English dropdown-ico

Manual TP-Link TL-WR710N

284 pages 3.83 mb
Download

Go to site of 284

Summary
  • TP-Link TL-WR710N - page 1

    TL-WR710N 150Mbps Wireless N Mini Pocket Router Rev: 1.0.0 1910010795 ...

  • TP-Link TL-WR710N - page 2

    COPYRIGHT & TRADEMARKS S pecifications ar e subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., L TD. Other brands and product names are trademarks or registered trademarks of t heir respective holders. No part of th e specifications ma y be reproduced in any form or by any means or used to make any derivati ...

  • TP-Link TL-WR710N - page 3

    FCC ST A TEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable pr otection against harmful interference in a residential inst allation. This eq uipment generates, uses and can radiate radio frequency energy an d, i ...

  • TP-Link TL-WR710N - page 4

    CE Mark W arning This is a class B product. In a domestic environment , this product may cause radio interference, in which case the user may be required to take adequate measures. Canadian Compliance St atement This device complies with Indus try Canada license-exempt RSS st andard(s). Operation is subject to the following two conditions: (1)This ...

  • TP-Link TL-WR710N - page 5

    第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通行；經發現有干擾現象時，應立 即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信規定作業之無線電信。 低功率 射頻電機需忍受合法通信或工業、科學以及醫療用電波輻射性電機設? ...

  • TP-Link TL-WR710N - page 6

    TP-LINK TECHNOLOGIES CO., L TD TP-LINK TECHNOLOGIES CO., L TD. Building 24 (floors 1, 3, 4, 5), and 28 (floors 1-4) Central Science and T echnology Park, Shennan Rd, Nanshan, Shenzhen, China DECLARA TION OF CONFORMITY For the following equipment: Product Description: 150Mbps Wireless N Mini Pocket Router Model No.: TL-WR710N T rademark: TP-LINK We ...

  • TP-Link TL-WR710N - page 7

    - I - CONTENTS Package Co ntent s............................................................................................................... ................... 1  Chapter 1.  Introduc tion ................................................................................................................... .... 2  1.1  Overview of the ...

  • TP-Link TL-WR710N - page 8

    - II - 4.6.3  LAN ...................................................................................................................... 45  4.7  Wireless ....................................................................................................................... .... 46  4.7.1  Wireless Settings .......................... ...

  • TP-Link TL-WR710N - page 9

    - III - 4.14  Advanced Routing ............................................................................................................ 85  4.14.1  S tatic Routing List ................................................................................................ 85  4.14.2  System Rout ing T able .............................. ...

  • TP-Link TL-WR710N - page 10

    - IV - 5.7.1  Wireless Settings ................................................................................................ 11 2  5.7.2  Wireless Security ................................................................................................ 11 3  5.7.3  Wireless MAC Filtering .......................................... ...

  • TP-Link TL-WR710N - page 11

    - V - 6.6.4  Wireless Advanced ............................................................................................ 146  6.6.5  Wireless S tatistics .............................................................................................. 147  6.7  DHCP .................................................................... ...

  • TP-Link TL-WR710N - page 12

    - VI - 7.8  USB Se ttings .................................................................................................................. 175  7.8.1  S torage Sharing ................................................................................................. 175  7.8.2  Media Se rver ......................................... ...

  • TP-Link TL-WR710N - page 13

    - VII - 8.8.1  S torage Sharing ................................................................................................. 215  8.8.2  Media Se rver ..................................................................................................... 217  8.8.3  User Ac counts................................................... ...

  • TP-Link TL-WR710N - page 14

    - VIII - 8.16.3  Dyndns or g DDNS ............................................................................................. 250  8.17  System T ools .................................................................................................................. 251  8.17.1  T ime Se ttings ...................................... ...

  • TP-Link TL-WR710N - page 15

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 1 - Package Contents The following items should be found in your package: ¾ One TL-WR710N 150Mbps Wireless N Mini Pocket Router ¾ Quick Install ation Guide ¾ One RJ-45 Ethernet Cable ¾ One Resource CD for TL-WR710N 150Mbps Wireless N Mini Pocket Router , including: • User Guide • Other Helpf ...

  • TP-Link TL-WR710N - page 16

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 2 - Chapter 1. Introduction 1.1 Overview of the Router Small enough to fit in the average pocket, the TL-WR710N 150Mbps Wireless N Mini Pocket Router is uniquely suited to provide r obust wirele ss networking to travelers, students, or anyone else for work or play. TL-WR710N supports the newest 802. ...

  • TP-Link TL-WR710N - page 17

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 3 - this user guide. Before installing the Router , please look through this guide to know all the Router ’s functions. 1.2 Conventions T h e Ro ut e r o r T L- W R 7 1 0N m e n ti on e d i n th i s g u id e s t an d s f o r TL - WR 7 10 N 150M bps Wireless N Mini Pocket Router without any explana ...

  • TP-Link TL-WR710N - page 18

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 4 - ¾ LED Statu s Indication Solid Blue The device is working properl y . Blinking Condition 1: System is booting. Condition 2: The Ethernet Cable or USB Device is connecting to the product. T able 1-1 The LED Description ¾ USB: The USB port connect s to a USB storage de vice. ¾ Reset ： It is u ...

  • TP-Link TL-WR710N - page 19

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 5 - Chapter 2. Connecting the Router 2.1 System Requirement s ¾ Each PC in the LAN needs a working Ethernet Adapter ¾ TCP/IP protocol must be inst alled on each PC ¾ Web browser , such as Microsoft Internet Explorer 5.0 or later , Mozilla Firefox, Apple Safari ¾ If the device is configured to Wi ...

  • TP-Link TL-WR710N - page 20

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 6 - 2.3.1 Wireless Router Mode As a wireless router , TL-WR710N enables multi- user to share Internet via DSL/Cable Modem. The default mode of TL-WR710N is Wireless Rout er . On this mode, the wired port LAN/W AN works as W AN, it can be connect ed to DSL Modem or directly c onnected to a wired netw ...

  • TP-Link TL-WR710N - page 21

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 7 - Figure 2-2 Hardware Installation of the TL-WR710N in AP Mode 1. Connect the LAN or LAN/WAN port of TL-WR7 10N to the wired network port with an Ethernet cable. 2. Plug the power plug of TL-WR7 10N in electrical wall socket. 3. Power on the PC(s) and notebook(s). 2.3.3 Repeater Mode TL-WR710N is ...

  • TP-Link TL-WR710N - page 22

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 8 - ) Note: It is recommended that you connect a PC/notebook to the LAN port of the Router with an Ethernet cable, and then login the Router from the PC/notebook to se t the Router in Repeater mode. 2.3.4 Client Mode TL-WR710N is used as a wireless network card to connect the wireless network signal ...

  • TP-Link TL-WR710N - page 23

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 9 - Figure 2-5 Hardware Installation of the TL-WR710N in WISP Client Router Mode 1. Plug the power plug of TL-WR7 10N in electrical wall socket. 2. Power on the notebook(s ). ...

  • TP-Link TL-WR710N - page 24

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 10 - Chapter 3. Quick Installation Guide This chapter will show you how to configure the basic functi ons of your TL-WR710N 150Mbps Wireless N Mini Pocket Router using Quick Setup Wizar d within minutes. 3.1 TCP/IP Configuration The default IP address of the TL-WR710N 15 0Mbps Wireless N Mini Pocket ...

  • TP-Link TL-WR710N - page 25

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 1 1 - 2) Enter the Security key . Click OK . 3) If you can see Connected after the default SSID, you’ve successfully connected to the wireless network. ) Note: 1. The default SSID and Password of your Router are on the labe l. Both are case-sensitive. 2. The pre-encryption function is enabled by d ...

  • TP-Link TL-WR710N - page 26

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 12 - Figure 3-1 Success result of Ping command ¾ If the result displayed is similar to the Figure 3-2, it means the connection between your PC and the Router has failed. Figure 3-2 Failure result of Ping command Please check the connection following these step s: 1. Is the connection bet ween your ...

  • TP-Link TL-WR710N - page 27

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 13 - 3.2 Quick Inst allation Guide With a Web-based utility , it is easy to configure and manage the TL-WR710N 150Mbps Wireless N Mini Pocket Router . The W eb-based utility can be us ed on any Windows, Macintosh or UNIX OS with a W eb browser , such as Microsoft Inte rnet Explorer , Mozilla Firefox ...

  • TP-Link TL-WR710N - page 28

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 14 - Figure 3-5 Quick Setup - W orking Mode ) Note: The Router supports five working modes for multi-user to access the Internet: Wireless Router , Access Point , Repeater , Client and WISP Client Router . In Wireless Router mode, the device enables multiple users to share the Inte rnet connection v ...

  • TP-Link TL-WR710N - page 29

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 15 - The Router supports three popular ways PPPoE , Dynamic IP and Static IP to connect to the Internet. T o make sure the connection type your IS P provides, please refer to the ISP . Make sure the cable is securely plugged in to the W AN port before detection. ¾ Auto Detect - If you don't kn ...

  • TP-Link TL-WR710N - page 30

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 16 - 2. Then, the Wireless page will appear as shown in Figure 3-9 . Set the wireless parameters. It is recommended that you rename an SSID, choos e a Security T ype and enter a Password. Then click Next . Figure 3-9 Quick Setup - Wireless ¾ Wireless Radio - Enable or disable the wireless radi o ch ...

  • TP-Link TL-WR710N - page 31

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 17 - When 11bg mixed mode is selected, only 11bg mixed wireless stations can connect to the Router. It is strongly recommended that you set the Mode to 11bgn mixe d, and all of 802.11b/g/n wireless stations can connect to the Router. ) Note: If 1 1bg mixed mode is selected in the Mode field, the Cha ...

  • TP-Link TL-WR710N - page 32

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 18 - Figure 3-1 1 Quick Setup - Wireless ¾ Wireless Network Name - Enter a string of up to 32 characters. The same name o f SSID (Service Set Identification) must be assigned to all wireless devices in your network. The default SSID is set to be TP-LINK_XXXXX X (XXXXXX indicates the last unique six ...

  • TP-Link TL-WR710N - page 33

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 19 - ) Note: If 1 1bg mixed mode is selected in the Mode field, the Channel Wid th selecting field will turn grey and the value will become 20M, which is unable to be changed. ¾ Channel Width - Select any channel width from the pull-down list. The default setting is automatic, which can automat ica ...

  • TP-Link TL-WR710N - page 34

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 20 - Figure 3-14 Quick Setup - Wireless ¾ Repeater Mode - In Repeater mode, the wireless repeater relays signal between it s stations and the root AP for greater wireless range. • Universal Repeater - In Repeater mode, the AP with WDS disabled will relay data to an associated root AP. AP f unctio ...

  • TP-Link TL-WR710N - page 35

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 21 - ¾ Wireless Password - If the AP your router is goi ng to connect need pas sword, you need to fill the password in this blank. 2. Click Survey button on the Wireless page as shown in Figure 3-14, and th en AP List page will appe ar as shown in Figure 3-15. Find the SSID of the Acce ss Point you ...

  • TP-Link TL-WR710N - page 36

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 22 - Figure 3-17 Quick Setup - Wireless ¾ Wireless Name of Root AP - Enter the SSID that you want to access. ¾ MAC Address of Root AP - Enter the MAC address of AP that you want to access. ¾ Survey - Click this button, you can survey the AP which runs in the environment. ¾ Region - Select your r ...

  • TP-Link TL-WR710N - page 37

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 23 - Figure 3-18 AP List 3. Click the Next button in Figure 3-19. Y ou will then see the Fin i sh page. Click the Reboot button to make your wireless confi guration take ef fect and finish the Quick Setup . Figure 3-19 Quick Setup - Finish 3.2.5 WISP Client Router Mode When you choose WISP Client Ro ...

  • TP-Link TL-WR710N - page 38

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 24 - ¾ PPPoE - For this connection, you will need your a ccount name and password from your ISP. If you have applied ADSL to realize Dial-up service, you should c hoose this type. Under this condition, you should fill in both the User Name and Passw ord that the ISP supplied. Please note that these ...

  • TP-Link TL-WR710N - page 39

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 25 - Figure 3-23 Quick Setup - S tatic IP ¾ SSID - The SSID of the AP your router is going to connect to as a client. Y ou can also use the search function to select the SSID to j oin. ¾ BSSID - The BSSID of the AP your router is going to connect to as a client. Y ou can also use the search functi ...

  • TP-Link TL-WR710N - page 40

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 26 - ¾ Wireless Security Mode - Y ou can configure the security settings of your wireless network. ¾ Wireless Password - Input the password of your Local SSID. 3. Click Survey button on the Wireless page as shown in Figure 3-20, and th en AP List page will appe ar as shown in Figure 3-24. Find the ...

  • TP-Link TL-WR710N - page 41

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 27 - Chapter 4. Configuration for Wireless Router Mode This chapter will show each Web p age's key func tions and the configuration way for Wireless Router Mode of TL-WR710N. 4.1 Login After your successful login, you can configur e and manage the device. T here are main menus on the left of th ...

  • TP-Link TL-WR710N - page 42

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 28 - Figure 4-2 ¾ Firmware V ersion - The version information of the Router ’s firmware. ¾ Hardware V ersion - The version information of the Router ’s hardware. ¾ LAN - This field displays the current settings or information for the LA N, you can configure them in the Network > LAN page. ...

  • TP-Link TL-WR710N - page 43

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 29 - ¾ Wireless - This field displays basic information or status for wireless function, you can configure them in the Wireless > Wireless Settings page. • Working Mode - The current wireless working mode in use. • Wireless Radio - Indicates whether the wireless radi o feature of the AP is e ...

  • TP-Link TL-WR710N - page 44

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 30 - 4.3 Quick Setup Please refer to Section 3.2: "Quick Installation Guide." 4.4 WPS WPS (Wi-Fi Protected Setup) can help you to quickly and secure ly connect to a network. This section will guide you to add a new wireless device to an existing network qu ickly by function. The WPS functi ...

  • TP-Link TL-WR710N - page 45

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 31 - ) Note: T o build a successful connection by WPS, you s hould also do the correspo nding configuration of the new device for WPS function meanwhile. For the configuration of the new device, here takes the Wireless Adapter of our company for example. I. By PBC If the wireless adapter supports Wi ...

  • TP-Link TL-WR710N - page 46

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 32 - Step 4: Wait for a while until the next screen appears. Click OK to complete the WPS configuration. The WPS Configuration Screen of Wireless Adapter Method T wo: Enter the PIN into my AP Step 1: For the configur ation of the wireless adapter , please choose “ Enter the PIN of this device into ...

  • TP-Link TL-WR710N - page 47

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 33 - Step 3: Choose “ Ent er the new device's PIN ” and enter the PIN code （ take 16952898 for example ） of the wireless adapter in the field after PIN as shown in the figure below. Then click Connect. Figure 4-5 Add A New Device Method Three: Enter the PIN from my AP Step 1: Get the Cu ...

  • TP-Link TL-WR710N - page 48

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 34 - Y ou will see the following screen when the new dev ice has successfully connected to the network. Figure 4-6 ) Note: 1) The WPS LED on the AP will light green for five minutes if the device has been successfully added to the network. 2) The WPS function cannot be confi gured if the Wireless fu ...

  • TP-Link TL-WR710N - page 49

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 35 - ¾ WISP Client Router - In this mode, the device enables mu ltiple users to share Internet connection from WISP . 4.6 Network Figure 4-8 the Network menu There are three submenus under the Network menu (shown in Figure 4-8): WA N , MAC Clone and LAN. Click any of them, and you will be able to c ...

  • TP-Link TL-WR710N - page 50

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 36 - ¾ MTU Size - The normal MTU (Maximum T ransmission Unit ) value for most Ethernet networks is 1500 Bytes. It is not recommended that you change the default MTU Size unless required by your ISP . ¾ Use These DNS Servers - If your ISP gives you one or two DNS addresses, select Use These DNS Ser ...

  • TP-Link TL-WR710N - page 51

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 37 - ¾ MTU Size - The normal MTU (Maximum T ransmission Unit) value for most Ethernet networks is 1500 Bytes. It is not recommended that you change the default MTU Size unless required by your ISP . ¾ Primary/Secondary DNS - (Optional) Enter one or two DNS addresses in dotted-decimal notation prov ...

  • TP-Link TL-WR710N - page 52

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 38 - • Dyn amic IP - Y ou can check this radio button to use Dynamic IP as the secondary connection to connect to the local area network provided by ISP . • St atic IP - Y ou can check this radio button to use St atic IP as the secondary connection to connect to the local area network provided b ...

  • TP-Link TL-WR710N - page 53

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 39 - Figure 4-12 PPPoE Advanced Settings ¾ MTU Size - The default MTU size is “1480” bytes, which is usually fine. It is not recommended that you change the default MTU Size unless required by your ISP . ¾ Service Name/AC Name - The ser vice name and AC (Access Concentrator) name should not be ...

  • TP-Link TL-WR710N - page 54

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 40 - Figure 4-13 WAN – BigPond Cable ¾ User Name/Password - Enter the User Name and Password provided by your ISP . These fields are case-sensitive. ¾ Auth Server - Enter the authenticating serv er IP address or host name. ¾ Auth Domain - T ype in the domain suffix server name based on your loc ...

  • TP-Link TL-WR710N - page 55

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 41 - after a specified i nactivity period and re-established when you a ttempt to access the Internet again. Click the Connect button to connect immediately . Click the Disconnect button to disconnect immediately . Caution : Sometimes the connection cannot be termi nated although you specify a time ...

  • TP-Link TL-WR710N - page 56

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 42 - ¾ Connect on Demand - Y ou can configure the Router to disconnect from your Internet connection after a specified period of inactivity ( Max Idle T ime ). If your Internet connection has been terminat ed due to inactivity , Connect on Demand enables the Router to automatically re-establish you ...

  • TP-Link TL-WR710N - page 57

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 43 - Figure 4-15 W AN – PPTP/Russia PPTP ¾ User Name/Password - Enter the User Name and Password provided by your ISP . These fields are case-sensitive. ¾ Dynamic IP/ S tatic IP - Choose either as you are gi ven by your ISP and enter the ISP’s IP address or the domain name. If you choose stati ...

  • TP-Link TL-WR710N - page 58

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 44 - Idle Time field. Otherwise, enter the number of minutes you want to have elapsed before your Internet connection terminates. ¾ Connect Automatically - Connect automatically after t he Router is disconnected. T o use this option, check the radio button. ¾ Connect Manually - Y ou can configure ...

  • TP-Link TL-WR710N - page 59

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 45 - Click the Save button to save your settings. ) Note: 1. Only the PC on your LAN can use the MAC Address Clone function. 2. If you change W AN MAC Addre ss when the WAN connection is PPPoE, it will not take ef fect until the connection is re-established. 4.6.3 LAN Choose menu “ Network → LAN ...

  • TP-Link TL-WR710N - page 60

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 46 - 4.7 Wireless Figure 4-18 Wireless menu There are five submenus under the Wireless menu (shown in Figure 4-18): Wireless Settings , Wireless Security , Wireless MAC Filtering, Wireless Advanced and Wireless St atistics . Click any of them, and you will be able to c onfigure the corresponding fun ...

  • TP-Link TL-WR710N - page 61

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 47 - the Router in a region other than one of those specified in this field. If your country or region is not listed, please c ontact your local governm ent agency for assistance. ¾ Mode - Select the desired mode. T he default setting is 11bgn mixed. • 11bg mixed - Select if you are using both 80 ...

  • TP-Link TL-WR710N - page 62

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 48 - ¾ BSSID (to be bridged) - The BSSID of the AP your Router is going to connect to as a client. You can also use the search func tion to select the BSSID to join. ¾ Survey - Click this button, you can survey t he AP which runs in the current channel. ¾ Security Options - This option should be ...

  • TP-Link TL-WR710N - page 63

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 49 - Figure 4-21 Wireless Security ¾ Disable Security - The wireless security function can be enabled or disabled . If disabled, the wireless stations will be able to con nect the Ro uter without encryption. But it’s strongl y recommended to choose one of the following modes to enable security. ? ...

  • TP-Link TL-WR710N - page 64

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 50 - Figure 4-22 ¾ WP A /WP A2-Enterprise - It’s based on Radius Server. • Ve r s i o n - you can choose the versi on of the WPA security from the pull-down list. The default setting is Automatic , which can select WP A (Wi-Fi Protected Access) or WP A2 ( WPA version 2) automatically based on t ...

  • TP-Link TL-WR710N - page 65

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 51 - 152-bit - You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is not promoted) or 16 ASCII characters. ) Note: If you do not set the key , the wireless security f unction is still disabled even if you have selected Shared Key as Authentication T ype. Be sure to click ...

  • TP-Link TL-WR710N - page 66

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 52 - To add or modify a MAC Address Filtering entry, follo w these instructions: 1. Enter the appropriate MAC Address into the MAC Address field. The format of the MAC Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit) . For example: 00-0A-EB-B0-00-0B. 2. Give a simple description for the wir ...

  • TP-Link TL-WR710N - page 67

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 53 - Figure 4-25 Filtering Rules 4.7.4 Wireless Advanced Choose menu “ Wireless → Wireless Advanced ”, and then you can configure the a dvanced settings of your wireless network. Figure 4-26 Wireless Advanced ¾ Transmit Power - Here you can specify the transmit power of Router. You can select ...

  • TP-Link TL-WR710N - page 68

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 54 - broadcast and multicast messages . When the Router has buffered broadcast or multicast messages for associated clients, it sends the next DTIM with a DTIM Interval value. You can specify the value between 1-255 Beacon Interval s. The default value is 1, which indicates the DTIM Interval is the ...

  • TP-Link TL-WR710N - page 69

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 55 - You cannot change any of the values on this page. To update this page and to show the current connected wireless stations, click on the Refresh button. If the numbers of connected wireless st ations go beyond one page, click the Next button to go to the next page and click the Previous button t ...

  • TP-Link TL-WR710N - page 70

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 56 - ¾ St art IP Address - S pecify an IP address for the DHCP Server to start with when assigning IP addresses. 192.168.0.100 is the default start address. ¾ End IP Address - S pecify an IP address for the DHCP Server to end with when assigning IP addresses. 192.168.0.199 is the default end addre ...

  • TP-Link TL-WR710N - page 71

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 57 - You cannot change any of the val ues on this page. To update this page and to show the current attached devices, click the Refresh button. 4.8.3 Address Reservation Choose menu “ DHCP → Address Reserv ation ”, and then you can view and add a reserved address for clients via the next scree ...

  • TP-Link TL-WR710N - page 72

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 58 - To modify or delete an existing entry: 1. Click the Modify in the entry you want to modify . If you want to delete the entry , click the Delete . 2. Modify the information. 3. Click the Save button. Click the Enable/Disable All button to make all entries enabled/disabled. Click the Delete All b ...

  • TP-Link TL-WR710N - page 73

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 59 - ¾ Volume - The volume name of the USB drive the users have access to. Volume 1-8 is mapping to USB port1, and Volume 9-16 is mapping to USB port2. ¾ Capacity - The storage capacity of the USB driver. ¾ Used - The used space of the USB driver. ¾ Free - The available space of the USB driver. ...

  • TP-Link TL-WR710N - page 74

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 60 - 3. To unplug the USB drive, click Eject Disk button first. Simply pulling USB drive out of the USB port can cause damage to the device and loss of data. 4. Mounted vol umes of each USB port are subject to the 8-volume limit. So you cannot access more than 8 volumes on the USB storage device. 5. ...

  • TP-Link TL-WR710N - page 75

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 61 - 2. Click the Start button to start the media server, an d then the screen will appear as shown in Figure 4-38. Figure 4-38 Media Server Setting 3. Click the Add share fold er button to specify a folder as t he search path of media server. The screen will then appear as shown in Figure 4-39. Fig ...

  • TP-Link TL-WR710N - page 76

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 62 - ¾ Back - Click this button to discard the se ttings and just go to the media server configuration page. 4. Click the Scan All button to scan all the share folders i mmediately. You can also select the Auto-scan , at same time, select an auto scan interval time by drop-down list. In this case, ...

  • TP-Link TL-WR710N - page 77

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 63 - Figure 4-41 Add or Modify User Account ¾ User Name - Type the user name that you want to give access to the USB drive. The user name must be composed of alphanumeric symbols not ex ceeding 15 characters in length. ¾ Password - Enter the password in the Password field. The password must be com ...

  • TP-Link TL-WR710N - page 78

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 64 - There are four submenus under the Forwar ding menu (shown in Figure 4-42): Virtual Servers , Port T riggering , DMZ and UPnP . Click any of them, and you will be able to configure the corresponding function. 4.10.1 Virtual Servers Choose menu “ Forwarding → Virtual Servers ”, and then you ...

  • TP-Link TL-WR710N - page 79

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 65 - 4. Select the protocol used for this application, either TCP , UDP , or All . 5. Select the Enabled to enable the virtual server . 6. Click the Save button. Figure 4-44 Add or Modify a V irtual Server Entry ) Note: If your computer or server has more than one ty pe of available service, please ...

  • TP-Link TL-WR710N - page 80

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 66 - with a pure NA T Router . Port Triggering is used for some of these applications that can work with an NA T Router . Figure 4-45 Port T riggering Once the Router is configured, the operation is as follows: 1. A local host makes an outgoing connection us ing a destination port number defined in ...

  • TP-Link TL-WR710N - page 81

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 67 - 4. Select the pr otocol used for Incoming Ports from the Incoming Protocol drop-down list, either TCP or UDP , or All . 5. Select Enabled in Statu s field. 6. Click the Save button to save the new rule. Figure 4-46 Add or Modify a Port Triggering Entry T o modify or delete an existing entry: 1. ...

  • TP-Link TL-WR710N - page 82

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 68 - Figure 4-47 DMZ T o assign a computer or server to be a DMZ server: 1. Check the Enable radio button. 2. Enter the IP Address of a local host in the DMZ Host IP Address field. 3. Click the Save button. ) Note: After you set the DMZ host, the firewa ll related to the host will not work. 4.10.4 U ...

  • TP-Link TL-WR710N - page 83

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 69 - • Status - The status of the port is displayed her e. “Enabled” means that the port is still active. Otherwise, the port is inactive. Click Refresh to update the Current UPnP Settings List. 4.11 Security Figure 4-49 T he Security menu There are four submenus under t he Security menu as sh ...

  • TP-Link TL-WR710N - page 84

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 70 - traffic passing through the session conforms to the protocol. SPI Firewall is enabled by factory default. If you want all the comput ers on the LAN exp osed to the outside world, you can disable it. ¾ VPN - VPN Passthrough must be enabled if you want to allow VPN tunnels using IPSec, PPTP, or ...

  • TP-Link TL-WR710N - page 85

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 71 - Figure 4-51 Advanced Security ¾ Packets Statistics Interval (5~60) - The default value is 10. Se lect a value between 5 and 60 seconds from the drop-down list. The Packets S tatistics Interval value indicates the time section of the p ackets statistics. The result of the statistics is used for ...

  • TP-Link TL-WR710N - page 86

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 72 - ¾ Enable TCP-SYN-FLOOD Attack Filtering - Enable or Disable the TCP-SYN-FLOOD Attack Filtering. ¾ TCP-SYN-FLOOD Packets Threshold (5~3600) - The default value is 50. Enter a value between 5 ~ 3600. When the current TCP-SYN-FLOOD Packets numbers is beyond the set value, the Router will startup ...

  • TP-Link TL-WR710N - page 87

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 73 - use the password to browse the built-in web pages to perform Administrator tasks while all the others will be blocked. After click the Add button, your PC's MAC Addre ss will be placed in the list above. Click the Save button to save your settings. ) Note: If your PC is blocked but you wan ...

  • TP-Link TL-WR710N - page 88

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 74 - 4.12 Parent al Control Choose menu “ Parental Control ”, and you can configure the par ental control in the screen as shown in Figure 4-54. The Parental Control function can be used to control the internet a ctivities of the child, limit the child to access certai n websites and restrict th ...

  • TP-Link TL-WR710N - page 89

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 75 - 4. Enter the allowed domain name of the websit e, either the full name or the keywords (e.g. google) in the Allowed Domain Name field. Any domain name with keywor ds in it (e.g. www.google.com ) will be allowed. 5. Select from the Effective Time drop-down list the schedule (e.g. Schedule_1) you ...

  • TP-Link TL-WR710N - page 90

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 76 - 2. Click “ Access Restriction → Schedule ” on the left to enter the Schedule Settings p age. Click Add New... button to create a new schedule with Schedule Description is Schedule_1, Day is Sat and Time is all day-24 hours. 3. Click “ Parental Control ” menu on the left to go back to ...

  • TP-Link TL-WR710N - page 91

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 77 - Figure 4-58 Access Control Rule Management ¾ Enable Internet Access Control - Select the check box to enable the Internet Access Restriction function, so the Defaul t Filter Policy can take effect. ¾ Rule Name - Here displays the name of the rule and this name is unique. ¾ Host - Here displa ...

  • TP-Link TL-WR710N - page 92

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 78 - 6. In the Action field, select Den y or Allow . 7. In the Status field, select Enabled or Disabled to enable or disable your entry. 8. Click the Save button. Click the Enable All button to enable all the rules in the list. Click the Disable All button to disable all the rules in the list. Click ...

  • TP-Link TL-WR710N - page 93

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 79 - z In Rule Name field, create a name for the rule. No te that this name should be unique, for example Rule_1. z In Host field, select Host_1. z In Target field, select Target_1. z In Schedule field, select Schedule_1. z In Action field, select Allow. z In Status field, select Enabled. z Click Sa ...

  • TP-Link TL-WR710N - page 94

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 80 - 2) In LAN IP Address field, enter the IP address. z If you select MAC Address, the screen shown is Figure 4-63. 1) In Host Description field, create a unique description for the host (e.g. Host_1). 2) In MAC Address field, enter the MAC address. 3. Click the Save button to complete the settings ...

  • TP-Link TL-WR710N - page 95

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 81 - Figure 4-64 Host Settings 4.13.3 Target Choose menu “ Access Control → Ta r g e t ”, you can vie w and set a T a rget list in the screen as shown in Figure 4-65. The ta rget list is necessa ry for the Access Restriction Rule. Figure 4-65 T arget Settings ¾ Target Description - Here displ ...

  • TP-Link TL-WR710N - page 96

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 82 - 2) In Domain Name field, enter the domain name, eit her the full name or the keywords (for example Google) in the bla nk. Any domain name with keywor ds in it (e.g. www.google.com ) will be blocked or allowed. You can enter 4 domain names. 3. Click the Save button. Click the Delete All button t ...

  • TP-Link TL-WR710N - page 97

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 83 - Then you will go back to the Target Settings page and see the following list, Figure 4-68 T arget Settings 4.13.4 Schedule Choose menu “ Access Control → Schedule ”, you can view and set a Schedule list in the next screen as shown in Figure 4-69. The Schedule list is necessa ry for the Ac ...

  • TP-Link TL-WR710N - page 98

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 84 - Click the Next button to go to the next page, or click the Previous button return to the previ ous page. Figure 4-70 Advanced Schedule Settings For example : If you desire to restrict the inter net activities of host with MAC address 00-11-22-33-44-AA to access www.google.com only from 18:00 to ...

  • TP-Link TL-WR710N - page 99

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 85 - 4.14 Advanced Routing Figure 4-72 The Advanced Routing Menu There are two submenus under the Network menu (shown in Figure 4-72): St atic Routing List and Syst em Routing T able . Click any of them, and you will be able to configure the corresponding function. 4.14.1 Static Routing List Choose ...

  • TP-Link TL-WR710N - page 100

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 86 - ¾ Subnet Mask - The Subnet Mask determines which portion of an IP Address is the network portion, and which por tion is the host portion. ¾ Default Gatewa y - This is the IP Address of the gat eway device that a llows for contact between the Router a nd the network or host. 3. Select Enabled ...

  • TP-Link TL-WR710N - page 101

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 87 - 4.15 Bandwid th Control Figure 4-76 T he Bandwidth Control menu There are two submenus under the Bandw idth Control menu as shown in Figure 4-76. Click any of them, and you will be able to configure the corresponding function. T he detailed explanations for each submenu are provided below . 4.1 ...

  • TP-Link TL-WR710N - page 102

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 88 - Figure 4-78 Bandwidth Control Rule List ¾ Description - This is the information about the rules such as ad dress range. ¾ Egress Bandwidth - This field displa ys the max and mix uploa d bandwidth through the W AN port, the default is 0. ¾ Ingress Bandwidth - This field displays the max and m ...

  • TP-Link TL-WR710N - page 103

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 89 - ¾ Egress Bandwidth - The max and the min uplo ad speed which through the WAN por t, default number is 0. ¾ Ingress Bandwidth - The max and the min download speed through the WAN po rt, default number is 0. Step 3: Click the Save button. 4.16 IP & MAC Binding Figure 4-80 T he IP & MAC ...

  • TP-Link TL-WR710N - page 104

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 90 - When you want to add or modify an IP & MAC Binding entry, you can click the Add New button or Modify button, and then you will go to the next page. This page is used for adding or modifying an IP & MAC Binding entry. Figure 4-82 IP & MAC Bin ding Setting (Add & Modify) T o add I ...

  • TP-Link TL-WR710N - page 105

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 91 - Click the Enable All button to make all entries enabled. Click the Delete All button to delete all entries. 4.16.2 ARP List T o manage the computer , you could observe the computers in the LAN by checking the relationship of MAC address and IP address on the ARP list, a nd you could configure t ...

  • TP-Link TL-WR710N - page 106

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 92 - dynamic IP address, and then your friends can c onnect to your server by entering your domain name no matter what your IP address is. Before us ing this feature, you need to sign up for DDNS service providers such as www.no-ip.com , www.comexe.cn , or www .dyndns.org . The Dynamic DNS client se ...

  • TP-Link TL-WR710N - page 107

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 93 - Figure 4-86 Comexe.cn DDNS Settings To set up for DDNS, follow these instructions: 1. T ype the Domain Name received from your dynamic DNS service provider . 2. T ype the User Na me for your DDNS account. 3. T ype the Password for your DDNS account. 4. Click the Login button to log in to the DD ...

  • TP-Link TL-WR710N - page 108

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 94 - Figure 4-87 Dyndns.org DDNS Settings To set up for DDNS, follow these instructions: 1. T ype the User Na me for your DDNS account. 2. T ype the Password for your DDNS account. 3. T ype the Domain Name you received from dynamic DNS service provider here. 4. Click the Login button to log in to th ...

  • TP-Link TL-WR710N - page 109

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 95 - St atistics. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below . 4.18.1 Time Settings Y ou can set time manually or get GMT from the Internet for the router on this page: Figure 4-89 T ime Settings ¾ T ...

  • TP-Link TL-WR710N - page 110

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 96 - ¾ The router will obtain GMT automatica lly from Inte rnet if it has already connected to Internet. 4.18.2 Diagnostic Choose menu “ System T ools → Diagnostic ”, you can transact Ping or T raceroute function to check connectivity of your net work in the following screen. Figure 4-90 Diag ...

  • TP-Link TL-WR710N - page 111

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 97 - ¾ Ping Ti meout - Set the waiting time for the reply of each Ping packet. If there is no reply in the specified time, the connection is overtime. ¾ T raceroute Max TTL - The max num ber of hops for a Traceroute connection. Click St a rt to check the connectivity of the Internet. The Diagnosti ...

  • TP-Link TL-WR710N - page 112

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 98 - ) Note: 1. When you upgrade the router 's firmware, you will lose current configuration settings, so make sure you backup the router’s settings before you upgrade its firmware. 2. Make sure that your computer is connect ed to the Internet through the cable when you upgrade the firmware. ...

  • TP-Link TL-WR710N - page 113

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 99 - 4.18.5 Backup & Restore This page allows you to save curr ent configuration of router as backup or rest ore the configuration file you saved before. Figure 4-94 Backup & Restore Configuration ¾ Click the Backup button to save all configuration setti ngs as a backup file in your local c ...

  • TP-Link TL-WR710N - page 114

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 100 - ¾ Web Service Port of the router . ¾ Upgrade the firmware of the router (system will reboot automatically). ¾ Restore the router's settings to factory default (system will rebo ot automatically). 4.18.7 Password This page allows you to change the factory default user name and password ...

  • TP-Link TL-WR710N - page 115

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 101 - Figure 4-97 System Log ¾ Refresh - Refresh the page to s how the latest log list. ¾ Save Log - Click to save all the logs i n a txt file. ¾ Mail Log - Click to send an email of current l ogs manually according to the address and validation information set in Mail Settings. T he result will ...

  • TP-Link TL-WR710N - page 116

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 102 - Figure 4-98 S tatistics ¾ Current St atistics St atus - Enable or Disable. The default va lue is disabled. T o enable, click the Enable button. If disabled, the function of DoS protection in Security settings will be ineffective. ¾ Packet s St a tistics Interval - The default value is 10. Se ...

  • TP-Link TL-WR710N - page 117

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 103 - Chapter 5. Configuration for Access Point Mode This chapter will show each Web p age's key func tions and the configuration way for Access Point Mode of TL-WR710N. 5.1 Login After your successful login, you can configur e and manage the device. T here are main menus on the left of the web ...

  • TP-Link TL-WR710N - page 118

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 104 - Figure 5-2 S tatus ¾ Firmware V ersion - The version information of the Router ’s firmware. ¾ Hardware V ersion - The version information of the Router ’s hardware. ¾ Wir ed - This field displays the current settings or information for the LA N, you can configure them in the Network > ...

  • TP-Link TL-WR710N - page 119

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 105 - • Channel Wid th - The current wireless channel width in use. • MAC Address - The physical address of the R outer , as seen from the WLAN. ¾ T raffic S tatistics - The Router ’s traf fic statistics. • Received (Bytes) - Traf fic that counted in bytes has been received out from the WAN ...

  • TP-Link TL-WR710N - page 120

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 106 - ¾ Disable PIN of this Device - WPS external registrar of ent ering the device’s PIN can be disabled or enabled manually . If the device receiv es multiple failed attempts to authenticate an external Registrar , this func tion will be disabled automatically . ¾ Add Device - Y ou can add a n ...

  • TP-Link TL-WR710N - page 121

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 107 - The WPS Configuration Screen of Wireless Adapter Step 4: Wait for a while until the next screen appears. Click OK to complete the WPS configuration. The WPS Configuration Screen of Wireless Adapter Method T wo: Enter the PIN into my AP Step 1: For the confi guration of the wirele ss adapter , ...

  • TP-Link TL-WR710N - page 122

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 108 - The WPS Configuration Screen of Wireless Adapter ) Note: In this example, the default PIN code of this adapter is 16952898 as the above figure shown. Step 2: Keep the WPS S tatus as Enabled and click the Add Device button in Figure 5-3. Step 3: Choose “ Enter the new device's PIN ” an ...

  • TP-Link TL-WR710N - page 123

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 109 - Step 2: For the confi guration of the wirele ss adapter , please choose “ Enter the PIN of my access point or wireless router ” in the configuration utility of the WPS as below , and enter the PIN code of the AP into the field after “ Access Point PIN ”. Then click Connect . The WPS Co ...

  • TP-Link TL-WR710N - page 124

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 1 10 - 5.5 Wo rking Mode The Router supports fi ve operation mode types: Wireless Router , Access Point, Repeater , Client and Wireless Client Router . Please select one you want. Click Save to save your choice, which is shown as Figure 5-7. Figure 5-7 Wireless Working Mode Settings ¾ Wireless Rout ...

  • TP-Link TL-WR710N - page 125

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 1 1 1 - Figure 5-9 LAN ¾ MAC Address - The physical address of the LAN p orts, as seen from the LAN. The value can not be changed. ¾ Ty p e - Choosing Smart IP (DHCP) to get IP addre ss from DHCP server , or choosing static IP to config IP a ddress manu ally . ¾ IP Address - Enter the IP address ...

  • TP-Link TL-WR710N - page 126

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 1 12 - There are five submenus under the Wireless menu (shown in Figure 5-10): Wireless Settings , Wireless Security , Wireless MAC Filtering, Wireless Advanced and Wireless St atistics . Click any of them, and you will be able to c onfigure the corresponding function. 5.7.1 Wireless Settings Choose ...

  • TP-Link TL-WR710N - page 127

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 1 13 - When 11bg mixed mode is selected, only 11bg mi xed wir eless stations can connect to the Router. It is strongly recommended that y ou set the Mode to 11bgn mixed, and all of 802.11b/g/n wireless stations can connect to the Router. ) Note: If 1 1bg mixed mode is selected in the Mode field, the ...

  • TP-Link TL-WR710N - page 128

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 1 14 - Figure 5-12 Wireless Security ¾ Disable Security - The wireless security function can be enabled or disabled . If disabled, the wireless stations will be able to con nect the Ro uter without encryption. But it’s strongl y recommended to choose one of the following modes to enable security. ...

  • TP-Link TL-WR710N - page 129

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 1 15 - Figure 5-13 ¾ WP A /WP A2-Enterprise - It’s based on Radius Server. • Ve r s i o n - you can choose the versi on of the WPA security from the pull-down list. The default setting is Automatic , which can select WP A (Wi-Fi Protected Access) or WP A2 ( WPA version 2) automatically based on ...

  • TP-Link TL-WR710N - page 130

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 1 16 - 152-bit - You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is not promoted) or 16 ASCII characters. ) Note: If you do not set the key , the wireless security f unction is still disabled even if you have selected Shared Key as Authentication T ype. 5.7.3 Wireless ...

  • TP-Link TL-WR710N - page 131

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 1 17 - To add or modify a MAC Address Filtering entry, follo w these instructions: 1. Enter the appropriate MAC Address into the MAC Address field. The format of the MAC Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit) . For example: 00-0A-EB-B0-00-0B. 2. Give a simple description for the w ...

  • TP-Link TL-WR710N - page 132

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 1 18 - 5.7.4 Wireless Advanced Choose menu “ Wireless → Wireless Advanced ”, and then you can configure the a dvanced settings of your wireless network. Figure 5-16 Wireless Advanced ¾ Transmit Power - Here you can specify the transmit power of Router. You can select High, Middle or Low which ...

  • TP-Link TL-WR710N - page 133

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 1 19 - messages for associated clients, it sends the next DTIM with a DTIM Interval value. You can specify the value between 1-255 Beacon Interval s. The default value is 1, which indicates the DTIM Interval is the same as Beacon Interval. ¾ Enable WMM - WMM function can guarantee the packets with ...

  • TP-Link TL-WR710N - page 134

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 120 - If the numbers of connected wireless st ations go beyond one page, click the Next button to go to the next page and click the Previous button to return the previous page. ) Note: This page will be refreshed autom atically every 5 seconds. 5.8 DHCP Figure 5-18 The DHCP menu There are three subm ...

  • TP-Link TL-WR710N - page 135

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 121 - ¾ St art IP Address - S pecify an IP address for the DHCP Server to start with when assigning IP addresses. 192.168.0.100 is the default start address. ¾ End IP Address - S pecify an IP address for the DHCP Server to end with when assigning IP addresses. 192.168.0.199 is the default end addr ...

  • TP-Link TL-WR710N - page 136

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 122 - Figure 5-21 DHCP Clie nt List ¾ Client Name - The name of the DHCP client ¾ MAC Address - The MAC address of the DHCP client ¾ Assigned IP - The IP address that the Router has allocated to the DHCP client ¾ Lease Time - The time of the DHCP cli ent leased. After the dynami c IP address has ...

  • TP-Link TL-WR710N - page 137

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 123 - 2. Enter the MAC address (in XX-XX-XX-XX-XX-XX format.) and IP address (in dotted-decimal notation) of the computer for which yo u want to reserve an IP a ddress. 3. Click the Save button. Figure 5-23 Add or Modify an Address Reservation Entry To modify or delete an existing entry: 1. Click th ...

  • TP-Link TL-WR710N - page 138

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 124 - Figure 5-25 S torage Sharing ¾ Service Status - Indicates the Network Sharing servic e's current status. You can click the Start button to start the Storage Sharing service and click the Stop button to stop it. ¾ Volume - The volume name of the USB drive the users have access to. Volume ...

  • TP-Link TL-WR710N - page 139

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 125 - Click the Rescan button to start a new scan. Follow the instructions below to set up your router as a file server: 1. Plug an external USB har d disk drive or USB flash drive into this router. 2. Click the Rescan button to find the USB drive that has been attached to the router. 3. Click the S ...

  • TP-Link TL-WR710N - page 140

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 126 - ¾ Delete - You can delete the share folder by click Dele te . To set up your media server, please follo w the instructions below: 1. Plug an external USB hard disk drive or USB fl ash drive into this router, and then the screen will appear as shown in Figure 5-28. Figure 5-28 Media Server Set ...

  • TP-Link TL-WR710N - page 141

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 127 - Figure 5-30 Add New Folder ¾ Display Name - You can enter a display name for the share folder. ¾ Share entire partition - Choose this option and then t he folders contained in this partition will all be shared. ¾ Folder Location - Displays the location of this folder. ¾ Select - Check the ...

  • TP-Link TL-WR710N - page 142

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 128 - can access FTP Server while Guest has read-only access to S torage Sharing and cannot access FTP Server . Figure 5-31 User Account Management Only Administrator can use a Web browser to transf er the files from a PC to the Writ able shared volume on the USB drive. T o add a new user account, p ...

  • TP-Link TL-WR710N - page 143

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 129 - ¾ Storage Authority – Choose Read and Write or Read Onl y from the drop-down list to assign access authority of St orage Sharing to the user. ¾ Save - You can click the Save button to save your settings. ¾ Back - You can click the Back button to discard the settings and just go to the med ...

  • TP-Link TL-WR710N - page 144

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 130 - Figure 5-34 Diagnostic T ools ¾ Diagnostic T ool - Check the radio button to select one diagnostic tool. • Ping - This diagnostic tool troubles hoots connectivity , reachabilit y , and name resolution to a given host or gateway . • T raceroute - This diagnostic tool tests the performance ...

  • TP-Link TL-WR710N - page 145

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 131 - The Diagnostic Result s page displays the result of diagnosis. If the result is similar to the following screen, the connectivity of t he Internet is fine. Figure 5-35 Diagnostic Results ) Note: Only one user can use this tool at one time. Op tions “Number of Pings”, “Ping Size” and ? ...

  • TP-Link TL-WR710N - page 146

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 132 - ) Note: 1. New firmware vers ions are posted at http://www.tp-link.com and can be downloaded for free. There is no need to upgrade the firmware u nle ss the new firmware has a new feature you want to use. However, when experiencing probl ems caused by the Router rather than the configuration, ...

  • TP-Link TL-WR710N - page 147

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 133 - Figure 5-38 Backup & Restore Configu ration ¾ Click the Backup button to save all configuration setti ngs as a backup file in your local computer . ¾ T o upgrade the Router's configurat ion, follow these instructions. • Click the Browse… button to locate the update file for the ...

  • TP-Link TL-WR710N - page 148

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 134 - 5.10.6 Password Choose menu “ System T ools → Pass w ord ”, and then you can change th e factory def ault user name and password of the Router in the next screen as shown in Figure 5-40. Figure 5-40 Password It is strongly recommended that you should change the factor y default user name ...

  • TP-Link TL-WR710N - page 149

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 135 - 5.10.7 System Log Choose menu “ System T ools → System Log ”, and then you can view the logs of the Router. Figure 5-41 System Log ¾ Refresh - Refresh the page to s how the latest log list. ¾ Save Log - Click to save all the logs i n a txt file. ¾ Mail Log - Click to send an email of ...

  • TP-Link TL-WR710N - page 150

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 136 - Chapter 6. Configuration for Repeater Mode This chapter will show each W eb page's key functions and the c onfiguration way for Repeater Mode of TL-WR710N. 6.1 Login After your successful login, you can configur e and manage the device. T here are main menus on the left of the web-based u ...

  • TP-Link TL-WR710N - page 151

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 137 - Figure 6-2 S tatus ¾ Firmware V ersion - The version information of the Router ’s firmware. ¾ Hardware V ersion - The version information of the Router ’s hardware. ¾ Wir ed - This field displays the current settings or information for the LA N, you can configure them in the Network > ...

  • TP-Link TL-WR710N - page 152

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 138 - • Channel Wid th - The current wireless channel width in use. • MAC Address - The physical address of the R outer , as seen from the WLAN. ¾ T raffic S tatistics - The Router ’s traf fic statistics. • Received (Bytes) - Traf fic that counted in bytes has been received out from the WAN ...

  • TP-Link TL-WR710N - page 153

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 139 - ¾ WISP Client Router - In this mode, the device enables mu ltiple users to share Internet connection from WISP . 6.5 Network Figure 6-4 the Network menu There is only one submenu under the Network menu (shown in Figure 6-4): LAN . 6.5.1 LAN Choose menu “ Network → LAN ”, and then you ca ...

  • TP-Link TL-WR710N - page 154

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 140 - 6.6 Wireless Figure 6-6 Wireless menu There are five submenus under the Wireless menu (shown in Figure 6-6): Wireless Settings , Wireless Security , MAC Filtering, Wireless Advanced and Wireless St atistics . Click it, and you will be able to configur e the corresponding function. 6.6.1 Wirele ...

  • TP-Link TL-WR710N - page 155

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 141 - ¾ MAC Address of Root AP - The MAC address of AP that you want to access. ¾ Survey - Click this button, you can search t he AP which runs in the environment. ¾ Region - Select your region from the pull-down lis t. This field specifies the region w here the wireless function of the Router ca ...

  • TP-Link TL-WR710N - page 156

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 142 - 2. Failure to follow these gui delines can result in significant performance degradation or inabi lity to wirelessly connect to the Router . 6.6.2 Wireless Security Choose menu “ Wi rel es s → W ireless Securit y ”, and then you can configure the security settings of your wireless networ ...

  • TP-Link TL-WR710N - page 157

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 143 - WP A2-PSK (Pre-shared key of WPA) automatic ally based on the wireless station's capability and request. • Encryption - When WPA-PSK or WPA is set as the Authenticat ion Type, you can select either Automatic , or TKIP or AES as Encryption. ) Note: If you check the WP A/WP A2-Personal ra ...

  • TP-Link TL-WR710N - page 158

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 144 - • WEP Key (Password) - Select which of the four keys will be used and enter the matching WEP key that you create. Make sure these val ues are identical on all wireless stations in your network. • Key Type - You can select the WEP key length (64-bit, or 128-bit, or 152-bit.) for encryption. ...

  • TP-Link TL-WR710N - page 159

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 145 - Figure 6-12 Add or Modify Wireless MA C Address Filtering entry To add or modify a MAC Address Filtering entry, follo w these instructions: 1. Enter the appropriate MAC Address into the MAC Address field. The format of the MAC Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit) . For exa ...

  • TP-Link TL-WR710N - page 160

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 146 - 4. Click the Add New... button. • Enter the MAC address 00-0A-EB-B 0-00-0B/00-0 A-EB-00-07-5 F in the MAC Address field. • Enter wireless station A/B in the Description field. • Select Enabled in the Status pull-down list. • Click the Save button. • Click the Back button. The filteri ...

  • TP-Link TL-WR710N - page 161

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 147 - ¾ Fragmentation Threshold - This value is the maximum size determining whether packets will be fragmented. Setting the Fragmentation Thre shold too low may result in poor network performance because of excessive packe ts. 2346 is the default setting and is recommended. ¾ DTIM Interval - This ...

  • TP-Link TL-WR710N - page 162

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 148 - ¾ Received Packets - Packets received by the station ¾ Sent Packets - Packets sent by the station ¾ Configure - The button is used for loading the item to the Wireless MAC Filtering list. You cannot change any of the values on this page. To update this page and to show the current connected ...

  • TP-Link TL-WR710N - page 163

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 149 - Figure 6-16 DHCP Setting s ¾ DHCP Server - Enable or Disable the DHCP server . If you dis able the Server , you must have another DHCP server within your network o r else you must configure the computer manually . ¾ St art IP Address - S pecify an IP address for the DHCP Server to start with ...

  • TP-Link TL-WR710N - page 164

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 150 - Figure 6-17 DHCP Settings 6.7.2 DHCP Client List Choose menu “ DHCP → DHCP Client List ”, and then you can view t he information about the clients attach ed to the Router in the screen as shown in Figure 6-18. Figure 6-18 DHCP Clie nt List ¾ Client Name - The name of the DHCP client ¾ ...

  • TP-Link TL-WR710N - page 165

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 151 - Figure 6-19 Address Reservation ¾ MAC Address - The MAC address of the PC for which you want to reserve an IP address. ¾ Reserved IP Address - The IP address reserved for the PC by the Router. ¾ Status - The status of this entry either Enabled or Disabled . ¾ Modify - To modify or delete a ...

  • TP-Link TL-WR710N - page 166

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 152 - 6.8 USB Settings Figure 6-21 T he USB Settings menu There are three submenus under t he USB Settings menu (shown in Figure 6-21), St or ag e Sharing , Media Server and User Accounts . Click any of them, and yo u will be able to configure the corresponding functions. 6.8.1 Storage Sharing Choos ...

  • TP-Link TL-WR710N - page 167

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 153 - ¾ Shared - Indicates the shared or non-shared stat us of the volume. When the volume is shared, you can click the Disable to stop sharing the volume; when volume is non-shared, you can click the Enable button to share the volume. Click the Start button to start the Network Sharing service. Cl ...

  • TP-Link TL-WR710N - page 168

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 154 - 6.8.2 Media Server Choose menu “ USB Settings → Media Server ”, you can create media serv er that allows you to share stored content with other computers and devi ces on your home network and on the Internet. Figure 6-24 Media Server Setting ¾ Server Name - The name of this Media Server ...

  • TP-Link TL-WR710N - page 169

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 155 - Figure 6-26 Media Server Setting 3. Click the Add share fold er button to specify a folder as t he search path of media server. The screen will then appear as shown in Figure 6-27. Figure 6-27 Add New Folder ¾ Display Name - You can enter a display name for the share folder. ¾ Share entire p ...

  • TP-Link TL-WR710N - page 170

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 156 - 4. Click the Scan All button to scan all the share folders i mmediately. You can also select the Auto-scan , at same time, select an auto scan interval time by drop-down list. In this case, the media server will auto sc an the share folders. ) Note: The max share folders number is 6. If you w ...

  • TP-Link TL-WR710N - page 171

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 157 - Figure 6-29 Add or Modify User Account ¾ User Name - Type the user name that you want to give access to the USB drive. The user name must be composed of alphanumeric symbols not ex ceeding 15 characters in length. ¾ Password - Enter the password in the Password field. The password must be co ...

  • TP-Link TL-WR710N - page 172

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 158 - 6.9 System T ools Figure 6-30 T he System T ools menu Choose menu “ System T ools ”, and then you can see the submenus under the ma in menu: Diagnostic , Firmware Upgrade , Factory Default s, Backup & Restore, Reboot, Password, and System Log. Click any of them, and you will be able to ...

  • TP-Link TL-WR710N - page 173

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 159 - • Ping - This diagnostic tool troubleshoots connectivity , reachabilit y , and name resolution to a given host or gateway . • T raceroute - This diagnostic tool tests the performance of a connection. ) Note: Y ou can use ping/traceroute to test both numeric IP address or domain name. If pi ...

  • TP-Link TL-WR710N - page 174

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 160 - Figure 6-33 Firmware Upgrade ¾ Firmware Version - This displays the current firmware version. ¾ Hardware Version - This displays the current hardware version. The hardware version of the upgrade file must accord with the R outer’s current hardware version. T o upgrade the Router's fir ...

  • TP-Link TL-WR710N - page 175

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 161 - Figure 6-34 Restore Factory Default Click the Restore button to reset all configuration settings to their default values. ¾ The default User Name : admin ¾ The default Password : admin ¾ The default IP Address : 192.168.0.254 ¾ The default Subnet Mask : 255.255.255.0 ) Note: All changed se ...

  • TP-Link TL-WR710N - page 176

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 162 - 6.9.5 Reboot Choose menu “ System T ools → Reboot ”, and then you can click the Reboot button to reboot the Router via the next screen. Figure 6-36 Reboot the Router Some settings of the Router will take effect only after rebooting, including: ¾ Change the LAN IP Address (syst em will r ...

  • TP-Link TL-WR710N - page 177

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 163 - ) Note: The new user name and password must not exceed 14 characters in length and not include any spaces. Enter the new Passw ord twice to confirm. Click the Save button when finished. Click the Clear All button to clear all. 6.9.7 System Log Choose menu “ System T ools → System Log ”, ...

  • TP-Link TL-WR710N - page 178

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 164 - Chapter 7. Configuration for Client Mode This chapter will show each Web p age's key func tions and the configuratio n way for Client Mode of TL-WR710N. 7.1 Login After your successful login, you can configur e and manage the device. T here are main menus on the left of the web-based util ...

  • TP-Link TL-WR710N - page 179

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 165 - Figure 7-2 S tatus ¾ Firmware V ersion - The version information of the Router ’s firmware. ¾ Hardware V ersion - The version information of the Router ’s hardware. ¾ Wir ed - This field displays the current settings or information for the LA N, you can configure them in the Network > ...

  • TP-Link TL-WR710N - page 180

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 166 - • Channel Wid th - The current wireless channel width in use. • MAC Address - The physical address of the R outer , as seen from the WLAN. ¾ T raffic S tatistics - The Router ’s traf fic statistics. • Received (Bytes) - Traf fic that counted in bytes has been received out from the WAN ...

  • TP-Link TL-WR710N - page 181

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 167 - ¾ WISP Client Router - In this mode, the device enables mu ltiple users to share Internet connection from WISP . 7.5 Network Figure 7-4 the Network menu There is only one submenu under the Network menu (shown in Figure 7-4): LAN . 7.5.1 LAN Choose menu “ Network → LAN ”, and then you ca ...

  • TP-Link TL-WR710N - page 182

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 168 - 3. When you choose the Smart IP (DHCP) mode, the DHCP Server function will be disabled. 7.6 Wireless Figure 7-6 Wireless menu There are two submenus under the Wireless menu (shown in Figure 7-6): Wireless Settings and Wireless Security . Click any of them, and you will be able to configure the ...

  • TP-Link TL-WR710N - page 183

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 169 - ¾ Enable Wireless Radio - The wireless radio of the AP can be enabled or disabled to allow or deny wireless stations to access. If enabled, the wireless stations will be able to access the AP , otherwise, wireless stations will not be able to acce ss the AP . ¾ Survey - Click this button, yo ...

  • TP-Link TL-WR710N - page 184

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 170 - Figure 7-8 Wireless Se curity ¾ Disable Security - The wireless security function can be enabled or disabled . If disabled, the wireless stations will be able to con nect the Ro uter without encryption. But it’s strongl y recommended to choose one of the following modes to enable security. ...

  • TP-Link TL-WR710N - page 185

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 171 - Figure 7-9 ¾ WP A /WP A2-Enterprise - It’s based on Radius Server. • Ve r s i o n - you can choose the versi on of the WPA security from the pull-down list. The default setting is Automatic , which can select WP A (Wi-Fi Protected Access) or WP A2 ( WPA version 2) automatically based on t ...

  • TP-Link TL-WR710N - page 186

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 172 - 152-bit - You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is not promoted) or 16 ASCII characters. ) Note: If you do not set the key , the wireless security f unction is still disabled even if you have selected Shared Key as Authentication T ype. 7.7 DHCP Figure ...

  • TP-Link TL-WR710N - page 187

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 173 - ¾ St art IP Address - S pecify an IP address for the DHCP Server to start with when assigning IP addresses. 192.168.0.100 is the default start address. ¾ End IP Address - S pecify an IP address for the DHCP Server to end with when assigning IP addresses. 192.168.0.199 is the default end addr ...

  • TP-Link TL-WR710N - page 188

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 174 - Figure 7-13 DHCP Clie nts List ¾ Client Name - The name of the DHCP client ¾ MAC Address - The MAC address of the DHCP client ¾ Assigned IP - The IP address that the Router has allocated to the DHCP client ¾ Lease Time - The time of the DHCP cli ent leased. After the dynami c IP address ha ...

  • TP-Link TL-WR710N - page 189

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 175 - 2. Enter the MAC address (in XX-XX-XX-XX-XX-XX format.) and IP address (in dotted-decimal notation) of the computer for which yo u want to reserve an IP a ddress. 3. Click the Save button. Figure 7-15 Add or Modify an Address Reservation Entry To modify or delete an existing entry: 1. Click th ...

  • TP-Link TL-WR710N - page 190

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 176 - Figure 7-17 S torage Sharing ¾ Service Status - Indicates the Network Sharing servic e's current status. You can click the Start button to start the Storage Sharing service and click the Stop button to stop it. ¾ Volume - The volume name of the USB drive the users have access to. Volume ...

  • TP-Link TL-WR710N - page 191

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 177 - Click the Rescan button to start a new scan. Follow the instructions below to set up your router as a file server: 1. Plug an external USB har d disk drive or USB flash drive into this router. 2. Click the Rescan button to find the USB drive that has been attached to the router. 3. Click the S ...

  • TP-Link TL-WR710N - page 192

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 178 - ¾ Delete - You can delete the share folder by click Dele te . To set up your media server, please follo w the instructions below: 1. Plug an external USB hard disk drive or USB fl ash drive into this router, and then the screen will appear as shown in Figure 7-20. Figure 7-20 Media Server Set ...

  • TP-Link TL-WR710N - page 193

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 179 - Figure 7-22 Add New Folder ¾ Display Name - You can enter a display name for the share folder. ¾ Share entire partition - Choose this option and then the fo lders contained in this partition will all be shared. ¾ Folder Location - Displays the location of this folder. ¾ Select - Check the ...

  • TP-Link TL-WR710N - page 194

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 180 - can access FTP Server while Guest has read-only access to S torage Sharing and cannot access FTP Server . Figure 7-23 User Account Management Only Administrator can use a Web browser to transf er the files from a PC to the Writ able shared volume on the USB drive. T o add a new user account, p ...

  • TP-Link TL-WR710N - page 195

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 181 - ¾ Save - You can click the Save button to save your settings. ¾ Back - You can click the Back button to discard the settings and just go to the media server configuration page. ) Note: Please restart the service for the new settings to take effect. If you cannot use the new user name a nd pa ...

  • TP-Link TL-WR710N - page 196

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 182 - Figure 7-26 Diagnostic T ools ¾ Diagnostic T ool - Check the radio button to select one diagnostic tool. • Ping - This diagnostic tool troubles hoots connectivity , reachabilit y , and name resolution to a given host or gateway . • T raceroute - This diagnostic tool tests the performance ...

  • TP-Link TL-WR710N - page 197

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 183 - ¾ T raceroute Max TTL - The max num ber of hops for a T r aceroute connection. The default is 20. Click St a rt to check the connectivity of the Internet. The Diagnostic Result s page displays the result of diagnosis. If the result is similar to the following screen, the connectivity of t he ...

  • TP-Link TL-WR710N - page 198

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 184 - 2. Type the path and file name of the update file into the File field, or click the Bro w se button to locate the update file. 3. Click the Upgrade button. ) Note: 1. New firmware vers ions are posted at http://www.tp-link.com and can be downloaded for free. There is no need to upgrade the fir ...

  • TP-Link TL-WR710N - page 199

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 185 - Figure 7-30 Backup & Restore Configu ration ¾ Click the Backup button to save all configuration setti ngs as a backup file in your local computer . ¾ T o upgrade the Router's configurat ion, follow these instructions. • Click the Browse… button to locate the update file for the ...

  • TP-Link TL-WR710N - page 200

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 186 - 7.9.6 Password Choose menu “ System T ools → Pass w ord ”, and then you can change th e factory def ault user name and password of the Router in the next screen as shown in Figure 7-32. Figure 7-32 Password It is strongly recommended that you should change the factor y default user name ...

  • TP-Link TL-WR710N - page 201

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 187 - 7.9.7 System Log Choose menu “ System T ools → System Log ”, and then you can view the logs of the Router. Figure 7-33 System Log ¾ Refresh - Refresh the page to s how the latest log list. ¾ Save Log - Click to save all the logs i n a txt file. ¾ Mail Log - Click to send an email of c ...

  • TP-Link TL-WR710N - page 202

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 188 - Chapter 8. Configuration for WISP Client Router Mode This chapter will show each W eb page's key functions and the conf iguration way for WISP Client Router Mode of TL-WR710N. 8.1 Login After your successful login, you can configur e and manage the device. T here are main menus on the lef ...

  • TP-Link TL-WR710N - page 203

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 189 - Figure 8-2 S tatus ¾ Firmware V ersion - The version information of the Router ’s firmware. ¾ Hardware V ersion - The version information of the Router ’s hardware. ¾ LAN - This field displays the current settings or information for the LA N, you can configure them in the Network > L ...

  • TP-Link TL-WR710N - page 204

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 190 - • MAC Address - The physical address of the Rout er , as seen from the LAN. • IP Address - The LAN IP address of the Router . • Subnet Mask - The subnet mask associated with LAN IP address. ¾ Wireless - This field displays basic information or status for wireless function, you can confi ...

  • TP-Link TL-WR710N - page 205

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 191 - • Subnet Mask - The subnet mask associated with the W AN IP Address. Click the Release to delete the network parameters, and click the Renew button to obtaining network parameters. ¾ T raffic S tatistics - The Router ’s traf fic statistics. • Received (Bytes) - Traf fic that counted in ...

  • TP-Link TL-WR710N - page 206

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 192 - ¾ WISP Client Router - In this mode, the device enables mu ltiple users to share Internet connection from WISP . 8.5 Network Figure 8-4 The Network menu There are three submenus under the Network menu (shown in Figure 8-4): WA N , MAC Clone and LAN. Click any of them, and you will be able to ...

  • TP-Link TL-WR710N - page 207

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 193 - ¾ MTU Size - The normal MTU (Maximum T ransmission Unit) va l ue for most Ethernet networks is 1500 Bytes. It is not recomm ended that you change the default MTU Size unless required by your ISP . ¾ Use These DNS Servers - If your ISP gives you one or two DNS addresses, select Use These DNS ...

  • TP-Link TL-WR710N - page 208

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 194 - ¾ MTU Size - The normal MTU (Maximum T ransmission Unit) value for most Ethernet networks is 1500 Bytes. It is not recommended that you change the default MTU Size unless required by your ISP . ¾ Primary/Secondary DNS - (Optional) Enter one or two DNS addresses in dotted-decimal notation pro ...

  • TP-Link TL-WR710N - page 209

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 195 - • Dyn amic IP - Y ou can check this radio button to use Dynamic IP as the secondary connection to connect to the local area network provided by ISP . • St atic IP - Y ou can check this radio button to use St atic IP as the secondary connection to connect to the local area network provided ...

  • TP-Link TL-WR710N - page 210

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 196 - Figure 8-8 PPPoE Advanced Settings ¾ MTU Size - The default MTU size is “1480” bytes, which is usually fine. It is not recommended that you change the default MTU Size unless required by your ISP . ¾ Service Name/AC Name - The ser vice name and AC (Access Concentrator) name should not be ...

  • TP-Link TL-WR710N - page 211

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 197 - Figure 8-9 WAN – BigPond Cable ¾ User Name/Password - Enter the User Name and Password provided by your ISP . These fields are case-sensitive. ¾ Auth Server - Enter the authenticating serv er IP address or host name. ¾ Auth Domain - T ype in the domain suffix server name based on your loc ...

  • TP-Link TL-WR710N - page 212

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 198 - after a specified i nactivity period and re-established when you a ttempt to access the Internet again. Click the Connect button to connect immediately . Click the Disconnect button to disconnect immediately . Caution : Sometimes the connection cannot be termi nated although you specify a time ...

  • TP-Link TL-WR710N - page 213

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 199 - ¾ Connect on Demand - Y ou can configure the Router to disconnect from your Internet connection after a specified period of inactivity ( Max Idle T ime ). If your Internet connection has been terminat ed due to inactivity , Connect on Demand enables the Router to automatically re-establish yo ...

  • TP-Link TL-WR710N - page 214

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 200 - Figure 8-1 1 WAN – PPTP/Russia PPT P ¾ User Name/Password - Enter the User Name and Password provided by your ISP . These fields are case-sensitive. ¾ Dynamic IP/ S tatic IP - Choose either as you are gi ven by your ISP and enter the ISP’s IP address or the domain name. If you choose sta ...

  • TP-Link TL-WR710N - page 215

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 201 - Idle Time field. Otherwise, enter the number of minutes you want to have elapsed before your Internet connection terminates. ¾ Connect Automatically - Connect automatically after t he Router is disconnected. T o use this option, check the radio button. ¾ Connect Manually - Y ou can configure ...

  • TP-Link TL-WR710N - page 216

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 202 - Click the Save button to save your settings. ) Note: 1. Only the PC on your LAN can use the MAC Address Clone function. 2. If you change W AN MAC Addre ss when the WAN connection is PPPoE, it will not take ef fect until the connection is re-established. 8.5.3 LAN Choose menu “ Network → LA ...

  • TP-Link TL-WR710N - page 217

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 203 - 8.6 Wireless Figure 8-14 Wireless menu There are five submenus under the Wireless menu (shown in Figure 8-14): Wireless Settings , Wireless Security , Wireless MAC Filtering, Wireless Advanced and Wireless St atistics . Click any of them, and you will be able to c onfigure the corresponding fu ...

  • TP-Link TL-WR710N - page 218

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 204 - ¾ WP A-PSK/WP A2-Personal - It’s the WPA/WPA2 authentication type bas ed on pre-shared passphrase. • Ve r s i o n - you can choose the version of the WPA-PSK security on the drop-down lis t. T he default setting is Automatic , which can select WP A-PSK (Pre-shared key of WPA) or WP A2-PSK ...

  • TP-Link TL-WR710N - page 219

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 205 - • WEP Key Format - Hexadecimal and ASCII formats are provided here . Hexadecimal format stands for any combinati on of hexadecimal digits (0-9, a-f, A-F) in the specifie d length. ASCII format stands for any combination of keyboard characters in the specified length. • WEP Key (Password) - ...

  • TP-Link TL-WR710N - page 220

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 206 - 8.6.2 Wireless Security Figure 8-17 Wireless Security ¾ Disable Security - The wireless security function can be enabled or disabled . If disabled, the wireless stations will be able to con nect the Ro uter without encryption. But it’s strongl y recommended to choose one of the following mo ...

  • TP-Link TL-WR710N - page 221

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 207 - Figure 8-18 ¾ WP A /WP A2-Enterprise - It’s based on Radius Server. • Ve r s i o n - you can choose the versi on of the WPA security from the pull-down list. The default setting is Automatic , which can select WP A (Wi-Fi Protected Access) or WP A2 ( WPA version 2) automatically based on ...

  • TP-Link TL-WR710N - page 222

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 208 - 152-bit - You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is not promoted) or 16 ASCII characters. ) Note: If you do not set the key , the wireless security f unction is still disabled even if you have selected Shared Key as Authentication T ype. Be sure to clic ...

  • TP-Link TL-WR710N - page 223

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 209 - To add or modify a MAC Address Filtering entry, follo w these instructions: 1. Enter the appropriate MAC Address into the MAC Address field. The format of the MAC Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit) . For example: 00-0A-EB-B0-00-0B. 2. Give a simple description for the wi ...

  • TP-Link TL-WR710N - page 224

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 210 - Figure 8-21 Filtering Rules 8.6.4 Wireless Advanced Choose menu “ Wireless → Wireless Advanced ”, and then you can configure the a dvanced settings of your wireless network. Figure 8-22 Wireless Advanced ¾ Transmit Power - Here you can specify the transmit power of Router. You can selec ...

  • TP-Link TL-WR710N - page 225

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 21 1 - broadcast and multicast messages . When the Router has buffered broadcast or multicast messages for associated clients, it sends the next DTIM with a DTIM Interval value. You can specify the value between 1-255 Beacon Interval s. The default value is 1, which indicates the DTIM Interval is th ...

  • TP-Link TL-WR710N - page 226

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 212 - You cannot change any of the values on this page. To update this page and to show the current connected wireless stations, click on the Refresh button. If the numbers of connected wireless st ations go beyond one page, click the Next button to go to the next page and click the Previous button ...

  • TP-Link TL-WR710N - page 227

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 213 - ¾ St art IP Address - S pecify an IP address for the DHCP Server to start with when assigning IP addresses. 192.168.0.100 is the default start address. ¾ End IP Address - S pecify an IP address for the DHCP Server to end with when assigning IP addresses. 192.168.0.199 is the default end addr ...

  • TP-Link TL-WR710N - page 228

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 214 - You cannot change any of the val ues on this page. To update this page and to show the current attached devices, click the Refresh button. 8.7.3 Address Reservation Choose menu “ DHCP → Address Reserv ation ”, and then you can view and add a reserved address for clients via the next scre ...

  • TP-Link TL-WR710N - page 229

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 215 - To modify or delete an existing entry: 1. Click the Modify in the entry you want to modify . If you want to delete the entry , click the Delete . 2. Modify the information. 3. Click the Save button. Click the Enable/Disable All button to make all entries enabled/disabled. Click the Delete All ...

  • TP-Link TL-WR710N - page 230

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 216 - ¾ Volume - The volume name of the USB drive the users have access to. Volume 1-8 is mapping to USB port1, and Volume 9-16 is mapping to USB port2. ¾ Capacity - The storage capacity of the USB driver. ¾ Used - The used space of the USB driver. ¾ Free - The available space of the USB driver. ...

  • TP-Link TL-WR710N - page 231

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 217 - 3. To unplug the USB drive, click Eject Disk button first. Simply pulling USB drive out of the USB port can cause damage to the device and loss of data. 4. Mounted vol umes of each USB port are subject to the 8-volume limit. So you cannot access more than 8 volumes on the USB storage device. 5 ...

  • TP-Link TL-WR710N - page 232

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 218 - 2. Click the Start button to start the media server, an d then the screen will appear as shown in Figure 8-34. Figure 8-34 Media Server Setting 3. Click the Add share fold er button to specify a folder as t he search path of media server. The screen will then appear as shown in Figure 8-35. Fi ...

  • TP-Link TL-WR710N - page 233

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 219 - ¾ Back - Click this button to discard the se ttings and just go to the media server configuration page. 4. Click the Scan All button to scan all the share folders i mmediately. You can also select the Auto-scan , at same time, select an auto scan interval time by drop-down list. In this case, ...

  • TP-Link TL-WR710N - page 234

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 220 - Figure 8-37 Add or Modify User Account ¾ User Name - Type the user name that you want to give access to the USB drive. The user name must be composed of alphanumeric symbols not exceeding 15 charac ters in length. ¾ Password - Enter the password in the Password fiel d. The password must be c ...

  • TP-Link TL-WR710N - page 235

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 221 - There are four submenus under the Forwar ding menu (shown in Figure 8-38): Virtual Servers , Port T riggering , DMZ and UPnP . Click any of them, and you will be able to configure the corresponding function. 8.9.1 Virtual Servers Choose menu “ Forwarding → Virtual Servers ”, and then you ...

  • TP-Link TL-WR710N - page 236

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 222 - 4. Select the protocol used for this application, either TCP , UDP , or All . 5. Select the Enable to enable the virtual server . 6. Click the Save button. Figure 8-40 Add or Modify a V irtual Server Entry ) Note: If your computer or server has more than one ty pe of available service, please ...

  • TP-Link TL-WR710N - page 237

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 223 - with a pure NA T Router . Port Triggering is used for some of these applications that can work with an NA T Router . Figure 8-41 Port T riggering Once the Router is configured, the operation is as follows: 1. A local host makes an outgoing connection us ing a destination port number defined in ...

  • TP-Link TL-WR710N - page 238

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 224 - 4. Select the pr otocol used for Incoming Ports from the Incoming Protocol drop-down list, either TCP or UDP , or All . 5. Select Enable in Statu s field. 6. Click the Save button to save the new rule. Figure 8-42 Add or Modify a Port Triggering Entry T o modify or delete an existing entry: 1. ...

  • TP-Link TL-WR710N - page 239

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 225 - Figure 8-43 DMZ T o assign a computer or server to be a DMZ server: 1. Check the Enable radio button. 2. Enter the IP Address of a local host in the DMZ Host IP Address field. 3. Click the Save button. ) Note: After you set the DMZ host, the firewa ll related to the host will not work. 8.9.4 U ...

  • TP-Link TL-WR710N - page 240

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 226 - • Status - The status of the port is displayed her e. “Enabled” means that the port is still active. Otherwise, the port is inactive. Click Refresh to update the Current UPnP Settings List. 8.10 Security Figure 8-45 T he Security menu There are four submenus under t he Security menu as s ...

  • TP-Link TL-WR710N - page 241

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 227 - traffic passing through the session conforms to the protocol. SPI Firewall is enabled by factory default. If you want all the comput ers on the LAN exp osed to the outside world, you can disable it. ¾ VPN - VPN Passthrough must be enabled if you want to allow VPN tunnels using IPSec, PPTP, or ...

  • TP-Link TL-WR710N - page 242

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 228 - Figure 8-47 Advanced Security ¾ Packets Statistics Interval (5~60) - The default value is 10. Se lect a value between 5 and 60 seconds from the drop-down list. The Packets S tatistics Interval value indicates the time section of the p ackets statistics. The result of the statistics is used fo ...

  • TP-Link TL-WR710N - page 243

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 229 - ¾ Enable TCP-SYN-FLOOD Attack Filtering - Enable or Disable the TCP-SYN-FLOOD Attack Filtering. ¾ TCP-SYN-FLOOD Packets Threshold (5~3600) - The default value is 50. Enter a value between 5 ~ 3600. When the current TCP-SYN-FLOOD Packets numbers is beyond the set value, the Router will startu ...

  • TP-Link TL-WR710N - page 244

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 230 - use the password to browse the built-in web pages to perform Administrator tasks while all the others will be blocked. After click the Add button, your PC's MAC Addre ss will be placed in the list above. Click the Save button to save your settings. ) Note: If your PC is blocked but you wa ...

  • TP-Link TL-WR710N - page 245

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 231 - 8.11 Parent al Control Choose menu “ Parental Control ”, and you can configure the par ental control in the screen as shown in Figure 8-50. The Parental Control function can be used to control the internet a ctivities of the child, limit the child to access certai n websites and restrict t ...

  • TP-Link TL-WR710N - page 246

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 232 - 4. Enter the allowed domain name of the website, either the fu ll name or the keywords (e.g. google) in the Allowed Domain Name field. Any domain name with keywords in it (e.g. www.google.com ) will be allowed. 5. Select from the Effective Time drop-down list the schedule (e.g. Schedule_1) you ...

  • TP-Link TL-WR710N - page 247

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 233 - 2. Click “ Access Restriction → Schedule ” on the left to enter the Schedule Settings page. Click Add New... button to create a new schedule with Schedule Description is Schedule_1, Day is Sat and Time is all day-24 hours. 3. Click “ Parental Control ” menu on the left to go back to ...

  • TP-Link TL-WR710N - page 248

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 234 - Figure 8-54 Access Control Rule Management ¾ Enable Internet Access Restriction - Select the check box to enable the Internet Access Restriction function, so the Defaul t Filter Policy can take effect. ¾ Rule Name - Here displays the name of the rule and this name is unique. ¾ Host - Here d ...

  • TP-Link TL-WR710N - page 249

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 235 - 6. In the Action field, select Deny or Allow . 7. In the Status field, select Enabled or Disabled to enable or disable your entry. 8. Click the Save button. Click the Enable All button to enable all the rules in the list. Click the Disable All button to disable all the rules in the list. Click ...

  • TP-Link TL-WR710N - page 250

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 236 - z In Rule Name field, create a name for the rule. No te that this name should be unique, for example Rule_1. z In Host field, select Host_1. z In Target field, select Target_1. z In Schedule field, select Schedule_1. z In Action field, select Allow. z In Status field, select Enabled. z Click S ...

  • TP-Link TL-WR710N - page 251

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 237 - 2) In LAN IP Address field, enter the IP address. z If you select MAC Address, the screen shown is Figure 8-59. 1) In Host Description field, create a unique description for the host (e.g. Host_1). 2) In MAC Address field, enter the MAC address. 3. Click the Save button to complete the setting ...

  • TP-Link TL-WR710N - page 252

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 238 - Figure 8-60 Host Settings 8.12.3 Target Choose menu “ Access Control → Ta r g e t ”, you can vie w and set a T a rget list in the screen as shown in Figure 4-65. The ta rget list is necessa ry for the Access Restriction Rule. Figure 8-61 T arget Settings ¾ Target Description - Here disp ...

  • TP-Link TL-WR710N - page 253

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 239 - 2) In Domain Name field, enter the domain name, eit her the full name or the keywords (for example Google) in the bla nk. Any domain name with keywor ds in it (e.g. www.google.com ) will be blocked or allowed. You can enter 4 domain names. 3. Click the Save button. Click the Delete All button ...

  • TP-Link TL-WR710N - page 254

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 240 - Then you will go back to the Target Settings page and see the following list, Figure 8-64 T arget Settings 8.12.4 Schedule Choose menu “ Access Control → Schedule ”, you can view and set a Schedule list in the next screen as shown in Figure 8-65. The Schedule list is necessa ry for the A ...

  • TP-Link TL-WR710N - page 255

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 241 - Click the Next button to go to the next page, or click the Previous button return to the previ ous page. Figure 8-66 Advanced Schedule Settings For example : If you desire to restrict the inter net activities of host with MAC address 00-11-22-33-44-AA to access www.google.com only from 18:00 t ...

  • TP-Link TL-WR710N - page 256

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 242 - 8.13 Advanced Routing Figure 8-68 The Advanced Routing Menu There are two submenus under the Network menu (shown in Figure 4-72): St atic Routing List and Syst em Routing T able . Click any of them, and you will be able to configure the corresponding function. 8.13.1 Static Routing List Choose ...

  • TP-Link TL-WR710N - page 257

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 243 - ¾ Subnet Mask - The Subnet Mask determines which portion of an IP Address is the network portion, and which por tion is the host portion. ¾ Default Gatewa y - This is the IP Address of the gat eway device that a llows for contact between the Router a nd the network or host. 3. Select Enabled ...

  • TP-Link TL-WR710N - page 258

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 244 - 8.14 Bandwid th Control Figure 8-72 T he Bandwidth Control menu There are two submenus under the Bandw idth Control menu as shown in Figure 8-72. Click any of them, and you will be able to configure the corresponding function. T he detailed explanations for each submenu are provided below . 8. ...

  • TP-Link TL-WR710N - page 259

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 245 - Figure 8-74 Bandwidth Control Rule List ¾ Description - This is the information about the rules such as ad dress range. ¾ Egress Bandwidth - This field displa ys the max and mix uploa d bandwidth through the W AN port, the default is 0. ¾ Ingress Bandwidth - This field displays the max and ...

  • TP-Link TL-WR710N - page 260

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 246 - ¾ Egress Bandwidth - The max and the min uplo ad speed which through the WAN por t, default number is 0. ¾ Ingress Bandwidth - The max and the min download speed through the WAN po rt, default number is 0. Step 3: Click the Save button. 8.15 IP & MAC Binding Figure 8-76 T he IP & MAC ...

  • TP-Link TL-WR710N - page 261

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 247 - When you want to add or modify an IP & MAC Binding entry, you can click the Add New button or Modify button, and then you will go to the next page. This page is used for adding or modifying an IP & MAC Binding entry. Figure 8-78 IP & MAC Bin ding Setting (Add & Modify) T o add ...

  • TP-Link TL-WR710N - page 262

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 248 - Click the Enable All button to make all entries enabled. Click the Delete All button to delete all entries. 8.15.2 ARP List T o manage the computer , you could observe the computers in the LAN by checking the relationship of MAC address and IP address on the ARP list, a nd you could configure ...

  • TP-Link TL-WR710N - page 263

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 249 - name no matter what your IP address is. Before us ing this feature, you need to sign up for DDNS service providers such as www.no-ip.com , www.comexe.cn , or www .dyndns.org . The Dynamic DNS client service provider w ill give you a password or key. 8.16.1 No-IP DDNS If the dynamic DNS Service ...

  • TP-Link TL-WR710N - page 264

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 250 - Figure 8-82 Comexe.cn DDNS Settings To set up for DDNS, follow these instructions: 1. T ype the Domain Name received from your dynamic DNS service provider . 2. T ype the User Na me for your DDNS account. 3. T ype the Password for your DDNS account. 4. Click the Login button to log in to the D ...

  • TP-Link TL-WR710N - page 265

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 251 - Figure 8-83 Dyndns.org DDNS Settings To set up for DDNS, follow these instructions: 1. T ype the User Na me for your DDNS account. 2. T ype the Password for your DDNS account. 3. T ype the Domain Name you received from dynamic DNS service provider here. 4. Click the Login button to log in to t ...

  • TP-Link TL-WR710N - page 266

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 252 - St atistics. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below . 8.17.1 Time Settings Y ou can set time manually or get GMT from the Internet for the router on this page: Figure 8-85 T ime Settings ¾ ...

  • TP-Link TL-WR710N - page 267

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 253 - ¾ The router will obtain GMT automatica lly from Inte rnet if it has already connected to Internet. 8.17.2 Diagnostic Choose menu “ System T ools → Diagnostic ”, you can transact Ping or T raceroute function to check connectivity of your net work in the following screen. Figure 8-86 Dia ...

  • TP-Link TL-WR710N - page 268

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 254 - ¾ Ping Ti meout - Set the waiting time for the reply of each Ping packet. If there is no reply in the specified time, the connection is overtime. ¾ T raceroute Max TTL - The max num ber of hops for a Traceroute connection. Click St a rt to check the connectivity of the Internet. The Diagnost ...

  • TP-Link TL-WR710N - page 269

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 255 - ) Note: 1. When you upgrade the router 's firmware, you will lose current configuration settings, so make sure you backup the router’s settings before you upgrade its firmware. 2. Make sure that your computer is connect ed to the Internet through the cable when you upgrade the firmware. ...

  • TP-Link TL-WR710N - page 270

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 256 - 8.17.5 Backup & Restore This page allows you to save curr ent configuration of router as backup or rest ore the configuration file you saved before. Figure 8-90 Backup & Restore Configuration ¾ Click the Backup button to save all configuration setti ngs as a backup file in your local ...

  • TP-Link TL-WR710N - page 271

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 257 - ¾ Upgrade the firmware of the router (system will reboot automatically). ¾ Restore the router's settings to factory default (system will rebo ot automatically). 8.17.7 Password This page allows you to change the factory default user name and password of the router . Figure 8-92 Password ...

  • TP-Link TL-WR710N - page 272

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 258 - 8.17.8 System Log This page allows you to query the logs of the router . Figure 8-93 System Log ¾ Refresh - Refresh the page to s how the latest log list. ¾ Save Log - Click to save all the logs i n a txt file. ¾ Mail Log - Click to send an email of current l ogs manually according to the a ...

  • TP-Link TL-WR710N - page 273

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 259 - Figure 8-94 S tatistics ¾ Current St atistics St atus - Enable or Disable. The default va lue is disabled. T o enable, click the Enable button. If disabled, the function of DoS protection in Security settings will be ineffective. ¾ Packet s St a tistics Interval - The default value is 10. Se ...

  • TP-Link TL-WR710N - page 274

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 260 - Appendix A: FAQ 1. How do I configure the Router to access the Internet by ADSL users? 1) First, configure the ADSL Modem configured in RFC1483 bridge model. 2) Connect the Ethernet cable from your AD SL Modem to the W AN port on the Router . The telephone cord plugs into the Line port of the ...

  • TP-Link TL-WR710N - page 275

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 261 - 2. How do I configure the Router to access the Internet by Ethernet users? 1) Log in to th e Router , click the “ Network ” menu on the left of your browser , and click " WA N " subm enu. On the WA N page, select “ Dynamic IP ” for "W AN Connection T ype" , finish b ...

  • TP-Link TL-WR710N - page 276

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 262 - Figure A-4 V irtual Servers Figure A-5 Add or Modify a Virtual se rver Entry ) Note: Your opposite side should call your WAN IP , which is displayed on the “Status” page. 4) How to enable DMZ Host: Log in to the Route r , click the “ For warding ” menu on the left of your browser , and ...

  • TP-Link TL-WR710N - page 277

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 263 - 2) T o change the WEB management port number : Log in to the Router , click the “ Security ” menu on the left of your browser , and click " Remote Management " submenu. On the " Remote Management " page, type a port number except 80, such as 88, in to the "Web Mana ...

  • TP-Link TL-WR710N - page 278

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 264 - Figure A-9 Add or Modify a Virtual server Entry 5. The wireless stations cannot connect to the Router . 1) Make sure the " Enable Wireless Router Radio " is checked. 2) Make sure that the wireless stations' SSID accord with the Router's SSID. 3) Make sure the wireless stati ...

  • TP-Link TL-WR710N - page 279

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 265 - Appendix B: Configuring the PC In this section, we’ll introduce how to inst all and configure the TCP/IP correctly in Windows XP . First make sure your Ethernet Ada pter is work ing, refer to the adapter ’s manual if necessary . 1. Configure TCP/IP component 1) On the Windows taskbar , cli ...

  • TP-Link TL-WR710N - page 280

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 266 - Figure B-0-2 5) The following TCP/IP Properties window will display and the IP Address tab is open on this window by default. 6) Select Obtain an IP address automatically , Choose Obtain DNS server automatically , as shown in the Figure below: ...

  • TP-Link TL-WR710N - page 281

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 267 - Figure B-0-3 ) Note: For Windows 98 OS or before, the PC and Router may need to be restarted. 7) Click OK to keep your settings. ...

  • TP-Link TL-WR710N - page 282

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 268 - Appendix C: Specifications General S tandards IEEE 802.1 1n, 802.1 1b, 802.1 1g Protocols TCP/IP , PPPoE, DHCP , ICMP , NA T , SNTP Port One 10/100Mbps LAN/W AN port One 10/100Mbps LAN port 10BASE-T : UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100 Ω STP (maximum 100m) Cabling T yp ...

  • TP-Link TL-WR710N - page 283

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 269 - Appendix D: Glossary ¾ 802.11n - 802.11n builds upon previous 802.11 standards by adding MIMO (multiple-input multiple-output). MIMO uses mu ltiple transmitter and receiver an tennas to allow for increased data throughput via spatial multiplexing and incr eas ed range by exploiting the spatia ...

  • TP-Link TL-WR710N - page 284

    TL-WR710N 150Mbps Wireless N Mini Pocket Router - 270 - ¾ PPPoE ( P oint to P oint P rotocol o ver E thernet) - PPPoE is a protocol for connecting remote hosts to the Internet over an always-on connection by simulating a dial-up connection. ¾ SSID - A S ervice S et Id entification is a thirty-two char acter (maximum) alphan umeric key identifying ...

Manufacturer TP-Link Category Network Router

Documents that we receive from a manufacturer of a TP-Link TL-WR710N can be divided into several groups. They are, among others:
- TP-Link technical drawings
- TL-WR710N manuals
- TP-Link product data sheets
- information booklets
- or energy labels TP-Link TL-WR710N
All of them are important, but the most important information from the point of view of use of the device are in the user manual TP-Link TL-WR710N.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals TP-Link TL-WR710N, service manual, brief instructions and user manuals TP-Link TL-WR710N. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product TP-Link TL-WR710N.

Similar manuals

A complete manual for the device TP-Link TL-WR710N, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use TP-Link TL-WR710N by users. Manuals are usually written by a technical writer, but in a language understandable to all users of TP-Link TL-WR710N.

A complete TP-Link manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual TP-Link TL-WR710N - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the TP-Link TL-WR710N, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the TP-Link TL-WR710N, that we can find in the current document
3. Tips how to use the basic functions of the device TP-Link TL-WR710N - which should help us in our first steps of using TP-Link TL-WR710N
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with TP-Link TL-WR710N
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of TP-Link TL-WR710N in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning TP-Link TL-WR710N?

Use the form below

If you did not solve your problem by using a manual TP-Link TL-WR710N, ask a question using the form below. If a user had a similar problem with TP-Link TL-WR710N it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)