English dropdown-ico

Manual Hubbell LX-1500

12 pages 0.12 mb
Download

Go to site of 12

Summary
  • Hubbell LX-1500 - page 1

    April, 2000 Hubbell Industrial Controls, Inc. A subsidiary of Hubbell Incorporated 50 Edwards St. Madison, OH 44057 Telephone (440) 428-1161 FAX (440) 428-7635 Instruction Manual Fire Pump Controller Model LX-1500 Limited Service Electric Publication No. 197 HUBBELL ...

  • Hubbell LX-1500 - page 2

    Limited Service Fire Pump Controller Page 2 of 12 Table of Contents I Introduction .................................................................................................................................. 3 II Specifications and Certifications ................................................................................................ ...

  • Hubbell LX-1500 - page 3

    Limited Service Fire Pump Controller Page 3 of 12 I Introduction The Hubbell Limited Service Fire Pump Controller provides automatic and manual control of small electric motor driven fire pumps and booster pumps of 30 horsepower or less. All Controller components are inside the cabinet with indicating lights and switch handles located next to the d ...

  • Hubbell LX-1500 - page 4

    Limited Service Fire Pump Controller Page 4 of 12 Undervoltage Trip 15% below set point Time Delays Pick-up, 1.5 s, fixed Drop-out, 1.5 s, fixed Output Relays 10 A, 120 VAC 5 A, 240 VAC Indication green LED, on for A-B-C phase rotation Surge Suppressor 650 V rating Temperature Operating: − 4 ° F to 104 ° F ( − 20 ° C to 40 ° C) Storage: − ...

  • Hubbell LX-1500 - page 5

    Limited Service Fire Pump Controller Page 5 of 12 Caution: Before drilling and punching holes in the cabinet for wiring connections, cover the components inside the cabinet with a protective covering. Debris may cause shorts or prevent operation of components. 6. Punch holes in the top or the bottom of the cabinet for conduit. 7. Connect the water ...

  • Hubbell LX-1500 - page 6

    Limited Service Fire Pump Controller Page 6 of 12 still timing, the CR relay remains energized and the motor continues to run for the duration of the timer setting. Pressing the STOP push button stops the motor even if TR1 is timing. If the Controller does not have a TR1 timing relay, the pump motor runs until the STOP push button is pressed. Manua ...

  • Hubbell LX-1500 - page 7

    Limited Service Fire Pump Controller Page 7 of 12 VI Start Up Procedure Danger: Shocks, burns, or death may result from high voltage. Caution: Only personnel who are familiar with the power distribution system and this manual should be allowed to perform this procedure. 1. Verify that the motor nameplate horsepower and voltage match the Controller ...

  • Hubbell LX-1500 - page 8

    Limited Service Fire Pump Controller Page 8 of 12 11. Press the STOP push button to stop the motor. 12. Start and stop the motor with the EMERGENCY MANUAL CONTROL handle. Push and rotate the T-handle in a quick motion to lock the contactor in the ON position to start. Rotate the T-handle clockwise and release to stop the motor. Caution: Failure to ...

  • Hubbell LX-1500 - page 9

    Limited Service Fire Pump Controller Page 9 of 12 VII Maintenance Danger: Do not open the Controller cabinet until ALL power is disconnected. Shocks, burns, or death may result from high voltage. Caution: Only personnel who are familiar with the power distribution system and this manual should be allowed to inspect or perform maintenance on the Con ...

  • Hubbell LX-1500 - page 10

    Limited Service Fire Pump Controller Page 10 of 12 Coil and Contact Replacement Coil Retainers Coil Spring Clip Magnet Assembly Figure VI -1 Magnet Assembly and Retainers Coil Replacement* Contact Replacement* 1. Isolate all power sources. Complete steps 1 through 5 in left column. 2. While pressing against the coil, pull up slightly on the coil re ...

  • Hubbell LX-1500 - page 11

    Limited Service Fire Pump Controller Page 11 of 12 VIII Limited Service Fire Pump Controller Parts Spares Symbol Description Function Part No. 1 1 CR, LRSR LK, PFR, PRR High Voltage Relay 2-Pole Relay Starting Relay Control Relay 31658141 31658123 2 FU1, FU2 Fuse, 1 A, MDL-1 Control Power 57361726 1 TR1 Timing Relay, octal Min. Run Time 31658111 Oc ...

  • Hubbell LX-1500 - page 12

    Limited Service Fire Pump Controller Page 12 of 12 Spares Symbol Description Function Part No. CB ( Note 3 ) Breaker, 15 A Breaker, 20 A Breaker, 25 A Breaker, 30 A Breaker, 40 A Breaker, 50 A Breaker, 60 A Breaker, 70 A Breaker, 90 A Breaker, 110 A Breaker, 125 A Breaker, 150 A Circuit Breaker Discounting Means 57504463 57504373 57504371 57504103 ...

Manufacturer Hubbell Category Heat Pump

Documents that we receive from a manufacturer of a Hubbell LX-1500 can be divided into several groups. They are, among others:
- Hubbell technical drawings
- LX-1500 manuals
- Hubbell product data sheets
- information booklets
- or energy labels Hubbell LX-1500
All of them are important, but the most important information from the point of view of use of the device are in the user manual Hubbell LX-1500.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Hubbell LX-1500, service manual, brief instructions and user manuals Hubbell LX-1500. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Hubbell LX-1500.

Similar manuals

A complete manual for the device Hubbell LX-1500, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Hubbell LX-1500 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Hubbell LX-1500.

A complete Hubbell manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Hubbell LX-1500 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Hubbell LX-1500, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Hubbell LX-1500, that we can find in the current document
3. Tips how to use the basic functions of the device Hubbell LX-1500 - which should help us in our first steps of using Hubbell LX-1500
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Hubbell LX-1500
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Hubbell LX-1500 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Hubbell LX-1500?

Use the form below

If you did not solve your problem by using a manual Hubbell LX-1500, ask a question using the form below. If a user had a similar problem with Hubbell LX-1500 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)