English dropdown-ico

Manual ARRI 416

20 pages 2.38 mb
Download

Go to site of 20

Summary
  • ARRI 416 - page 1

    About, Software, T ools, Safety 3 Camera Left & Front 4 Camera Right & Back 5 Quick Specs 6 Power On, Camera RUN, Inching, Camera Display 7 Loading the Magazine 8 Mounting the Magazine 10 Changing fps & Shutter Angle 11 Beeper , Backlight & RGB ARRIGLOW 12 On-board Batter y OBB-2 13 Integrated Video System 14 Accessories 16 Timecode ...

  • ARRI 416 - page 2

    ARRIFLEX 416 Quick Guide 05/2006, Page 2 This page is left blank intentionally . ...

  • ARRI 416 - page 3

    ARRIFLEX 416 Quick Guide 05/2006, Page 3 About, Software, T ools, Safety About the 416 Preliminary Quick Guide This Quick Guide (order number K5.40076.0) provides a short introduction to the ARRIFLEX 416. This guide does not replace the ARRIFLEX 416 User’ s Guide (K5.40077.0). It is essential that you acquaint yourself with the user’ s guide be ...

  • ARRI 416 - page 4

    ARRIFLEX 416 Quick Guide 05/2006, Page 4 Camera Left & Fr ont RUN PHASE NORM PS/CCU LOCK MODE SEL/ ∆ SET/ V DIMMER — + Image rotation knob T ape hook PL lens port (Super 16 only) Front 3/8 – 16 mounting point Heated Eyepiece outlet RGB ARRIGLOW brightness buttons PHASE button RUN button Image rotation knob Eyepiece focus ring 416 Standard ...

  • ARRI 416 - page 5

    ARRIFLEX 416 Quick Guide 05/2006, Page 5 Camera Right & Back ON/OFF RUN LCS LCS TCC LDD RF CHAN ZOOM FOCUS IRIS L R L R L R RDY RS RS RUN button MINI MONITOR connector REMOTE connector Power connector (BA T) Magazine fi lm reser ve counter Eyepiece rotation friction BNC connectors RS connectors RUN indicator Pitch adjust Attachment rosette CLM ...

  • ARRI 416 - page 6

    ARRIFLEX 416 Quick Guide 05/2006, Page 6 Quick Specs Fps range: 1 to 75 fps, for ward only , in 0.001 fps increments Mirror Shutter: 180º to 45º, manually adjustable Fixed settings at: 180º, 172.8º, 150º, 144º, 135º, 90º, 45º Use the following angles for fi lming with non-electronic ballast HMI or fl uorescent lighting: 180º: 25 fps, 50 ...

  • ARRI 416 - page 7

    ARRIFLEX 416 Quick Guide 05/2006, Page 7 1 . T otal film exposed (or take counter) Standard speed. 2. Programmed speed. 3 . T ake counter (or total film exposed) Supply voltage & (with OBB-2), batter y capacity/magazines left. 4. Timecode hours & minutes Timecode minutes & framerate 5. Timecode User Bits Timecode User Bits 6. Loudspeake ...

  • ARRI 416 - page 8

    ARRIFLEX 416 Quick Guide 05/2006, Page 8 Loading the 416 Magazine Note: The 416 magazine has its feed and take-up chambers on opposite sides to the SR 1, 2 & 3 magazines. Step 1: The Feed Side Load the unexposed film into the feed side in absolute darkness (darkroom or changing tent). • Open the feed side magazine door and latch back the lay- ...

  • ARRI 416 - page 9

    ARRIFLEX 416 Quick Guide 05/2006, Page 9 Loading the 416 Magazine • Set the loop length by pulling the film head away from you and align it with the loop mark on the bottom of the magazine (see picture above). Adjust the loop length by turning the take-up film core. • Now take your hand off the film core – there is enough inertia in the sproc ...

  • ARRI 416 - page 10

    ARRIFLEX 416 Quick Guide 05/2006, Page 10 Mounting the Magazine • Insert the magazine throat into the magazine aper ture in the back of the camera body and slide the magazine for ward until it locks in place. Note: If the Shoulder Pad is attached to the camera, you will need to push down on the Shoulder Pad with your hand or the magazine before i ...

  • ARRI 416 - page 11

    ARRIFLEX 416 Quick Guide 05/2006, Page 11 Changing Fps & Shutter Angle The NORM and PS/CCU buttons above the display select between preset Standard Speeds and user adjustable Programmable Speeds. Standard Speeds of 23.976, 24, 25, 29.97 & 30 fps are possible, while the Programmable Speed can be set anywhere from 1.000 - 75.000 fps. Note: If ...

  • ARRI 416 - page 12

    ARRIFLEX 416 Quick Guide 05/2006, Page 12 Beeper , Backlight & RGB ARRIGLOW Beeper The 416 is equipped with a beeper which can sound when the camera is started or stopped. The upper line of display mode 6 allows the user to decide whether and when the beeper sounds and how loud (LS is shown for ‘loudspeaker’). The left-hand bar shows the st ...

  • ARRI 416 - page 13

    ARRIFLEX 416 Quick Guide 05/2006, Page 13 On-board Batter y On-Board Batter y OBB-2 The OBB-2 On-Board Batter y attaches directly to the camera body by means of a quick change mechanism that can be easily operated with one hand. The OBB-2 incorporates a built-in power meter to indicate the state of charge, while an extra contact in the power connec ...

  • ARRI 416 - page 14

    ARRIFLEX 416 Quick Guide 05/2006, Page 14 MINI MONITOR connectors Integrated V ideo System Video out with data or Y–signal Clean Video out (no data) or C–signal Video lens IRIS Focus adjustment Flicker free on/off button White balance button Manual Gain Control button ENTER/INSERT button ON–OFF–CHECK/ HIDE MENU switch Up/down adjustment Ima ...

  • ARRI 416 - page 15

    ARRIFLEX 416 Quick Guide 05/2006, Page 15 Integrated V ideo System Automatic Gain Control • Press the MGC button to toggle between Manual Gain Control (LED on) and Automatic Gain Control (LED off). • When MGC is off, Automatic Gain Control will adjust the image brightness. Manual Gain Control • Press the MGC button to toggle between Manual Ga ...

  • ARRI 416 - page 16

    ARRIFLEX 416 Quick Guide 05/2006, Page 16 Accessories ...

  • ARRI 416 - page 17

    ARRIFLEX 416 Quick Guide 05/2006, Page 17 Accessories ...

  • ARRI 416 - page 18

    ARRIFLEX 416 Quick Guide 05/2006, Page 18 Note: T o write SMTPE timecode to film, ARRIFLEX 416 magazines must have the 416 Timecode Module fitted. Note: T imecode recording is only possible at the 5 Standard Speeds of 23.976, 24, 25, 29.97 & 30 fps. T urning Timecode Recording On and Of f. • Press the MODE key until the display shows mode 4. ...

  • ARRI 416 - page 19

    ARRIFLEX 416 Quick Guide 05/2006, Page 19 Timecode Sensitivity T able 16 mm Kodak Film Stocks Kodak 7201 (Color Negative) TCS 7 Kodak 7205 (Color Negative) TCS 6 Kodak 7212 (Color Negative) TCS 6 Kodak 7217 (Color Negative) TCS 6 Kodak 7218 (Color Negative) TCS 5 Kodak 7222 (B/W Negative) TCS 8 Kodak 7229 (Color Negative) TCS 5 Kodak 7231 (B/W Nega ...

  • ARRI 416 - page 20

    ARRIFLEX 416 Quick Guide 05/2006, Page 20 ARRI Gr oup Addresses Australia ARRI Australia PTY Limited (Sales, Ser vice & Rental) Unit 6C, 5 T alavera Road, Macquarie Park, Sydney . NSW 2113, Australia V oice phone: +61 (2) 9855 4300, F AX: +61 (2) 9855 4301 Email: info@arri.com.au Canada ARRI Canada Limited (Sales & Ser vice) 415 Horner A ve ...

Manufacturer ARRI Category Camcorder

Documents that we receive from a manufacturer of a ARRI 416 can be divided into several groups. They are, among others:
- ARRI technical drawings
- 416 manuals
- ARRI product data sheets
- information booklets
- or energy labels ARRI 416
All of them are important, but the most important information from the point of view of use of the device are in the user manual ARRI 416.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals ARRI 416, service manual, brief instructions and user manuals ARRI 416. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product ARRI 416.

Similar manuals

A complete manual for the device ARRI 416, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use ARRI 416 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of ARRI 416.

A complete ARRI manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual ARRI 416 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the ARRI 416, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the ARRI 416, that we can find in the current document
3. Tips how to use the basic functions of the device ARRI 416 - which should help us in our first steps of using ARRI 416
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with ARRI 416
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of ARRI 416 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning ARRI 416?

Use the form below

If you did not solve your problem by using a manual ARRI 416, ask a question using the form below. If a user had a similar problem with ARRI 416 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)