English dropdown-ico

Manual Lincoln Electric SVM199-A

145 pages 10.11 mb
Download

Go to site of 145

Summary
  • Lincoln Electric SVM199-A - page 1

    SVM199-A July , 2010 Safety Depends on Y ou Lincoln arc welding and cutting equipment is designed and built with safety in mind. However , your overall safety can be increased by proper installation . . . and thoughtful operation on your part. DO NOT INST ALL, OPERA TE OR REP AIR THIS EQUIPMENT WITHOUT READ- ING THIS MANUAL AND THE SAFETY PRECAUT ...

  • Lincoln Electric SVM199-A - page 2

    SAFETY i i INVERTEC® V450-PRO FOR ENGINE powered equipment. 1.a. T urn the engine off before troubleshooting and maintenance work unless the maintenance work requires it to be running. ____________________________________________________ 1.b.Operate engines in open, well-ventilated areas or vent the engine exhaust fumes outdoors. _________________ ...

  • Lincoln Electric SVM199-A - page 3

    SAFETY ii ii INVERTEC® V450-PRO FUMES AND GASES can be dangerous. 5.a. Welding may produce fumes and gases hazardous to health. Avoid breathing these fumes and gases.When welding, keep your head out of the fume. Use enough ventilation and/or exhaust at the arc to keep fumes and gases away from the breathing zone. When welding with electrodes which ...

  • Lincoln Electric SVM199-A - page 4

    SAFETY iii iii INVERTEC® V450-PRO FOR ELECTRICALL Y powered equipment. 8.a. Turn off input power using the disconnect switch at the fuse box before working on the equipment. 8.b. Install equipment in accordance with the U.S. National Electrical Code, all local codes and the manufacturer ’s recommendations. 8.c. Ground the equipment in accordance ...

  • Lincoln Electric SVM199-A - page 5

    SAFETY iv iv INVERTEC® V450-PRO PRÉCAUTIONS DE SÛRETÉ Pour votre propre protection lire et observer toutes les instructions et les précautions de sûreté specifiques qui parraissent dans ce manuel aussi bien que les précautions de sûreté générales suiv- antes: Sûreté Pour Soudage A L’Arc 1. Protegez-vous contre la secousse électriqu ...

  • Lincoln Electric SVM199-A - page 6

    SAFETY INVERTEC® V450-PRO Electromagnetic Compatibility (EMC) Conformance Products displaying the CE mark are in conformity with European Community Council Directive of 15 Dec 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility, 2004/108/EC. It was manufactured in conformity with a national standard ...

  • Lincoln Electric SVM199-A - page 7

    SAFETY INVERTEC® V450-PRO Electromagnetic Compatibility (EMC) The size of the surrounding area to be considered will depend on the structure of the building and other activities that are taking place. The surrounding area may extend beyond the boundaries of the premises. Methods of Reducing Emissions Mains Supply Welding equipment should be connec ...

  • Lincoln Electric SVM199-A - page 8

    - MASTER T ABLE OF CONTENTS FOR ALL SECTIONS - I I INVERTEC® V450-PRO Page Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .i-iv Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Lincoln Electric SVM199-A - page 9

    T ABLE OF CONTENTS - INST ALLA TION SECTION A-1 A-1 INVERTEC® V450-PRO Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-1 T echnical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Lincoln Electric SVM199-A - page 10

    INST ALLA TION A-2 A-2 INVERTEC® V450-PRO TECHNICAL SPECIFICA TIONS - INVERTEC® V450-PRO OUTPUT RECOMMENDED INPUT WIRE AND FUSE SIZES FOR MAXIMUM RA TED OUTPUT PHYSICAL DIMENSIONS TEMPERA TURE RANGES INPUT A T RA TED OUTPUT - THREE PHASE ONL Y INPUT VOL TS- FREQUENCY 208/230/460/575V - 60HZ. 200/220/440/575V - 50HZ. INPUT VOL T AGE / FREQUENCY 20 ...

  • Lincoln Electric SVM199-A - page 11

    INST ALLA TION A-3 A-3 INVERTEC® V450-PRO LIFTING Lift the machine by the lift bail only . The lift bail is designed to lift the power source only . Do not attempt to lift the V450-PRO with accessories attached to it. ST ACKING V450-PRO machines can be stacked to a maximum of 3 high. The bottom machine must always be placed on a firm, secure, leve ...

  • Lincoln Electric SVM199-A - page 12

    INST ALLA TION A-4 A-4 INVERTEC® V450-PRO INPUT FUSE AND SUPPL Y WIRE CONSIDERA TIONS Refer to the T echnical Specifications at the beginning of this Installation section for recommended fuse and wire sizes. Fuse the input circuit with the recommend- ed super lag fuse or delay type breakers (also called “inverse time” or “thermal/magnetic” ...

  • Lincoln Electric SVM199-A - page 13

    INST ALLA TION A-5 A-5 INVERTEC® V450-PRO CABLE INDUCT ANCE, AND ITS EFFECTS ON PULSE WELDING For Pulse Welding processes, cable inductance will cause the welding performance to degrade. For the total welding loop length less than 50 ft.( 15.24m), tradi- tional welding cables may be used without any ef fects on welding performance. For the total w ...

  • Lincoln Electric SVM199-A - page 14

    INST ALLA TION A-6 A-6 INVERTEC® V450-PRO CONNECTIONS OF WIRE FEEDERS TO V450-PRO LF-72, 74 Connection Instructions • T urn the Invertec® power switch "off". • Connect the K1797-[ ] control cable from the LF-72, 74 to the 14-pin MS-style connector . • Connect the electrode cable to the output terminal of the polarity required by e ...

  • Lincoln Electric SVM199-A - page 15

    INST ALLA TION A-7 A-7 INVERTEC® V450-PRO LN-742 Connection Instructions • T urn the Invertec® power switch "off" • A K1819-1 Input cable assembly is required to con- nect the LN-742 to the Invertec®. • Connect the control cable from the LN-742 to the 14-pin MS-style connector . • Connect the electrode cable to the output termi ...

  • Lincoln Electric SVM199-A - page 16

    NOTES A-8 A-8 INVERTEC® V450-PRO Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC ...

  • Lincoln Electric SVM199-A - page 17

    T ABLE OF CONTENTS - OPERA TION SECTION B-1 B-1 INVERTEC® V450-PRO Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-1 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Lincoln Electric SVM199-A - page 18

    OPERA TION B-2 B-2 INVERTEC® V450-PRO SAFETY PRECAUTIONS ELECTRIC SHOCK can kill. • Do not touch electrically live parts or electrode with skin or wet clothing. • Insulate yourself from work and ground. • Always wear dry insulating gloves. ------------------------------------------------------------------------ FUMES AND GASES can be dangero ...

  • Lincoln Electric SVM199-A - page 19

    OPERA TION B-3 B-3 INVERTEC® V450-PRO 6. THERMAL • This status light indicates when the power source has been driven into thermal overload. If the output terminals were "ON", the "ON" light will blink indicating that the output will be turned back on once the unit cools down to an accept- able temperature level. If the unit w ...

  • Lincoln Electric SVM199-A - page 20

    OPERA TION B-4 B-4 INVERTEC® V450-PRO • The Arc Control regulates the Arc Force to adjust the short circuit current. The minimum setting (-10) will produce a "soft" arc and will produce minimal spat- ter . The maximum setting (+10) will produce a "crisp" arc and will minimize electrode sticking. TIG GT A W: The TIG mode featu ...

  • Lincoln Electric SVM199-A - page 21

    OPERA TION B-5 B-5 INVERTEC® V450-PRO 8A. WELD MODE SELECT -FOR MACHINES EQUIPPED WITH OPTIONAL ADV ANCED PROCESS P ANEL (See Figure B.2 UPPER AND MIDDLE SECTION) See (WELD MODE DET AILS) in this section. T o program welding modes, the SELECT knob is used to Scroll through all welding modes. The MEMOR Y button is used to store and access welding m ...

  • Lincoln Electric SVM199-A - page 22

    OPERA TION B-6 B-6 INVERTEC® V450-PRO MEMOR Y SELECTIONS: (See Figure B.2 for location of controls) The MEMORY button and SELECT knob are used together to select a welding process and store it in memory (M1 thru M8). The SELECT knob scrolls through the welding process modes and memory M1 thru M8. The MEMOR Y button stores the welding process in me ...

  • Lincoln Electric SVM199-A - page 23

    OPERA TION B-7 B-7 INVERTEC® V450-PRO WELD MODE DET AILS: Mode Range Comments Stick Soft 55 - 570 amps The stick soft mode is the best selection for general stick applications. Arc Control = Arc Force Hot Start = Initial hot start current (min = start a match set amps, Max. = greatest hot start current) During hot start, arc force is set at high a ...

  • Lincoln Electric SVM199-A - page 24

    OPERA TION B-8 B-8 INVERTEC® V450-PRO PULSE PROGRAMS: MODE IPM* .030 Steel 75 - 800 .035 Steel 50 - 800 .045 Steel 60 - 800 .052 Steel 60 - 750 1/16 Steel 60 - 600 .045 Metal Core 60 - 700 .052 Metal Core 60 - 500 1/16 Metal Core 60 - 500 .030 Stainless Ar Blends 100 - 800 .030 Stainless He Ar CO 2 100 - 800 .035 Stainless Ar Blends 70 - 800 .035 ...

  • Lincoln Electric SVM199-A - page 25

    OPERA TION B-9 B-9 INVERTEC® V450-PRO LN-10/DH-10 Wire Feeder Compatibility Note: The LN-10 and DH-10 feeders can be used to pulse weld and in the power mode with the panel. The displays on the LN-10 & DH-10 do not show the wire feed speed or power . 9. SERIAL PORT FOR SOFTW ARE UPDA TES 10. HOT ST ART and ARC CONTROL features have different f ...

  • Lincoln Electric SVM199-A - page 26

    OPERA TION B-10 B-10 INVERTEC® V450-PRO T ypes of Remote WELD TERMINAL Control • The Invertec® V450-Pro’s Weld T erminals can be controlled from each of the MS-style connectors. The circuit has a nominal OCV of 15VDC and requires a dry contact closure (less than 100 ohms) to activate the output of the Invertec® V450-Pro. • 14-Pin MS-style ...

  • Lincoln Electric SVM199-A - page 27

    T ABLE OF CONTENTS - ACCESSORIES SECTION C-1 C-1 INVERTEC® V450-PRO Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-1 Options/Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Lincoln Electric SVM199-A - page 28

    ACCESSORIES C-2 C-2 INVERTEC® V450-PRO OPTIONS / ACCESSORIES K857 Remote Output Control K814 Arc Start Switch K812 Hand Operated Amptrol K870 Foot Operated Amptrol NOTE: All of the above remote controls connect direct- ly to the 6-pin MS-style connector , with either a K864 or K876 adapter and connect it to the 14 pin wire feed- er MS-style connec ...

  • Lincoln Electric SVM199-A - page 29

    T ABLE OF CONTENTS - MAINTENANCE SECTION D-1 D-1 INVERTEC® V450-PRO Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D-1 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Lincoln Electric SVM199-A - page 30

    MAINTENANCE D-2 D-2 INVERTEC® V450-PRO VISUAL INSPECTION Clean interior of machine with a low-pressure air stream. Make a thorough inspection of all compo- nents. Look for signs of overheating, broken leads or other obvious problems. Many problems can be uncovered with a good visual inspection. ROUTINE MAINTENANCE 1. Every 6 months or so, the mach ...

  • Lincoln Electric SVM199-A - page 31

    MAINTENANCE D-3 D-3 INVERTEC® V450-PRO 1. Case Front Assembly 2. Control Box & Horizontal Plate 3. Base, Lift Bale & Fan Assembly 4. Input Assembly 5. T ransformer & Output Assembly 6. Switch Board Heatsink Assembly 7. Covers Assembly Figure D.1 - Major Component Location 5 5 1 1 7 7 4 4 3 3 6 6 2 2 5 5 1 1 7 7 4 4 3 3 6 6 2 2 Return t ...

  • Lincoln Electric SVM199-A - page 32

    NOTES D-4 D-4 INVERTEC® V450-PRO Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC ...

  • Lincoln Electric SVM199-A - page 33

    T ABLE OF CONTENTS-THEOR Y OF OPERA TION SECTION E-1 E-1 INVERTEC® V450-PRO Theory of Operation ................................................................................................................................. Section E Block Logic Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Lincoln Electric SVM199-A - page 34

    THEOR Y OF OPERA TION E-2 E-2 INVERTEC® V450-PRO POWER  SOURCE GENERAL DESCRIPTION The INVERTEC® V450-PRO is an inverter based welding power source that is designed to be a multi- process welding system. It is a high performance, dig- itally controlled inverter capable of complex, high- speed waveform control. With the appropriate modu- lar com ...

  • Lincoln Electric SVM199-A - page 35

    THEOR Y OF OPERA TION SWITCH BOARDS AND MAIN TRANSFORMER There are two switch boards in the INVERTEC® V450- PRO, each containing an input capacitor and insulated gate bipolar transistor (IGBT) switching circuitry . Refer to Figure E.3. When the machine reconnect switches are configured for a lower input voltage (below 300 V AC) the input capacitor ...

  • Lincoln Electric SVM199-A - page 36

    THEOR Y OF OPERA TION E-4 E-4 INVERTEC® V450-PRO CONTROL BOARD & MODE SELECTION The control board performs the primary interfacing functions to establish and maintain output control of the INVERTEC® V450-PRO. Refer to Figure E.4. The control board sends and receives digital command information through the wire feeder receptacle and or the RS2 ...

  • Lincoln Electric SVM199-A - page 37

    THEOR Y OF OPERA TION E-5 E-5 INVERTEC® V450-PRO OUTPUT RECTIFIER AND CHOKE The output rectifier receives the AC output from the main transformer secondary and rectifies it to a DC voltage level. Since the output choke is in series with the negative leg of the output rectifier and also in series with the welding load, a filtered DC output is appli ...

  • Lincoln Electric SVM199-A - page 38

    THEOR Y OF OPERA TION E-6 E-6 INVERTEC® V450-PRO THERMAL PROTECTION T wo normally closed (NC) thermostats protect the machine from excessive operating temperatures. These thermostats are wired in series and are con- nected to the control board. One of the thermostats is located on the heat sink of the output rectifier and the other is located near ...

  • Lincoln Electric SVM199-A - page 39

    THEOR Y OF OPERA TION E-7 E-7 INVERTEC® V450-PRO INSULA TED GA TE BIPOLAR TRANSIST OR (IGBT) OPERA TION An IGBT is a type of transistor . IGBT are semiconduc- tors well suited for high frequency switching and high current applications. Example A in Figure E.6 shows an IGBT in passive mode. There is no gate signal, zero volts relative to the source ...

  • Lincoln Electric SVM199-A - page 40

    THEOR Y OF OPERA TION E-8 E-8 INVERTEC® V450-PRO PULSE WIDTH MODULA TION The term Pulse Width Modulation is used to describe how much time is devoted to conduction in the positive and negative portions of the cycle. Changing the pulse width is known as modulation. Pulse Width Modulation (PWM) is the varying of the pulse width over the allowed rang ...

  • Lincoln Electric SVM199-A - page 41

    T ABLE OF CONTENTS - TROUBLESHOOTING AND REP AIR F-1 F-1 INVERTEC® V450-PRO T roubleshooting and Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F-1 How to Use T roubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Lincoln Electric SVM199-A - page 42

    TROUBLESHOOTING AND REP AIR F-2 F-2 INVERTEC® V450-PRO This T roubleshooting Guide is provided to help you locate and repair possible machine malfunctions. Simply follow the three-step procedure listed below . Step 1. LOCA TE PROBLEM (SYMPTOM). Look under the column labeled “PROBLEM (SYMPTOMS)”. This column describes pos- sible symptoms that ...

  • Lincoln Electric SVM199-A - page 43

    TROUBLESHOOTING AND REP AIR F-3 F-3 INVERTEC® V450-PRO Sometimes machine failures appear to be due to PC board failures. These problems can sometimes be traced to poor electrical connections. T o avoid prob- lems when troubleshooting and replacing PC boards, please use the following procedure: 1. Determine to the best of your technical ability tha ...

  • Lincoln Electric SVM199-A - page 44

    OUTPUT PROBLEMS Observe Safety Guidelines detailed in the beginning of this manual. PROBLEMS (SYMPTOMS) POSSIBLE AREAS OF MISADJUSTMENT(S) RECOMMENDED COURSE OF ACTION If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely , contact the Lincoln Electric Service Department for technical troubles ...

  • Lincoln Electric SVM199-A - page 45

    OUTPUT PROBLEMS Observe Safety Guidelines detailed in the beginning of this manual. PROBLEMS (SYMPTOMS) POSSIBLE AREAS OF MISADJUSTMENT(S) RECOMMENDED COURSE OF ACTION If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely , contact the Lincoln Electric Service Department for technical troubles ...

  • Lincoln Electric SVM199-A - page 46

    OUTPUT PROBLEMS Observe Safety Guidelines detailed in the beginning of this manual. PROBLEMS (SYMPTOMS) POSSIBLE AREAS OF MISADJUSTMENT(S) RECOMMENDED COURSE OF ACTION If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely , contact the Lincoln Electric Service Department for technical troubles ...

  • Lincoln Electric SVM199-A - page 47

    OUTPUT PROBLEMS Observe Safety Guidelines detailed in the beginning of this manual. PROBLEMS (SYMPTOMS) POSSIBLE AREAS OF MISADJUSTMENT(S) RECOMMENDED COURSE OF ACTION If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely , contact the Lincoln Electric Service Department for technical troubles ...

  • Lincoln Electric SVM199-A - page 48

    Observe Safety Guidelines detailed in the beginning of this manual. PROBLEMS (SYMPTOMS) POSSIBLE AREAS OF MISADJUSTMENT(S) RECOMMENDED COURSE OF ACTION If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely , contact the Lincoln Electric Service Department for technical troubleshooting assistan ...

  • Lincoln Electric SVM199-A - page 49

    Observe Safety Guidelines detailed in the beginning of this manual. PROBLEMS (SYMPTOMS) POSSIBLE AREAS OF MISADJUSTMENT(S) RECOMMENDED COURSE OF ACTION If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely , contact the Lincoln Electric Service Department for technical troubleshooting assistan ...

  • Lincoln Electric SVM199-A - page 50

    Observe Safety Guidelines detailed in the beginning of this manual. If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely , contact the Lincoln Electric Service Department for technical troubleshooting assistance before you proceed. Call 1-888-935-3877. CAUTION TROUBLESHOOTING AND REP AIR F-10 ...

  • Lincoln Electric SVM199-A - page 51

    If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely , contact the Lincoln Electric Service Department for technical troubleshooting assistance before you proceed. Call 1-888-935-3877. CAUTION TROUBLESHOOTING AND REP AIR F-11 F-11 INVERTEC® V450-PRO Observe Safety Guidelines detailed in the ...

  • Lincoln Electric SVM199-A - page 52

    NOTES F-12 F-12 INVERTEC® V450-PRO Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC ...

  • Lincoln Electric SVM199-A - page 53

    Service and repair should only be performed by Lincoln Electric factory trained personnel. Unauthorized repairs performed on this equipment may result in danger to the technician or machine operator and will invalidate your factory warranty . For your safety and to avoid electrical shock, please observe all safety notes and precautions detailed thr ...

  • Lincoln Electric SVM199-A - page 54

    CAPACITOR TERMINALS RESISTOR CAPACITOR TERMINALS RESISTOR CA PA CI TO R TE RM IN AL S RESISTOR CA PA CI TO R TE RM IN AL S RESISTOR FIGURE F .1 – CAP ACITOR TERMINAL LOCA TION INPUT FIL TER CAP ACIT OR DISCHARGE PROCEDURE (continued) PROCEDURE 1. Remove input power to the INVERTEC® V450- PRO. 2. Using the 3/8” nut driver , remove the left and ...

  • Lincoln Electric SVM199-A - page 55

    Service and repair should only be performed by Lincoln Electric factory trained personnel. Unauthorized repairs performed on this equipment may result in danger to the technician or machine operator and will invalidate your factory warranty . For your safety and to avoid electrical shock, please observe all safety notes and precautions detailed thr ...

  • Lincoln Electric SVM199-A - page 56

    VOL T AGE AND CURRENT CALIBRA TION PROCEDURE (continued) CALIBRA TION CHECK The calibration of the V450-PRO can be checked using a resistive load bank with the V450-PRO in mode 200. Mode 200 is a constant current test mode. NOTE: Before attempting to calibrate the voltage or current setting of the V450-PRO, be sure to read the entire voltage or cur ...

  • Lincoln Electric SVM199-A - page 57

    VOL T AGE AND CURRENT CALIBRA TION PROCEDURE (continued) CURRENT CALIBRA TION PROCEDURE NOTE: If the Mode SELECT/MEMOR Y button is not pressed within 30 seconds after adjusting the Output Control knob the machine will leave the calibration mode and use the previous calibration settings. 1. Connect the resistive load band (approximate- ly .087 ohms) ...

  • Lincoln Electric SVM199-A - page 58

    NOTES F-18 F-18 INVERTEC® V450-PRO Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC ...

  • Lincoln Electric SVM199-A - page 59

    Service and repair should only be performed by Lincoln Electric factory trained personnel. Unauthorized repairs performed on this equipment may result in danger to the technician or machine operator and will invalidate your factory warranty . For your safety and to avoid electrical shock, please observe all safety notes and precautions detailed thr ...

  • Lincoln Electric SVM199-A - page 60

    CAPACITOR TERMINALS RESISTOR CAPACITOR TERMINALS RESISTOR CA PA CI TO R TE RM IN AL S RESISTOR CA PA CI TO R TE RM IN AL S RESISTOR FIGURE F .2 - CAP ACITOR TERMINAL LOCA TIONS MAIN SWITCH BOARD TEST PROCEDURE (continued) TEST PROCEDURE 1. Remove input power to the INVERTEC® V450-PRO. 2. Perform the Capacitor Discharge Procedure. 3. Use a DC voltm ...

  • Lincoln Electric SVM199-A - page 61

    Service and repair should only be performed by Lincoln Electric factory trained personnel. Unauthorized repairs performed on this equipment may result in danger to the technician or machine operator and will invalidate your factory warranty . For your safety and to avoid electrical shock, please observe all safety notes and precautions detailed thr ...

  • Lincoln Electric SVM199-A - page 62

    FIGURE F .3 - INPUT RECTIFIER INPUT RECTIFIER TEST PROCEDURE (continued) PROCEDURE 1. Remove input power to the INVERTEC® V450-PRO. 2. Using the 3/8” nut driver , remove the case top. 3. Perform the Capacitor Discharge Procedure. 4. Locate the Input Rectifier and lead locations. Refer to Figure F .3. NOTE: Some RTV sealant may have to be removed ...

  • Lincoln Electric SVM199-A - page 63

    INPUT RECTIFIER TEST PROCEDURE (continued) 6. Use the analog ohmmeter to perform the tests detailed in T able F .1. 7. If the input rectifier does not meet the accept- able readings outlined in the table, the compo- nent may be faulty . Replace. NOTE: Before replacing the input rectifier , perform the Switch Board Test and the Input Contactor T est ...

  • Lincoln Electric SVM199-A - page 64

    NOTES F-24 F-24 INVERTEC® V450-PRO Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC ...

  • Lincoln Electric SVM199-A - page 65

    Service and repair should only be performed by Lincoln Electric factory trained personnel. Unauthorized repairs performed on this equipment may result in danger to the technician or machine operator and will invalidate your factory warranty . For your safety and to avoid electrical shock, please observe all safety notes and precautions detailed thr ...

  • Lincoln Electric SVM199-A - page 66

    INPUT CONT ACTOR TEST PROCEDURE (continued) PROCEDURE 1. Remove input power to the INVERTEC® V450-PRO. 2. Using the 3/8” nut driver , remove the input access panel and case top. 3. Locate, mark, and remove the two leads (601, X4) that are connected to the input contactor coil. See Figure F .4. 4. Using the external 24 V AC supply , apply 24 V AC ...

  • Lincoln Electric SVM199-A - page 67

    INPUT CONT ACTOR TEST PROCEDURE (continued) 5. With the input contactor activated, check the continuity across the three sets of contacts. (Zero ohms or very low resistance is normal.) See Figure F .5. If the resistance is high, the input contactor is faulty . Replace the input con- tactor . 6. When the contactor is NOT activated, the resis- tance ...

  • Lincoln Electric SVM199-A - page 68

    NOTES F-28 F-28 INVERTEC® V450-PRO Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC ...

  • Lincoln Electric SVM199-A - page 69

    Service and repair should only be performed by Lincoln Electric factory trained personnel. Unauthorized repairs performed on this equipment may result in danger to the technician or machine operator and will invalidate your factory warranty . For your safety and to avoid electrical shock, please observe all safety notes and precautions detailed thr ...

  • Lincoln Electric SVM199-A - page 70

    INPUT BOARD TEST PROCEDURE (continued) TROUBLESHOOTING AND REP AIR F-30 F-30 INVERTEC® V450-PRO INPUT CONTACTOR 601 X4 J 60 J61 6 7 8 9 10 J61 1 2 3 4 5 6 7 8 1 2 3 4 5 J60 INPUT CONT ACTOR 601 X4 J 60 J61 6 7 8 9 10 J61 1 2 3 4 5 6 7 8 1 2 3 4 5 J60 FIGURE F .6 – INPUT CONT ACTOR CR1 PROCEDURE 1. Remove input power to the INVERTEC® 450-PRO. 2. ...

  • Lincoln Electric SVM199-A - page 71

    INPUT BOARD TEST PROCEDURE (continued) TROUBLESHOOTING AND REP AIR F-31 F-31 INVERTEC® V450-PRO 6. Remove input power to the INVERTEC® V - 450 PRO. If any of the voltages are low or not present, perform the Input Contactor T est . If that checks out, the Input Board may by faulty . 7. Reconnect lead X4 to the main input contac- tor CR1 coil termi ...

  • Lincoln Electric SVM199-A - page 72

    INPUT BOARD TEST PROCEDURE (continued) TROUBLESHOOTING AND REP AIR F-32 F-32 INVERTEC® V450-PRO T ABLE F .2 – INPUT BOARD VOL T AGE CHECKS TEST POINTS PLUG J61 PIN 8 (H1D) TO PLUG J61 PIN 2 (612) PLUG J61 PIN 10 (T3) TO PLUG J61 PIN 2 (T1) PLUG J60 PIN 3 (238) TO PLUG J60 PIN 4 (604) PLUG J60 PIN 3 (238) TO PLUG J60 PIN 5 (232) LEAD NUMBERS J61 ...

  • Lincoln Electric SVM199-A - page 73

    Service and repair should only be performed by Lincoln Electric factory trained personnel. Unauthorized repairs performed on this equipment may result in danger to the technician or machine operator and will invalidate your factory warranty . For your safety and to avoid electrical shock, please observe all safety notes and precautions detailed thr ...

  • Lincoln Electric SVM199-A - page 74

    TRANSFORMER #2 3/8” MOUNTING SCREWS (2) P51 P52 P50 TRANSFORMER #2 3/8” MOUNTING SCREWS (2) P51 P52 P50 FIGURE F .7 – PLUGS P52 AND P54 AUXILIAR Y TRANSFORMER NO. 2 TEST (continued) TROUBLESHOOTING AND REP AIR F-34 F-34 INVERTEC® V450-PRO PROCEDURE 1. Remove the main input supply power to the INVERTEC® V -450 PRO. 2. Remove any load that ma ...

  • Lincoln Electric SVM199-A - page 75

    Service and repair should only be performed by Lincoln Electric factory trained personnel. Unauthorized repairs performed on this equipment may result in danger to the technician or machine operator and will invalidate your factory warranty . For your safety and to avoid electrical shock, please observe all safety notes and precautions detailed thr ...

  • Lincoln Electric SVM199-A - page 76

    TRANSFORMER #1 3 /8” MOUNTING SCREWS (2) PLUG P59 TRANSFORMER #1 3 /8” MOUNTING SCREWS (2) PLUG P59 FIGURE F .8 – TEST LEAD LOCA TIONS AUXILIAR Y TRANSFORMER NO. 1 TEST (continued) PROCEDURE 1. Remove the main input supply power to the INVERTEC® V450-PRO. 2. Using the 3/8 in. nut driver , remove the case sides and top. 3. Perform the Capacit ...

  • Lincoln Electric SVM199-A - page 77

    T ABLE F .3 AUXILIAR Y TRANSFORMER NO. 1 TEST (continued) TROUBLESHOOTING AND REP AIR F-37 F-37 INVERTEC® V450-PRO NORMAL EXPECTED LEAD IDENTIFICA TION VOL T AGE X8 to 41B 28 V AC X 3 t o X 5 1 15 V A C X3 to X4 24 V AC X 6 t o X 7 2 4 V AC X 6 t o X 9 4 2 V AC Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC ...

  • Lincoln Electric SVM199-A - page 78

    NOTES F-38 F-38 INVERTEC® V450-PRO Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC ...

  • Lincoln Electric SVM199-A - page 79

    Service and repair should only be performed by Lincoln Electric factory trained personnel. Unauthorized repairs performed on this equipment may result in danger to the technician or machine operator and will invalidate your factory warranty . For your safety and to avoid electrical shock, please observe all safety notes and precautions detailed thr ...

  • Lincoln Electric SVM199-A - page 80

    J42 J41 J43 4 5 6 3 4 7 8 9 10 11 12 J42 J41 J43 1 2 3 1 2 1 2 3 4 5 6 J42 J41 J43 4 5 6 3 4 7 8 9 10 1 1 12 J42 J41 J43 1 2 3 1 2 1 2 3 4 5 6 POWER BOARD TEST (continued) TROUBLESHOOTING AND REP AIR F-40 F-40 INVERTEC® V450-PRO PROCEDURE 1. Remove input power to the INVERTEC® V -450 PRO. 2. Using the 3/8” nut driver , remove the case top. 3. P ...

  • Lincoln Electric SVM199-A - page 81

    POWER BOARD TEST (continued) TROUBLESHOOTING AND REP AIR F-41 F-41 INVERTEC® V450-PRO P O W E R B O A R D C O N N E C T O R P L U G J 4 1 P O W E R B O A R D C O N N E C T O R P L U G J 4 2 P O W E R B O A R D C O N N E C T O R P L U G J 4 2 P O W E R B O A R D C O N N E C T O R P L U G J 4 2 P O W E R B O A R D C O N N E C T O R P L U G J 4 3 P O ...

  • Lincoln Electric SVM199-A - page 82

    NOTES F-42 F-42 INVERTEC® V450-PRO Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC ...

  • Lincoln Electric SVM199-A - page 83

    Service and repair should only be performed by Lincoln Electric factory trained personnel. Unauthorized repairs performed on this equipment may result in danger to the technician or machine operator and will invalidate your factory warranty . For your safety and to avoid electrical shock, please observe all safety notes and precautions detailed thr ...

  • Lincoln Electric SVM199-A - page 84

    CURRENT TRANSDUCER TEST (continued) TROUBLESHOOTING AND REP AIR F-44 F-44 INVERTEC® V450-PRO J8 216 211 212 213 P91 CURRENT TRANSDUCER 1234 CONTROL BOARD J8 5 6 7 8 1 2 3 4 J8 216 21 1 212 213 P91 CURRENT TRANSDUCER 1234 CONTROL BO ARD J8 5 6 7 8 1 2 3 4 FIGURE F .10 – CURRENT TRANSDUCER TEST TEST PROCEDURE 1. Remove input power to the V -450 PR ...

  • Lincoln Electric SVM199-A - page 85

    CURRENT TRANSDUCER TEST (continued) TROUBLESHOOTING AND REP AIR F-45 F-45 INVERTEC® V450-PRO 5. Turn on the V -450 PRO. Check for the correct DC supply voltage to the current transducer at plug J8. See Figure F .10. A. Pin 2 (lead 212+) to pin 6 (lead 216-) should read +15 VDC. B. Pin 3 (lead 213-) to pin 6 (lead 216+) should read -15 VDC. If the ...

  • Lincoln Electric SVM199-A - page 86

    NOTES F-46 F-46 INVERTEC® V450-PRO Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC ...

  • Lincoln Electric SVM199-A - page 87

    Service and repair should only be performed by Lincoln Electric factory trained personnel. Unauthorized repairs performed on this equipment may result in danger to the technician or machine operator and will invalidate your factory warranty . For your safety and to avoid electrical shock, please observe all safety notes and precautions detailed thr ...

  • Lincoln Electric SVM199-A - page 88

    THERMOST A T TEST – THERMAL PROTECTION (continued) TROUBLESHOOTING AND REP AIR F-48 F-48 INVERTEC® V450-PRO FIGURE F .1 1 – THERMOST A T CIRCUIT NOTE: Never run the V -450 PRO under load when any of the thermostats are bypassed. This is only a means of isolating the inoperative or open thermostat. 1 . T emporarily bypass thermostat circuits wi ...

  • Lincoln Electric SVM199-A - page 89

    Service and repair should only be performed by Lincoln Electric factory trained personnel. Unauthorized repairs performed on this equipment may result in danger to the technician or machine operator and will invalidate your factory warranty . For your safety and to avoid electrical shock, please observe all safety notes and precautions detailed thr ...

  • Lincoln Electric SVM199-A - page 90

    F AN CONTROL AND MOTOR TEST (continued) TROUBLESHOOTING AND REP AIR F-50 F-50 INVERTEC® V450-PRO TEST PROCEDURE 1. Remove the input power to the V450-PRO machine. 2. Using the 3/8” nut driver , remove the case top and control box cover . 3. Perform the Capacitor Dischar ge Pr ocedure. 4. Carefully apply the correct input power to the machine. 5. ...

  • Lincoln Electric SVM199-A - page 91

    Service and repair should only be performed by Lincoln Electric factory trained personnel. Unauthorized repairs performed on this equipment may result in danger to the technician or machine operator and will invalidate your factory warranty . For your safety and to avoid electrical shock, please observe all safety notes and precautions detailed thr ...

  • Lincoln Electric SVM199-A - page 92

    OUTPUT OUTPUT MPS MPS A A OLTS O LTS V V REMOTE REMOTE LOCAL LOCAL CONTROL CONTROL SELECT SELECT SOFT CRIP HI-FREQ TIG TOUCH START TIG POSITIVE (+) OUTPUT TERMINAL NEGATIVE (-) OUTPUT TERMINAL OUTPUT OUTPUT M PS MPS A A OL TS O LT S V V R EMOTE REMOTE L OCAL LOCAL CONTROL CONTROL SELECT SELECT SOFT CRIP HI-FREQ T IG T OUCH START TIG POSITIVE (+) OU ...

  • Lincoln Electric SVM199-A - page 93

    Service and repair should only be performed by Lincoln Electric factory trained personnel. Unauthorized repairs performed on this equipment may result in danger to the technician or machine operator and will invalidate your factory warranty . For your safety and to avoid electrical shock, please observe all safety notes and precautions detailed thr ...

  • Lincoln Electric SVM199-A - page 94

    CHOKE/IRON CHOKE/IRON FIGURE F .14 – CHOKE ASSEMBL Y CHOKE TEST PROCEDURE (continued) PROCEDURE 1 . Using an Ohmmeter , make sure that the choke windings are not grounded to the lamination (> 1megohm). TROUBLESHOOTING AND REP AIR F-54 F-54 INVERTEC® V450-PRO No windings or terminal connections should look burned or over-heated. AC welding may ...

  • Lincoln Electric SVM199-A - page 95

    TROUBLESHOOTING AND REP AIR F-55 F-55 INVERTEC® V450-PRO CONTROL BOARD CHECK 1. Check the LED’s on the Control Board. Compare the pattern to Page 3 of the Machine Schematic . Normal operation will show 8 Green LED’s ON and both Red LED’s OFF . Green LED’s 1 through 8 indicate the pres- ence of the various DC supplies to the Board. LED 7 (r ...

  • Lincoln Electric SVM199-A - page 96

    NOTES F-56 F-56 INVERTEC® V450-PRO Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC ...

  • Lincoln Electric SVM199-A - page 97

    Service and repair should only be performed by Lincoln Electric factory trained personnel. Unauthorized repairs performed on this equipment may result in danger to the technician or machine operator and will invalidate your factory warranty . For your safety and to avoid electrical shock, please observe all safety notes and precautions detailed thr ...

  • Lincoln Electric SVM199-A - page 98

    J33 J3 3 FIGURE F .15 - Plug J33 SPI CABLE RESIST ANCE AND VOL T AGE TEST PROCEDURE (continued) TEST PROCEDURE 1. Remove the input power to the V450-PRO. 2. Using the #2 Phillips screwdriver , remove the case front panel. 5. Locate and remove plug J33 from the control board. See Figure F .15. 6. Check the resistance and continuity of the SPI cable ...

  • Lincoln Electric SVM199-A - page 99

    Service and repair should only be performed by Lincoln Electric factory trained personnel. Unauthorized repairs performed on this equipment may result in danger to the technician or machine operator and will invalidate your factory warranty . For your safety and to avoid electrical shock, please observe all safety notes and precautions detailed thr ...

  • Lincoln Electric SVM199-A - page 100

    POWER BOARD CONTROL BOARD COMPARTMENT COVER POWER BOARD CONTROL BOARD COMP ARTMENT COVER FIGURE F .16 – BOARD LOCTION CONTROL OR POWER BOARD REMOV AL AND REPLACEMENT PROCEDURE (continued) REMOV AL PROCEDURE 1. Remove input power to the V450-PRO. 2. Remove the case top, sides and front. 3. Perform the Capacitor Discharge Procedure. 4. Observe all ...

  • Lincoln Electric SVM199-A - page 101

    CONTROL OR POWER BOARD REMOV AL AND REPLACEMENT PROCEDURE (continued) INST ALLA TION PROCEDURE 1. Install either the power or control board to the PC board assembly and secure it in place. 2. Carefully slide the power and control PC board assembly into place, making sure to clear the lead harnesses on the right and left side of the PC board compart ...

  • Lincoln Electric SVM199-A - page 102

    NOTES F-62 F-62 INVERTEC® V450-PRO Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC ...

  • Lincoln Electric SVM199-A - page 103

    Service and repair should only be performed by Lincoln Electric factory trained personnel. Unauthorized repairs performed on this equipment may result in danger to the technician or machine operator and will invalidate your factory warranty . For your safety and to avoid electrical shock, please observe all safety notes and precautions detailed thr ...

  • Lincoln Electric SVM199-A - page 104

    FIGURE F .17 – INPUT RECTIFIER LOCA TION INPUT RECTIFIER REMOV AL AND REPLACEMENT PROCEDURE (continued) REMOV AL PROCEDURE 1. Remove input power to the V450-PRO. 2. Using the 3/8” nut driver , remove the case top, input access panel and sides. 3. Perform the Capacitor Discharge Procedure. 4. Locate and remove the RTV sealant from the input rect ...

  • Lincoln Electric SVM199-A - page 105

    Service and repair should only be performed by Lincoln Electric factory trained personnel. Unauthorized repairs performed on this equipment may result in danger to the technician or machine operator and will invalidate your factory warranty . For your safety and to avoid electrical shock, please observe all safety notes and precautions detailed thr ...

  • Lincoln Electric SVM199-A - page 106

    INPUT CONTACTOR 601 X4 INPUT CONT ACTOR 601 X4 FIGURE F .18 – INPUT CONT ACTOR LOCA TION INPUT CONT ACTOR REMOV AL AND REPLACEMENT PROCEDURE (continued) REMOV AL PROCEDURE 1. Remove input power to the V450-PRO. 2. Using the 3/8” nut driver , remove the case top, and input access panel. 3. Perform the Capacitor Discharge Procedure. 4. Locate the ...

  • Lincoln Electric SVM199-A - page 107

    Service and repair should only be performed by Lincoln Electric factory trained personnel. Unauthorized repairs performed on this equipment may result in danger to the technician or machine operator and will invalidate your factory warranty . For your safety and to avoid electrical shock, please observe all safety notes and precautions detailed thr ...

  • Lincoln Electric SVM199-A - page 108

    TRANSFORMER #2 3/8” MOUNTING SCREWS (2) P51 P52 P50 TRANSFORMER #2 3/8” MOUNTING SCREWS (2) P51 P52 P50 FIGURE F .19 – TRANSFORMER AND PLUG LOCA TIONS AUXILIAR Y TRANSFORMER NO. 2 REMOV AL AND REPLACEMENT PROCEDURE (continued) REMOV AL PROCEDURE 1. Remove input power to the V450-PRO. 2. Using the 3/8” nut driver , remove the case top, input ...

  • Lincoln Electric SVM199-A - page 109

    AUXILIAR Y TRANSFORMER NO. 2 REMOV AL AND REPLACEMENT PROCEDURE (continued) REPLACEMENT PROCEDURE 1. Carefully place the transformer into the V450- PRO. 2. Install the two mounting screws that hold the transformer to the machine base using the 3/8” nut driver . 3. Connect plugs P50, P51 and P52. 4. Connect any leads and install cable ties as nec- ...

  • Lincoln Electric SVM199-A - page 110

    NOTES F-70 F-70 INVERTEC® V450-PRO Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC ...

  • Lincoln Electric SVM199-A - page 111

    Service and repair should only be performed by Lincoln Electric factory trained personnel. Unauthorized repairs performed on this equipment may result in danger to the technician or machine operator and will invalidate your factory warranty . For your safety and to avoid electrical shock, please observe all safety notes and precautions detailed thr ...

  • Lincoln Electric SVM199-A - page 112

    FIGURE F .20 – DOOR REMOV AL AUXILIAR Y TRANSFORMER NO. 1 REMOV AL AND REPLACEMENT PROCEDURE (continued) REMOV AL PROCEDURE 1. Remove input power to the V450-PRO. 2. Using the 3/8” nut driver , remove the case top, and input access panel. 3. Perform the Capacitor Discharge Procedure. 4. Using the 3/8” nut driver , remove the case back. 5. Rem ...

  • Lincoln Electric SVM199-A - page 113

    AUXILIAR Y TRANSFORMER NO. 1 REMOV AL AND REPLACEMENT PROCEDURE (continued) 8. Cut any necessary cable ties and clear the leads. 9. Using the 3/8” nut driver , remove the two mounting screws that hold the transformer to the fan baffle and the machine base. 10. Carefully remove the transformer from the V450-PRO. REPLACEMENT PROCEDURE 1. Carefully ...

  • Lincoln Electric SVM199-A - page 114

    NOTES F-74 F-74 INVERTEC® V450-PRO Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC ...

  • Lincoln Electric SVM199-A - page 115

    Service and repair should only be performed by Lincoln Electric factory trained personnel. Unauthorized repairs performed on this equipment may result in danger to the technician or machine operator and will invalidate your factory warranty . For your safety and to avoid electrical shock, please observe all safety notes and precautions detailed thr ...

  • Lincoln Electric SVM199-A - page 116

    F r o n t Ti lt s F o r wa rd CONTROL BOARD 3/8” MOUNTING BOLTS (4) DISPLAY BOARD MODE BOARD F r o n t T i l t s F o r w a r d CONTROL BOARD 3/8” MOUNTING BOL TS (4) DISPLA Y BOARD MODE BOARD FIGURE F .21 – BOARD LOCA TIONS CONTROL, REMOTE, MODE OR DISPLA Y PC BOARD REMOV AL AND REPLACEMENT (continued) REMOV AL PROCEDURE 1. Remove input power ...

  • Lincoln Electric SVM199-A - page 117

    Service and repair should only be performed by Lincoln Electric factory trained personnel. Unauthorized repairs performed on this equipment may result in danger to the technician or machine operator and will invalidate your factory warranty . For your safety and to avoid electrical shock, please observe all safety notes and precautions detailed thr ...

  • Lincoln Electric SVM199-A - page 118

    CURRENT TRANSDUCER HEAVY LEAD BOLTED CONNECTION (BEHIND CASE FRONT) 3/8” SCREWS AT BOTTOM OF CASE FRONT (3) CURRENT TRANSDUCER HEA VY LEAD BOL TED CONNECTION (BEHIND CASE FRONT) 3/8” SCREWS A T BOTTOM OF CASE FRONT (3) FIGURE F .22 – CURRENT TRANSDUCER LOCA TION CURRENT TRANSDUCER REMOV AL AND REPLACEMENT PROCEDURE (continued) REMOV AL PROCED ...

  • Lincoln Electric SVM199-A - page 119

    CURRENT TRANSDUCER REMOV AL AND REPLACEMENT PROCEDURE (continued) 9. Using the Phillips head screwdriver , remove the screws and lock washers that hold the transducer to the front panel. 10. Remove the Current Transducer . 1 1. Remove the standoffs from the transducer and save them for reassembly with the new transducer . Note placement upon remova ...

  • Lincoln Electric SVM199-A - page 120

    NOTES F-80 F-80 INVERTEC® V450-PRO Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC ...

  • Lincoln Electric SVM199-A - page 121

    Service and repair should only be performed by Lincoln Electric factory trained personnel. Unauthorized repairs performed on this equipment may result in danger to the technician or machine operator and will invalidate your factory warranty . For your safety and to avoid electrical shock, please observe all safety notes and precautions detailed thr ...

  • Lincoln Electric SVM199-A - page 122

    SWITCH BOARD SWITCH BOARD FIGURE F .23 – SWITCH BOARD LOCA TION SWITCH BOARD AND FIL TER CAP ACITOR REMOV AL AND REPLACEMENT (continued) REMOV AL PROCEDURE NOTE: Observe all static electricity precautions. Lead and plug references below use a slash (/) to indicate machine right side/left side wire number differences. 1. Remove input power to the ...

  • Lincoln Electric SVM199-A - page 123

    SWITCH BOARD AND FIL TER CAP ACITOR REMOV AL AND REPLACEMENT (continued) REPLACEMENT PROCEDURE 1. If the filter capacitor is to be replaced, careful- ly slide the new capacitor into the mounting bracket. Position the capacitor so the correct polarity terminal is lined up with the correct hole on the switch board. 2. All heat sink and IGBT mounting ...

  • Lincoln Electric SVM199-A - page 124

    RETEST AFTER REP AIR TROUBLESHOOTING AND REP AIR F-84 F-84 INVERTEC® V450-PRO Retest a machine: If it is rejected under test for any reason that requires you to remove any part which could affect the machine’s electrical characteristics. OR If you repair or replace any electrical components. INPUT IDLE AMPS AND W A TTS MAXIMUM OUTPUT VOL T AGES ...

  • Lincoln Electric SVM199-A - page 125

    T ABLE OF CONTENTS - DIAGRAM SECTION G-1 G-1 INVERTEC® V450-PRO Electrical Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G-1 Wiring Diagram - Complete Machine - (G4923) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Lincoln Electric SVM199-A - page 126

    ELECTRICAL DIAGRAMS G-2 INVERTEC® V450-PRO WIRING DIAGRAM - COMPLETE MACHINE - (G4923) TM INVERTEC V450-PRO W IRING D IAGRAM TO J 9 202 W ORK 202A TO R 1 TO TP6 223 221 206A 3R 3W 238 RE CT T HE RM 223 222 SEC (BOT TOM LEF T) PO W ER BD REC T IFIER AC 4 CON T RO L BO ARD + TO J 61 C R1 X4 6 TO A UX # 1 503 504 505 506 INPU T 20D 17 18 15 16 F1 F1 ...

  • Lincoln Electric SVM199-A - page 127

    ELECTRICAL DIAGRAMS G-3 INVERTEC® V450-PRO SCHEMA TIC - COMPLETE MACHINE - (G4875 SHEET 1) G4875 INVE RTE C V450-P RO MAC HI N E SC HEM ATIC NONE G4421 DO NO T SC AL E T HIS DR A WING EQ UIP M ENT TYPE: SUBJECT: SCA L E: UF CRM36847 1 PAGE ___ OF ___ 3 E NGI N EE RI NG CO NT RO LLE D MA NU FA CT URE R: No THIS DOCUMENT CONTAINS PROPRIETAR Y INFORM ...

  • Lincoln Electric SVM199-A - page 128

    ELECTRICAL DIAGRAMS G-4 INVERTEC® V450-PRO SCHEMA TIC - COMPLETE MACHINE - (G4875 SHEET 2) G4875 INVE RTE C V450-P RO MAC HI N E SC HEM ATIC NONE G4421 DO NO T SC AL E T HIS DR A WING EQ UIP M ENT TYPE: SUBJECT: SCA L E: UF CRM36847 2 PAGE ___ OF ___ 3 E NGI N EE RI NG CO NT RO LLE D MA NU FA CT URE R: No THIS DOCUMENT CONTAINS PROPRIETAR Y INFORM ...

  • Lincoln Electric SVM199-A - page 129

    ELECTRICAL DIAGRAMS G-5 INVERTEC® V450-PRO SCHEMA TIC - COMPLETE MACHINE - (G4875 SHEET 3) G4875 INVE RTE C V450-P RO MAC HI N E SC HEM ATIC NONE G4421 DO NO T SC AL E T HIS DR A WING EQ UIP M ENT TYPE: SUBJECT: SCA L E: UF CRM36847 3 PAGE ___ OF ___ 3 E NGI N EE RI NG CO NT RO LLE D MA NU FA CT URE R: No THIS DOCUMENT CONTAINS PROPRIETAR Y INFORM ...

  • Lincoln Electric SVM199-A - page 130

    ELECTRICAL DIAGRAMS G-6 INVERTEC® V450-PRO SCHEMA TIC - DIGIT AL CONTROL PC BOARD - (G3789 SHEET 1) G378 9- 2 FO INVERTER WELDER SCHEMATIC DIGITAL CONTROL NO NE G3789-1 E2 FEI . UNLESS OTHERWISE SPECI FIED TOLERANCE M ANUF ACTURING TO L ER ANC E P ER E 2056 O N 2 P LAC E DE CIM AL S I S ± . 02 ON 3 P LA CE DEC IMA LS IS ± .002 O N ALL A NGLE S I ...

  • Lincoln Electric SVM199-A - page 131

    ELECTRICAL DIAGRAMS G-7 INVERTEC® V450-PRO SCHEMA TIC - DIGIT AL CONTROL PC BOARD - (G3789 SHEET 2) G378 9- 2 FO INVERTER WELDER SCHEMATIC DIGITAL CONTROL NO NE G3789-1 E2 FEI . UNLESS OTHERWISE SPECI FIED TOLERANCE M ANUF ACTURING TO L ER ANC E P ER E 2056 O N 2 P LAC E DE CIM AL S I S ± . 02 ON 3 P LA CE DEC IMA LS IS ± .002 O N ALL A NGLE S I ...

  • Lincoln Electric SVM199-A - page 132

    ELECTRICAL DIAGRAMS G-8 INVERTEC® V450-PRO SCHEMA TIC - DIGIT AL CONTROL PC BOARD - (G3789 SHEET 3) G378 9- 2 FO INVERTER WELDER SCHEMATIC DIGITAL CONTROL NO NE G3789-1 E2 FEI . UNLESS OTHERWISE SPECI FIED TOLERANCE M ANUF ACTURING TO L ER ANC E P ER E 2056 O N 2 P LAC E DE CIM AL S I S ± . 02 ON 3 P LA CE DEC IMA LS IS ± .002 O N ALL A NGLE S I ...

  • Lincoln Electric SVM199-A - page 133

    ELECTRICAL DIAGRAMS G-9 INVERTEC® V450-PRO SCHEMA TIC - DIGIT AL CONTROL PC BOARD - (G3789 SHEET 4) G378 9- 2 FO INVERTER WELDER SCHEMATIC DIGITAL CONTROL NO NE G3789-1 E2 FEI . UNLESS OTHERWISE SPECI FIED TOLERANCE M ANUF ACTURING TO L ER ANC E P ER E 2056 O N 2 P LAC E DE CIM AL S I S ± . 02 ON 3 P LA CE DEC IMA LS IS ± .002 O N ALL A NGLE S I ...

  • Lincoln Electric SVM199-A - page 134

    ELECTRICAL DIAGRAMS G-10 INVERTEC® V450-PRO SCHEMA TIC - DIGIT AL POWER SUPPL Y PC BOARD - (G5631) G-10 NOTE: This diagram is for reference only . It may not be accurate for all machines covered by this manual. Return to Section T OC Return to Section T OC Return to Section T OC Return to Section T OC Return to Master T OC Return to Master T OC Re ...

  • Lincoln Electric SVM199-A - page 135

    ELECTRICAL DIAGRAMS G-11 INVERTEC® V450-PRO SCHEMA TIC - INPUT PC BOARD - (M19528) G-11 NOTE: This diagram is for reference only . It may not be accurate for all machines covered by this manual. Return to Section T OC Return to Section T OC Return to Section T OC Return to Section T OC Return to Master T OC Return to Master T OC Return to Master T ...

  • Lincoln Electric SVM199-A - page 136

    NOTE: Lincoln Electric assumes no responsibility for liablilities resulting from board level troubleshooting. PC Board repairs will invalidate your factory warranty . Individual Printed Circuit Board Components are not available from Lincoln Electric. This information is pro- vided for reference only . Lincoln Electric discourages board level troub ...

  • Lincoln Electric SVM199-A - page 137

    ELECTRICAL DIAGRAMS G-13 INVERTEC® V450-PRO SCHEMA TIC - SWITCH PC BOARD - (L1 1385) L11385-2D1 PW - 455 SCHEM ATI C , SW IT CH P CB NO NE - DO N OT S CA LE TH IS D RAW ING EQU IP ME NT TYPE : SU BJ EC T: NA CRM41 517 1 PA GE ___ OF ___ 1 ENGINE ERING CONTROL L ED MANUFACTURER: No T HIS DOC UME N T C ON TAINS P R OP RIETA RY IN FO RMATIO N OW NE D ...

  • Lincoln Electric SVM199-A - page 138

    NOTE: Lincoln Electric assumes no responsibility for liablilities resulting from board level troubleshooting. PC Board repairs will invalidate your factory warranty . Individual Printed Circuit Board Components are not available from Lincoln Electric. This information is pro- vided for reference only . Lincoln Electric discourages board level troub ...

  • Lincoln Electric SVM199-A - page 139

    ELECTRICAL DIAGRAMS G-15 INVERTEC® V450-PRO SCHEMA TIC - SPI / REMOTE CONTROL PC BOARD - (G4017) G-15 NOTE: This diagram is for reference only . It may not be accurate for all machines covered by this manual. Return to Section T OC Return to Section T OC Return to Section T OC Return to Section T OC Return to Master T OC Return to Master T OC Retu ...

  • Lincoln Electric SVM199-A - page 140

    ELECTRICAL DIAGRAMS G-16 INVERTEC® V450-PRO SCHEMA TIC - DISPLA Y PC BOARD - (L1 1 108) G-16 NOTE: This diagram is for reference only . It may not be accurate for all machines covered by this manual. Return to Section T OC Return to Section T OC Return to Section T OC Return to Section T OC Return to Master T OC Return to Master T OC Return to Mas ...

  • Lincoln Electric SVM199-A - page 141

    NOTE: Lincoln Electric assumes no responsibility for liablilities resulting from board level troubleshooting. PC Board repairs will invalidate your factory warranty . Individual Printed Circuit Board Components are not available from Lincoln Electric. This information is pro- vided for reference only . Lincoln Electric discourages board level troub ...

  • Lincoln Electric SVM199-A - page 142

    ELECTRICAL DIAGRAMS G-18 INVERTEC® V450-PRO SCHEMA TIC - LED POTENTIOMETER PC BOARD - (S25258) G-18 NOTE: This diagram is for reference only . It may not be accurate for all machines covered by this manual. Return to Section T OC Return to Section T OC Return to Section T OC Return to Section T OC Return to Master T OC Return to Master T OC Return ...

  • Lincoln Electric SVM199-A - page 143

    NOTE: Lincoln Electric assumes no responsibility for liablilities resulting from board level troubleshooting. PC Board repairs will invalidate your factory warranty . Individual Printed Circuit Board Components are not available from Lincoln Electric. This information is pro- vided for reference only . Lincoln Electric discourages board level troub ...

  • Lincoln Electric SVM199-A - page 144

    ELECTRICAL DIAGRAMS G-20 INVERTEC® V450-PRO SCHEMA TIC - LED SELECT PC BOARD - (S25259) G-20 NOTE: This diagram is for reference only . It may not be accurate for all machines covered by this manual. Return to Section T OC Return to Section T OC Return to Section T OC Return to Section T OC Return to Master T OC Return to Master T OC Return to Mas ...

  • Lincoln Electric SVM199-A - page 145

    NOTE: Lincoln Electric assumes no responsibility for liablilities resulting from board level troubleshooting. PC Board repairs will invalidate your factory warranty . Individual Printed Circuit Board Components are not available from Lincoln Electric. This information is pro- vided for reference only . Lincoln Electric discourages board level troub ...

Manufacturer Lincoln Electric Category Welder

Documents that we receive from a manufacturer of a Lincoln Electric SVM199-A can be divided into several groups. They are, among others:
- Lincoln Electric technical drawings
- SVM199-A manuals
- Lincoln Electric product data sheets
- information booklets
- or energy labels Lincoln Electric SVM199-A
All of them are important, but the most important information from the point of view of use of the device are in the user manual Lincoln Electric SVM199-A.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Lincoln Electric SVM199-A, service manual, brief instructions and user manuals Lincoln Electric SVM199-A. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Lincoln Electric SVM199-A.

Similar manuals

A complete manual for the device Lincoln Electric SVM199-A, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Lincoln Electric SVM199-A by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Lincoln Electric SVM199-A.

A complete Lincoln Electric manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Lincoln Electric SVM199-A - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Lincoln Electric SVM199-A, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Lincoln Electric SVM199-A, that we can find in the current document
3. Tips how to use the basic functions of the device Lincoln Electric SVM199-A - which should help us in our first steps of using Lincoln Electric SVM199-A
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Lincoln Electric SVM199-A
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Lincoln Electric SVM199-A in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Lincoln Electric SVM199-A?

Use the form below

If you did not solve your problem by using a manual Lincoln Electric SVM199-A, ask a question using the form below. If a user had a similar problem with Lincoln Electric SVM199-A it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)