English dropdown-ico

Manual Texas Instruments 5000

286 pages 5.85 mb
Download

Go to site of 286

Summary
  • Texas Instruments 5000 - page 1

    Maintenance Manual TravelMate  5000 Series Notebook Computers 9786166-0001 March 1995 ...

  • Texas Instruments 5000 - page 2

    Copyright (©) 1995 T exas Instruments Incorporated All Rights Reserved — Printed in U.S.A. T ravelMate TM 5000 Series Notebook Computers Maintenance Manual TI Part No. 9786166-0001 Original Issue: March 1995 Changes may be made periodically to the information in this publication. Such changes will be incorporated in new editions of this manual. ...

  • Texas Instruments 5000 - page 3

    Contents Preface 1 General Description 1.1 . . . . Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 1.2 . . . . Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 1.2.1 . . . MultiMedia Features . . . . . . . . . . . . . . . . . . . . . . 1-4 1.2.2 . . . Dual Intelligent Battery Packs . . . . . ...

  • Texas Instruments 5000 - page 4

    1.7 . . . . Notebook Physical Description . . . . . . . . . . . . . . . . . 1-26 1.7.1 . . . Cover -Display Assembly . . . . . . . . . . . . . . . . . . . . 1-27 1.7.2 . . . System Base Assembly . . . . . . . . . . . . . . . . . . . . . 1-28 1.8 . . . . Notebook Functional Overview . . . . . . . . . . . . . . . . . 1-29 1.8.1 . . . System Processor ...

  • Texas Instruments 5000 - page 5

    2.6.5 . . . Installing Exter nal Headphone/Microphones . . . . 2-17 2.6.6 . . . Installing Devices With IR Interface . . . . . . . . . . . 2-18 2.7 . . . . Installing the AC Power Adapter . . . . . . . . . . . . . . . . 2-19 2.8 . . . . Initial System Checkout . . . . . . . . . . . . . . . . . . . . . . 2-20 2.9 . . . . Configuring the System . . . ...

  • Texas Instruments 5000 - page 6

    4.2.4 . . . PCMCIA Modem Problems . . . . . . . . . . . . . . . . . . 4-10 4.2.5 . . . Fault Isolation Using Diagnostics . . . . . . . . . . . . 4-10 5 Field Service 5.1 . . . . Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1 5.2 . . . . Preventive Maintenance . . . . . . . . . . . . . . . . . . . . . . . 5-1 5.2.1 . ...

  • Texas Instruments 5000 - page 7

    6 Illustrated Parts Listing 6.1 . . . . Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1 6.2 . . . . TM5000 Pentium, 10.4 TFT 810HD, Domestic . . . . . . . Notebook with Pack, P/N 9798842-0001 . . . . . . . . . . 6-2 6.2.1 . . . TM5000, 10.4 TFT Color , 810HD, Domestic . . . . . . . Unit Assembly, P/N 9798843, Parts Li ...

  • Texas Instruments 5000 - page 8

    D.2 . . . . Memory Areas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-1 D.2.1 . . . Extended Memory . . . . . . . . . . . . . . . . . . . . . . . . D-2 D.2.2 . . . Expanded Memory . . . . . . . . . . . . . . . . . . . . . . . . D-2 D.3 . . . . Memory Device Drivers . . . . . . . . . . . . . . . . . . . . . . . D-3 D.3.1 . . . Insta ...

  • Texas Instruments 5000 - page 9

    F .12 . . . Function F Ah - Subfunction 03h . . . . . . . Get Video Information . . . . . . . . . . . . . . . . . . . . . . . F-9 F .13 . . . Function F Ah - Subfunction 05h . . . . . . . Get Setup Infor mation . . . . . . . . . . . . . . . . . . . . . . . F-12 G BIOS Updates G.1 . . . . Introduction . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Texas Instruments 5000 - page 10

    Illustrations Figure T itle Page No. 2-4 . . . . Installing PCMCIA Options . . . . . . . . . . . . . . . . . . . . 2-6 2-5 . . . . Installing the Optional PS/2 Numeric Keypad . . . . . . 2-7 2-6 . . . . Installing the Exter nal Microphone and . . . . . . . . . . . 2-8 2-7 . . . . Opening the Notebook Connector Covers . . . . . . . . . . 2-9 2-8 . . ...

  • Texas Instruments 5000 - page 11

    Illustrations Figure T itle Page No. 5-9 . . . . Opening the Base Cover . . . . . . . . . . . . . . . . . . . . . . 5-15 5-10 . . . Keyscan Board, Removal/Replacement . . . . . . . . . . . 5-16 5-11 . . . IR Board, Removal/Replacement . . . . . . . . . . . . . . . . 5-17 5-12 . . . Floppy Drive, Removal/Replacement . . . . . . . . . . . . . 5-18 5- ...

  • Texas Instruments 5000 - page 12

    Illustrations Figure T itle Page No. 7-3 . . . . Keyscan Board, P/N 9786209, Logic Diagram . . . . . . . (5 Sheets) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-36 7-4 . . . . Sleep Switch Board, P/N 9786148, Logic Diagram . . 7-41 7-5 . . . . IR Board, P/ N 9798813, Logic Diagram (2 Sheets). . . 7-42 7-6 . . . . LED Board, P ...

  • Texas Instruments 5000 - page 13

    T ables T able T itle Page No. 1-1 . . . . T ravelMate 5000 Series Notebook Domestic/ . . . . . . . Inter national Configurations . . . . . . . . . . . . . . . . . . 1-24 1-2 . . . . T ravelMate 5000 Series Notebook Specifications . . . . 1-41 4-1 . . . . Self-T est Error Messages . . . . . . . . . . . . . . . . . . . . . . 4-6 4-2 . . . . Self T e ...

  • Texas Instruments 5000 - page 14

    T ables T able T itle Page No. E-2 . . . . Exter nal Monitors Extended VGA Modes . . . . . . . . . . E-2 E-3 . . . . Standard VGA LCD-Only Video Modes . . . . . . . . . . . E-5 E-4 . . . . Extended LCD-Only Video Modes . . . . . . . . . . . . . . . E-6 E-5 . . . . Standard SimulSCAN Video Modes . . . . . . . . . . . . . . E-6 E-6 . . . . Extended S ...

  • Texas Instruments 5000 - page 15

    Pr eface Introduction This manual contains operation, installation and maintenance instructions for the Texas Instruments T ravelMate 5000 Series Notebook Computers. This preface introduces the contents of the manual and lists and describes all related publications. Intended Audience This manual is primarily intended for use by qualified service te ...

  • Texas Instruments 5000 - page 16

    Contents This manual contains seven sections and seven appendices including: • Section 1: General Description — Introduces the TravelMate 5000 series Notebook Computers and identifies all standard and optional features. This section also provides a functional overview of notebook computer operation, identifies the major assemblies and subassemb ...

  • Texas Instruments 5000 - page 17

    Other Manuals About the Notebook Computer The following documents provide additional infor mation about the T ravelMate 5000 Series Computers: • TravelMate 5000 Series Notebook Computers Quick Start Manual, TI P/N 9786164-0001 - provides the basic information needed for first-time users to configure and begin using the notebook. • TravelMate 50 ...

  • Texas Instruments 5000 - page 18

    1 General Description 1.1 Introduction This manual contains field and factory level servicing information for the T ravelMate  5000 Series of Notebook Computers (Figure 1-1), manufactured by Texas Instruments, Incorporated. This section provides a general overview of the T ravelMate 5000 Series of Notebook Computers, describes the standard and o ...

  • Texas Instruments 5000 - page 19

    TM5000 P en tiu m Note bo ok Pent ium No teboo k Do cked t o EZ -Dock Plus Po rt Re plic ator Figure 1-1 TravelMate 5000 Series Notebook Computers 1-2 General Description ...

  • Texas Instruments 5000 - page 20

    1.2 Product Overview The T ravelMate 5000 Series Notebook Computers are high per formance, multimedia notebooks powered by the Intel P54-C Pentium tm superscalar processor with built-in co-processor and dual, on-chip, 16KB data and instruction caches. The 3-volt, Pentium chip, packaged in the TAB TCP format, generates a 75 MHz clock processing rate ...

  • Texas Instruments 5000 - page 21

    All members of the TM5000 family come standard with 8MB of 70-ns page-interleaved, DRAM on the main board (expandable to 32MB with user -installable RAM Expansion Boards based on 16M DRAM technology). The Basic Input Output System (BIOS) fir mware for the main system and for the VGA BIOS is stored on a 256K x 8 Flash reprogrammable Flash ROM. A Boo ...

  • Texas Instruments 5000 - page 22

    Co ver Latch, Le ft Cove r Latch, Right Exte rn al PS/2 Mo u se or Exte rnal PS/2 Ke ypad Optio n Pe n tiu m P54- C Pr oce s s or (Internal) Two PC M CI A Op t i on Sl ot s 1.44MB Floppy D ri v e Infra-Red Interface Built-i n Mi cr ophone 4mm, 83/8 4 Key Keyboar d The Point (Int ern al Mouse ) Dual Inte lligent Battery P acks Built-I n Speaker Pr o ...

  • Texas Instruments 5000 - page 23

    1.2.2 Dual Intelligent Battery Packs The TM5000 notebook series support the use of two hot plugable intelligent battery packs (with front panel charge remaining indicators) that allow for battery removal and replacement while the system is operational (as long as one battery contains a partial charge). The notebooks use rechargeable Lithium-Ion (Li ...

  • Texas Instruments 5000 - page 24

    1.2.3 Standard Peripherals As standard features, the TM5000 notebooks include a built-in 3.5 " Floppy Drive and a user -replaceable, Hard Disk Drive. (Initially, either 810 Million Byte drive or 524 million Byte Drive). The hard drive uses the Fast IDE inter face (with a 128 KB buffer) and has an average access time of 12 milliseconds or less. ...

  • Texas Instruments 5000 - page 25

    1.2.4 Preloaded Softwar e All members of the TM5000 family are preloaded with the following system software: • DOS v6.2 Operating System (or later version) • Windows for Workgroups v3.11 (or later version) • Advanced BatteryPro Power Management • Jazz 16 Sound Control software • Phoenix PCMCIA PhoenixCard Manager Plus tm (for installing P ...

  • Texas Instruments 5000 - page 26

    1.2.5 Preloaded Online Documentation The TM5000 Series Notebooks are also factory-loaded with the following online manuals: • TravelMate 5000 Series Notebook User’s Guide Super Shutdown Pass word Util ity FLAS H R OM BIOS MS -DO S O perat ing Syst em Mi c ros oft Wi ndow s Batte ryPro TI Util iti e s PC-Do ctor Diagnostics Diagno stic s Dro p-N ...

  • Texas Instruments 5000 - page 27

    • TravelMate 5000 Series Notebook Computers Online User’s Reference Manual, TI P/N 9786167-0001- provides more comprehensive application loading and configuration instructions for the TM5000 Series Notebook Computers. • MS-DOS User’s Guide • Windows User’s Guide • PC-Doctor Technical Reference Manual- provides user instructions for th ...

  • Texas Instruments 5000 - page 28

    User -Repla ceable Har d Driv e ( Unit i nit ially equi pped wit h 810 Dr ive ) PS/2 Port (Ex ternal PS/2 Keyboard or Mou se; or 101 -Ty pe Ke yboard with adapter) RAM Expan sion Cap ab ilities (User Installable Options to A dd Additional 8MB or up to 24MB of fa st RAM Memor y) E xter nal Mic rop hone Inpu t Jac k Aud io In (From CD ROM Pla yer , T ...

  • Texas Instruments 5000 - page 29

    As new versions of BIOS become available, they can be downloaded into Flash ROM from floppy disk without physically having to replace the ROMs. (See Appendix G for details.) Two Port Replicator system options are also available to simplify removing/installing the notebook into a desktop environment: • EZ-Dock Plus Port Replicator • EZ-Dock Port ...

  • Texas Instruments 5000 - page 30

    Attache s to Ex pa nsion Bus and VGA Port on th e Rear of the TM5000 Series No tebook SCS I Port RS- 2 32 Se ria l Po rt Bi- Dire c t io nal Par a lle l Po r t Exter nal VG A Mo ni t or Por t MIDI/Gam e Port PS/2 Keyb oar d Port Two PC M CIA S l ots (Typ e II I) Note: The EZ-Dock Po rt Replicator d oes no t have t he enhanc eme nt s (SCSI, PCMCIA, ...

  • Texas Instruments 5000 - page 31

    1.2.6.2 EZ-Dock Port Replicator The EZ-Dock Port Replicator includes the multi-port adapter features of EZ-Dock Plus (serial, parallel, exter nal keyboard, external mouse, exter nal VGA monitor connectors) but does not include the additional features (PCMCIA, SCSI and multi-media support features). The two port replicator s have the same footprint ...

  • Texas Instruments 5000 - page 32

    As shown in Figure 1-2, the Pentium version of the TM5000 Notebook also contains a higher per formance hard disk subsystem. The IDE hard disk drive is inter faced to the VL local bus and achieves I/O operations in the 11 million to 14 million operations per second. 1.3.2 ROM Memory All versions of the TM5000 notebook family use a "Flash" ...

  • Texas Instruments 5000 - page 33

    1.3.3 Hard Disk Subsystem The TM5000 Notebook family features a user -replaceable, 2.5 inch, (initially either 810 million byte or 524 million byte capacity) enhanced IDE inter face Hard Disk Drive. Both drives have a 128KB buffer and can transfer data in or out of the buf fer at a 4.5 MB/second rate across the ISA Inter face using the 2 of 7 RLL c ...

  • Texas Instruments 5000 - page 34

    • Special Keys for the following: • Setup Menu ( Fn-ESC ) • Standby Mode ( Fn-F4 ) • Scroll Lock Mode ( Fn-F6 ) • Num Lock Mode ( Fn-F7 ) • Real-T ime Sound V olume Adjustment ( CTRL-ALT-U or CTRL-ALT-D ) • Real-T ime CPU Speed Adjustment ( CTRL-ALT-UP/DOWN Arrow ) • Separate keys for Page Up, Page Down, F11 and F12 plus inverted &q ...

  • Texas Instruments 5000 - page 35

    1.3.6 Video Display Subsystem The initial of fering of the TM5000 Series Notebook Family contains a built-in TSTN (T riple Super Twist Nematic) active matrix color LCD with CCFT (Cold Cathode Fluorescent Tube). The LCD has a VGA compatible resolution of 640 by 480 pixels. All members of the TM5000 family support simultaneous LCD and exter nal VGA d ...

  • Texas Instruments 5000 - page 36

    1.3.8 Exter nal Ports The TM5000 Notebook contains extern al connectors on the left, right and rear of the notebook as shown in Figure 1-11. Sound, power and external keyboard connectors are located on the left side of the notebook; the back of the unit contains connectors for a parallel printer , exter nal VGA monitor , serial com, and expansion d ...

  • Texas Instruments 5000 - page 37

    1.3.8.1 Bi-Directional Parallel Port The TM5000 notebooks include a 25-pin Parallel Printer Port with EPP/ECP bi-directional modes. The parallel port is implemented using a standard 25-pin, female, D-subminiature connector . 1.3.8.2 External VGA Port The exter nal VGA port is implemented with a high density, 15-p in female, D-subminiature connector ...

  • Texas Instruments 5000 - page 38

    1.3.8.6 PCI Expansion Bus Inter face The TM5000 Notebook is equipped with a 160-pin PCI expansion bus that includes the PCI bus, VESA V ideo Feature interface, MIDI inter face, Power Control and Plug N Play inter faces. 1.4 Notebook Expansion Capabilities The notebook computer can be equipped with the following field-installab le options: • 8 MB ...

  • Texas Instruments 5000 - page 39

    • 8 MB Shuttle Memory Option Kit (TI Part No. 9798816-0003) - This Kit installs on one of the other RAM Module optio ns (expands RAM to 32MB if installed on 16MB RAM Option boards) These RAM expansion kits are user -installed as detailed in Section 2. 1.4.2 Headset and Microphone Option Kit The Headset and Microphone Option Kit, Part No. 9793399- ...

  • Texas Instruments 5000 - page 40

    1.4.6 Notebook Carrying Case Options The following carrying cases are available for the TM5000 Notebook Computer: • Leather Portfolio (TI P/N 2567028-0001) - carries only the notebook • Deluxe Carrying Case (TI P/N 2568069-0001) - carries the notebook and smaller accessories. • Executive Briefcase (TI P/N 9793372-0001) - a larger carrying cas ...

  • Texas Instruments 5000 - page 41

    1.5.2 Diagnostics Program The TM5000 Series Notebooks are shipped with PC-Doctor , a power ful diagnostics tool that deter mines the hardware configuration of a local or remote system, benchmarks the system’s per formance, analyzes the per formance of all subsystems, and per for ms a suite of interactive and non-interactive tests on attached devi ...

  • Texas Instruments 5000 - page 42

    T able 1-1. T ravelMate 5000 Series Notebook Domestic/International Configurations (continued) Configuration Dash No. Ger man Configuration -0003 French Configuration -0004 Spanish Configuration -0005 Swiss/Ger man Configuration -0006 Italian Configuration -0007 Portuguese Configuration -0008 W ester n European Configuration -0009 Swedish Configura ...

  • Texas Instruments 5000 - page 43

    1.7 Notebook Physical Description The T ravelMate 5000 Series Notebooks are modular in design and can be disassembled for maintenance purposes using a set of TORX TM head, Phillips head, and straight slot screwd rivers as described in Section 5 of this manual. Mechanically, the Notebook Computer consists of two major assemblies including the Cover ...

  • Texas Instruments 5000 - page 44

    1.7.1 Cover-Display Assembly The Cover -Display Assembly contains the LCD screen, power inverter circuits, and associated control circuitry. The assembly, shown in Figure 1-14, contains four major components including: • LCD Display • Microphone Assembly • Inverter Board • Display Adapter Board The Cover -Display Assembly attaches to the Sy ...

  • Texas Instruments 5000 - page 45

    1.7.2 System Base Assembly As shown in Figure 1-15, the System Base Assembly houses a variety of field-replaceable subassemblies and components including: • Main Board Assembly • PCMCIA/Sound Board Assembly • Sleep Switch Board Assembly • LED Board Assembly • Infrared Board Assembly • Keyscan Board Assembly • Keyboard Assembly • Har ...

  • Texas Instruments 5000 - page 46

    1.8 Notebook Functional Overview The T ravelMate 5000 Series Notebooks consist of eight major functions or sections including: • System Processor- implemented on Main Board • Memory Subsystem- implemented on Main Board • I/O Subsystem- implemented on Main Board • Keyboard Subsystem- implemented on part of Main Board, Key Scan Board, and Key ...

  • Texas Instruments 5000 - page 47

    Figure 1-16 TM5000 Series, Functional Block Diagram 1-30 General Description ...

  • Texas Instruments 5000 - page 48

    1.8.1 System Processor The System Processor function for the notebook is implemented on the Main Board using an Intel Pentium P54-C Superscalar Processor Chip. The processor operates in conjunction with RAM and ROM Memory and other control logic (E.G. the ACC2056 IC) to process software instructions (BIOS, DOS, Windows, Applications). The processor ...

  • Texas Instruments 5000 - page 49

    1.8.3 I/O Subsystem The I/O ASIC on the Main Board and an SMC 37C665 GT Combo I/O Controller Chip control all "AT"-type I/O peripherals. Two cascaded DMA controllers and two cascaded interrupt processors on the I/O ASIC support transfers between memory and the 8-bit and 16-bit peripherals (via the Combo Controller). The support ed I/O int ...

  • Texas Instruments 5000 - page 50

    addition to power ful multi-media capabilities, the video controller offers full hardware and BIOS compatibility with the IBM VGA standard. 1.8.6 Exter nal VGA Capability All members of the TM5000 notebook family provide a 15-pin, female, D-type, exter nal VGA connector that can be connected to an extern al video graphics adapter (VGA) type monitor ...

  • Texas Instruments 5000 - page 51

    1.8.8 Pointing Device Subsystem The pointing device subsystem (Figure 1-17) consists of the built-in "Point" device on the keyboard and a pre-programmed 82c752 micro-controller that inter faces the mouse device to the main board. An exter nal PS/2 port also supports the use of an exter nal PS/2 compatible mouse. 1.8.9 Keyboard Subsystem T ...

  • Texas Instruments 5000 - page 52

    • Integrated numeric keypad • "Inverted T" Cursor Control K ey Layout • Special Keys for the following: • Setup Menu (Fn-ESC) • Standby Mode (Fn-F4) • Real-T ime Sound V olume Adjustment ( CTRL-ALT-U or CTRL-ALT-D) • Real-T ime CPU Speed Adjustment ( CTRL-ALT-UP/DOWN Arrow ) • Separate keys for Page Up, Page Down, F11 and ...

  • Texas Instruments 5000 - page 53

    1.8.9.1 LED Displays As shown in Figure 1-19, the T ravelMate 5000 Series N otebook Computers contain a set of three LED displays just above the keyboard including: • Caps Lock indicator. This LED indicates that the keyboard is locked in the uppercase mode. To switch to the lowercase mode, press the Caps Lock key. • Num Lock indicator. This LED ...

  • Texas Instruments 5000 - page 54

    1.8.10 Hard Disk Subsystem The Hard Disk Subsystem, implemented on the Main Board and on the associated hard disk drive module, provides disk storage for all system software and user files. Depending on the model, the notebook is equipped with an 810 million byte, 1/2" hard drive or other high capacity drive. The disk controller for all models ...

  • Texas Instruments 5000 - page 55

    c Caution: Format ting the disk drive erases any data that ma y be stored on the disk. Therefore do not attempt a format of the hard disk unless the computer self-test and diagnostics confirm that the disk has not been formatted. A Hard Drive activity LED is located along the front edge o f the notebook (See Figure 1-19). This LED lights during har ...

  • Texas Instruments 5000 - page 56

    1.8.12.1 AC Power Adapter The computer is equipped with a universal AC power adapter that converts AC voltage (100 to 240 V AC, 50 to 60 Hz) into DC voltage used to operate the notebook and charge the batteries. The adapter also supplies suf ficient power to drive an attached EZ-Dock or EZ-Dock Plus Port Replicator option that may be attached to th ...

  • Texas Instruments 5000 - page 57

    The outputs of the Power Supply Section include: • +3 VDC at 3 Amps • +5 VDC at 5 Amps • +12 VDC at 60 Milliamps (Flash memory) 1.8.12.5 Inverter Board Assembly The Inverter Board Assembly, located in the Cover Display Assembly, converts the +5 VDC input from the Power Supply Section of the Main Board into a high vol tage AC output used to li ...

  • Texas Instruments 5000 - page 58

    1.9 T ravelMate 5000 Series Notebook Specifications Specifications for the T ravelMate 5000 Series Notebooks are provided in Table 1-2. Table 1-2 TravelMate 5000 Series Notebook Specifications Functional Characteristics Characteristics Specification Processor Pentium Model Intel P54-C, 75 MHz clock rate; 3.3-volt Memory Subsystem ROM: RAM: 2 MB FLA ...

  • Texas Instruments 5000 - page 59

    T able 1-2 T ravelMate 5000 Series Notebook Specifications (continued) External Inter faces Characteristics Specification Serial Port Connector Type: T ransmission Type: Bits per second: Line control: Data W ord 9-pin, male, D-type connector Asynchronous transmission 110, 200, 300, 600, 1200, 2400, 4800, 9600, 19200 READY/BUSY , DC1/DC3 7 or 8 bit ...

  • Texas Instruments 5000 - page 60

    T able 1-2 T ravelMate 5000 Series Notebook Specifications (continued) Physical Characteristics Width:, Depth: Height: W eight: 11 inches (27.9 cm) 8.5 inches (21.6 cm) 2.2 inches (5.6 cm) 6.7 pounds (2.9 kg) with two Lithium-Ion Battery Packs Environmental Characteristics Operational Temperature: Altitude: Vibration: Shock: Humidity: Non-Operating ...

  • Texas Instruments 5000 - page 61

    2 Installation 2.1 Introduction This section contains unpacking and preparation for use instructions for the TM5000 Series Notebook Computers. This includes: • Removing the computer and all manuals, options and accessories from the shipping container(s) (Paragraph 2.2) • Installing Internal Notebook Options (Par agraph 2.3) • Installing Exter ...

  • Texas Instruments 5000 - page 62

    Software License agreement Battery Pack Filler End Caps TM5000 Notebook Computer TM5000 Handle Overpack Box TM5000 Pack Box Figure 2-1 TM5000 Series Notebook Packaging Diagram 2-2 Installation ...

  • Texas Instruments 5000 - page 63

    2.3 Installing Inter nal Notebook Options If you have no inter nal options to install at this time, skip to Paragraph 2.4. Otherwise, continue with Paragraph 2.3.1. 2.3.1 Installing RAM Expansion (Optional) n Note: If not installing RAM Expansion option at this time, skip to the next paragraph. Three versions of the RAM Expansion Module option are ...

  • Texas Instruments 5000 - page 64

    The installation process consists of the following steps: c Caution: The RAM module option contains components that are sensi- tive to static electricity . When handling the module and the internal parts of the computer , protect against static electricity by using wrist or ankle grounding straps and grounded working mats. When moving or storing it ...

  • Texas Instruments 5000 - page 65

    Remo ve Front Beze l Bel ow Fl oppy Dri ve (Rem ov e two Sc rews fr om Bot tom) STEP 1: STEP 2: If installing Shuttle RAM, Insert Shuttle RAM Module onto RAM Expansion Modu l e. Insert RAM Expan sion Module into Main Board and replace the Fr ont B ezel (See Abov e). 8MB or 16MB RA M E xpansion Opt ion 8MB Shutt le RAM Expansion Opt i on Installs on ...

  • Texas Instruments 5000 - page 66

    2.3.2 Installing PCMCIA Options The Notebook has two connector slots for PCMC IA option cards. These two slots can be used to install one type III or two type I/II credit card size PCMCIA option cards. Install the PCMCIA op tions as follows: 1. Review the installation instructions supplied with the PCMCIA option card(s). 2. Hold the card at the end ...

  • Texas Instruments 5000 - page 67

    2.4 Installing Exter nal Notebook Options 2.4.1 Installing the Optional Numeric Keypad An optional numeric keyboard can be attached to the notebook via the keyboard connector as shown in Figure 2-5. n Note: To install option, power of f the notebook. Then power the unit back on after the installation is completed External Numeric Keypad Option Figu ...

  • Texas Instruments 5000 - page 68

    2.4.2 Installing Exter nal Mic and Headphone Kit Option Figure 2-6 shows the recommended installation of the Exter nal Microphone and Headset Kit onto the notebook. n Note: Before installing external microphone and headphones, tur n of f power to the notebook. External Mi c ropho ne (disables internal Mic) External Headset (disable s intern al spea ...

  • Texas Instruments 5000 - page 69

    2.4.3 Installing the EZ-Dock /EZ-Dock Plus Port Replicator (Option) n Note: Skip this paragraph if not installing a p ort replicator option at this time. The optional Port Replicator is installed as fo llows: 1. Remove the port replicator and any accessories from its shipping carton . 2. Disconnect the AC Adapter from the notebook (if attached). 3. ...

  • Texas Instruments 5000 - page 70

    Adapte r Connecti ons for a Docked Notebook Figure 2-8 Installing the EZ-Dock Port Replicator/Plus Figure 2-8 Installing the EZ-Dock/EZ-Dock Plus Port Replicator 2-10 Installation ...

  • Texas Instruments 5000 - page 71

    2.5 Removing/Installing Battery Packs As shown in Figure 2-9, the TM5000 Notebook has provisions for two Lithium-Ion battery packs. Battery Pack Removal 1. If one of the two batteries contains a partial charge (at least one LED lit on the front of the battery), the remaining battery pack can be removed with the Notebook in Suspend. Otherwise, power ...

  • Texas Instruments 5000 - page 72

    2.6 Installing Desktop Devices When using a port replicator or docking system, all external devices connect to the docking system as shown in Figure 1-8. Otherwise, all exter nal devices connect to the Notebook via the connectors on the rear and sides of the notebook as shown Figure 2-10. Device installation procedures and connector pin outs are de ...

  • Texas Instruments 5000 - page 73

    2.6.1 Installing an External Keyboard/Mouse/Keypad A PS/2 compatible Keyboard, mouse or an optional PS/2 Compatible numeric keypad may be installed on the Notebook via the mouse connector on the left side of the Notebook. The connector pinouts are shown in Figure 2-11. Figure 2-11 External Mouse/Numeric Keypad Port Figure 2-11 Exter nal Keyboard/Mo ...

  • Texas Instruments 5000 - page 74

    2.6.2 Installing Exter nal Parallel Printer The Notebook is equipped with an external, bi-directional, ECC/EPP compatible, 25-pin parallel printer port. The connector pinouts and connector location are shown in Figure 2-12. Figure 2-12 Parallel Printer Connector Pinouts 2-14 Installation ...

  • Texas Instruments 5000 - page 75

    2.6.3 Installing Exter nal Serial Port Device The notebook contains an external RS-232 serial port with a male DB-9 connector as shown in Figure 2-13. The serial ports are used to interconnect such devices as: • External Modem • Serial Printer • Any device that uses an RS-232 interface c Caution: Never connect a parallel device to a serial po ...

  • Texas Instruments 5000 - page 76

    2.6.4 Installing Exter nal VGA Monitor The notebook is capable of driving both its internal LCD display and an exter nal VGA monitor (LCD only, simultaneous, or C R T only). The exter nal monitor connector pinouts and connector locations are shown in Figure 2-14. To install an exter nal monitor: 1. Tur n off power to both the notebook and monitor . ...

  • Texas Instruments 5000 - page 77

    2.6.5 Installing Exter nal Headphone/Microphones The notebook connectors used for installing a set of external headphones (or speakers) and an exter nal microphone are shown in Figure 2-15. n Note: When external devices are connected to the Audio Out and Micro- phone In connectors, the inter nal speaker and microphone are disab led. The notebook al ...

  • Texas Instruments 5000 - page 78

    2.6.6 Installing Devices With IR Inter face Any device with an Infrared inter face conforming to IRDA specifications may be placed adjacent to the IR connector on the notebook (two IR interfaces must face each other) as shown in Figure 2-16. No te: Any devi ce equi ppe d with Inf ra-Red in terface conform ing to IRD A Specific ations may b e pla c ...

  • Texas Instruments 5000 - page 79

    2.7 Installing the AC Power Adapter Use the following procedures to connect the AC Adapter to the system: c Caution: Use only the AC Adapter supplied with the computer; other adapters can damage the unit. 1. Remove the AC adapter from the packaging. Connect the round coaxial connector supplied with the notebook to the D C IN power receptacle on the ...

  • Texas Instruments 5000 - page 80

    2.8 Initial System Checkout After you’ve installed all inter nal options and external cabling, you’re ready for system checkout and software configuration. To check out the system, set the power switch on the notebook to the On ( I ) position which initiates the notebook self test. During self test execution, the computer checks the operation o ...

  • Texas Instruments 5000 - page 81

    2.10 Making Backups of System Software The Notebook is preloaded with the DOS/W indows operating system software, Jazz 16 Sound Utilities, PCMCIA drivers, BatteryPro Software, and other configuration software. Supplied with your system is a diskette containing backup and restore utilities, tools and diagnostics. Prior to extended use of the noteboo ...

  • Texas Instruments 5000 - page 82

    3 Operating Instructions 3.1 Introduction The first two subsections describe the TM5000 Notebook operating controls and indicators. The remainder of this section contains a summary of computer operations related to notebook maintenance including how to restore system softwar e. n Note: For additio nal operating instructions, see T ravelMate 5000 Se ...

  • Texas Instruments 5000 - page 83

    3.2.1 Notebook Switches and Controls The Notebook switches and controls are shown in Figure 3-1 and described in the following paragraphs. All controls (except the Connector Door Release switch on the rear of the unit) and many of the LED displays are accessible only when the notebook is in the open position. 3.2.1.1 LCD Controls The TFT version of ...

  • Texas Instruments 5000 - page 84

    3.2.1.2 Power/Suspend Switches The notebook contains two power/mode switches including: • Power On/Off Switch- Horizontal slide type switch that controls po wer to the unit (left most position is Off). When initially set to the On ( I ) position, power is applied to the Notebook Computer, the PWR LED glows green and the computer executes power up ...

  • Texas Instruments 5000 - page 85

    3.2.2.2 Rear Connector Door Release Button The Rear Connector Door Release Button, located in the center of the rear panel of the notebook as shown in Figure 3-1, is used to open the two rear panel connector doors when attaching external devices or installing the notebook onto a "Docking System" option. 3.2.3 Notebook LED Displays The not ...

  • Texas Instruments 5000 - page 86

    • NUM (Num Lock) Indicator- This LED lights when you press the Fn-F7 (NumLk) keys to toggle on the numeric keypad lock function. When the LED is On, the embedded numeric keyboard keys generate AT-keypad characters and functions when pressed in conjunction with the Fn key. When the NUM indicator is Off, pressing the Fn key with the appropriate key ...

  • Texas Instruments 5000 - page 87

    The Low Battery indicator glows red (and the alar m sounds if enabled using the Setup Program) when the battery charge is low to war n of an impending low battery condition (approx. 1 to 10 minutes of charge remaining in battery). Both the alar m and indicator remain on until the computer shuts itself down. c Caution: Upd ate all work as soo n as p ...

  • Texas Instruments 5000 - page 88

    3.3 Inter nal Speaker/Microphone The notebook is equipped with an internal speaker and condenser -type microphone in the locations shown in Figure 3-4. The internal microphone and speakers are disabled when using an exter nal microphone and external headset or speakers. 3.4 Operating Procedur es Some of the common operating features for the Noteboo ...

  • Texas Instruments 5000 - page 89

    3.4.2 Using Sound Utilities Several sound utilities are factory installed on the hard drive including: • Pocket Recorder- Windows application for recording waveform data in 8- or 16-bit format. Started by clicking on Pocket Recorder icon in the JAZZ group • Object Linking and Embedding (OLE)- a Window’s based utility that allows applications ...

  • Texas Instruments 5000 - page 90

    • Press SUSPEND to spin down the Hard Disk Drive • Save RAM Disk to Disk (if using RAM Disk) • If using Windows, double-click on the Shutdown icon to exit all active applications as well as Windows • Press Suspend switch to put the computer in Suspend mode whenever you are not actively using the computer • Power down the system if you do ...

  • Texas Instruments 5000 - page 91

    3.4.7 Recharging the Battery Packs A standalone battery charger option is available to charge notebook battery packs. The battery packs may also be charged in the notebook as follows: 1. Install the battery pack in your computer (if not already installed). 2. Connect the AC Adapter as described in Section 2. The LEDs on the battery pack(s) will gra ...

  • Texas Instruments 5000 - page 92

    3.4.11 Rebuilding the System Software In the event of a hard drive replacement or system board replacement which resulted in loss of system software, you may need to rebuilt the entire system software structure. The following items are required to rebuild the system software: • Set of 22 backup diskettes of the system software (international vers ...

  • Texas Instruments 5000 - page 93

    4 T roubleshooting Procedur es This section provides an overview of the fault isolation process, provides guidelines for isolating computer malfunctions to replaceable subassemblies and provides instructions for executing diagnostics and interpreting error messages. 4.1 Overview of Fault Isolation Process The fault isolation process (summarized in ...

  • Texas Instruments 5000 - page 94

    The detailed block diagram, shown in Figure 4-2, is useful in per forming fault analysis of various inter nal subsystems. For example, a sound hardware problem can be traced to either the PCMCIA/Sound Board, the main board, or the interconnecting cabling software. A front panel LED problem can be the LED Board, Main Board or interconnecting cabling ...

  • Texas Instruments 5000 - page 95

    Figure 4-2 Notebook Detailed Block Diagram Troubleshooting Procedures 4-3 ...

  • Texas Instruments 5000 - page 96

    4.2 T roubleshooting Procedur es The built-in self test program and the disk resident diagnostics program (PC-Doctor) are useful tools in computer troubleshooting. However , if the computer has a power , keyboard or display problem, you first solve this problem before running diagnostics. If the computer powers up and displays messages on the LCD o ...

  • Texas Instruments 5000 - page 97

    • Notebook Set for External Monitor- use VGA or WinMo de Utility command to reset notebook. • LCD - Replace the cover-display assembly as described in Section 5 of this manual. • Low battery - Use a fully charged battery. 4.2.3 Fault Isolation Using Selftest When the computer is first powered up, it automatically per forms a self-test of its ...

  • Texas Instruments 5000 - page 98

    T able 4-1 Self-Test Error Messages Diskette drive 0 failure This message indicates the inter nal floppy diskette (drive A) has failed. Press CTRL-ALT-ESC to ensure that drive type is correctly set (3.5 inch, 1.44MB). Run the Diagnostics to check drive A as described in Paragraph 4.2.5. Also try using a new, correctly for matted diskette. Diskette ...

  • Texas Instruments 5000 - page 99

    If the self-test still fails, execute the diagnostics as described in paragraph 4.2.5. No boot device available - press F1 to retry boot This message indicates the system disk, the diskette drive, or the diskette is defective (if loading MS-DOS from diskette) or that the NVRAM is not correctly configured for the installed disk drive type. Replace t ...

  • Texas Instruments 5000 - page 100

    4.2.3.2 Self T est Beep Error Messages In the event of a hardware problem that affects the display, the Notebook also communicates errors via a series of beeps. These codes may be heard over the system’s speaker as three bursts of beeps. The interpretation of the beep codes is provided in Table 4-2. To recover from a self test err or , try cyclin ...

  • Texas Instruments 5000 - page 101

    T able 4-2 Self-Test Beep Codes (continued) Beep Code Port 80h Description 2-3-3 1Ah Bit A, 1ST 64K RAM Failure 2-3-4 1Bh Bit B, 1ST 64K RAM Failure 2-4-1 1Ch Bit C, 1ST 64K RAM Failure 2-4-2 1Dh Bit D, 1ST 64K RAM Failure 2-4-3 1Eh Bit E, 1ST 64K RAM Fail ure 2-4-4 1Fh Bit F , 1ST 64K RAM Failure 3-1-1 20h Slave DMA Register Failure 3-1-2 21h Mast ...

  • Texas Instruments 5000 - page 102

    4.2.4 PCMCIA Modem Problems If an optional PCMCIA modem does not work properly, check the following items: • Proper installation of any PCMCIA options (r un Phoenix PCMCIA PhoenixCARD Manager install program). • Dialing problem or wrong number - Try dialing a number that you have previously dialed successfully. • Faulty phone line - Connect a ...

  • Texas Instruments 5000 - page 103

    Functionally, PC-Doctor includes the following: • Group of nine non-Interactive diagnostic tests that perform a non-destructive test of the major hardware functions in the notebook (Processor, Memory, System board, video section, serial and parallel ports (when loopback adapters are installed), hard disk and floppy disk. • Group of seven Intera ...

  • Texas Instruments 5000 - page 104

    Interactive T ests The PC-Doctor diagnostic test includes a suite of seven Interactive tests that require operator input during the course of the test. The Interactive T ests category includes: • Keyboard - tests the keyboard keys, LEDs and repeat function • Vid eo -tests the LCD and external VGA charac ter sets, and colors. • Speaker -tests ...

  • Texas Instruments 5000 - page 105

    4.2.5.1 User Interface to PC-Doctor PC-Doctor is structured as a text-mode, windowed user interface with pull-down menus. Program operation requires the use of the following keys: • Cursor Keys- move the highlighted pointer • ENTER Key- Selects the highlighted option • ESC Key- Cancels current function and goes back one step • F1 Key- Activ ...

  • Texas Instruments 5000 - page 106

    4.2.5.3 Running PC-Doctor PC-Doctor is a DOS-resident program that can be run from either hard disk or from the bootable diskette you previously created. 1 .F r o m t h e C: prompt, type: PCDR and press En ter 2 . The Diagnostics Program loads into system memory, and the LCD displays the diagnostics Header . n Note : There are a number of command- ...

  • Texas Instruments 5000 - page 107

    5 Field Service 5.1 Introduction This section contains preventive and corrective maintenance procedures for the T ravelMate 5000 Series Notebook Computers. The first part of the section describes the computer cleaning procedures and preferred handling procedures for sensitive components (e.g. disk drives, batteries). The second part of the section ...

  • Texas Instruments 5000 - page 108

    5.2.3 Handling the Computer Battery Packs The battery packs fur nished with the computer require reasonable care and handling to ensure efficient operation and maximum life. Periodically inspect the battery ter minals and the batteries for evidence of corrosion and oxide build-up; clean if necessary. To ensure that the battery packs endure normal l ...

  • Texas Instruments 5000 - page 109

    c Caution: All boards, options and peripherals contain components that are sensitive to stati c electricity . When handling any of these items, pro- tect against static electricity by using wrist or ankle grounding straps and grounded working mats. When moving or storing items, use the anti-static bags supplied with the items. 5.4 Notebook Field-Re ...

  • Texas Instruments 5000 - page 110

    5.4.1 Cover-Display Assembly As shown in Figure 5-2, the Cover -Display Assembly contains the LCD screen, Power Inverter Board, Display Adapter Board, Microphone, and four cable assemblies (Inverter Cable Assembly, TFT Display cable assembly, and two DAB to Base Cable Assemblies (Left). The field replaceable components within the Cover Display Asse ...

  • Texas Instruments 5000 - page 111

    Table 5-1 Co ver Display Assembly, Field Replaceable Units (FRUs) FRU Description TI Part No. Removal/Replacement Paragraph No. TM5557, Pentium-Based Color LCD, 810 Drive, P/N 9798843 10.4 inch LCD 9786279-0001 5.5.14, 5.5.15 Cover Display Assembly with LCD Panel,Inverter Board, Display Adapter Board , Microphone Assembly, and cables 9786250-8003 5 ...

  • Texas Instruments 5000 - page 112

    5.4.2 System Base Assembly As shown in Figure 5-3, the System Base Assembly houses a variety of field-replaceable subassemblies an d components. The various assemblies, associated TI part numbers and paragraphs numbers containing removal/replacement procedures are listed in Table 5-2. T able 5-3 contains a listing of Customer (non-technical user) r ...

  • Texas Instruments 5000 - page 113

    T a ble 5-2 Base Assembly, Field Replaceable Units (FRUs) FRU Description TI Part No. Removal/Replacement Paragraph No. TM5557, Pentium-Based Color LCD, 810 Drive, P/N 9798843 Keyboard Assembly 9791004-00XX 5.5.3 Hard Disk Drive, 810 9786285-8001 5.5.4 Expansion RAM See Section 2 5.5.5 (Three options) Base Top Cover Assembly 9786227-8001 5.5.6 PWB ...

  • Texas Instruments 5000 - page 114

    T able 5-3 Notebook CRUs (Customer Replaceable Units) CRU Description TI Part No. Removal/Replacement Paragraph No. All TM5000 Models Battery Pack Kit, LI-ON 9786217-0001 5.5.1 PCMCIA Options (See Section 1) 5.5.2 AC Power Adapter 9786094-0001 Section 2 8 MB RAM Expansion Kit 9798816-0001 5.5.5 16MB RAM Expansion Kit 9798816-0002 5.5.5 8 MB Add On( ...

  • Texas Instruments 5000 - page 115

    5.5 Notebook Sub-Assembly Removal and Replacement Procedures The following paragraphs contain field service-level removal/replacement procedures for the Notebook. 5.5.1 Removing/Replacing the Notebook Battery Pack The procedure for removing and replacing the battery pack(s) is as follows: 1. Tur n off the computer . 2. Press the associated Battery ...

  • Texas Instruments 5000 - page 116

    5.5.2 Removing/Replacing PCMCIA Options The procedure for removing and replacing the PCMCIA options is as follows: 1. Tur n off the computer . 2. Press the associated PCM CIA Eject button (left button ejects the top PCMCIA device, right button ejects the bottom device (see Figure 5-5). 3. Remove the PCMCIA device(s). 4. To replace the PCMCIA Device ...

  • Texas Instruments 5000 - page 117

    4. Repeat this procedure until the top edge of the keyboard is free. 5. T ilt the top edge of the keyboard toward you to gain access to the two keyboard cable connectors underneath the keyboard. 6. Note that the wide keyboard connector attaches to the Main Board using a ZIF (zero insertion force ) type connector . T o disconnect this cable, gently ...

  • Texas Instruments 5000 - page 118

    5.5.4 Removing/Replacing the Hard Drive Assembly The procedure for removing and replacing the Hard Drive assembly is as follows: 1. Power down the notebook, remove the battery packs, and disconnect the AC Adapter , if installed. 2. Disconnect any peripheral device inter face cables from the external inter face connectors and remove any installed PC ...

  • Texas Instruments 5000 - page 119

    5.5.5 Removing/Replacing Expansion RAM Boards To remove and replace the expansion RAM board(s),per for m the following procedure: 1. Power down the notebook, remove the battery packs, and disc onnect the AC Adapter , if installed. 2. Disconnect any peripheral device interface cables from the exter nal inter face connectors and remove any installed ...

  • Texas Instruments 5000 - page 120

    5.5.6 Opening/Replacing the Base Cover Assembly The Top Cover Assembly protects all inter nal components housed in the base assembly (Boards, Floppy Drive, Speaker , etc. To open up the Base Assembly for maintenance operations, per form the following procedure: n Note: Removing the Top Cover Assembly will cause the PCMCIA Button (P/N 9786086-1) and ...

  • Texas Instruments 5000 - page 121

    Tamper Evident Label; Remove lab el t o access screw (La bel must be re place d after servicing unit) Remove four recess ed Tor x Scre ws fro m Botto m of U nit Figure 5-9 Opening the Base Cover Field Service 5-15 ...

  • Texas Instruments 5000 - page 122

    5.5.7 Removing/Replacing the Keyscan Board To remove and replace the Keyscan Board, perfor m the following procedure: 1. Open up the base assembly as described in the previous paragraph. 2. Gently lift the floppy drive cable up and backwards to gain access to the Keyscan Board. 3. Using a straight slot screwdriver , gently pry the Keyscan Board upw ...

  • Texas Instruments 5000 - page 123

    5.5.8 Removing/Replacing the IR Board To remove and replace the IR Board, per form the following procedure: 1. Open up the base assembly as described in the previous paragraph (Paragraph 5.5.6). 2. Remove the IR lens by bowing gently to the middle and removing lens. 3. Using a straight slot screwdriver , gently pry the IR Board from its connector . ...

  • Texas Instruments 5000 - page 124

    5.5.9 Removing/Replacing the Floppy Drive To remove and replace the Floppy Drive, reference Figure 5-12 and per for m the following procedure: 1. Open up the base assembly as described in the previous paragraph (Paragraph 5.5.6). 2. Remove the Keyscan Board as described in Paragraph 5.5.7. 3. Unlock the Zero Insertion Force connector holding the fl ...

  • Texas Instruments 5000 - page 125

    5.5.10 Removing/Replacing the LED Board To remove and replace the LED Board Assembly, reference Figure 5-13 and per form the following procedure: 1. Open up the base assembly as described in the previous paragraph (Paragraph 5.5.6). 2. Unplug the cable connector from J11 on the Sound/PCMCIA B oard. 3. Remove the screw securing the LED Board to the ...

  • Texas Instruments 5000 - page 126

    5.5.11 Removing/Replacing the Sleep Switch Board To remove and replace the Sleep Switch Board Assembly, reference Figure 5-14 and per form the following procedure: 1. Open up the base assembly as described in the previous paragraph (Paragraph 5.5.6). 2. Unplug the cable connector from J11 on the Sound/PCMCIA B oard. 3. Remove the screw securing the ...

  • Texas Instruments 5000 - page 127

    5.5.12 Removing/Replacing the Sound/PCMCIA Board To remove and replace the Sound/PCMCIA Board, reference Figure 5-15 and per form the following procedure: 1. Open up the base assembly as described in the previous paragraph (Paragraph 5.5.6). Remove any installed PCMCIA optio ns (Paragraph 5.5.2). 2. Unplug the cable connectors from J5, J10, J11, J1 ...

  • Texas Instruments 5000 - page 128

    5.5.13 Removing/Replacing the Main Board To remove and replace the Main Board Assembly, reference Figure 5-16 and per form the following procedure: 1. Open up the base assembly as described in the previous paragraph (Paragraph 5.5.6). 2. Remove the Keyscan Board, the IR Board, the Floppy Drive, the Sound/PCMCIA Boards as described in previous parag ...

  • Texas Instruments 5000 - page 129

    1 Ground ing st rap goes u nder right most scr ew holdi ng DAB Board to Cov er Assembly. Shown wi th Di spl ay Bez el Remo ved Remov e LCD Be zel; di sc onnect groundi ng str ap from Main B oar d to DA B B oard. Remove PCMC IA/Sound B oard , Key sc an Boa rd , IR Board an d Floppy Dri v e 2 Remov e scr ews and c able connec tions fro m Mai n B oard ...

  • Texas Instruments 5000 - page 130

    5.5.14 Removing/Replacing the Display Bezel To remove the Display Bezel (to gain access to Cover -Display FRU’s), refer to Figure 5-17 and per form the following procedure: 1. Turn of f the computer and disconnect the ac power adapter (if it is attached). 2. Disconnect any peripheral device inter face cables from the external inter face connector ...

  • Texas Instruments 5000 - page 131

    5.5.15 Removing and Replacing the DAB Board To remove the DAB Board, refer to Figure 5-18 and per form the foll owing procedure: 1. Tur n off the computer , remove the battery packs and disconnect the ac power adapter (if it is attached). 2. Remove the Display Bezel as described in paragraph 5.5.14. c Caution: If the notebook is powered up with the ...

  • Texas Instruments 5000 - page 132

    5.5.16 Removing and Replacing the LCD Cover Assembly To remove the LCD Cover Assembly with LCD Panel, Microphone, DAB, Inverter Board, Cover Plastics and V ideo Driver Board components , refer to Figure 5-19 and use the following procedure: 1. Tur n off the computer , remove the battery packs and disconnect the ac power adapter (if it is attached). ...

  • Texas Instruments 5000 - page 133

    5. Install the replacement LCD Cover Assembly onto the base of the notebook and secure using the hinge screws. Reconnect the two video cables under the DAB Board and secure the DAB insulator to the top of the board. 6. Install the original LCD bezel .When replacing the bezel, ensure that the microphone is correctly positioned between the plastic ta ...

  • Texas Instruments 5000 - page 134

    5.6 Removing/Replacing the Inverter Board To remove/replace the Inverter Board (Figure 5-20), use the following the procedure; 1. Remove the Display Bezel as described in Paragraph 5.5.14. c Caution: Ensure that the AC Adapter is disconnected from the note- book and both batteries removed. Otherwise, you could be exposed to high voltages. 2. Remove ...

  • Texas Instruments 5000 - page 135

    Sc rews Hol din g I nv ert er Boar d to C over R emoving/Repl acing Inverte r Bo ard Step 1: Re move two Snap On Plastic Hinge Covers Step 2: Remove two plugs a nd remove r ecessed screws. . Step 3: Gently pry of f the Di spla y B ezel (he ld b y cl ips) Removing/Re placing Bezel Figure 5-20 Removing/Replacing the Inverter Board Field Service 5-29 ...

  • Texas Instruments 5000 - page 136

    6 Illustrated Parts Listing 6.1 Introduction This section contains an illustrated parts listing for the TM5000 Pentium, 75MHz, 10.4 inch Active Matrix Color , 8MB Memory, 810 Drive, TI P/N 9798842. The first part of the section provides a top-down illustrated parts listing starting with the overall pack assembly, unit assembly and notebook accessor ...

  • Texas Instruments 5000 - page 137

    6.2 TM5000 Pentium, 10.4 TFT 810HD, Domestic Notebook with Pack, P/N 9798842-0001 Figure 6-1 and Table 6-2 contain an illustration and parts listing for the TM5000 Pentium 10.4 inch TFT , 810 Drive, TI Part No. 9798842-0001 (Domestic version only shown for clarity). Figure 6-1 Figure 6-1 TM5000 Pentium, 10.4 TFT, 810HD, Domestic Notebook with Pack, ...

  • Texas Instruments 5000 - page 138

    Table 6-2 TM5000 Pentium, 10.4 TFT , 810HD, Domestic Notebook with Pack, P/N 9798842-0001 P AR T NO: 9798842-0001TM MDL 5557, 810HD, 10.4TFT , W/P ACK, DOM REV : B/B Item TI Part No. Quantity Description 01 9798842-0100 1 COMMON PAR TS FOR 9798842-XXXX 02 9798843-0001 1 UNIT ASSY ,MDL 5557,810HD,10.4TFT,DOM 03 9786168-0001 1 ACCESSORY KIT,TM5000,EN ...

  • Texas Instruments 5000 - page 139

    6.2.1 TM5000, 10.4 TFT Color , 810HD, Domestic Unit Assembly, P/N 9798843, Parts Listing A breakout of the parts listing for the unit level assembly for the TM5000 Pentium, 10.4 inch TFT , 810 Drive is shown in Figure 6-2. The associated parts listing is provided in Table 6-3. Figure 6-2 Notebook Major Assemblies Figure 6-2 TM5000, 10.4 TFT Color, ...

  • Texas Instruments 5000 - page 140

    Figure 6-2 Figure 6-2 TM5000, 10.4 TFT Color, 810HD, Domestic Unit Assembly, P/N 9798843 (Sheet 2 of 2) Illustrated Parts Listing 6-5 ...

  • Texas Instruments 5000 - page 141

    T able 6-3 TM5000, 10.4 TFT Color , 810HD, Domestic Unit Assembly, P/N 9798843, Parts Listing P AR T NO: 9798843-0001 UNIT ASSY , MDL 5557, 81 0HD, 10.4 TFT , DOM REV : J/ M Item TI Part No. Quantity Description 01 9798843-0100 1 COMMON PAR TS FOR 9798843-XXXX 02 9786285-0101 1 HDD,2.5 IN,810HD,DOS 6.22 PRELOAD 03 9791004-0001 1 KEYBOARD,BROTHER,W/ ...

  • Texas Instruments 5000 - page 142

    T able 6-3 TM5000, 10.4 TFT Color , 810HD, Domestic Unit Assembly, P/N 9798843, Parts Listing (continued) Item TI Part No. Quantity Description 103 9786147-0001 1 BUTTON,LCD,CONTRAST,BRIGHTNESS,TM5000 104 9786123-0001 1 HEATSINK,CPU,TM5000 105 9786259-0001 1 HEATSINK CUSHION,TM5000 SERIES 106 9786128-0001 1 PWB ASSY,LED BOARD,LILY 107 9786148-0001 ...

  • Texas Instruments 5000 - page 143

    T able 6-3 TM5000, 10.4 TFT Color , 810HD, Domestic Unit Assembly, P/N 9798843, Parts Listing (continued) Item TI Part No. Quantity Description 141 2248407-1307 2 SCREW,SLOT -TORX,PLASTITE,PAN,2-28 X .188 142 2248407-0073 3 SCREW,TORX,MACHINE,2-56 X .250 143 2248840-0002 2 SCREW,PLASTITE,P AN HEAD,PH,2-28 X .375 *ALT PN 2248407-0311(SEC) *LM ITEM 1 ...

  • Texas Instruments 5000 - page 144

    6.2.2 10.4 Inch TFT Cover Display Assembly The 10.4 Inch Color TFT Cover Display Assembly, TI Part No. 9786250-0003/8003, is shown in Figure 6-3. The associated parts listing is provided in Table 6-4. Figure 6-3 Figure 6-3 10.4 TFT Color TFT, Cover Display Assembly, P/N 9786250-0003 Illustrated Parts Listing 6-9 ...

  • Texas Instruments 5000 - page 145

    Table 6-4 10.4 Inch Co lor TFT Cover Display Assembly, P/N 9786250-0003, Parts Listing PAR T N O: 9786250-0003 LCD ASSY ,10.4" TFT SHARP ,TM5000 S ERIES REV: M/ R Item TI Part No. Quantity Description 52 9786263-0001 1 LCD COVER,10X,TM5000 SERIES 98 9786117-0001 1 BAFFLE,LCD,MICROPHONE,TM5000 99 9786264-0001 1 BRKT,LCD MOUNT ,UPPER LEFT,SHARP1 ...

  • Texas Instruments 5000 - page 146

    6.3 Assessory Kit Parts Listing for TM5000 Series Notebooks. A breakout of the parts associated with the Assessory Kit for the TM5000 Series Notebooks is provided in Table 6-5. This parts list is applicable to all TM5000 Series Notebooks. T able 6-5 Assessory Kit (P/N 9786168-XXXX) for the TM5000 Series Notebooks P AR T NO: 9786168-0001 ACCESSORY K ...

  • Texas Instruments 5000 - page 147

    6.4 Board Level Illustrated Parts Listings The remainder of this section contains board-level illustrated parts listings that are common to various product models (see unit level breakout for a particular model; reference the inter nal PWB part numbers and refer to paragraph 6.4 to locate the correct drawing and parts listing for a specific TM5000 ...

  • Texas Instruments 5000 - page 148

    Figure 6-4 Main Board (P54, 75MHz), P/N 9798803-0001 Figure 6-4 Main Board (P54, 75MHz) P/N 9798803-0001 (Sheet 1 of 2) Illustrated Parts Listing 6-13 ...

  • Texas Instruments 5000 - page 149

    Figure 6-4 Main Board (P54, 75MHz) P/N 9798803-0001 (Sheet 2 of 2) 6-14 Illustrated Parts Listing ...

  • Texas Instruments 5000 - page 150

    T a ble 6-6 Main Boar d (P54, 75MHz), P/N 9798803-0001, Parts Listing P AR T NO: 9798803-0001PWB AS SY ,MAIN BOAR D, TM5000P REV : R/AA Item TI Part No. Quantity Description 02 9798805-0001 REF LOGIC,MAIN BOARD,TM4100P 28 2248849-0001 1 CONNECTOR, RCPT ,160-POS,2-ROW,R T ANGLE P9 29 2248877-0001 1 CONN ,RCPT ,D-SUB,15-POS,3-ROW,SLIM-W/FERR P90 30 2 ...

  • Texas Instruments 5000 - page 151

    T a ble 6-6 Main Board, P/N 9798803-0001, Parts Listing (continued) Item TI Part No. Quantity Description 141 9786236-0001 1 INDUCTOR,13UH,5 AMP ,TM5000 SERIES L201 142 2248749-0010 1 CAP ,AL ELECT,ORG,100UF ,10%,20V,RAD LEADS C201 143 2248730-0018 1 CAP ,AL ELECT,68UF ,20%,25V,RADIAL C206 165 2248730-0012 1 CAP ,AL ELECT,100UF ,20%,16V,RADIAL C190 ...

  • Texas Instruments 5000 - page 152

    T a ble 6-6 Main Board, P/N 9798803-0001, Parts Listing (continued) Item TI Part No. Quantity Description Note: The following is a breakout of the tab parts associated with item 191. PAR T N O: 9798803-6001 TAB PAR TS FOR 9798803-0001 REV: R/AA Item TI Part No. Quantity Description 04 9798803-3301 1 BACKSIDE PAR TS FOR 9798803-0001 59 2563194-0001 ...

  • Texas Instruments 5000 - page 153

    T a ble 6-6 Main Board, P/N 9798803-0001, Parts Listing (continued) Item TI Part No. Quantity Description 66 2563196-0003 4 IC,74LVT16245,16-B BUS XCVR,S-R,PL TSSOP U61 U62 U63 U64 67 2563197-0003 2 IC,74LVC08,QUAD 2-INP AND GATE,PL TSSOP U504 U505 68 2563201-0003 1 IC,74LVT244,OCTAL BUFFER/DRIVER,PL TSSOP U125 70 2248939-0028 6 RES,NET,QSOP ,16-PI ...

  • Texas Instruments 5000 - page 154

    T a ble 6-6 Main Board, P/N 9798803-0001, Parts Listing (continued) Item TI Part No. Quantity Description Note: The following is a breakout of the topside parts associ ated with item 003 above. P ART NO: 9798803-3001 TOPSIDE P ARTS FOR 9798803-0001 REV : R/AA Item TI Part No. Quantity Description 01 9798804-0001 1 PWB,LIL Y MAIN (TM5000P) 27 224887 ...

  • Texas Instruments 5000 - page 155

    T a ble 6-6 Main Board, P/N 9798803-0001, Parts Listing (continued) Item TI Part No. Quantity Description 63 2248889-0015 1 CR YSTAL,MINIATURE,24.000 MHZ,CERAMIC,SMT Y15 64 2248657-0002 1 XTAL,QUAR TZ,32.768 KHZ,SMT,8X 3.8 X 2.5 Y110 65 2563202-0002 2 IC,74LVT573,OCT TRANS D TYPE LCH,P TSSOP U501 U503 69 2563220-0003 1 IC,74ABT273,OCTAL FLIP-FLOP , ...

  • Texas Instruments 5000 - page 156

    T a ble 6-6 Main Board, P/N 9798803-0001, Parts Listing (continued) Item TI Part No. Quantity Description 83 2248731-0001 1 CAP ,TANT CHIP ,4.7 UF ,20%,10V ,1206 PKG C1810 84 2248872-0013 2 CAP ,CER CHIP ,10 PF ,10%,100V,COG,0603 PKG C1212 C1213 86 2248872-0016 2 CAP ,CER CHIP ,18 PF ,10%,100V,COG,0603 PKG C154 C155 87 2248950-0001 53 CAP ,CER CHIP ...

  • Texas Instruments 5000 - page 157

    T a ble 6-6 Main Board, P/N 9798803-0001, Parts Listing (continued) Item TI Part No. Quantity Description 92 2248863-0009 48 RES,CHIP ,22 OHM,5%,.063W,0603 PKG R500 R501 R502 R503 R504 R505 R506 R507 R508 R512 R513 R514 R515 R516 R517 R518 R519 R520 R521 R522 R523 R524 R800 R801 R802 R803 R804 R828 R829 R954 R1631 R1632 R1633 R1634 R1635 R1636 R163 ...

  • Texas Instruments 5000 - page 158

    T a ble 6-6 Main Board, P/N 9798803-0001, Parts Listing (continued) Item TI Part No. Quantity Description 106 2248654-0005 4 FERRITE CHIP ,WIDE BAND,400 OHMS @ 100MHZ FB171 FB172 FB173 FB174 107 2248463-0005 2 EMI SUPRESSOR,CHIP ,Z=80 OHMS,25% FB95 FB123 110 2248858-0065 1 CAP ,TANT C HIP ,100 U F ,20%,4V,F-CASE,L-PRO C43 112 0996709-0002 1 IC,LM39 ...

  • Texas Instruments 5000 - page 159

    T a ble 6-6 Main Board, P/N 9798803-0001, Parts Listing (continued) Item TI Part No. Quantity Description 144 2248834-0001 1 CAP ,TANT CHIP ,CNFRML,100UF,20%,15V ,H-PKG C208 145 2248252-0067 2 TANTALUM CHIP CAPACITOR,10UF+/-20% ,16VDC C2001 C195 147 2248813-0025 2 RES,CHIP ,.150 OHM,1%,1W,2512 PKG R2111 R2120 148 2248813-0001 1 RES,CHIP ,.030 OHM,1 ...

  • Texas Instruments 5000 - page 160

    T a ble 6-6 Main Board, P/N 9798803-0001, Parts Listing (continued) Item TI Part No. Quantity Description 181 2248872-0053 1 CAP ,CER CHIP ,.022 UF ,+80/-20%,25V,Z5U,06 C202 183 2248872-0045 3 CAP ,CER CHIP ,4700 PF ,10%,50V,X7R,0603 PK C197 C198 C2003 185 2248863-0121 1 RES,CHIP ,1 M OHM,5%,.063W,0603 PKG R1902 220 2563135-0032 2 IC,DRAM,256K X 16 ...

  • Texas Instruments 5000 - page 161

    Figure 6-5 Figure 6-5 PCMCIA/Sound Board, P/N 9786205-0001 (Sheet 1 of 2) 6-26 Illustrated Parts Listing ...

  • Texas Instruments 5000 - page 162

    Figure 6-6 Figure 6-5 PCMCIA/Sound Board, P/N 9786205-0001 (Sheet 2 of 2) Illustrated Parts Listing 6-27 ...

  • Texas Instruments 5000 - page 163

    Table 6-7 PCMCIA/Sound Board, P/N 9786205-0001, Parts Listing P AR T NO: 9786205-0001 PWB ASSY , PCMCIA/SOUND BOAR D, TM4100 REV : K/L Item TI Part No. Quantity Description 02 9786207-0001 REF LOGIC,PCMCIA/SOUND BOARD,TM5000 03 2363830-0008 .0030 LABEL,SYMBOLIZATION (.375" X .375") 04 2248898-0001 3 CONNECTOR,JACK,AUDIO,3.5MM,BLACK J1,J2, ...

  • Texas Instruments 5000 - page 164

    Table 6-7 PCMCIA/Sound Board, P/N 9786205-0001, Parts Listing (continued) Item TI Part No. Quantity Description 54 2563212-0001 1 IC,AD720,RGB TO NTSC ENCODER,PLCC U29 55 9798685-0003 1 CM,IC,74HC157,HI-SPEED CMOS,16-PIN,SOIC U28 56 2548254-0002 1 IC,74HCT08,QUAD 2-INPUT AND,PLASTIC SOIC U22 59 2248884-0001 1 CONV,DC/DC,MICROPWR,ADJ V ,PLASTIC SOIC ...

  • Texas Instruments 5000 - page 165

    Table 6-7 PCMCIA/Sound Board, P/N 9786205-0001, Parts Listing (continued) Item TI Part No. Quantity Description C20 C21 80 2248600-0037 2 CAP ,CER CHIP ,1000 PF ,10%,50V,COG,805 PKG C13 C37 83 2248600-0042 2 CAP ,CER CHIP ,2700PF ,10%,50V,X7R,805 PKG C31 C33 84 2248600-0017 2 CAP ,CER CHIP ,22 PF ,10%,50V,COG,805 PKG C164 C165 85 2248731-0001 1 CAP ...

  • Texas Instruments 5000 - page 166

    Table 6-7 PCMCIA/Sound Board, P/N 9786205-0001, Parts Listing (continued) Item TI Part No. Quantity Description 117 2248846-0178 3 RES,CHIP ,698 OHM,1%,.10W,0805 PKG R102 R103 R104 118 2248523-0085 3 RES,CHIP ,75.0 OHM,1%,.25W,1210 PKG R105 R106 R107 119 2248846-0385 1 RES ,CHIP ,100 K OHM,1% ,.10W ,0805 PKG R156 120 2248601-0130 6 CHIP RESISTOR,0. ...

  • Texas Instruments 5000 - page 167

    Table 6-7 PCMCIA/Sound Board, P/N 9786205-0001, Parts Listing (continued) Item TI Part No. Quantity Description 39 2563157-0001 1 IC,YMF262,FM SOUND S OURCE,PLASTIC SOIC U13 40 2563158-0001 1 IC,Y AC512,2-CH FLOATING D/A CONV,PL SOIC U14 41 2548509-0001 1 MOSFET,N-CHANNEL,60V ,SOT -23 PKG Q9 43 2568719-0001 1 IC,74HCT00,SMT,QUAD NAND GATE U8 44 224 ...

  • Texas Instruments 5000 - page 168

    Table 6-7 PCMCIA/Sound Board, P/N 9786205-0001, Parts Listing (continued) Item TI Part No. Quantity Description 62 2248808-0005 1 COIL,ELECT,22UH,.68A,4.5MM DIA,SMT PKG L8 63 2248623-0004 1 CR YSTAL OSC,14.3180 MHZ,+/-100PPM,SMT PK OSC1 64 2548278-0001 1 DIODE,SWITCHING,100V(BR),SMT CR1 65 2548478-0003 1 DIODE,SCHOTTKY,SOD-87 PKG CR9 68 2563155-000 ...

  • Texas Instruments 5000 - page 169

    Table 6-7 PCMCIA/Sound Board, P/N 9786205-0001, Parts Listing (continued) Item TI Part No. Quantity Description 79 2248600-0025 2 CAP ,CER CHIP ,100PF ,10%,50V,COG,0805 PKG C4 C7 80 2248600-0037 1 CAP ,CER CHIP ,1000 PF ,10%,50V,COG,805 PKG C38 81 2248252-0044 1 TANTALUM CHIP CAP ,1.0 UF +/-20%,10V DC C58 82 2248600-0041 3 CAP ,CER CHIP ,2200PF ,10 ...

  • Texas Instruments 5000 - page 170

    Table 6-7 PCMCIA/Sound Board, P/N 9786205-0001, Parts Listing (continued) Item TI Part No. Quantity Description 99 2248601-0080 2 CHIP RES,20 K OHM,.1 W,5%,0805 PKG R130 R131 100 2248601-0033 1 CHIP RESISTOR,220 OHM,.1W,5%,0805 PKG R115 101 2248601-0081 1 CHIP RESISTOR,22K OHM,.1W,5%,0805 PKG R46 103 2248601-0083 1 CHIP RESISTOR,27K OHM,.1W,5%,0805 ...

  • Texas Instruments 5000 - page 171

    Table 6-7 PCMCIA/Sound Board, P/N 9786205-0001, Parts Listing (continued) Item TI Part No. Quantity Description 123 2248601-0097 8 CHIP RESISTOR,100K OHM,.1W,5%,0805 PKG R1 R23 R30 R54 R95 R62 R63 R176 124 2248601-0073 5 CHIP RESISTOR,10K OHM,.1W,5%,0805 PKG R22 R43 R47 R172 R173 125 2548157-0002 1 IC,HCT273,OCTAL D-TYPE FLIP-FLOP ,PL SOIC U37 127 ...

  • Texas Instruments 5000 - page 172

    Figure 6-7 Keyscan Board, P/N 9786209-0001 Illustrated Parts Listing 6-37 ...

  • Texas Instruments 5000 - page 173

    T a ble 6-8 Keyscan Board, P/N 9786209-0001, Parts Listing P AR T NO:9786209-0001 PWB AS SY ,KEYSCAN BD (II),TM410 0 REV : H/ J Item TI Part No. Quantity Description 01 9786211-0001 REF LOGIC,KEYSCAN BD (II),TM4100 04 9786209-3301 1 BACKSIDE SMT PAR TS FOR 9786209-0001 27 2248743-0002 1 CONN,PCB,FPC ZIF ,R T ANGLE,28-POS,HI-TEMP P2 33 2548631-0001 ...

  • Texas Instruments 5000 - page 174

    T able 6-8 Keyscan Board, P/N 9786209-0001, Parts Listing (continued) Item TI Part No. Quantity Description 46 2248872-0019 2 CAP ,CER CHIP ,33 PF ,10%,100V,COG,0603 PKG C17 C18 47 2248872-0061 8 CAP ,CER CHIP ,.1 UF ,+80/-20%,25V,Y5V ,0603 C1 C2 C4 C5 C6 C7 C22 C23 50 2548468-0001 1 FET,BST82,N-CHANNEL,80V VDS,PLAS SOT -23 Q1 51 2248939-0029 1 RES ...

  • Texas Instruments 5000 - page 175

    T able 6-8 Keyscan Board, P/N 9786209-0001, Parts Listing (continued) Note: The following is a breakout of the topside parts associated with item 3 abov e. P AR T NO: 9786209-3001 TOPSIDE SMT PARTS FOR 9786209-0001 REV: H/ J Item TI Part No. Quantity Description 02 9786210-0001 1 PWB,KEYSCAN B D (II),TM5000 29 2248912-0001 1 CONN ECTOR,FFC,5-PIN,1. ...

  • Texas Instruments 5000 - page 176

    T able 6-9 IR Board, P/N 9798813-0001, Parts Listing P AR T NO: 9798813-0001 PWB ASS Y , UNIVER IR TRANSCEIVER, TM5000 REV : A/ C Item TI Part No. Quantity Description 01 9798815-0001 REF LOGIC,UNIVERSAL IR TRANSCEIVER,TM5000 04 2248954-0002 2 LED,INFRARED EMITTING,T -1 PKG CR1,CR2 05 2563216-0001 1 DIODE,IR DETECTING,60VR,1VF CR3 14 2248332-0007 1 ...

  • Texas Instruments 5000 - page 177

    T able 6-9 IR Board, P/N 9798813-0001, Parts Listing (continued) Note: The following is a breakout of the backside parts assoc iated with item 19 above. P AR T NO: 9798813-3301 BACKSIDE SMT P ARTS FOR 9798813- 0001REV : A/ C Item TI Part No. Quantity Description 02 9798814-0001 1 PWB,UN IVERSAL IR TRANSCEIVER,TM5000P 06 2248600-0061 1 CAP ,CER CHIP ...

  • Texas Instruments 5000 - page 178

    T able 6-10 Sleep Board, P/N 9786148-0001, Parts Listing P AR T NO: 9786148-0001 PWB AS SY , SLEEP SWITCH, LILY REV : / A Item TI Part No. Quantity Description 01 9786150-0001 REF LOGIC, SLEEP SWITCH, LILY 02 9786149-0001 1 PWB, SLEEP S WITCH, TM5000 03 2248941-0002 1 SWITCH, DETECTOR,30V, 0.1A, STRAIGHT ,SMT SW1 04 9786244-0001 1 CABLE ASS Y ,COVE ...

  • Texas Instruments 5000 - page 179

    Table 6-11 LED Board, P/N 9786128-0001, Parts Listing P AR T NO: 9786128-0001 PWB ASSY , LED BOARD, LILY REV : B/ D Item TI Part No. Quantity Description 01 9786130-0001 REF LOGIC,LED BOARD,LILY 03 2567988-0003 2 LED,RED/GREEN-SHARP (VHPGL3ED8//-1) D1,D2 04 9786245-0001 1 CABLE ASSY,LED PCB,TM5000 07 9786128-3301 1 BACKSIDE SMT PAR TS FOR 9786128-0 ...

  • Texas Instruments 5000 - page 180

    Figure 6-11 Inverter Board, P/N 9786134-0001 Illustrated Parts Listing 6-45 ...

  • Texas Instruments 5000 - page 181

    Table 6-12 Inverter PWB, P/N 9786134-0001, Parts Listing P AR T NO:9786134-0001 PWB AS SY ,INVR TR,SHARP TFT UNI,TM5000 REV : E/E Item TI Part No. Quantity Description 02 9786136-0001 1 LOGIC,INVER TER,SHARP ,9.5/10.4TFT,TM5000 03 2248831-0001 1 CAP ,MTLZ PLYEST,N-IND,.068UF ,10%,63V,RAD C1 06 2581049-0002 1 INDUCTOR L1,POWER CHOKE (52100267R2) L1 ...

  • Texas Instruments 5000 - page 182

    T able 6-12 Inverter PWB, P/N 9786134-0001, Parts Listing (continued) Item TI Part No. Quantity Description 32 2248601-0073 1 CHIP RESISTOR,10K OHM,.1W ,5%,0805 PKG R7 33 2248846-0322 1 RES,CHIP ,22.1 K OHM,1%,.10W,0805 PKG R8 34 2248846-0265 1 RES,CHIP ,5.62 K OHM,1%,.10W,0805 PKG R9 35 2248846-0281 1 RES,CHIP ,8.25 K OHM,1%,.10W,0805 PKG R10 36 2 ...

  • Texas Instruments 5000 - page 183

    T able 6-12 Inverter PWB, P/N 9786134-0001, Parts Listing (continued) Item TI Part No. Quantity Description 58 2548534-0014 1 DIODE,VOL TAGE REGULATOR,BZX84,8.2V ,1% Z2 *ALT P/N 2548534-0051 (SEC) *LM ITEM 0059 *ALT P/N 2548534-0125 (SEC) *LM ITEM 0060 59 2548534-0051 0 D IODE,VOLTAGE REGULATOR,BZX84,8.20V ,2% Z2 *ALT P/N 2548534-0014 (PRI) *LM ITE ...

  • Texas Instruments 5000 - page 184

    T able 6-12 Inverter PWB, P/N 9786134-0001, Parts Listing (continued) Item TI Part No. Quantity Description 20 2563148-0001 2 XS TR,MOSFET ,N-CHN,50VDS,25AID,50W,TO-252 Q12,Q14 23 2248600-0061 1 CAP ,CER CHIP ,.1 UF ,20%,50V,Z5U,0805 PKG C22 25 2248600-0055 1 CAP ,CER CHIP ,33000 PF,10%,50V ,X7R,0805 P C11 26 2248600-0037 2 CAP ,CER CHIP ,1000 PF,1 ...

  • Texas Instruments 5000 - page 185

    Figure 6-12 DAB Board, P/N 9786273-0001 6-50 Illustrated Parts Listing ...

  • Texas Instruments 5000 - page 186

    Table 6-13 DAB Board, P/N 9786273-0001, Parts Listing P AR T NO:9786273-0001 PWB AS SY ,DAB #2 ,SHARP 10.4TFT ,TM5000 REV: F/G Item TI Part No. Quantity Description 01 9786275-0001 REF LOGIC,DAB #2,SHARP 10.4TFT ,TM5000 09 2363830-0008 .0030 LABEL,SYMBOLIZATION (.375" X .375") 11 9786273-3301 1 BACKSIDE SMT PAR TS FOR 9786273-0001 13 2248 ...

  • Texas Instruments 5000 - page 187

    7 Schematic Diagrams 7.1 Introduction This section contains schematic diagrams for the pinted wiring boards (PWBs) used in the T ravelMate 5000 Series of Notebook Computers. Table 7-1 contains an index to the drawings in this section. Table 7-1 Schematic Drawing Index Board Type TI Part No. Fig. No. Main Board 9798803 7-1 PCMCIA/Sound Board 9786205 ...

  • Texas Instruments 5000 - page 188

    Figure 7-1 Figure 7-1 Main Board, Part No. 9798803, Logic Diagram (Sheet 1 of 22) 7-2 Schematic Diagrams ...

  • Texas Instruments 5000 - page 189

    Figure 7-1 Figure 7-1 Main Board, Part No. 9798803, Logic Diagram (Sheet 2 of 22) Schematic Diagrams 7-3 ...

  • Texas Instruments 5000 - page 190

    Figure 7-1 Figure 7-1 Main Board, Part No. 9798803, Logic Diagram (Sheet 3 of 22) 7-4 Schematic Diagrams ...

  • Texas Instruments 5000 - page 191

    Figure 7-1 Figure 7-1 Main Board, Part No. 9798803, Logic Diagram (Sheet 4 of 22) Schematic Diagrams 7-5 ...

  • Texas Instruments 5000 - page 192

    Figure 7-1 Figure 7-1 Main Board, Part No. 9798803, Logic Diagram (Sheet 5 of 22) 7-6 Schematic Diagrams ...

  • Texas Instruments 5000 - page 193

    Figure 7-1 Figure 7-1 Main Board, Part No. 9798803, Logic Diagram (Sheet 6 of 22) Schematic Diagrams 7-7 ...

  • Texas Instruments 5000 - page 194

    Figure 7-1 Figure 7-1 Main Board, Part No. 9798803, Logic Diagram (Sheet 7 of 22) 7-8 Schematic Diagrams ...

  • Texas Instruments 5000 - page 195

    Figure 7-1 Figure 7-1 Main Board, Part No. 9798803, Logic Diagram (Sheet 8 of 22) Schematic Diagrams 7-9 ...

  • Texas Instruments 5000 - page 196

    Figure 7-1 Figure 7-1 Main Board, Part No. 9798803, Logic Diagram (Sheet 9 of 22) 7-10 Schematic Diagrams ...

  • Texas Instruments 5000 - page 197

    Figure 7-1 Figure 7-1 Main Board, Part No. 9798803, Logic Diagram (Sheet 10 of 22) Schematic Diagrams 7-11 ...

  • Texas Instruments 5000 - page 198

    Figure 7-1 Figure 7-1 Main Board, Part No. 9798803, Logic Diagram (Sheet 11 of 22) 7-12 Schematic Diagrams ...

  • Texas Instruments 5000 - page 199

    Figure 7-1 Figure 7-1 Main Board, Part No. 9798803, Logic Diagram (Sheet 12 of 22) Schematic Diagrams 7-13 ...

  • Texas Instruments 5000 - page 200

    Figure 7-1 Figure 7-1 Main Board, Part No. 9798803, Logic Diagram (Sheet 13 of 22) 7-14 Schematic Diagrams ...

  • Texas Instruments 5000 - page 201

    Figure 7-1 Figure 7-1 Main Board, Part No. 9798803, Logic Diagram (Sheet 14 of 22) Schematic Diagrams 7-15 ...

  • Texas Instruments 5000 - page 202

    Figure 7-1 Figure 7-1 Main Board, Part No. 9798803, Logic Diagram (Sheet 15 of 22) 7-16 Schematic Diagrams ...

  • Texas Instruments 5000 - page 203

    Figure 7-1 Figure 7-1 Main Board, Part No. 9798803, Logic Diagram (Sheet 16 of 22) Schematic Diagrams 7-17 ...

  • Texas Instruments 5000 - page 204

    Figure 7-1 Figure 7-1 Main Board, Part No. 9798803, Logic Diagram (Sheet 17 of 22) 7-18 Schematic Diagrams ...

  • Texas Instruments 5000 - page 205

    Figure 7-1 Figure 7-1 Main Board, Part No. 9798803, Logic Diagram (Sheet 18 of 22) Schematic Diagrams 7-19 ...

  • Texas Instruments 5000 - page 206

    Figure 7-1 Figure 7-1 Main Board, Part No. 9798803, Logic Diagram (Sheet 19 of 22) 7-20 Schematic Diagrams ...

  • Texas Instruments 5000 - page 207

    Figure 7-1 Figure 7-1 Main Board, Part No. 9798803, Logic Diagram (Sheet 20 of 22) Schematic Diagrams 7-21 ...

  • Texas Instruments 5000 - page 208

    Figure 7-1 Figure 7-1 Main Board, Part No. 9798803, Logic Diagram (Sheet 21 of 22) 7-22 Schematic Diagrams ...

  • Texas Instruments 5000 - page 209

    T o Be Supplied Figure 7-1 Figure 7-1 Main Board, Part No. 9798803, Logic Diagram (Sheet 22 of 22) Schematic Diagrams 7-23 ...

  • Texas Instruments 5000 - page 210

    Figure 7-2 Figure 7-2 PCMCIA/Sound Board, P/N 9786205, Logic Diagram (Sheet 1 of 12) 7-24 Schematic Diagrams ...

  • Texas Instruments 5000 - page 211

    Figure 7-2 Figure 7-2 PCMCIA/Sound Board, P/N 9786205, Logic Diagram (Sheet 2 of 12) Schematic Diagrams 7-25 ...

  • Texas Instruments 5000 - page 212

    Figure 7-2 Figure 7-2 PCMCIA/Sound Board, P/N 9786205, Logic Diagram (Sheet 3 of 12) 7-26 Schematic Diagrams ...

  • Texas Instruments 5000 - page 213

    Figure 7-2 Figure 7-2 PCMCIA/Sound Board, P/N 9786205, Logic Diagram (Sheet 4 of 12) Schematic Diagrams 7-27 ...

  • Texas Instruments 5000 - page 214

    Figure 7-2 Figure 7-2 PCMCIA/Sound Board, P/N 9786205, Logic Diagram (Sheet 5 of 12) 7-28 Schematic Diagrams ...

  • Texas Instruments 5000 - page 215

    Figure 7-2 Figure 7-2 PCMCIA/Sound Board, P/N 9786205, Logic Diagram (Sheet 6 of 12) Schematic Diagrams 7-29 ...

  • Texas Instruments 5000 - page 216

    Figure 7-2 Figure 7-2 PCMCIA/Sound Board, P/N 9786205, Logic Diagram (Sheet 7 of 12) 7-30 Schematic Diagrams ...

  • Texas Instruments 5000 - page 217

    Figure 7-2 Figure 7-2 PCMCIA/Sound Board, P/N 9786205, Logic Diagram (Sheet 8 of 12) Schematic Diagrams 7-31 ...

  • Texas Instruments 5000 - page 218

    Figure 7-2 Figure 7-2 PCMCIA/Sound Board, P/N 9786205, Logic Diagram (Sheet 9 of 12) 7-32 Schematic Diagrams ...

  • Texas Instruments 5000 - page 219

    Figure 7-2 Figure 7-2 PCMCIA/Sound Board, P/N 9786205, Logic Diagram (Sheet 10 of 12) Schematic Diagrams 7-33 ...

  • Texas Instruments 5000 - page 220

    Figure 7-2 Figure 7-2 PCMCIA/Sound Board, P/N 9786205, Logic Diagram (Sheet 11 of 12) 7-34 Schematic Diagrams ...

  • Texas Instruments 5000 - page 221

    Figure 7-2 Figure 7-2 PCMCIA/Sound Board, P/N 9786205, Logic Diagram (Sheet 12 of 12) Schematic Diagrams 7-35 ...

  • Texas Instruments 5000 - page 222

    Figure 7-3 Figure 7-3 Keyscan Board, P/N 9786209, Logic Diagram (Sheet 1 of 5) 7-36 Schematic Diagrams ...

  • Texas Instruments 5000 - page 223

    Figure 7-3 Figure 7-3 Keyscan Board, P/N 9786209, Logic Diagram (Sheet 2 of 5) Schematic Diagrams 7-37 ...

  • Texas Instruments 5000 - page 224

    Figure 7-3 Figure 7-3 Keyscan Board, P/N 9786209, Logic Diagram (Sheet 3 of 5) 7-38 Schematic Diagrams ...

  • Texas Instruments 5000 - page 225

    Figure 7-3 Figure 7-3 Keyscan Board, P/N 9786209, Logic Diagram (Sheet 4 of 5) Schematic Diagrams 7-39 ...

  • Texas Instruments 5000 - page 226

    Figure 7-3 Figure 7-3 Keyscan Board, P/N 9786209, Logic Diagram (Sheet 5 of 5) 7-40 Schematic Diagrams ...

  • Texas Instruments 5000 - page 227

    Figure 7-4 Figure 7-4 Sleep Switch Board, P/N 9786148, Logic Diagram (Sheet 1 of 1) Schematic Diagrams 7-41 ...

  • Texas Instruments 5000 - page 228

    Figure 7-5 Figure 7-5 IR Board, P/N 9798813, Logic Diagram (Sheet 1 of 2) 7-42 Schematic Diagrams ...

  • Texas Instruments 5000 - page 229

    Figure 7-5 Figure 7-5 IR Board, P/N 9798813, Logic Diagram (Sheet 2 of 2) Schematic Diagrams 7-43 ...

  • Texas Instruments 5000 - page 230

    Figure 7-6 Figure 7-6 LED Board, P/N 9796128, Logic Diagram (Sheet 1 of 2) 7-44 Schematic Diagrams ...

  • Texas Instruments 5000 - page 231

    Figure 7-6 Figure 7-6 LED Board, P/N 9796128, Logic Diagram (Sheet 2 of 2) Schematic Diagrams 7-45 ...

  • Texas Instruments 5000 - page 232

    Figure 7-7 Figure 7-7 8/16 MB RAM Exp. Board, P/N 9798816, Logic Diagram (Sheet 1 of 1) 7-46 Schematic Diagrams ...

  • Texas Instruments 5000 - page 233

    Figure 7-8 Figure 7-8 Inverter Board, P/N 9796134, Logic Diagram (Sheet 1 of 2) Schematic Diagrams 7-47 ...

  • Texas Instruments 5000 - page 234

    Figure 7-8 Figure 7-8 Inverter Board, P/N 9796134, Logic Diagram (Sheet 2 of 2) 7-48 Schematic Diagrams ...

  • Texas Instruments 5000 - page 235

    Figure 7-8 Figure 7-9 Display Adapter Board, P/N 9786273, Logic Diagram (Sheet 1 of 3) Schematic Diagrams 7-49 ...

  • Texas Instruments 5000 - page 236

    Figure 7-9 Figure 7-9 Display Adapter Board, P/N 9786273, Logic Diagram (Sheet 2 of 3) 7-50 Schematic Diagrams ...

  • Texas Instruments 5000 - page 237

    Figure 7-9 Figure 7-9 Display Adapter Board, P/N 9786273, Logic Diagram (Sheet 3 of 3) Schematic Diagrams 7-51 ...

  • Texas Instruments 5000 - page 238

    A Character Sets A.1 Introduction The T ravelMate Computer character sets are identical to the IBM Code Pages for MS-DOS . This appendix shows the character sets for Code Page 437 (United States), 850 (Multilingual), 863 (Canadian-French), and 865 (Nordic), with the decimal and hexadecimal codes for each character . The four -character sets contain ...

  • Texas Instruments 5000 - page 239

    Figure A-1 Code Page 437, United States A-2 Character Sets ...

  • Texas Instruments 5000 - page 240

    Figure A-2 Code Page 850, Multilingual Character Sets A-3 ...

  • Texas Instruments 5000 - page 241

    Figure A-3 Code Page 863, Canadian-French A-4 Character Sets ...

  • Texas Instruments 5000 - page 242

    Figure A-4 Code Page 865, Nordic Character Sets A-5 ...

  • Texas Instruments 5000 - page 243

    B Keyboar d Layouts B.1 Introduction This appendix contains the keyboard layouts for domestic and international models of the T ravelMate 5000 Series Notebook Computers. Q W E R T Y Ente r Caps Lock A SD F G H X C V B N Z Fn Alt 12 3 4 5 6 F1 F2 F3 F5 F6 F7 Paus e F4 Scr Lk F1 1 F 1 2 Ins Del Prt Sc SysRq Ctrl Home End PgUp Pg Dn Alt 4 56 U I O P 1 ...

  • Texas Instruments 5000 - page 244

    Æ > < Q W E R T Y Ent er Caps Loc k A SD F G H X C V B N Z Fn Alt F1 F2 F3 F5 F6 F7 Pause F4 Scr Lk F11 F 1 2 N u m L k Ins Del Prt Sc SysR q Ctrl Hom e End Pg Up Pg Dn Alt Gr 0 M 7 9 8 F9 F8 F10 Set Up Esc J K L U I O P 0 Break 1 2 34 5 % 1/2 6 & 7 8 9 0 Å Shift Shi ft () 4 56 1 23 Figure B-3 Danish Keyboard Layout M Suppr Ar.Dé f Con ...

  • Texas Instruments 5000 - page 245

    Y Ende Bild Pos 1 Strg Ein fg A U Konfig Alt G r O Q W ER T Z Ent er A SD FG H X C V B N Fn 1 2 34 56 Esc F1 F2 F3 F5 F6 F7 Pause F4 F11 F12 Entf Druck S-Ab f 4 56 U I O P 1 23 J K L 0 0 M 7 90 8 F9 F8 F1 0 2 3 β 7 9 8 Num Roll Un tbr Alt > < % & ( ) Bild Figure B-5 German Keyboard Layout à Conf ig é è ò Inv io ì Alt G r Stam p Fine ...

  • Texas Instruments 5000 - page 246

    Q W E R T Y Ente r Caps Lock A SD F G H X C V B N Z Fn Alt F1 F2 F3 F5 F6 F7 Pause F4 Scr Lk F11 F 12 Nu m L k Ins Del Pr t Sc SysRq Ctrl Hom e En d P gUp PgDn Alt Gr 4 56 U I O P 12 3 J K L 0 0 M 7 9 8 F9 F8 F1 0 Set Up Esc Break 1 2 34 5 67 8 9 0 Å Æ ) Shi ft Sh i f t & % ( > < Figure B-7 Norwegian Keyboard Layout 1 2 3 45 678 9 0 ¡ ...

  • Texas Instruments 5000 - page 247

    1 2 3 45 Å 1/2 67 8 90 Q W ER T Y Caps Loc k A SD FG H X C V B N Z Fn Alt F1 F2 F3 F5 F6 F7 Pause F4 Scr Lk F1 1 F12 N u m Lk Ins Del Prt Sc SysRq Ctrl Home End PgUp PgDn Alt Gr 4 56 U I O P 1 23 J K L 0 0 M F9 F8 F1 0 Set Up Esc B r eak Ent er O A > < Shif t Shift % & ( ) 7 9 8 Figure B-9 Swedish/Finnish Keyboard Layout Q W E R T Z Ente ...

  • Texas Instruments 5000 - page 248

    1 2 3 45 6 7 8 9 0 c a o Q W E R T Y Enter Caps Loc k A SD F G H X C V B N Z Fn Alt F1 F2 F3 F5 F6 F7 Pause F4 Scr Lk F11 F12 N u m L k Ins Del Prt Sc SysR q Ctrl Hom e End Pg Up Pg Dn Alt Gr 4 56 U I O P 12 3 J K L 0 0 M 7 9 8 F9 F8 F10 Set Up Esc B reak > < % & ( ) Figure B-11 PortugeseKeyboard Layout 1 2345 6 7 89 0 7 89 1 2 3 A SD FG ...

  • Texas Instruments 5000 - page 249

    C PC-Doctor Diagnostics C.1 Introduction The TM5000 Series Notebooks are shipped with PC-Doctor , a power ful diagnostics tool that can help you deter mine the hardware configuration of a local or remote system, benchmark its per formance, analyze the per formance of all subsystems, and per for m a suite of interactive and non-interactive tests on ...

  • Texas Instruments 5000 - page 250

    C.3 Keyboar d Navigation The keys shown in Table C-1 can be used to navigate through the PC-Doctor menus: T a ble C-1 PC-Doctor Key Assignments In addition, when you select All Tests from the Diagnostics menu, the Test Selection Menu that appears uses the keys listed in Table C-2: T able C-2 Test Selection Menu Special Keys C.4 Mouse Navigation Y o ...

  • Texas Instruments 5000 - page 251

    C.5 PC-Doctor Menus There are several selections available from the menu bar of the PC-Doctor Diagnostics main menu. These include: • ? • Diagnostics • Interactive Tests • Hardware Info • Utility • Quit C.5.1 Online Help (?) To obtain context sensitive help from any menu, press F1 . Pressing F1 twice (or clicking on the question mark in ...

  • Texas Instruments 5000 - page 252

    • Pass Count - selects how many times tests are repeated. The highest limit is 9999 times. • Test Logging - opens the Log Options menu that lets you define how test results are printed or stored to a file during testing. By default, PC-Doctor produces a test result file at the end of testing if an error was detected. • Switch LCD - lets you c ...

  • Texas Instruments 5000 - page 253

    C.5.4 Hardware Info Menu This menu contains functions that deter mine and report on the setup of the computer . None of these functions per for m diagnostic tests; however any errors are included in the reports. The following functions are available from the Hardware Info menu: • System Configuration - lists main system configuration data. • Me ...

  • Texas Instruments 5000 - page 254

    • Remote Operation - enables remote control if available • Tech Support Form - allows you to collect information about the current system • Battery Rundown - quickly deep-discharges the NiCad or NiMh battery of a laptop computer. C.6 Quitting PC-Doctor Y ou can quit PC-Doctor in the following ways: • Exit to DOS ( Alt-F4 ) - takes you back ...

  • Texas Instruments 5000 - page 255

    D Configuring Memory D.1 Introduction This appendix describes the various areas of RAM within the TM5000 Series Notebook Computers and how you can make the Notebooks more ef ficient by configuring them with the memory management device drivers supplied with your computer . D.2 Memory Areas MS-DOS directly accesses up to 640 KB of RAM for the e xecu ...

  • Texas Instruments 5000 - page 256

    D.2.1 Extended Memory Extended Memory is defined as intern al system RAM above 1024 KB. MS-DOS or your applications (that support Extended Memory) can access Extended Memory if your system is configured with an Extended Memory driver (XMS). Extended Memory drivers manage the Extended Memory ensuring that two programs do not use the same part of mem ...

  • Texas Instruments 5000 - page 257

    The Expanded Memory Manager included with MS-DOS ( EMM386.EXE ) manages the inter face between the program and Expanded Memory, bringing data in and out thr ough the page frame as r e qu ir e d . Before you can use Expanded Memory, you must install the EMM386.EXE device driver as described in the next section, “Memory Device Drivers.” Y ou need ...

  • Texas Instruments 5000 - page 258

    D.3.2 EMM386.EXE The EMS memory manager provided with your computer , EMM386.EXE, confor ms to version 4.00 of the Lotus/Intel/Microsoft Expanded Memory Specification (EMS). EMM386.EXE enables areas of system memory to be used as Expanded Memory. The EMM386.EXE device driver must be installed before you can use Expanded Memory. To install EMM386.EX ...

  • Texas Instruments 5000 - page 259

    E Scr een Standards E.1 Introduction This appendix summarizes the screen standards supported by your computer’s inter nal display adapter . The following tables display screen standard and extended modes for exter nal monitors, the LCD, and additional SIMULSCAN modes. E.2 Standard VGA Modes T able E-1 Exter nal Monitors - Standard VGA Modes a. 8 ...

  • Texas Instruments 5000 - page 260

    E.3 Extended VGA Modes T able E-2 - Exter nal Mo nitors Extended VGA Modes Hex Mode Display Mode Number of Colors Resolution Refresh Rate 11 a Graphics 2/256 640 x 480 72 11 a Graphics 2/256 640 x 480 75 11a Graphics 16/256 640 x 480 72 12 a Graphics 16/256 640 x 480 75 14 Text 16/256 1056 x 400 70 54 Text 16/256K 1056 x 350 70 55 Text 16/256K 1056 ...

  • Texas Instruments 5000 - page 261

    Table E-2 Exter nal Monitors Extended VGA Modes (cont.) Hex Mode Display Mode Number of Colors Resolution Refr e sh Rate 5D Graphics 16/256K 1024 x 768 70 5D Graphics 16/256K 1024 x 768 72 5D Graphics 16/256K 1024 x 768 75 5E Graphics 256/256K 640 x 400 70 5F Graphics 256/256K 640 x 480 60 5F Graphics 256/256K 640 x 480 72 5F Graphics 256/256K 640 ...

  • Texas Instruments 5000 - page 262

    Table E-2 Exter nal Monitors Extended VGA Modes (cont.) a IBM standard VGA mode enhanced for higher vertical frequency b Mode 54 uses 1056 x 344 addressable pixels (text mode), however it uses 1056 x 350 timing. c Application programs should use mode 6A rather than mode 58 to retain compatibility with other VGA BIOS products d Interlaced mode e T r ...

  • Texas Instruments 5000 - page 263

    E.4 Standard LCD Modes T able E-3 Standard VGA LCD-Only Video Modes Hex Mode Display Mode # of Gray Shades (Mono) Number of Colors Char . Per Row Char . Cell (pixels) Screen Resolution 0, 1 Text 16/16 16/256K 40 x 25 8 x 16 360 x 400 2,3 Text 16/16 16/256K 80 x 25 8 x 16 720 x 400 4,5 Graphics 4/64 4/256K 40 x 25 8 x 8 320 x 200 6 Graphics 2/16 2/2 ...

  • Texas Instruments 5000 - page 264

    E.5 Extended LCD Modes T a ble E-4 Extended LCD-Only Video Modes E.6 Standard SimulSCAN Modes T a ble E-5 Standard SimulSCAN Video Modes Hex Mode Number of Colors Char . Per Row Char . Cell (pixels) Screen Resolution Vid eo Clock (MHz) 5E 256/256K 80 x 25 8 x 16 640 x 400 25 5F 256/256K 80 x 30 8 x 16 640 x 480 31.5 64 64K --- --- 640 x 480 25 66 c ...

  • Texas Instruments 5000 - page 265

    E.7 Extended SimulScan Modes T a ble E-6 Extended SimulSCAN Video Modes a T rue-color packed-pixel mode Hex Mode Number of Colors Char . Per Row Char . Cell (pixels) Screen Resolution 5E 256/256K 80 x 25 8 x 16 640 x 400 5F 256/256K 80 x 30 8 x 16 640 x 480 64 64K --- --- 640 x 480 66 a 32K a --- --- 640 x 480 Screen Standards E-7 ...

  • Texas Instruments 5000 - page 266

    F Added Interrupt 15 Functions F .1 Introduction This section describes the interrupt 15h functions that have been added to the TM5000 BIOS. Only added functions are described in this specification. All standard BIOS calls are described in the PhoenixBIOS Customer Docu- mentation manual. F .2 Function 46h - Subfunction 00h Read Power/Modem Configur ...

  • Texas Instruments 5000 - page 267

    AL = Power Conservation Configuration 76543210 Power Source (0 = Internal, 1 = Exter nal) Battery State (00 = Good, 01 = Low State 1, 10 = Reserved, 11 = Low State 2) Power Conservation Mode (0 0 = Auto, 01 = On, 10 = Of f, 11 = Reserved) Reserved BH = Default system inactivity timeout (minutes) BL = Current system inactivity timeout (minutes) CH = ...

  • Texas Instruments 5000 - page 268

    Returns: AH = Error Code 00h = No Error 01h = Invalid Parameter 02h = No Modem BL = System inactivity timeout (in minutes) CL = Video inactivity timeout (in minutes) DH = Modem State 00h = Tur ned modem Off 01h = Tur ned modem On FFh = Didn’t modify state DL = Fixed Disk inactivity timeout (in minutes) CY = Set on Error (see AH) F .4 Function 46h ...

  • Texas Instruments 5000 - page 269

    Parameter BL V alue Battery Count BH = 00h Only legal value for this model is 1 Battery Level (0%) BH = 01h 0 = empty, 100 = full, increment by 1 Low Battery W ar ning T ime (min) BH = 02h 0 - 15, increme nt by 1 Critical Low Battery W arning (min) BH = 03h 0 = Disabled 1 = Enabled Battery Auto Full BH = 04h 0 = Disabled 1 = Enabled View Mod e BH = ...

  • Texas Instruments 5000 - page 270

    Returns: AH = 00h AL = Current CPU Speed 00h = Low 01h = High 02h = Medium BL = Current Auto Setting 00h = Of f. 01h = On F .6 Function F8h - Set CPU Speed This function sets the CPU speed to low, medium, or high. Also, see related function F7h. For notebook computers configured with a i486DX2 CPU, this function will not per form a speed switch if ...

  • Texas Instruments 5000 - page 271

    Call with: AH = F9h AL = 5Eh Returns: AH = Error Code 00h = No Error 86h = Invalid Parameter AL = Reserved BH = Model Type 76543210 System Type 000 = Reserved 001 = Laptop 010 = Notebook 011 - 111 = Reserved Internal Floppy 0 = No 1 = Y es VGA Manufacturer 0000 = W ester n Digital 0001 = Reserved 00 10 = Cirrus 0011 - 1111 = Res erved BL = Misc Inf ...

  • Texas Instruments 5000 - page 272

    76543210 Reserved LCD Type 0000 = Mono 0001 = Passive Color 0010 = Active Color 0011 = EL 0100 - 1111 = Res erved DL = Reserved CY = Set on error (see AH) F .8 Function F9h - Subfunction 60h Get Standby Level This function retur ns the current standby level, and the maximum level currently supported. This maximum level should be checked before sett ...

  • Texas Instruments 5000 - page 273

    Returns: AH =Error Code 00h = No Error 86h = Invalid Parameter F .10 Function F9h - Subfunction 63h Get Extended Model ID This function retur ns a variety of information about the system, including the model ID and installed devices. Also, see related functions F95Eh and FA00 h. Call with: AH = F9h AL = 63h BX = 4954h - Modifies DS and ES for strin ...

  • Texas Instruments 5000 - page 274

    76543210 Expansion Station (0 = Not install ed, 1 = Installed) SCSI Option (0 = Not install ed, 1 = Installed) External Keyboard (0 = Not installed, 1 = Installed) Numeric Keypad (Always retur ns 1) Battery 1 (Always retur ns 1) Battery 2 (Always retur ns 0) Reserved CL = Amount of RAM installed (in MB) DH = Major version number (only if called wit ...

  • Texas Instruments 5000 - page 275

    Call with: AH = FA h AL = 03h BH = Request Parameter 00h = Reverse 01h = Expanded Mode 02h = Block Cursor 03h = Display 04h = Monitor Type 05h = LCD Power 06h = Backlight 07h = Text Resolution 08h = Contrast Enhancement 09h = LCD Palette 0Ah = Exter nal VGA FFh = Retur n zero based max request number Returns: AH = Error Code 00h = No Error 86h = In ...

  • Texas Instruments 5000 - page 276

    Parameter B L V alue Reverse BH = 00h 00h = On 01h = Graphics 02h = Text 03h = Off FFh = Not Supported Expanded Mode BH = 01h 00h = Of f 01h = On FFh = Not Supported Block Cursor BH = 02h 00h = Of f 01h = On FFh = Not Supported Display BH = 03h 00h = LCD 01h = CR T 02h = Both FFh = Not Supported Monitor Type BH = 04h 00h = VGA 01h = 8514-compatible ...

  • Texas Instruments 5000 - page 277

    F .13 Function F Ah - Subfunction 05h Get Setup Infor mation Retur ns the state of various setup features. Also, see related function FA03 h. Call with: AH = FA h AL = 05h BH = Request Parameter 00h = Expansion Bus 01h = System T imeout Interval 02h = System T imeout Action 03h = Auto W akeup Interval 04h = Auto W akeup Action 05h = Cover Closed Ac ...

  • Texas Instruments 5000 - page 278

    BL = Setup Parameter Parameter BL V alue Expansion B us BH = 00h 00h = Standard 01h = Enhanced 02h = Auto System T imeout Interval BH = 01h 00h = Always On 01h = 1 Minute 02h = 2 Minutes 03h = 5 Minutes 04h = 10 Minutes 05h = 15 Minutes System T imeout Action BH = 02h 00h = Backlight Off 01h = Suspend Auto W akeup Interval BH = 03h 00h = 5 Min utes ...

  • Texas Instruments 5000 - page 279

    BL = Setup Parameter (cont.) Parameter BL V alue Speaker BH = 0Fh 00h = Off 01h = On Activity Monitor BH = 10h 76543210 Monitore d if set Keyboard T ravelPoi nt Disk Acces s Comm Ports Reserved Processor Cache BH = 11h 00h = Of f 01h = On Standard Comm Parm s BH = 12h 76543210 W ord Length 10 = 7 b its 11 = 8 b its Stop Bits 0 = 1 bit 1 = 2 bits Pa ...

  • Texas Instruments 5000 - page 280

    BL = Setup Parameter (cont.) Parameter BL V alue Standard Comm Control Lines BH = 13h 7 6543210 DCD 0 = Normal 1 = Force On DSR 0 = Normal 1 = Force On CTS 0 = Normal 1 = Force On Reserved Option Comm Parms BH = 14h See description for Standard Comm Parms (BH = 12h) Keyboard Par ms BH = 15h 7 6543210 Scroll Lock at boot 0 = Off 1 = On Caps Lock at ...

  • Texas Instruments 5000 - page 281

    BL = Setup Parameter (cont.) Parameter BL V alue Shadow BIOS Info BH = 16h 76543210 Shadow Video BIOS 0 = No 1 = Y es Shadow System BIOS 0 = No 1 = Y es Shadow Everything 0 = No 1 = Y es Reserved Power Savings (Merlin systems only) BH = 17h 00h = Off 01h = On 02h = Auto Advanced OS P ower (Merlin systems only) BH = 18h 00h = Off 01h = On 02h = Auto ...

  • Texas Instruments 5000 - page 282

    G BIOS Updates G.1 Introduction This appendix describes the procedure for rebuilding TM5000 BIOS files using floppy updates and reflashing BIOS ROM with the floppy updates. G.2 Update Procedure Use the following procedure to incorporate BIOS updates: 1. Tur n off the computer and reboot to a clean system (non-Windows environment). 2. Move to the UT ...

  • Texas Instruments 5000 - page 283

    Alphabetical Index A AC Power Adapter , 2-19 Specifications, 1-41 Accessories, 1-22 Assemblies, Customer Replaceable Units (CRUs), 5-8 Assemblies, Field Replaceable (FRUs)(Section 5) Cover -Display Assembly, 5-4 Cable Assembly, TFT , 5-5 Cable Assembly, Inverter ,5-5 Cable Assembly, DAB to Base (Left), 5-5 Cable Assembly, DAB to Base (right), 5-5 D ...

  • Texas Instruments 5000 - page 284

    Field Replaceable Units (FRUs),5-4, 5-5, 5-6, 5-7 Preventive Maintenance,5-1 T roubleshooting,Section 4 Field Replaceable Assemblies,Section 5 Flash ROM, 1-15 Floppy Controller , 1-30, 1-32, 1-38 Floppy Drive, 1-5,1-16, 5-18 Flowchart, T roubleshooting, 4-2 For matting a Hard Disk,See DOS/W indows Users Manual. H Hard Disk Controller , Hard Disk Sy ...

  • Texas Instruments 5000 - page 285

    AC Adapter , 2-19 LED Indicators, Section 3 Power Switch, 3-2, 3-3 Power Saving Mode, 3-8 Power Switch, 3-6 Product Models, 1-1, 1-24 Productivity Software,1-6 (Also see User’s Manual) Preventive Maintenance Procedures, 5-1 Product Overview, 1-1 Q Quick Check Procedures, 5-1 R RAM Memory, 1-15, 1-22, 2-3 Removal/Replacement Procedures (Section 5) ...

  • Texas Instruments 5000 - page 286

    Printed in U.S.A. ...

Manufacturer Texas Instruments Category Laptop

Documents that we receive from a manufacturer of a Texas Instruments 5000 can be divided into several groups. They are, among others:
- Texas Instruments technical drawings
- 5000 manuals
- Texas Instruments product data sheets
- information booklets
- or energy labels Texas Instruments 5000
All of them are important, but the most important information from the point of view of use of the device are in the user manual Texas Instruments 5000.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Texas Instruments 5000, service manual, brief instructions and user manuals Texas Instruments 5000. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Texas Instruments 5000.

Similar manuals

A complete manual for the device Texas Instruments 5000, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Texas Instruments 5000 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Texas Instruments 5000.

A complete Texas Instruments manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Texas Instruments 5000 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Texas Instruments 5000, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Texas Instruments 5000, that we can find in the current document
3. Tips how to use the basic functions of the device Texas Instruments 5000 - which should help us in our first steps of using Texas Instruments 5000
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Texas Instruments 5000
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Texas Instruments 5000 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Texas Instruments 5000?

Use the form below

If you did not solve your problem by using a manual Texas Instruments 5000, ask a question using the form below. If a user had a similar problem with Texas Instruments 5000 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)