Manual Integra DHC-80.2

10 pages 0.2 mb
Download

Go to site of 10

Summary
  • Integra DHC-80.2 - page 1

    1 Firmware Update for the DTR-80.2/70.2 and DHC-80.2 W e are pleased to offer this firmware update for th e best possible p erformance of your A V Receiver . A firmware update is now available through the Network or USB connections on the DTR-80.2/70.2 and DHC-80.2. The 1 1/10/10 update addresses the following: DTR-80.2/70.2 and DHC-80.2 1. Improve ...

  • Integra DHC-80.2 - page 2

    2 Firmware Update for DTR-70.2/DTR-80.2 and DHC-80.2 There are the following methods to update the firmware: via network an d via USB storage. Please choose either one that suits your condition. Befo re you start, carefully read the update procedure. It will take about 3 0 minutes to update the firmware.  Update via network You need a wired Inte ...

  • Integra DHC-80.2 - page 3

    3 Updating the Firmware via Network DTR-70.2, DTR-80 .2 and DHC-80.2 a llow you to update firmware using ne twork connection o n rear panel. * In this procedure, on-screen display may vary depending on the model. • Make sure the AV receiver/controller and TV are turned on and Ethernet cable is connected to rear panel of the AV receiver/controller ...

  • Integra DHC-80.2 - page 4

    4  Update procedure 1 Press RECEIVER followed by SETUP on the remote controller. Main menu wi ll be displ ayed on T V screen. Procedures thereafter can also be p erformed on the AV receiver/controller by using its SETUP , arrow, and ENTER buttons. 2 Go to “ Hardware Setup” menu. 3 Go to “ Firmware Update ” menu. Note that the Firmware Up ...

  • Integra DHC-80.2 - page 5

    5  Troubleshooting Case1: If “ No Update ” is displaye d on the front displ ay of the A V receiver/controller, the firmware has already been updated. You do not need to do anything fu rther. Case2: If an erro r occurs, “ Err or!! *-** No media ” is dis played o n the front display of the AV receiver/con troller. (Alpha-nume ric character ...

  • Integra DHC-80.2 - page 6

    6 Updating the Firmware via USB DTR-70.2, DTR-80 .2 and DHC-80.2 allow you to update firmware using a USB storage device. * In this procedure, on-screen display may vary depending on the model. • Make sure the AV receiver/controller and TV are turned on. • Never unplug or turn off the AV receiver/controller during updating process. • Never pl ...

  • Integra DHC-80.2 - page 7

    7  Update procedure 1 Connect a USB storage devi ce to your PC. If there is any data in the USB storage device, remove it. 2 Download the firmware file from the Integra web si te. The file name is as follows: ONKAVR0003_*******.zip Unzip the downloaded file. The following three files are created: ONKAVR0003_*******.of1 ONKAVR0003_*******.of2 ONK ...

  • Integra DHC-80.2 - page 8

    8 12 Message “Com plete!” appears on the front display of the AV receiver/controller, indicating that the update has been completed. 13 Using ON/STANDBY on th e front panel, turn off the AV receiver/controller and then remove the USB storage device. * Do not use ON or STANDBY on the remote controller. 14 Press ON/STANDBY to turn on th e AV rece ...

  • Integra DHC-80.2 - page 9

    9  Troubleshooting Case1: If “ No Update ” is displayed on the front display of the AV receiver/controller, the firmware has already been updated. You do not need to do anything further. Case2: If an error occurs, “ Error!! *-** No media ” is displayed on the front display of the AV receiver/controller. (Alpha-numeric characters on the f ...

  • Integra DHC-80.2 - page 10

    10 ...

Manufacturer Integra Category Stereo Receiver

Documents that we receive from a manufacturer of a Integra DHC-80.2 can be divided into several groups. They are, among others:
- Integra technical drawings
- DHC-80.2 manuals
- Integra product data sheets
- information booklets
- or energy labels Integra DHC-80.2
All of them are important, but the most important information from the point of view of use of the device are in the user manual Integra DHC-80.2.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Integra DHC-80.2, service manual, brief instructions and user manuals Integra DHC-80.2. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Integra DHC-80.2.

Similar manuals

A complete manual for the device Integra DHC-80.2, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Integra DHC-80.2 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Integra DHC-80.2.

A complete Integra manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Integra DHC-80.2 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Integra DHC-80.2, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Integra DHC-80.2, that we can find in the current document
3. Tips how to use the basic functions of the device Integra DHC-80.2 - which should help us in our first steps of using Integra DHC-80.2
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Integra DHC-80.2
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Integra DHC-80.2 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Integra DHC-80.2?

Use the form below

If you did not solve your problem by using a manual Integra DHC-80.2, ask a question using the form below. If a user had a similar problem with Integra DHC-80.2 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)