English dropdown-ico

Manual Sitecom WLE-1100

72 pages Not applicable
Download

Go to site of 72

Summary
  • Sitecom WLE-1100 - page 1

    I nstallation guide WLE-1100INT_QIG_20131127.indd 1-2 09-01-14 16:09 ...

  • Sitecom WLE-1100 - page 2

    P ack age cont ent 3x SmartPlugs Sitecom and NET2GRID Many energy suppliers off er a way to gain insights in to your energy use. W e believe that you don ’t hav e to be tied to a supplier to gain insights into your ener gy use. NET2GRID provides an easy solution to measure and monit or your home’ s energy consumption. That’ s why we have par ...

  • Sitecom WLE-1100 - page 3

    SmartPlug LED Smartplug Pairing and On/Off button Smar tPlug • Pairing mode: LED blinking red/green, r eady to connect to smar tbridge. • Smartplug ON: LED is solid green / Smar tplug OFF: LED is off . Choose y our installa tion metho d Option 1) With the SmartBridge Option 2) With the Energy Insight app Option 3) With a w eb browser EN WLE-1 ...

  • Sitecom WLE-1100 - page 4

    Install y our Smar tPlugs with the Smar tBridge 1 Plug the SmartPlugs into a power socket . OPTION • Make sure to use power sockets close t o the Smar tBridge for installation. • After successful installation you can mo ve the Smar tPlugs anywhere in your house . 1 EN ! Check if the SmartPlug LEDs are green. If not press the button to turn on t ...

  • Sitecom WLE-1100 - page 5

    Push the button on each of the three SmartPlugs for 5 seconds until the LED starts to blink green and red. 2 3 Disconnect your SmartBridge from the wall socket. press 5 sec. press 5 sec. press 5 sec. EN WLE-1100INT_QIG_20131127.indd 9-10 09-01-14 16:09 ...

  • Sitecom WLE-1100 - page 6

    Plug the power adapt er of your Smar tBridge back into a wall socket . 4 When the LED’ s turn solid blue your SmartBridge is ready . 5 EN WLE-1100INT_QIG_20131127.indd 11-12 09-01-14 16:09 ...

  • Sitecom WLE-1100 - page 7

    Check that the LEDs of the SmartPlugs have turned solid green. • Now you can mov e the Smar tPlugs and plug in the devices you would like to measur e. 6 EN • The button can now be used to turn the plugs on and off . WLE-1100INT_QIG_20131127.indd 13-14 09-01-14 16:09 ...

  • Sitecom WLE-1100 - page 8

    Plug the SmartPlugs into a power socket . • Make sure to use power sockets close t o the Smar tBridge for installation. • After successful installation you can mo ve the Smar tPlugs anywhere in your house . 1 Install y our Smar tPlugs with the Energy Insigh t app 2 OPTION EN ! Check if the SmartPlug LEDs are green. If not press the button to tu ...

  • Sitecom WLE-1100 - page 9

    Open the Energy Insight app on your smartphone. 3 Push the button on each of the SmartPlugs for 5 seconds until the LED starts to blink green and red. 2 press 5 sec. press 5 sec. press 5 sec. iOS Android EN WLE-1100INT_QIG_20131127.indd 17-18 09-01-14 16:09 ...

  • Sitecom WLE-1100 - page 10

    Click “Scan ” . 4 While scanning, the SmartBridge will blink white. When the LED’ s turn solid blue your Smar tBridge is ready . 5 iOS Android EN WLE-1100INT_QIG_20131127.indd 19-20 09-01-14 16:09 ...

  • Sitecom WLE-1100 - page 11

    Check that the LEDs of the SmartPlugs have turned solid green. 6 • Now you can mov e the Smar tPlugs and plug in the devices you would like to measur e. EN • The button can now be used to turn the plugs on and off . WLE-1100INT_QIG_20131127.indd 21-22 09-01-14 16:09 ...

  • Sitecom WLE-1100 - page 12

    Plug the SmartPlugs into a power socket . 1 • Make sure to use power sockets close t o the Smar tBridge for installation. • After successful installation you can mo ve the Smar tPlugs anywhere in your house . W ith a web br ow ser 3 OPTION EN ! Check if the SmartPlug LEDs are green. If not press the button to turn on the SmartPlug. WLE-1100INT_ ...

  • Sitecom WLE-1100 - page 13

    Open your web br owser and go to http://smartbridge.local 3 Push the button on each of the SmartPlugs for 5 seconds until the LED starts to blink green and red. 2 press 5 sec. press 5 sec. press 5 sec. EN WLE-1100INT_QIG_20131127.indd 25-26 09-01-14 16:09 ...

  • Sitecom WLE-1100 - page 14

    Click “ scan” . 4 While scanning, the SmartBridge will blink white. When the LED’ s turn solid blue your Smar tBridge is ready . 5 EN WLE-1100INT_QIG_20131127.indd 27-28 09-01-14 16:09 ...

  • Sitecom WLE-1100 - page 15

    Check that the LEDs of the SmartPlugs have turned solid green. 6 • Now you can mov e the Smar tPlugs and plug in the devices you would like to measur e. EN • The button can now be used to turn the plugs on and off . WLE-1100INT_QIG_20131127.indd 29-30 09-01-14 16:09 ...

  • Sitecom WLE-1100 - page 16

    V erpak kingsinhoud 3x SmartPlugs Sitecom en NET2GRID V eel energieleveranciers bieden je een manier om inzicht t e k rijgen in je energieverbruik. Wij vinden echter da t je hier voor niet gebonden hoeft te zijn aan een leverancier . NET2GRID biedt je een een voudige oplossing waarmee je het energieverbruik van je w oning kunt meten ongeacht je ene ...

  • Sitecom WLE-1100 - page 17

    SmartPlug LED Smartplug Pairing en Aan/Uit knop Smar tPlug • Pairing mode: Kniperende LED (rood/groen). K laar om te verbinden met SmartBridge. • Smartplug AAN: LED is continu groen / Smartplug UIT: LED is uit. Kies een installa tiemetho de Optie 1) Via de SmartBridge Optie 2) Via de Energy Insight app Optie 3) Via de w ebbrowser NL WLE-1100INT ...

  • Sitecom WLE-1100 - page 18

    Installeer de Smar tPlugs met de Smar tBridge 1 Plaats de SmartPlugs in een stopcontact. OPTIE • Tijdens de installatie is het handig om de Smar tPlugs in een stopcontact te plaatsen dicht bij de SmartBridge. • Na een succesvolle installatie kan je de SmartPlugs verplaatsen. 1 NL Controleer of de led op de SmartPlug gr oen brandt. Als dit niet ...

  • Sitecom WLE-1100 - page 19

    Druk op de knop op iedere Smar tPlug voor 5 sec onden totdat de LED groen en rood br andt. 2 3 Haal de stroomadapter van de SmartBridge uit het stopcontact. Druk 5 sec. Druk 5 sec. Druk 5 sec. NL WLE-1100INT_QIG_20131127.indd 37-38 09-01-14 16:09 ...

  • Sitecom WLE-1100 - page 20

    Plaats de stroomadapter v an de Smar tBridge terug in het stopcontact. 4 W anneer de LED van de Smar tBridge continue blauw brandt , is deze klaar . 5 NL WLE-1100INT_QIG_20131127.indd 39-40 09-01-14 16:09 ...

  • Sitecom WLE-1100 - page 21

    Contr oleer of the LED ’ s van de SmartPlugs continue groen branden. • Nu kan je de Smar tPlugs verplaatsen. Plaats de apparaten die je wilt c ontroleren in de SmartPlugs. 6 NL • De button kan nu gebruikt worden om de plugs aan en uit te schakelen. WLE-1100INT_QIG_20131127.indd 41-42 09-01-14 16:09 ...

  • Sitecom WLE-1100 - page 22

    Installeer de SmartPlugs via de Energy Insight app 2 OPTIE NL Plaats de SmartPlugs in een stopcontact. • Tijdens de installatie is het handig om de Smar tPlugs in een stopcontact te plaatsen dicht bij de SmartBridge. • Na een succesvolle installatie kan je de SmartPlugs verplaatsen. 1 Controleer of de led op de SmartPlug gr oen brandt. Als dit ...

  • Sitecom WLE-1100 - page 23

    Open de Energy Insight app op je smartphone 3 iOS Android NL Druk op de knop op iedere Smar tPlug voor 5 sec onden totdat de LED groen en rood br andt. 2 Druk 5 sec. Druk 5 sec. Druk 5 sec. WLE-1100INT_QIG_20131127.indd 45-46 09-01-14 16:09 ...

  • Sitecom WLE-1100 - page 24

    Klik op “Scan ” . 4 Tijdens het scannen, knippert de LED van de Smar tBirdge wit. W anneer de LED van de Smar tBridge continue blauw brandt , is deze klaar . 5 is deze klaar . iOS Android NL WLE-1100INT_QIG_20131127.indd 47-48 09-01-14 16:09 ...

  • Sitecom WLE-1100 - page 25

    NL Contr oleer of the LED ’ s van de SmartPlugs continue groen branden. • Nu kan je de Smar tPlugs verplaatsen. Plaats de apparaten die je wilt c ontroleren in de SmartPlugs. 6 • De button kan nu gebruikt worden om de plugs aan en uit te schakelen. WLE-1100INT_QIG_20131127.indd 49-50 09-01-14 16:09 ...

  • Sitecom WLE-1100 - page 26

    V ia de webbr ow ser 3 OPTIE NL Plaats de SmartPlugs in een stopcontact. • Tijdens de installatie is het handig om de Smar tPlugs in een stopcontact te plaatsen dicht bij de SmartBridge. • Na een succesvolle installatie kan je de SmartPlugs verplaatsen. 1 Controleer of de led op de SmartPlug gr oen brandt. Als dit niet het geval is, druk op de ...

  • Sitecom WLE-1100 - page 27

    Open je webbrow ser en ga naar http://smar tbridge.local 3 NL Druk op de knop op iedere Smar tPlug voor 5 sec onden totdat de LED groen en rood br andt. 2 Druk 5 sec. Druk 5 sec. Druk 5 sec. WLE-1100INT_QIG_20131127.indd 53-54 09-01-14 16:09 ...

  • Sitecom WLE-1100 - page 28

    Klik op “Scan ” . 4 Tijdens het scannen knippert de LED van de Smar tBirdge wit. W anneer de LED van de SmartBridge continue blauw brandt, is deze klaar . 5 is deze klaar . NL WLE-1100INT_QIG_20131127.indd 55-56 09-01-14 16:10 ...

  • Sitecom WLE-1100 - page 29

    NL Contr oleer of the LED ’ s van de SmartPlugs continue groen branden. • Nu kan je de Smar tPlugs verplaatsen. Plaats de apparaten die je wilt c ontroleren in de SmartPlugs. 6 • De button kan nu gebruikt worden om de plugs aan en uit te schakelen. WLE-1100INT_QIG_20131127.indd 57-58 09-01-14 16:10 ...

  • Sitecom WLE-1100 - page 30

    V erpackungsinhalt 3x SmartPlugs home en ergy moni tor 3x SmartPlugs E x tension Pack DE Sitecom und NET2GRID Viele Energieversorger biet en ihren Kunden eine Möglichkeit, einen Einblick in ihren Energiev erbrauch zu erhalten. Wir sind jedoch der Ansicht, dass Sie sich für diese Inf ormationen nicht an einen Energieanbieter binden müssen. Mit NE ...

  • Sitecom WLE-1100 - page 31

    W ählen Sie eine Methode um I hr e Smar tPlugs zu installier en Option 1) Mit der Smar tBride Option 2) Mit der Energy I nsight App Option 3) Mit dem Webbr owser DE SmartPlug LED SmartPlug Pairing und An/Aus T aste Smar tPlug • Pairing mode: LED blinkt r ot/grün, zum V erbindungsaufbau bereit. • SmartPlug an: LED ist konstant grün / Smar tPl ...

  • Sitecom WLE-1100 - page 32

    Mit der Smar tBride 1 OPTION 1 DE Schließen Sie die Smar tPlugs an eine Steckdose an. • Die Steckdosen sollten sich in der Nähe der SmartBridge benden. • Nach Abschluss der Installation können Sie die SmartPlugs frei im Haus bewegen. ! Kontrollieren Sie, ob die SmartPlug LEDS grün leuchten. F alls nicht, drücken Sie die T aste um den Sm ...

  • Sitecom WLE-1100 - page 33

    Halten Sie die T aste an jedem SmartPlug 5 Sekunden lang gedrückt, bis die LEDs grün und rot blinken. 2 3 Ziehen Sie die SmartBridge aus der Steckdose. T aste 5 Sek. drücken T aste 5 Sek. drücken T aste 5 Sek. drücken DE WLE-1100INT_QIG_20131127.indd 65-66 09-01-14 16:10 ...

  • Sitecom WLE-1100 - page 34

    Schließen Sie das Netzteil der SmartBridge wieder an eine Steckdose an. 4 W enn die LED blau leuchtet, funktioniert die Smar tBridge ordnungsgemäß. 5 DE WLE-1100INT_QIG_20131127.indd 67-68 09-01-14 16:10 ...

  • Sitecom WLE-1100 - page 35

    V ergewissern Sie sich, dass die LEDs der SmartPlugs grün leuchten. 6 DE • Nun können Sie Geräte an die SmartPlugs anschließen, deren Energieverbrauch Sie messen möchten. • Die T aste kann nun genutzt werden um die SmartPlugs an und aus zu schalten. WLE-1100INT_QIG_20131127.indd 69-70 09-01-14 16:10 ...

  • Sitecom WLE-1100 - page 36

    1 Mit der Energy Insight A pp 2 OPTION DE Schließen Sie die Smar tPlugs an eine Steckdose an. • Die Steckdosen sollten sich in der Nähe der SmartBridge benden. • Nach Abschluss der Installation können Sie die SmartPlugs frei im Haus bewegen. ! Kontrollieren Sie, ob die SmartPlug LEDS grün leuchten. F alls nicht, drücken Sie die T aste u ...

  • Sitecom WLE-1100 - page 37

    Ö nen Sie die Energy Insight App auf Ihrem Smartphone. 3 2 iOS Android DE Halten Sie die T aste an jedem SmartPlug 5 Sekunden lang gedrückt, bis die LEDs grün und rot blinken. T aste 5 Sek. drücken T aste 5 Sek. drücken T aste 5 Sek. drücken WLE-1100INT_QIG_20131127.indd 73-74 09-01-14 16:10 ...

  • Sitecom WLE-1100 - page 38

    Klicken Sie in der App auf “Scan“ . 4 iOS Android DE W enn die LED blau leuchtet, funktioniert die Smar tBridge ordnungsgemäß. 5 WLE-1100INT_QIG_20131127.indd 75-76 09-01-14 16:10 ...

  • Sitecom WLE-1100 - page 39

    6 DE V ergewissern Sie sich, dass die LEDs der SmartPlugs grün leuchten. • Nun können Sie Geräte an die SmartPlugs anschließen, deren Energieverbrauch Sie messen möchten. • Die T aste kann nun genutzt werden um die SmartPlugs an und aus zu schalten. WLE-1100INT_QIG_20131127.indd 77-78 09-01-14 16:10 ...

  • Sitecom WLE-1100 - page 40

    1 Mit dem W ebbr ow ser 3 OPTION DE Schließen Sie die Smar tPlugs an eine Steckdose an. • Die Steckdosen sollten sich in der Nähe der SmartBridge benden. • Nach Abschluss der Installation können Sie die SmartPlugs frei im Haus bewegen. ! Kontrollieren Sie, ob die SmartPlug LEDS grün leuchten. F alls nicht, drücken Sie die T aste um den ...

  • Sitecom WLE-1100 - page 41

    Önen Sie Ihren Browser , und rufen Sie die Seite http:// smartplug.local auf . 3 2 DE Halten Sie die T aste an jedem SmartPlug 5 Sekunden lang gedrückt, bis die LEDs grün und rot blinken. T aste 5 Sek. drücken T aste 5 Sek. drücken T aste 5 Sek. drücken WLE-1100INT_QIG_20131127.indd 81-82 09-01-14 16:10 ...

  • Sitecom WLE-1100 - page 42

    Klicken Sie im Brow ser auf “Scan“ . 4 5 DE W enn die LED blau leuchtet, funktioniert die Smar tBridge ordnungsgemäß. WLE-1100INT_QIG_20131127.indd 83-84 09-01-14 16:10 ...

  • Sitecom WLE-1100 - page 43

    6 DE V ergewissern Sie sich, dass die LEDs der SmartPlugs grün leuchten. • Nun können Sie Geräte an die SmartPlugs anschließen, deren Energieverbrauch Sie messen möchten. • Die T aste kann nun genutzt werden um die SmartPlugs an und aus zu schalten. WLE-1100INT_QIG_20131127.indd 85-86 09-01-14 16:10 ...

  • Sitecom WLE-1100 - page 44

    Con tenuto 3x SmartPlugs Sitecom e NET2GRID Molti fornitori energetici off rono un modo per capire quanta energ ia si sta c onsumando. Ma secondo noi, per capire quanta energia stai consumando non hai bisogno di esser e legato a un fornitore. NET2GRID off re una soluzione semplice per misurar e e monitorare i consumi energetici di casa. È per qu ...

  • Sitecom WLE-1100 - page 45

    Scegli il tuo met o do di installazione Opzione 1) Con il SmartBridge Opzione 2) Con l’applicazione Ener gy I nsight Opzione 3) Con un bro wser Internet IT SmartPlug LED Pulsante ac coppiamento SmartPlug e On/O ff Smar tPlug • Modalità accoppiamento: LED lampeggiante r osso/verde, pronto alla c onnessione con lo SmartBridge. • SmartPlug ON: ...

  • Sitecom WLE-1100 - page 46

    C on il Smar tBridge 1 OPZIONE 1 IT Collega gli SmartPlug a una presa di corren te. • Ricordati di usare due prese di c orrente vicine allo SmartBr idge per l’ installazione. • Al termine dell’ installazione, potrai spostare gli SmartPlug in qualsiasi punto della casa. Controlli se i LED dello SmartPlug sono verdi. Se non lo sono , prema il ...

  • Sitecom WLE-1100 - page 47

    Tieni premut o per 5 secondi il tasto di ciascuno degli SmartPlug nché non lampeggiano prima il LED verde e poi quello r osso. 2 3 Scollega lo SmartBridge dalla presa di corrente . premere 5 sec. premere 5 sec. premere 5 sec. IT WLE-1100INT_QIG_20131127.indd 93-94 09-01-14 16:10 ...

  • Sitecom WLE-1100 - page 48

    Ricollega l’alimenta tore dello Smar tBridge a una presa di corr ente. 4 Quando il LED diventa blu  sso , signi ca che lo SmartBridge funziona correttament e. 5 IT WLE-1100INT_QIG_20131127.indd 95-96 09-01-14 16:10 ...

  • Sitecom WLE-1100 - page 49

    V eri ca che i LED degli SmartPlug siano verdi  ssi. • Ora puoi spostare gli SmartPlug e collegare i dispositivi da misurare . 6 IT • Il pulsante può ora essere usato per acc endere o spegnere le spine. WLE-1100INT_QIG_20131127.indd 97-98 09-01-14 16:10 ...

  • Sitecom WLE-1100 - page 50

    1 C on l’ applicazione Energy Insigh t 2 IT OPZIONE Collega gli SmartPlug a una presa di corren te. • Ricordati di usare due prese di c orrente vicine allo SmartBr idge per l’ installazione. • Al termine dell’ installazione, potrai spostare gli SmartPlug in qualsiasi punto della casa. Controlli se i LED dello SmartPlug sono verdi. Se non ...

  • Sitecom WLE-1100 - page 51

    Apri l’applicazione NET2GRID Energy Insight sullo smar tphone. 3 iOS Android IT 2 premere 5 sec. premere 5 sec. premere 5 sec. Tieni premut o per 5 secondi il tasto di ciascuno degli SmartPlug  nché non lampeggiano prima il LED verde e poi quello rosso . WLE-1100INT_QIG_20131127.indd 101-102 09-01-14 16:10 ...

  • Sitecom WLE-1100 - page 52

    Passa all’ applicazione e fai clic su “Cer ca” . 4 iOS Android IT Quando il LED diventa blu  sso , signi ca che lo SmartBridge funziona correttament e. 5 WLE-1100INT_QIG_20131127.indd 103-104 09-01-14 16:10 ...

  • Sitecom WLE-1100 - page 53

    IT V eri ca che i LED degli SmartPlug siano verdi  ssi. • Ora puoi spostare gli SmartPlug e collegare i dispositivi da misurare . 6 • Il pulsante può ora essere usato per acc endere o spegnere le spine. WLE-1100INT_QIG_20131127.indd 105-106 09-01-14 16:10 ...

  • Sitecom WLE-1100 - page 54

    1 C on un bro w ser Internet 3 IT OPZIONE Collega gli SmartPlug a una presa di corren te. • Ricordati di usare due prese di c orrente vicine allo SmartBr idge per l’ installazione. • Al termine dell’ installazione, potrai spostare gli SmartPlug in qualsiasi punto della casa. Controlli se i LED dello SmartPlug sono verdi. Se non lo sono , pr ...

  • Sitecom WLE-1100 - page 55

    Apri il brow ser W eb e vai al sito http://smartbridge.local 3 IT 2 premere 5 sec. premere 5 sec. premere 5 sec. Tieni premut o per 5 secondi il tasto di ciascuno degli SmartPlug nché non lampeggiano prima il LED verde e poi quello r osso. WLE-1100INT_QIG_20131127.indd 109-110 09-01-14 16:10 ...

  • Sitecom WLE-1100 - page 56

    F ai clic su “S can ” . 4 IT Quando il LED diventa blu  sso , signi ca che lo SmartBridge funziona correttament e. 5 WLE-1100INT_QIG_20131127.indd 111-112 09-01-14 16:11 ...

  • Sitecom WLE-1100 - page 57

    IT V eri ca che i LED degli SmartPlug siano verdi  ssi. • Ora puoi spostare gli SmartPlug e collegare i dispositivi da misurare . 6 • Il pulsante può ora essere usato per acc endere o spegnere le spine. WLE-1100INT_QIG_20131127.indd 113-114 09-01-14 16:11 ...

  • Sitecom WLE-1100 - page 58

    ES Con tenido 3x SmartPlugs Sitecom y NET2GRID Muchos prov eedores de ener gía ofrecen un modo de llevar el control de su gasto energético. Creemos que no debe estar atado a un proveedor para llevar el contr ol de su gasto energético . NET2GRID ofrece una solución sencilla para medir y contr olar el c onsumo energético de su hogar . P or ello ...

  • Sitecom WLE-1100 - page 59

    ES Smar tPlug Elija el método de instalación Opción 1) Con el SmartBridge Opción 2) Con la aplicación Energy Insight Opción 3) Con un nav egador web LED SmartPlug Emparejamiento del SmartPlug y botón de encendido / apagado • Modo de emparejamiento: LED destella en rojo/v erde, está listo para conectarse al SmartBridge. • SmartPlug encen ...

  • Sitecom WLE-1100 - page 60

    C on el Smar tBridge 1 OPCIÓN 1 ES Enchufe los SmartPlugs en una toma de corriente . • Asegúrese de utilizar dos tomas de c orr iente cercanas al Smar tBridge para la instalación. • Después de realizar la instalación correctamente, puede mov er los Smar tPlugs a cualquier lugar del hogar . ! Compruebe si el LED de los SmartPlugs es de colo ...

  • Sitecom WLE-1100 - page 61

    Pulse el botón en cada uno de los SmartPlugs durante 5 segundos hasta que el LED comience a parpadear en v erde y rojo. 2 3 Desconecte su SmartBridge de la toma de corriente. pulse 5 seg. pulse 5 seg. pulse 5 seg. ES WLE-1100INT_QIG_20131127.indd 121-122 09-01-14 16:11 ...

  • Sitecom WLE-1100 - page 62

    Enchufe el adaptador de potencia de su SmartBridge de nuevo en una toma de corriente . 4 Cuando el LED sea de color azul  jo , su Smar tBridge estará correctamente instalado . 5 ES WLE-1100INT_QIG_20131127.indd 123-124 09-01-14 16:11 ...

  • Sitecom WLE-1100 - page 63

    Compruebe que los LED de los SmartPlugs sean de color verde  jo . • Ahora puede mover los SmartPlugs y enchufarlos a los dispositivos que desee medir . 6 ES • El botón se puede utilizar ahora para encender y apagar los SmartPlugs. WLE-1100INT_QIG_20131127.indd 125-126 09-01-14 16:11 ...

  • Sitecom WLE-1100 - page 64

    1 C on la aplicación Energy Insigh t 2 ES OPCIÓN Enchufe los SmartPlugs en una toma de corriente . • Asegúrese de utilizar dos tomas de c orr iente cercanas al Smar tBridge para la instalación. • Después de realizar la instalación correctamente, puede mov er los Smar tPlugs a cualquier lugar del hogar . ! Compruebe si el LED de los SmartP ...

  • Sitecom WLE-1100 - page 65

    Abra la aplicación Energy Insight de su teléf ono inteligente e inicie sesión. 3 Pulse el botón en cada uno de los SmartPlugs durante 5 segundos hasta que el LED comience a parpadear en v erde y rojo. 2 iOS Android ES pulse 5 seg. pulse 5 seg. pulse 5 seg. WLE-1100INT_QIG_20131127.indd 129-130 09-01-14 16:11 ...

  • Sitecom WLE-1100 - page 66

    Haga clic en “Buscar ” . 4 5 iOS Android ES Cuando el LED sea de color azul  jo , su Smar tBridge estará correctamente instalado . WLE-1100INT_QIG_20131127.indd 131-132 09-01-14 16:11 ...

  • Sitecom WLE-1100 - page 67

    6 ES Compruebe que los LED de los SmartPlugs sean de color verde  jo . • Ahora puede mover los SmartPlugs y enchufarlos a los dispositivos que desee medir . • El botón se puede utilizar ahora para encender y apagar los SmartPlugs. WLE-1100INT_QIG_20131127.indd 133-134 09-01-14 16:11 ...

  • Sitecom WLE-1100 - page 68

    1 C on un na v egador web 3 ES OPCIÓN Enchufe los SmartPlugs en una toma de corriente . • Asegúrese de utilizar dos tomas de c orr iente cercanas al Smar tBridge para la instalación. • Después de realizar la instalación correctamente, puede mov er los Smar tPlugs a cualquier lugar del hogar . ! Compruebe si el LED de los SmartPlugs es de c ...

  • Sitecom WLE-1100 - page 69

    Abra su nav egador web y vaya a http://smartbridge.local 3 2 ES Pulse el botón en cada uno de los SmartPlugs durante 5 segundos hasta que el LED comience a parpadear en v erde y rojo. pulse 5 seg. pulse 5 seg. pulse 5 seg. WLE-1100INT_QIG_20131127.indd 137-138 09-01-14 16:11 ...

  • Sitecom WLE-1100 - page 70

    Haga clic en “Scan” 4 5 ES Cuando el LED sea de color azul  jo , su Smar tBridge estará correctamente instalado . WLE-1100INT_QIG_20131127.indd 139-140 09-01-14 16:11 ...

  • Sitecom WLE-1100 - page 71

    6 ES Compruebe que los LED de los SmartPlugs sean de color verde  jo . • Ahora puede mover los SmartPlugs y enchufarlos a los dispositivos que desee medir . • El botón se puede utilizar ahora para encender y apagar los SmartPlugs. WLE-1100INT_QIG_20131127.indd 141-142 09-01-14 16:11 ...

  • Sitecom WLE-1100 - page 72

    ww w .sitecom.com/helpdesk WLE-1100INT_QIG_20131127.indd 143-144 09-01-14 16:11 ...

Manufacturer Sitecom Category Energy cost meter

Documents that we receive from a manufacturer of a Sitecom WLE-1100 can be divided into several groups. They are, among others:
- Sitecom technical drawings
- WLE-1100 manuals
- Sitecom product data sheets
- information booklets
- or energy labels Sitecom WLE-1100
All of them are important, but the most important information from the point of view of use of the device are in the user manual Sitecom WLE-1100.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Sitecom WLE-1100, service manual, brief instructions and user manuals Sitecom WLE-1100. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Sitecom WLE-1100.

Similar manuals

A complete manual for the device Sitecom WLE-1100, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Sitecom WLE-1100 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Sitecom WLE-1100.

A complete Sitecom manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Sitecom WLE-1100 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Sitecom WLE-1100, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Sitecom WLE-1100, that we can find in the current document
3. Tips how to use the basic functions of the device Sitecom WLE-1100 - which should help us in our first steps of using Sitecom WLE-1100
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Sitecom WLE-1100
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Sitecom WLE-1100 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Sitecom WLE-1100?

Use the form below

If you did not solve your problem by using a manual Sitecom WLE-1100, ask a question using the form below. If a user had a similar problem with Sitecom WLE-1100 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)