4211 - page 83
OPERATION 4211-4211SS 01/11 Ope ration Section 4-37 © 201 1 Alam o Group Inc. OPERA TION 8.2 Operating Bale Spear Operate the bale spear using extreme caution. Sharp point s on bale spear can cause serious injur y or death. Because of size and we ight of large bales, e xtreme care must be t aken in handling them. Be aware of forces actin g on stac ...
-
Servis-Rhino 4211 - page 84
OPERATION 4211-4211SS 01/11 Ope ration Section 4-38 © 201 1 Alam o Group Inc. OPERA TION Carry bales as low to th e ground as possible to allow maximum visibility and avoid tipping. 9. Loader Storage Properly prep aring and storing the loader at the end of t he season is critical to ma in taining it s appearance and to help ensure years of dependa ...
-
Servis-Rhino 4211 - page 85
OPERATION 4211-4211SS 01/11 Ope ration Section 4-39 © 201 1 Alam o Group Inc. OPERA TION T ransport only at speeds where you can maint ain control of the equipment. Seriou s accident s and injuries ca n result from operating this equipment at high sp eeds. Unders t and the T ractor and Implement and how it handles before transporting on str eets a ...
-
Servis-Rhino 4211 - page 86
OPERATION 4211-4211SS 01/11 Ope ration Section 4-40 © 201 1 Alam o Group Inc. OPERA TION 10.1 T ransporting on Public Roadways Inherent hazards of operating the tr actor and implement and the possibilit y of accidents are not left behind when you finish work ing in an area. Therefore, the op erator must employ g ood judgement an d safe operation p ...
-
Servis-Rhino 4211 - page 87
OPERATION 4211-4211SS 01/11 Ope ration Section 4-41 © 201 1 Alam o Group Inc. OPERA TION Extreme caution should be used wh en transporting the tractor and imp lement on public roadways. The tractor must be eq uipped with all required s afety warning features in cluding a SM V emblem and flashing war ning lights to al ert drivers of the tractor’s ...
-
Servis-Rhino 4211 - page 88
OPERATION 4211-4211SS 01/11 Ope ration Section 4-42 © 201 1 Alam o Group Inc. OPERA TION 10.2 Hauling the T r actor and Implement Before transporting a loade d tractor and imple ment, measure the height and width dimensions and gross weight of the complete loaded unit. Ensure that the load will be in compliance wit h the legal limits set for the a ...
-
Servis-Rhino 4211 - page 89
OPERATION 4211-4211SS 01/11 Ope ration Section 4-43 © 201 1 Alam o Group Inc. OPERA TION 1 1. TROUBLESHOOTING GUIDE TROUBLE POSSIBLE CAUSE POSSIBLE REMEDY Loader slow or will not lif t Hydraulic oil too heav y . Change to proper oil. and/or dump Oil filter plugged. Clean or replace filter . Hydraulic pump worn. Repai r or replace pump. Oil line re ...
-
Servis-Rhino 4211 - page 90
...
-
Servis-Rhino 4211 - page 91
Maintenanc e Section 5-1 MAINTENANCE SECTION ...
-
Servis-Rhino 4211 - page 92
MAINTENANCE 4211-4211SS 01/11 Maintenance Section 5 -2 © 201 1 Alam o Group Inc. MAINTENANCE READ, UNDERST AND, and FOLLOW the following Safety Messag es. Serious injury or death may occur unless care is t aken to follow the warnings and instructions st ated in the Safety Messages. Always use good common sense to avoid hazards. (SG-2) Never interf ...
-
Servis-Rhino 4211 - page 93
MAINTENANCE 4211-4211SS 01/11 Maintenance Section 5 -3 © 201 1 Alam o Group Inc. MAINTENANCE NEVER perform maintenance benea th a raised loader unless lo ader is properly supported to prevent accident al lowering. Do Not fill fuel tank while engine is running. Refuel only after engi ne has cooled down. If fuel is spilled, move machine away from th ...
-
Servis-Rhino 4211 - page 94
MAINTENANCE 4211-4211SS 01/11 Maintenance Section 5 -4 © 201 1 Alam o Group Inc. MAINTENANCE Lubrication Schedule Before operating your Loader , take the time to inspect a nd re pair any damag e to the machine or tractor . Only a minimum of time and ef fort is required to regularly main tain this machine to pr ovide long life and trouble fre e ope ...
-
Servis-Rhino 4211 - page 95
MAINTENANCE 4211-4211SS 01/11 Maintenance Section 5 -5 © 201 1 Alam o Group Inc. MAINTENANCE Daily Maintenance Regular maintenance of your loader and hydraulic system will insure maximum load er efficiency and long life. 1. Check fluid level of tracto r hydraulic system be fore starting each day’s operation . If necessary , add hydraulic oil as ...
-
Servis-Rhino 4211 - page 96
MAINTENANCE 4211-4211SS 01/11 Maintenance Section 5 -6 © 201 1 Alam o Group Inc. MAINTENANCE Cylinder Service Loader cylinders are designed to be re liable and easy to service. If a cylinder should malfunctio n during warranty pe riod, return co mplete cylinde r assembly , without disassembling, to your authorized service depar tment or cont act y ...
-
Servis-Rhino 4211 - page 97
MAINTENANCE 4211-4211SS 01/11 Maintenance Section 5 -7 © 201 1 Alam o Group Inc. MAINTENANCE Lif t and Bucket Cylind er Reassembly Note: Be careful not to damage seals and o-rings on e dges or holes in cylinde r tube. Inspect and remove b urrs and sharp edges if necessary befo re reassembly . 1. Place rod seal ( 3) into gro ove inside cy linder he ...
-
Servis-Rhino 4211 - page 98
MAINTENANCE 4211-4211SS 01/11 Maintenance Section 5 -8 © 201 1 Alam o Group Inc. MAINTENANCE 1. S tore loader with attachment securely attached. 2. Place dust caps on hydraulic quick couple rs. 3. Do no t remove a ttachment from stored lo ader . 4. Do not allo w children to p lay on or arou nd loader . ...
-
Servis-Rhino 4211 - page 99
MAINTENANCE 4211-4211SS 01/11 Maintenance Section 5 -9 © 201 1 Alam o Group Inc. MAINTENANCE Proper T orque for Fasteners The chart lists the corre ct tightening torque for fa stener s. When bolt s are to be tightened or replace d, refer to this chart to determine the grade o f bolts and the prop e r torque except when specific torque values ar e ...
-
Servis-Rhino 4211 - page 100
MAINTENANCE 4211-4211SS 01/11 Maintenance Section 5-10 © 201 1 Alam o Group Inc. MAINTENANCE ...
-
Servis-Rhino 4211 - page 101
MAINTENANCE 4211-4211SS 01/11 Maintenance Section 5-11 © 201 1 Alam o Group Inc. MAINTENANCE ...
-
Servis-Rhino 4211 - page 102
RHINO LIMITED W ARRANTY 1. LIMITED W ARRANTIES 1.01. Rhino warrants for one year from the purchase date to the original non-commercial, governmental, or municipal purchaser (“Purchaser”) and warrants for six months to the original co mmercial or industrial purchaser (“Purchaser”) that the goods purchased are free from defects in material or ...
-
Servis-Rhino 4211 - page 103
T O THE OWNER/OPERA T OR/DEALER T o keep your implement running ef ficiently and safely , read your manual thor oughly and follow these dire ctions and the Safety Messages in this Manual. T he T able of Contents clearly ident ifies each sect ion where you ca n easily find the informa tion you need. The OCCUP A TIONAL SAFETY AND HEAL TH ACT (1928.5 ...
-
Servis-Rhino 4211 - page 104
421 1/421 1SS -SOM-01/1 1 P/N F-3753C Printed U.S.A 421 1/421 1SS LOADER ...
Do you have a question concerning Servis-Rhino 4211?
Use the form below
If you did not solve your problem by using a manual Servis-Rhino 4211, ask a question using the form below. If a user had a similar problem with Servis-Rhino 4211 it is likely that he will want to share the way to solve it.