-
Tyco PC5O15 - page 1
Instruction Manual PC 5 O1 5 WARNING This manual contains info r mation on limitations r ega r ding p r oduct use and function and info r mation on the limitations as to liability of the manufactu r e r . The enti r e manual should be ca r efully r ead. ...
-
Tyco PC5O15 - page 2
WARNING Please Read Car efully Note to Installers This warning contains vital information. As the only individual in contact with system users, it is your responsibility to bring each item in this warning to the attention of the users of this system. System Failures This system has been carefully designed to be as effective as possible. There are c ...
-
Tyco PC5O15 - page 3
1 About Your Security System Your DSC Power832 Security System has been designed to provide you with the greatest possible flexibility and convenience. Read this manual carefully and have your installer instruct you on your system's operation and on which features have been implemented in your system. All users of this system should be equally ...
-
Tyco PC5O15 - page 4
2 System Information Fill out the following information for future reference and store this manual in a safe place. Access Codes Your Master Code is: __________________________________________ Additional Access Codes: 01 __________________ 09 ____________________ 17 ____________________ 2 5 ________________ 02 __________________ 10 ________________ ...
-
Tyco PC5O15 - page 5
3 15 ___________________________________________ _____________________________________ 16 ___________________________________________ _____________________________________ 17 ___________________________________________ _____________________________________ 18 ___________________________________________ _____________________________________ 19 _____ ...
-
Tyco PC5O15 - page 6
4 Access Codes Access codes are used to arm and disarm the system. There are 37 access codes available: 1 master code, 32 regular access codes, 2 duress codes and 2 partition master codes. Ask your installer for more information on using the duress and partition master codes. Only the Master Code can be used to program additional security codes and ...
-
Tyco PC5O15 - page 7
5 Alternate Arming Methods Away Arming Arming the system in the Away mode will have all interior zones and perimeter zones active. If motion is detected in the interior zones, or if one of the perimeter zones is violated, the alarm sequence will begin. To arm in the Away mode, enter your access code and exit the premises through a designated Exit/E ...
-
Tyco PC5O15 - page 8
6 Disarming the System Disarming from an LED or LCD5501Z Keypad: Enter the premises through a designated Exit/Entry door; entering by any other door will sound an immediate alarm. As soon as the Exit/Entry door is opened, the keypad will beep to indicate that the system should be disarmed. Go to the keypad and enter your access code. If an error is ...
-
Tyco PC5O15 - page 9
7 If An Alarm Sounds Fire Alarm If your system has been installed with fire detectors and the alarm sounds in a pulsing mode, follow your emergency evacuation plan immediately (see “Fire Escape Planning” on page 15). Intrusion Alarm If an intrusion alarm sounds, indicated by a continuous bell or siren, the alarm may be silenced by entering your ...
-
Tyco PC5O15 - page 10
8 8 PC5508(Z), PC5516(Z) and PC5532(Z) Keypads: Press the keys on the number pad to view alarms or troubles, to Arm/ Disarm the system or to bypass zones. To exit, press [#]; to select a function, press [ ✱ ]. Ready Light (All keypads) : If the Ready light is ON, the system is ready for arming. If the Ready light is OFF, check to see that all doo ...
-
Tyco PC5O15 - page 11
9 9 All Keypads: Function Keys (Stay, Away, Chime, Reset, Exit): If activated by your installer, these keys allow easy single button activation of the most commonly used features. For more information, talk to your alarm installer. Press both Keys for two seconds to send a FIRE transmission. Press both Keys for two seconds to send an AUXILIARY tran ...
-
Tyco PC5O15 - page 12
10 LCD5500(Z) Keypad: The Liquid Crystal Display (LCD) displays prompts and system information on two 16 character lines. If “< >” appears, more information can be accessed by using the arrow (< >) keys. Press [<] to see the previous function or item of information. Press [>] to advance the display to next function or item of ...
-
Tyco PC5O15 - page 13
11 Programming codes from an LCD Keypad: Master Code Press the [ ✱ ] key to enter the function list. Scroll (< >) to... Press [5] or [ ✱ ]. The display will read... Enter your current Master Code. The display will read... “01P” represents the first access code. Use the arrow (< >) keys to scroll to “40P” and press the [ ✱ ...
-
Tyco PC5O15 - page 14
12 Zone Bypassing The zone bypassing function is used when access is needed to part of the protected area while the system is armed. Zones which are temporarily out of service due to damaged wiring or contacts may be bypassed to allow system arming until repairs can be made. Bypassed zones will not cause an alarm. Zones cannot be bypassed once the ...
-
Tyco PC5O15 - page 15
13 Additional Zone Bypassing Features To recall the last set of bypassed zones, press [ ✱ ][1][9][9]. Arm the system. The Bypass light will turn on to indicate that zones are bypassed. To clear all bypassed zones, press [ ✱ ][1][0][0]. Viewing Trouble Conditions The control panel continuously monitors a number of possible trouble conditions. If ...
-
Tyco PC5O15 - page 16
14 To view troubles from an LCD Keypad: From the Ready state, use the arrow (< >) keys to scroll to the following message. Press [ ✱ ] [2] to view the trouble. The message will read... Use the arrow (< >) keys to view which troubles are present on the system. Once you have scrolled through the list of troubles, press the [#] key to ex ...
-
Tyco PC5O15 - page 17
15 5. If the panel has any fire zones, activation will cause the alarm signal to sound in a pulsed mode. CAUTION: Do not use an open flame or burning materials to test a smoke or heat detector. Contact your installer for information on safe methods of testing detectors. 6. When testing is complete, call and advise the central station. Should the sy ...
-
Tyco PC5O15 - page 18
16 >) keys to scroll through all of the events in the buffer. When you have finished viewing the events, press [#] to exit. Downloading Enable To enable a six-hour downloading window from any system keypad, enter [ ✱ ] [6] [Master code] [5]. During this time, the panel will answer incoming downloading calls. For more information, please ask yo ...
-
Tyco PC5O15 - page 19
17 Fire Escape Planning There is often very little time between the detection of a fire and the time it becomes deadly. It is thus very important that a family escape plan be developed and rehearsed. 1. Every family member should participate in developing the escape plan. 2. Study the possible escape routes from each location within the house. Sinc ...
-
Tyco PC5O15 - page 20
18 NOTES ...
-
Tyco PC5O15 - page 21
19 NOTES ...
-
Tyco PC5O15 - page 22
AVIS: L’étiquette de l’Industrie Canada identifie le matériel homologué. Cette étiquette certifie que le matériel est conforme à certaines normes de protection, d’exploitation et de sécurité des réseaux de télécommunications. Industrie Canada n’assure toutefois pas que le matériel fonctionnera à la satisfaction de l’utilisate ...
-
Tyco PC5O15 - page 23
...
-
Tyco PC5O15 - page 24
Digital Security Controls Ltd. ’ s liability for failure to repair the product under this warranty after a reasonable number of attempts will be limited to a replacement of the product, as the exclusive remedy for breach of warrant y . Under no circumstances shall Digi- tal Security Controls Ltd. be liable for any special, incidental, or conseque ...
Do you have a question concerning Tyco PC5O15?
Use the form below
If you did not solve your problem by using a manual Tyco PC5O15, ask a question using the form below. If a user had a similar problem with Tyco PC5O15 it is likely that he will want to share the way to solve it.