English dropdown-ico

Manual Cisco Systems ONS 15540

32 pages 0.49 mb
Download

Go to site of 32

Summary
  • Cisco Systems ONS 15540 - page 1

    CHAPTER 2-1 Optical Transport Turn-Up and Test Guide 78-14964-01 2 Quick Installation Procedures This chapter describes procedures for installing essential hardware components. This section describes common hardware installation tasks. Refer to the Cisco ONS 15540 ESP Har dwar e Installation Guide or the Cisco ONS 15540 ESPx Har dwar e Installation ...

  • Cisco Systems ONS 15540 - page 2

    2-2 Optical Transport Turn-Up and Test Guide 78-14964-01 Chapter 2 Quick Installation Procedures Installing Cisco ONS 15540 ESP Hardware Perform this procedure to install the Cisco ONS 15540 ESP chassis in a standard 19-inch rack: Step 1 Place the L brackets on the sides of the chassis. Step 2 Secure the L brackets to the chassis using the 14 M4 Ph ...

  • Cisco Systems ONS 15540 - page 3

    2-3 Optical Transport Turn-Up and Test Guide 78-14964-01 Chapter 2 Quick Installation Procedures Installing Cisco ONS 15540 ESP Hardware Perform the following procedure to install the processor card in the Cisco ONS 15540 ESP. Step 1 Insert the processor card carefully into chassis slot 6. Guide the upper and lower edges of the motherboard or proce ...

  • Cisco Systems ONS 15540 - page 4

    2-4 Optical Transport Turn-Up and Test Guide 78-14964-01 Chapter 2 Quick Installation Procedures Installing Cisco ONS 15540 ESP Hardware T o install a redundant processor card, perform the next procedure. For more details about using the Console Ports, NME Ports, and Auxiliary Ports of the processor card, refer to the Cisco ONS 15540 ESP Conf igura ...

  • Cisco Systems ONS 15540 - page 5

    2-5 Optical Transport Turn-Up and Test Guide 78-14964-01 Chapter 2 Quick Installation Procedures Installing Cisco ONS 15540 ESP Hardware Installing Mux/Demux Motherboards and Mux/Demux Modules The Cisco ONS 15540 ESP chassis uses one optical mux/demux motherboard for unprotected operation or two per system for protected operation. Installing Mux/De ...

  • Cisco Systems ONS 15540 - page 6

    2-6 Optical Transport Turn-Up and Test Guide 78-14964-01 Chapter 2 Quick Installation Procedures Installing Cisco ONS 15540 ESP Hardware Installing 4-Channel or 8-Channel Mux/Demux Modules This section describes the procedure for installing a 4-channel or 8-channel mux/demux module in the Cisco ONS 15540 ESP. T o install the module, follow these st ...

  • Cisco Systems ONS 15540 - page 7

    2-7 Optical Transport Turn-Up and Test Guide 78-14964-01 Chapter 2 Quick Installation Procedures Installing Cisco ONS 15540 ESP Hardware T ransponders are av ailable in single-mode, and multimode. Line card motherboards are available with or without splitter protection. Note In Cisco ONS 15540 ESP systems, there are additional rules for slot placem ...

  • Cisco Systems ONS 15540 - page 8

    2-8 Optical Transport Turn-Up and Test Guide 78-14964-01 Chapter 2 Quick Installation Procedures Installing Cisco ONS 15540 ESP Hardware Installing SM Transponder Modules or MM Transponder Modules Perform the follo wing procedure to install SM transponder modules or MM transponder modules. Step 1 Remov e the dust covers from the module, and clean t ...

  • Cisco Systems ONS 15540 - page 9

    2-9 Optical Transport Turn-Up and Test Guide 78-14964-01 Chapter 2 Quick Installation Procedures Installing Cisco ONS 15540 ESP Hardware Step 3 Lift the latch handle on the extended range transponder module and insert the module carefully into the motherboard slot while guiding the upper and lo wer edges of the module in the tracks until its connec ...

  • Cisco Systems ONS 15540 - page 10

    2-10 Optical Transport Turn-Up and Test Guide 78-14964-01 Chapter 2 Quick Installation Procedures Installing Cisco ONS 15540 ESPx Hardware Connecting Mux/Demux Module and OSC Ports Perform the follo wing steps to connect the motherboard and module. Use MU-MU connectors (short f iber length) to connect OSC ports of the motherboard to OSC In and OSC ...

  • Cisco Systems ONS 15540 - page 11

    2-11 Optical Transport Turn-Up and Test Guide 78-14964-01 Chapter 2 Quick Installation Procedures Installing Cisco ONS 15540 ESPx Hardware Preparing to Install the Chassis Perform this procedure to install the Cisco ONS 15540 ESPx chassis in a standard 19-inch rack: Step 1 Place the L brackets on the sides of the chassis. Step 2 Secure the L bracke ...

  • Cisco Systems ONS 15540 - page 12

    2-12 Optical Transport Turn-Up and Test Guide 78-14964-01 Chapter 2 Quick Installation Procedures Installing Cisco ONS 15540 ESPx Hardware Installing Cross Connect Drawers The process for installing the cable storage and cross connect drawers is the same. The order of placement beneath the chassis is important, and the drawers should be installed i ...

  • Cisco Systems ONS 15540 - page 13

    2-13 Optical Transport Turn-Up and Test Guide 78-14964-01 Chapter 2 Quick Installation Procedures Installing Cisco ONS 15540 ESPx Hardware Installing the Vertical Cable Guides V ertical cable guides for the Cisco ONS 15540 ESPx are installed onto the rack next to the cross connect drawers. The y are used to guide and hold down the cables from the l ...

  • Cisco Systems ONS 15540 - page 14

    2-14 Optical Transport Turn-Up and Test Guide 78-14964-01 Chapter 2 Quick Installation Procedures Installing Cisco ONS 15540 ESPx Hardware T o install a redundant processor card, perform the next procedure. For more details about using the Console Ports, NME Ports, and Auxiliary Ports of the processor card refer to the Cisco ONS 15540 ESPx Conf igu ...

  • Cisco Systems ONS 15540 - page 15

    2-15 Optical Transport Turn-Up and Test Guide 78-14964-01 Chapter 2 Quick Installation Procedures Installing Cisco ONS 15540 ESPx Hardware Connecting the Console Port The console port is a female, DCE (data communications equipment), DB-25 receptacle used for connection to a console terminal or modem. T o connect cables to the console port, follow ...

  • Cisco Systems ONS 15540 - page 16

    2-16 Optical Transport Turn-Up and Test Guide 78-14964-01 Chapter 2 Quick Installation Procedures Installing Cisco ONS 15540 ESPx Hardware T o install the module, follow these steps: Step 1 Remov e the dust covers from the module, and clean the optical connectors. See the “Cleaning Optical Connectors” section on page 2-28 . Caution W ear ground ...

  • Cisco Systems ONS 15540 - page 17

    2-17 Optical Transport Turn-Up and Test Guide 78-14964-01 Chapter 2 Quick Installation Procedures Installing Cisco ONS 15540 ESPx Hardware Installing Line Card Motherboards and Transponder Modules Y ou can install up to eight hot-swappable line card motherboards in slots 2 to 5 and 8 to 11 of the Cisco ONS 15540 ESPx chassis. Each line card motherb ...

  • Cisco Systems ONS 15540 - page 18

    2-18 Optical Transport Turn-Up and Test Guide 78-14964-01 Chapter 2 Quick Installation Procedures Installing Cisco ONS 15540 ESPx Hardware Step 3 Use the handles to push the line card motherboard in until it is fully seated in the backplane connector . Step 4 Install blank cov ers into the unused motherboard slots. T able 2-8 lists the LEDs on the ...

  • Cisco Systems ONS 15540 - page 19

    2-19 Optical Transport Turn-Up and Test Guide 78-14964-01 Chapter 2 Quick Installation Procedures Installing Cisco ONS 15540 ESPx Hardware Installing Extended Range Transponder Modules Perform this procedure to install extended range transponder modules. Step 1 Remov e the dust covers from the module, and clean the optical connectors. See the “Cl ...

  • Cisco Systems ONS 15540 - page 20

    2-20 Optical Transport Turn-Up and Test Guide 78-14964-01 Chapter 2 Quick Installation Procedures Installing Cisco ONS 15540 ESPx Hardware Cabling Mux/Demux Modules This section describes the connections between pairs of mux/demux modules and between mux/demux modules and mux/demux motherboards in the Cisco ONS 15540 ESPx. The assumption is made th ...

  • Cisco Systems ONS 15540 - page 21

    2-21 Optical Transport Turn-Up and Test Guide 78-14964-01 Chapter 2 Quick Installation Procedures Installing Cisco ONS 15540 ESPx Hardware Cabling Directly with Cable Storage Drawers T o connect the Cisco ONS 15540 ESPx directly , follow these steps: Step 1 Open the cable storage drawer by pushing the tabs in to release the lock on the dra wer ( Fi ...

  • Cisco Systems ONS 15540 - page 22

    2-22 Optical Transport Turn-Up and Test Guide 78-14964-01 Chapter 2 Quick Installation Procedures Installing Cisco ONS 15540 ESPx Hardware Step 2 Pull out the cable storage drawer ( Figure 2-2 on page 2-22 ). Figur e 2-2 Pulling out the Cable Stor age Dr aw er 79725 ...

  • Cisco Systems ONS 15540 - page 23

    2-23 Optical Transport Turn-Up and Test Guide 78-14964-01 Chapter 2 Quick Installation Procedures Installing Cisco ONS 15540 ESPx Hardware Step 3 Lock the drawer in the open position by pushing the latch at the back left of the dra wer down into the locked position ( Figure 2-3 on page 2-23 ). Figur e 2-3 Locking the Dr aw er Step 4 Use the MTP cab ...

  • Cisco Systems ONS 15540 - page 24

    2-24 Optical Transport Turn-Up and Test Guide 78-14964-01 Chapter 2 Quick Installation Procedures Installing Cisco ONS 15540 ESPx Hardware of the right of the cable storage drawer , enter the cross connect drawers through the right side, and connect to their destination connector . The breakout cables are color coded and should be matched to their ...

  • Cisco Systems ONS 15540 - page 25

    2-25 Optical Transport Turn-Up and Test Guide 78-14964-01 Chapter 2 Quick Installation Procedures Installing Cisco ONS 15540 ESPx Hardware Figure 2-5 sho ws an unprotected conf iguration using four line card motherboards. Figur e 2-5 Cross Connect Dr awer on the Cisco ONS 15540 ESPx with 16-Channel Line Card Motherboard - T o W est Mux/Demux T o Ea ...

  • Cisco Systems ONS 15540 - page 26

    2-26 Optical Transport Turn-Up and Test Guide 78-14964-01 Chapter 2 Quick Installation Procedures Installing Cisco ONS 15540 ESPx Hardware Figure 2-6 sho ws the cross connect drawer on the Cisco ONS 15540 ESPx. Figur e 2-6 Cross Connect Dr awer on the Cisco ONS 15540 ESPx - Perform the follo wing procedure to connect through the cross connect drawe ...

  • Cisco Systems ONS 15540 - page 27

    2-27 Optical Transport Turn-Up and Test Guide 78-14964-01 Chapter 2 Quick Installation Procedures Common Installation Procedures Step 14 Connect the MU breakout end of the cable to the bottom half of the desired adapter mux/demux connections on the inner side of the cross connect panel. These are color coded and should be connected by matching the ...

  • Cisco Systems ONS 15540 - page 28

    2-28 Optical Transport Turn-Up and Test Guide 78-14964-01 Chapter 2 Quick Installation Procedures Common Installation Procedures T o ground the shelf, follow these steps: Step 1 Use a wire-stripping tool to remov e approximately 0.75 inch (20 mm) of the covering from the end of the grounding wire. Step 2 Insert the stripped end of the grounding wir ...

  • Cisco Systems ONS 15540 - page 29

    2-29 Optical Transport Turn-Up and Test Guide 78-14964-01 Chapter 2 Quick Installation Procedures Common Installation Procedures Caution Use extreme care when remo ving or installing connectors so you do not damage the connector housing or scratch the end-face surface of the f iber . Always install f iller modules on unused or disconnected componen ...

  • Cisco Systems ONS 15540 - page 30

    2-30 Optical Transport Turn-Up and Test Guide 78-14964-01 Chapter 2 Quick Installation Procedures Common Installation Procedures Verifying the Power Up Once you hav e met the conditions in the “Powering Up the Chassis” section, po wer up the system. The CLI (command-line interface) prompts you to enter the initial conf iguration dialog. Answer ...

  • Cisco Systems ONS 15540 - page 31

    2-31 Optical Transport Turn-Up and Test Guide 78-14964-01 Chapter 2 Quick Installation Procedures Common Installation Procedures 1/2 15540-MDXA-08C0= 74-2657-01 A1 ANX06040003 01/21/2002 1.0 1/3 MA-MDXA-08D0 30-1317-01 2 401118 06/21/2001 1.0 2/* 15540-LCMB-0100= 73-5813-05 02 CAB0525J5VB 02/15/2001 5.1 2/0 15540-TSP1-01B3= 68-XXXX-XX 02 CAB0537KE7 ...

  • Cisco Systems ONS 15540 - page 32

    2-32 Optical Transport Turn-Up and Test Guide 78-14964-01 Chapter 2 Quick Installation Procedures Common Installation Procedures ...

Manufacturer Cisco Systems Category Server

Documents that we receive from a manufacturer of a Cisco Systems ONS 15540 can be divided into several groups. They are, among others:
- Cisco Systems technical drawings
- ONS 15540 manuals
- Cisco Systems product data sheets
- information booklets
- or energy labels Cisco Systems ONS 15540
All of them are important, but the most important information from the point of view of use of the device are in the user manual Cisco Systems ONS 15540.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Cisco Systems ONS 15540, service manual, brief instructions and user manuals Cisco Systems ONS 15540. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Cisco Systems ONS 15540.

Similar manuals

A complete manual for the device Cisco Systems ONS 15540, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Cisco Systems ONS 15540 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Cisco Systems ONS 15540.

A complete Cisco Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Cisco Systems ONS 15540 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Cisco Systems ONS 15540, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Cisco Systems ONS 15540, that we can find in the current document
3. Tips how to use the basic functions of the device Cisco Systems ONS 15540 - which should help us in our first steps of using Cisco Systems ONS 15540
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Cisco Systems ONS 15540
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Cisco Systems ONS 15540 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Cisco Systems ONS 15540?

Use the form below

If you did not solve your problem by using a manual Cisco Systems ONS 15540, ask a question using the form below. If a user had a similar problem with Cisco Systems ONS 15540 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)