English dropdown-ico

Manual Renesas H8S/2214 Series

22 pages 0.47 mb
Download

Go to site of 22

Summary
  • Renesas H8S/2214 Series - page 1

    H8S/2214 Series TBP-112 User System Interface Cable (HS2214ECB61H) for E6000 Emulator User’s Manual HS2214ECB61HE(C) ...

  • Renesas H8S/2214 Series - page 2

    Cautions 1. Renesas neither warrants nor grants li censes of any rights of Renesas’s or any t hird party’s patent, copyright, t rademark, or other intel lect ual property rights for informat ion contained in this document. Renesas bears no responsibility fo r problem s that may arise with third party’s rights, including int ellectual property ...

  • Renesas H8S/2214 Series - page 3

    i Preface Thank you for purchasing this user system interface cable (HS2214ECB61H) for the Renesas’s original mi crocomputer H8S/2214serie s. The HS2214ECB61H is a user system interface cable that connects an H8S/2214 series E6000 emulator (HS2214EPI61H; hereinafter referred to as the emul ator) to the IC socket for a TBP-112 package for the H8S/ ...

  • Renesas H8S/2214 Series - page 4

    ii Contents Section 1 Configuration .................................................................................... 1 Section 2 Connection Procedures ...................................................................... 3 2.1 Connecting User System Interf ace Cable to Em ulat or Station ......................................... 3 2.2 Connecti ...

  • Renesas H8S/2214 Series - page 5

    Section 1 Configuration CAUTION Use an CSPACK112A1110H01 socket (socket (manufactured by Toky o Eletech Corporation) for the TBP-112 package IC socket on the user system. Figure 1 shows the configuration of the HS2214E CB61H user system interface cable for the TBP-112 package. User system IC socket To emulator station Cable body Cable head Screws ( ...

  • Renesas H8S/2214 Series - page 6

    2 Table 1 lists the HS2214ECB 61H components. Please make sure y ou have all of these com ponents when unpacking. Table 1 HS2214ECB61H Components No. Component Quantity Remarks 1 Cable body 1 Includes flat cable 2 Cable head 1 3 IC socket 1 For the TBP-112 package 4 Spacer 1 For installing an TBP-112 packaged MCU 5 Cover 1 For installing an TBP-112 ...

  • Renesas H8S/2214 Series - page 7

    Section 2 Connection Procedures 2.1 Connecting User System Interface Cable to Emulator Station W ARNING Observe the precautions listed below. Failure to do so will result in a FIRE HAZARD and w ill damage the user system and the emulator product or will result in PERSONAL INJURY. The USER PROGRAM will be LOST. 1. Always switch OFF the user system a ...

  • Renesas H8S/2214 Series - page 8

    Figure 2 Connecting User System Int erface Cable to Emulator Station 4 ...

  • Renesas H8S/2214 Series - page 9

    2.2 Connecting User System Interface Cable to User System W ARNING Always switch OFF the user system and the emulator product before the USER SYSTEM INTERFACE CABLE is connected to or removed from any part. Before connecting, make sure that pin 1 on both sides are correctly aligned. Failure to do so will result in a FIRE HAZARD and will damage the ...

  • Renesas H8S/2214 Series - page 10

    6 (4) Notes on soldering the IC socket a) The IC socket is larger th an the actual IC package; theref ore, refer to figure 7 for the installati on of other components. b) Do not instal l components that occupy large volum e close to the IC socket. Such components will prevent the convectiv e flow of heat during reflow. c) Since the IC socket has a ...

  • Renesas H8S/2214 Series - page 11

    7 CAUTION 1. Never dip the IC socket in flux or use wash to clean the IC socket. This is because flux may remain inside the IC socket due to the IC socket’s structure. When using the IC socket with other DIP products, never clean the other DIP products with flux because the flux may enter the connector through the guide pins of the IC socket. 2. ...

  • Renesas H8S/2214 Series - page 12

    2.2.2 Inserting Cable Head CAUTION Check the location of pin 1 before inserting. Align pin 1 on the IC socket for an TB P-112 package on the user system wi th pin 1 on the user system interface cable head, and inse rt the user system interface cable head into the IC socket on the user system, as shown in fi gure 3. Figure 3 Connecting User System I ...

  • Renesas H8S/2214 Series - page 13

    2.2.3 Fastening Cable Head CAUTION 1. Use the screwdriver w hose head matches the screw head. 2. The tightening torque must be 0.054 N•m or less. If the applied torque cannot be accurately measured, stop tightening when the force required to turn the screw becomes significantly greater than that needed when first tightening. If a screw is tighten ...

  • Renesas H8S/2214 Series - page 14

    2. Next, fasten screws to ② and ④ a little, so that four screw holes are aligned. Then, each screw should be tightened a little at a time, alterna ting between screws on opposing corners. 2 4 Figure 5 Fastening Cable Head Procedure (2) 10 ...

  • Renesas H8S/2214 Series - page 15

    2.2.4 Fastening Cable Body Connect the cable body to the cable head. Figure 6 Fastening Cable Body 11 ...

  • Renesas H8S/2214 Series - page 16

    2.3 Recommended Dimensions for User System Mount Pad Figure 7 shows t he recomm ended dim ensions for the mount pad (footprint) for the user system with an IC socket for an TBP-112 package (CSPACK112A1110H01: socket (manufactured by Toky o Eletech Corporation). Note t hat the dimensions in figure 7 are som ewhat different from those of the actual c ...

  • Renesas H8S/2214 Series - page 17

    2.4 Dimensions for User System Interface Cable Head The dimensions for the user system interf ace cable head are shown in figure 8. Figure 8 Dimensions for User System Interface Cable Head 13 ...

  • Renesas H8S/2214 Series - page 18

    2.5 Resulting Dimensions after Connecting User System Interface Cable The resulting dimensions, after conn ecting the user system interface cab le head to the user system, are shown in figure 9. Figure 9 Resulting Dimensions after Connecting User System Interface Cable 14 ...

  • Renesas H8S/2214 Series - page 19

    15 Section 3 Installing the MCU to the User System CAUTION 1. Check the location of pin 1 before inserting. 2. Use a provided screwdriver. 3. The tightening torque must be 0.054 N•m or less. If the applied torque cannot be accurately measured, stop tightening when the force required to turn the screw becomes significantly greater than that needed ...

  • Renesas H8S/2214 Series - page 20

    Figure 10 Installing MCU to User System 16 ...

  • Renesas H8S/2214 Series - page 21

    Section 4 Verifying Operation 1. When using the E6000 emulator for the H8S/2214 series, turn on the emulator according to the procedures described in the H8S Series E6000 Em ulator User's Manual (HS2000EPI61HE). 2. Verify the user system interface cable connec tions by accessing the exte rnal m emory and ports to check the bus states of the pi ...

  • Renesas H8S/2214 Series - page 22

    Section 5 Notice 1. Make sure that pin 1 on the user syst em IC socket is correct ly aligned with pin 1 on t he cable head before inserting the cable head into the user system IC socket. 2. The dimensi ons of the recommended m ount pad for the user system IC socket are different from those of the MCU. 3. This user system interface cable is specifi ...

Manufacturer Renesas Category Computer Hardware

Documents that we receive from a manufacturer of a Renesas H8S/2214 Series can be divided into several groups. They are, among others:
- Renesas technical drawings
- H8S/2214 Series manuals
- Renesas product data sheets
- information booklets
- or energy labels Renesas H8S/2214 Series
All of them are important, but the most important information from the point of view of use of the device are in the user manual Renesas H8S/2214 Series.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Renesas H8S/2214 Series, service manual, brief instructions and user manuals Renesas H8S/2214 Series. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Renesas H8S/2214 Series.

Similar manuals

A complete manual for the device Renesas H8S/2214 Series, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Renesas H8S/2214 Series by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Renesas H8S/2214 Series.

A complete Renesas manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Renesas H8S/2214 Series - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Renesas H8S/2214 Series, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Renesas H8S/2214 Series, that we can find in the current document
3. Tips how to use the basic functions of the device Renesas H8S/2214 Series - which should help us in our first steps of using Renesas H8S/2214 Series
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Renesas H8S/2214 Series
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Renesas H8S/2214 Series in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Renesas H8S/2214 Series?

Use the form below

If you did not solve your problem by using a manual Renesas H8S/2214 Series, ask a question using the form below. If a user had a similar problem with Renesas H8S/2214 Series it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)