English dropdown-ico

Manual National Instruments TPC-2012

49 pages 0.65 mb
Download

Go to site of 49

Summary
  • National Instruments TPC-2012 - page 1

    TPC-2012/TPC-2512 User Manual TPC-2012/TPC-2512 User Manual July 2008 372052C-01 ...

  • National Instruments TPC-2012 - page 2

    Support Worldwide Technical Support and Product Info rmation ni.com National Instruments Corporate Headquarters 11500 North Mopac Expressway Aust in, Texas 78759-3504 USA Tel: 512 683 0100 Worldwide Offices Australia 1800 300 800, Austria 43 662 457990-0, Belgium 32 (0) 2 757 0020, Brazil 55 11 3262 3599, Canada 800 433 3488, China 86 21 5050 9800, ...

  • National Instruments TPC-2012 - page 3

    Important Information Warranty The TPC-2012 and TPC-2512 are warranted agains t defects in materials and wo rkmanship for a period of on e year from the date of shipment, as evidenced by receipts or other document ation. Nati onal Instruments will, at its op tion, repair or replace equi pment that pro ves to be defective during the warranty peri od ...

  • National Instruments TPC-2012 - page 4

    Compliance Compliance with FCC/Canada Radio Frequency Interference Regulations Determining FCC Class The Federal Communications Commission (FCC) has rules to protect wireless co mmunications from inte rference. The FCC places digital electronics into two classes. These classes are known as Class A (for use in industrial-commercial locations onl y) ...

  • National Instruments TPC-2012 - page 5

    Conventions The follo wing con ventions are used in this manual: » The » symbol leads you through nested menu items and dialog box options to a final action. The sequence File»Page Setup»Options directs yo u to pull down the File menu, select the Page Setup item, and select Options from the last dialog box. This icon denotes a n ote, which aler ...

  • National Instruments TPC-2012 - page 6

    © National Instruments Corporatio n vii TPC-2012/TPC-2512 User Manual Contents Chapter 1 General Information Introduction ........................ .............. .............. .............. ............... .............. .............. ...... .1 - 1 I/O Ports ............ .............. .............. ............... ........... .............. . ...

  • National Instruments TPC-2012 - page 7

    Contents TPC-2012/TPC-2512 U ser Manual viii ni.com Appendix F Accessory Kit Assembly Procedure Appendix G Touchscreen Configuration Appendix H Fuse Replacement Appendix I Technical Support and Professional Services Index ...

  • National Instruments TPC-2012 - page 8

    © National Instruments Corporatio n 1-1 TPC-2012/TPC-25 12 User Manual 1 General Information This chapter includes general i nformation about the TPC -2012/TPC-2512 Human Machine Interface (HMI). Introduction The TPC-2012/TPC-2512 touch panel co mputer, a state-of-the-art HMI based on an x 86 platform, in cludes these key features: • Fanless — ...

  • National Instruments TPC-2012 - page 9

    Chapter 1 General Information TPC-2012/TPC-2512 U ser Manual 1-2 ni.com • T wo USB 2.0 ports compliant with USB 1.0 and 1.1. • One PCI/104 slot Figure 1-1 shows the I/O port arrangement. Figure 1-1. I/O Port Arrangement For more TPC-2012/TPC-2512 specifi cations, see Appendix A, Specifications . Cleaning If you need to clean the unit, use a sof ...

  • National Instruments TPC-2012 - page 10

    © National Instruments Corporatio n 2-1 TPC-2012/TPC-25 12 User Manual 2 System Setup This chapter includes setup information for the TPC-2012/ TPC-2512. Important Safety Information Before setting up the TPC-2012/ TPC-2512, read these safety instructions carefully. Disconnect this equipment from an y A C outlet before cleaning. Use a da mp cloth. ...

  • National Instruments TPC-2012 - page 11

    Chapter 2 System Setup TPC-2012/TPC-2512 U ser Manual 2-2 ni.com If one of the following situations ar ises, ha ve service personnel check the equipment: • The power cord or plug is damaged. • Liquid has penetrated into the equipm ent. • The equipment has been exposed to moisture. • The equipment does not work well, or you cannot get i t to ...

  • National Instruments TPC-2012 - page 12

    Chapter 2 System Setup © National Instruments Corporatio n 2-3 TPC-2012/TPC-25 12 User Manual Caution Be sure system power is off before plugging in or pulling ou t the CompactFl ash card. 2. Install a CompactFlash card containing W indo ws CE, embedded W indo ws XP , or another operating syst em. 3. Connect the po wer connector to 24 VDC po wer l ...

  • National Instruments TPC-2012 - page 13

    Chapter 2 System Setup TPC-2012/TPC-2512 U ser Manual 2-4 ni.com Panel Mounting Follow these steps to mount the TPC-2012/ TPC-2512 in a panel: 1. Be sure the adhesi ve waterproof gasket on the front bezel is in position. 2. Install the TPC-20 12/TPC-2512 in the panel opening. (Refer to Appendix A, Specifications , for cutout dimensions.) 3. Hook th ...

  • National Instruments TPC-2012 - page 14

    © National Instruments Corporatio n 3-1 TPC-2012/TPC-25 12 User Manual 3 Jumpers and Connectors This chapter describes the TPC-2 012/TPC-2512 jumpers and connectors. Jumper and Connector Functions Table 3-1 lists the jumper and connector functions. Table 3-1. Mainboard Connector s and Jumpers Label Function Description CN2 LCD power LCD in ve rter ...

  • National Instruments TPC-2012 - page 15

    Chapter 3 Jumpers and Conn ectors TPC-2012/TPC-2512 U ser Manual 3-2 ni.com JP1 Panel P anel connector JP2 To u c h T o uch connector JP4 5 V/3 V PCI104 5 V/3 V select J1 DDR DDR connector J3 1*3 pin header Clear CMOS SW1 Power switch System power switch BH1 Battery R T C battery FS1 Fuse Fuse holder Table 3-1. Mainboard Connectors an d Jumpers (Co ...

  • National Instruments TPC-2012 - page 16

    Chapter 3 Jumpers and Connectors © National Instruments Corporatio n 3-3 TPC-2012/TPC-25 12 User Manual Jumper and Connector Locations Figures 3-1 and 3-2 show the ju mper and connector locations. Figure 3-1. Main Board Jumpers and Connectors ...

  • National Instruments TPC-2012 - page 17

    Chapter 3 Jumpers and Conn ectors TPC-2012/TPC-2512 U ser Manual 3-4 ni.com Figure 3-2. Main Board Jumpers and Connectors ...

  • National Instruments TPC-2012 - page 18

    © National Instruments Corporatio n A -1 TPC-2012/T PC-2512 User Manual A Specifications This appendix lists the TPC-2012/TPC-2512 sy stem specifications. Physical Weight ......... ................. .............. ............ 4.1 kg (without HDD) Cutout dimensions................ .............. .... 302 × 228 mm (suggested) ...

  • National Instruments TPC-2012 - page 19

    Appendix A Specifications TPC-2012/TPC-2512 User Manual A-2 ni.com Dimensions 11 [0.433] 7 [0.079] 237 [9.331] 311 [12.244] 301.49 [11.869] 227.49 [8.956] 2.5 [0.098] 50 [1.969] ...

  • National Instruments TPC-2012 - page 20

    Appendix A Specifications © National Instruments Corporatio n A -3 TPC-2012/TPC-2512 User Manual System Kernel CPU ....... .............. ................. .............. .... GeodeLink Control Processor LX800 500 MHz BIOS................. ............... .............. ......... Award 512 KB flash memory South bridge ................. ........... ...

  • National Instruments TPC-2012 - page 21

    Appendix A Specifications TPC-2012/TPC-2512 User Manual A-4 ni.com Backlight ......... .............. .............. ............2 CCFL Backlight lifespan ............... ................ ....50,000 h Note There may be several bright or dark pixels on the LCD. This phenomenon is normal in LCD manufacturing. T ouchscreen Touch type ................. ...

  • National Instruments TPC-2012 - page 22

    Appendix A Specifications © National Instruments Corporatio n A -5 TPC-2012/TPC-2512 User Manual Vibration ................... .............. .............. . 1 grms (5 to 500 Hz) Maximum altitude ...................... ............ 2,000 m Pollution Degree .... .............. .............. .... 2 Indoor use only Safety This product is designed t ...

  • National Instruments TPC-2012 - page 23

    Appendix A Specifications TPC-2012/TPC-2512 User Manual A-6 ni.com Environmental Management National Instruments i s committed to design ing and manu facturing products in an environmental ly responsible manner. N I recognizes that eliminating certa in hazardous substances from our products is beneficial not only to t he environment but also to NI ...

  • National Instruments TPC-2012 - page 24

    © National Instruments Corporatio n B -1 TPC-2012/TPC-2512 User Manual B Serial Port Settings This appendix describes the TPC-2012/TPC-2512 serial port settings. COM1/COM2/COM3 Connector Pinout The follo wing fi gure and t able sh o w the COM1/COM2/COM3 connector pinout. Note COM1 and COM2 support on ly half-duplex (maximum baud rate: 115.2 Kbps). ...

  • National Instruments TPC-2012 - page 25

    Appendix B Serial Port Settings TPC-2012/TPC-2512 User Manual B-2 ni.com COM4 Connector Pinout and Settings The TPC-2012/TPC-2512 COM4 serial port is adjustable. Y ou can set it to RS-232, RS-422, or RS-485, and it has au to data fl o w control capability . In other words, the TPC-2012/TPC-2512 can automatically de tect the data flow direction at t ...

  • National Instruments TPC-2012 - page 26

    Appendix B Seria l Port Settings © National Instruments Corporatio n B -3 TPC-2012/TPC-2512 User Manual PIN RS-232 RS-422 RS-485 1 NDCD TX– D– 2 NRX TX+ D+ 3 NTX RX+ 4 NDTR RX– 5 GND GND GND 6 NDSR 7 NR TS 8 NCTS 9 NRI ...

  • National Instruments TPC-2012 - page 27

    © National Instruments Corporatio n C -1 TPC-2012/TPC-2512 User Manual C W atchdog T imer Programming This appendix explains the TPC-2012/TPC-2512 watchdog timer programming. Over view Y ou can use the TPC-2012/TPC-2 512 watchdog timer to monitor system software operation and ta k e correcti ve action if the software fails to function after the pr ...

  • National Instruments TPC-2012 - page 28

    Appendix C W atchdog T imer Programming TPC-2012/TPC-2512 User Manual C-2 ni.com Figure C-1 describes the watchdog timer program ming procedure, and T ab le C-1 describes the watchdog timer registers. Figure C-1. W atchdog Timer Programming Pr ocedure Unlock W 83 627 S elect W a tchdog Timer Regi s ter En ab le W a tchdog Timer F u nction U s e W a ...

  • National Instruments TPC-2012 - page 29

    Appendix C W atchdog T imer Programmin g © National Instruments Corporatio n C -3 TPC-2012/TPC-2512 User Manual Table C-1. Watchdog T imer Registers Address of Register (2E) Attribute Description Read/Write V alue (2F) and descriptio n — 87 (hex) — Write this ad dress twice to I/O address port 2E (hex) to unlock the W83627HF . 07 (hex) Write W ...

  • National Instruments TPC-2012 - page 30

    Appendix C W atchdog T imer Programming TPC-2012/TPC-2512 User Manual C-4 ni.com Example Programs Example 1: Enable the W atchdog T imer and Set 10 s as the T imeout Inter val ;----------------------------------- ------------------------ Mov dx,2eh ; Unlock W83627HF Mov al,87h Out dx,al Out dx,al ;----------------------------------- --------------- ...

  • National Instruments TPC-2012 - page 31

    Appendix C W atchdog T imer Programmin g © National Instruments Corporatio n C -5 TPC-2012/TPC-2512 User Manual Example 2: Enable the W atchdog T imer and Set 5 Min as the T imeout Inter val ;----------------------------------- ------------------------ Mov dx,2eh ; unlock W83627H Mov al,87h Out dx,al Out dx,al ;----------------------------------- ...

  • National Instruments TPC-2012 - page 32

    Appendix C W atchdog T imer Programming TPC-2012/TPC-2512 User Manual C-6 ni.com Example 3: Enable the Mouse to Reset the W atchdog T imer ;----------------------------------- ------------------------ Mov dx,2eh ; unlock W83627H Mov al,87h Out dx,al Out dx,al ;----------------------------------- ------------------------ Mov al,07h ; Select register ...

  • National Instruments TPC-2012 - page 33

    Appendix C W atchdog T imer Programmin g © National Instruments Corporatio n C -7 TPC-2012/TPC-2512 User Manual Example 4: Enable the Keyboard to Reset the W atchdog T imer ;----------------------------------- ------------------------ Mov dx,2eh ; unlock W83627H Mov al,87h Out dx,al Out dx,al ;----------------------------------- ------------------ ...

  • National Instruments TPC-2012 - page 34

    Appendix C W atchdog T imer Programming TPC-2012/TPC-2512 User Manual C-8 ni.com Example 5: Generate a T imeou t Signal without Timer Counting ;----------------------------------- ------------------------ Mov dx,2eh ; unlock W83627H Mov al,87h Out dx,al Out dx,al ;----------------------------------- ------------------------ Mov al,07h ; Select regi ...

  • National Instruments TPC-2012 - page 35

    © National Instruments Corporatio n D-1 TPC-2012/TPC-2512 User Manual D W atchdog T imer Programming on WinCE (TPC-2012) W indo ws CE includes a watchdog timer for the TPC-2012/ TPC-2512. Y o u can access the timer through the WI N32 API. The TP C-2012/TPC-2512 includes a WDT driver , WDT1 :, for enabling/disabling t he watchdog timer . Y ou must ...

  • National Instruments TPC-2012 - page 36

    Appendix D W atchdog Timer Pr ogramming on Win CE (TPC-2012) TPC-2012/TPC-2512 U ser Manual D-2 ni.com • dwIoControlCode (in) Specifies the operation contro l code. This v alue identifies the specific operation to be performed a nd the type of de vice on which the operation is to be performed. No specific v alues are defined for the dwIoControlCo ...

  • National Instruments TPC-2012 - page 37

    Appendix D W atchdog T imer Progr amming on WinCE (TPC-2012) © National Instruments Corporatio n D-3 TPC-2012/TPC-2512 User Manual How to Use the Control Codes There are six control codes for the WDT dri ver operation codes. IOCTL _WDT_ENABLE Enables the application watchdog timer . By default, if the watchdog timer is enabled, the WDT dri ver aut ...

  • National Instruments TPC-2012 - page 38

    Appendix D W atchdog Timer Pr ogramming on Win CE (TPC-2012) TPC-2012/TPC-2512 U ser Manual D-4 ni.com • lpOutBuffer : The D WORD points to your watchdog time setting. The watchdog time settings are: • nOutBufferSize : unused IOCTL_WDT_SETTIMEOUT Sets the watchdog time setting. • lpInBuffer : The DW ORD points t o your watchdog time setting. ...

  • National Instruments TPC-2012 - page 39

    Appendix D W atchdog T imer Progr amming on WinCE (TPC-2012) © National Instruments Corporatio n D-5 TPC-2012/TPC-2512 User Manual IOCTL_WDT_REBOOT If you want your application to trigger the watchdog, use IOCTL_WDT_REBOOT to notify the watchdog driv er timer (WDT). Otherwise, the WDT trigg ers itself automatically . • lpInBuffer : unused • nI ...

  • National Instruments TPC-2012 - page 40

    Appendix D W atchdog Timer Pr ogramming on Win CE (TPC-2012) TPC-2012/TPC-2512 U ser Manual D-6 ni.com While (1) { // do your job here. Sleep(8000); DeviceIoControl(m_hWDT, IOCTL_WDT_ST ROBE, NULL,0, NULL, 0, &dwTemp, NULL); } DeviceIoControl(m_hWDT, IOCTL_WDT_DI SABLE, NULL, , NULL, 0, &dwTemp, NULL); CloseHandle(m_hWDT); ...

  • National Instruments TPC-2012 - page 41

    © National Instruments Corporatio n E-1 TPC-2012/TPC-25 12 User Manual E Features in Windows XP Embedded (TPC-2512) The TPC-2512 supports the Windo ws XP Embedded platform (comm only abbrev iated XPe), which is a componentized v ersion of the W indo ws XP Professional edition. This appendix explains the v ersion information and the EWF utility for ...

  • National Instruments TPC-2012 - page 42

    © National Instruments Corporatio n F-1 TPC-2012/TPC-25 12 User Manual F Accessor y Kit Assembly Procedure This appendix explains ho w to connect to a CD-R OM via the CompactFlash slot. CompactFlash to IDE T ransfer Kit Assembly Follo w these steps to connect to a CD-R OM via the CompactFlash slot: 1. Connect the IDE cable to the adapter board. 2. ...

  • National Instruments TPC-2012 - page 43

    © National Instruments Corporatio n G-1 TPC-2012/TPC-2512 User Manual G T ouchscreen Configuration This appendix explains ho w to configure the TPC-2012/TPC-2512 touchscreen using the PenMount Control Panel. T ouchscreen Calibration (TPC-2012) T o cali brate the TPC-2012, go to Start» Control Panel»St ylus , which displays the Stylus Properties ...

  • National Instruments TPC-2012 - page 44

    © National Instruments Corporatio n H-1 TPC-2012/TPC-2512 User Manual H Fuse Replacement Caution Do not replace the fuse unless it is damaged. Do not replace the fuse with a differently rated fuse. For more information, see the fuse specifications in Appendix A, Specifications . Follo w these steps to replace the fuse: 1. R em ove t he fu se c ove ...

  • National Instruments TPC-2012 - page 45

    © National Instruments Corporatio n I-1 TPC-2012/TPC-2512 User Manu al I T echnical Support and Professional Ser vices Visit the following sections of the award-winning National Instruments Web site at ni.com for technical support and professional services: • Support —T echnical support resou rces at ni.com/support include the following: – S ...

  • National Instruments TPC-2012 - page 46

    Appendix I T echnical Support and Professional Services TPC-2012/TPC-2512 U ser Manual I-2 ni.com If you searched ni.com and could not find the answers you need, contact your local off ice or NI corporate h eadquarters. Phone numbers for our worldwide of f ices are listed at the front of this manual. Y ou also can visit the W orldw ide Off ices sec ...

  • National Instruments TPC-2012 - page 47

    © National Instruments Corporation Index-1 TPC-2012/T PC-2512 User Manual Index A accessory kit assembly, F-1 C CE compliance specif ications, A-5 cleaning, 1-2, A-6 COM1/COM2/COM3 connector pinout , B-1 COM4 connector pinout and set tings, B-2 CompactFlash to IDE transfer kit assembly, F-1 connectors, 3-1 function descriptions (table), 3 -1 locat ...

  • National Instruments TPC-2012 - page 48

    Index TPC-2012/TPC-2512 U ser Manual Index-2 ni.com J jumpers, 3-1 function descriptions (table), 3 -1 locations (table), 3-3, 3-4 K Kno wledgeBase, I-1 L LCD specifications, A-3 M mercury disposal and recycling specifications, A-6 N National Instru ments support and serv ices, I-1 P panel mounting, 2-4 physical specifications, A-1 pinouts COM1/COM ...

  • National Instruments TPC-2012 - page 49

    Index © National Instruments Corporation Index-3 TPC-2012/T PC-2512 User Manual electromagnetic compatibility specifications, A-5 en vironmental management specifications, A-6 en vironmental specif ications, A-4 fuse replacement, H-1 specifications, A-4 I/O ports, 1-1 introduction, 1-1 jumpers, 3-1 LCD specifi cations, A-3 mercury disposal and rec ...

Manufacturer National Instruments Category Network Card

Documents that we receive from a manufacturer of a National Instruments TPC-2012 can be divided into several groups. They are, among others:
- National Instruments technical drawings
- TPC-2012 manuals
- National Instruments product data sheets
- information booklets
- or energy labels National Instruments TPC-2012
All of them are important, but the most important information from the point of view of use of the device are in the user manual National Instruments TPC-2012.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals National Instruments TPC-2012, service manual, brief instructions and user manuals National Instruments TPC-2012. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product National Instruments TPC-2012.

Similar manuals

A complete manual for the device National Instruments TPC-2012, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use National Instruments TPC-2012 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of National Instruments TPC-2012.

A complete National Instruments manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual National Instruments TPC-2012 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the National Instruments TPC-2012, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the National Instruments TPC-2012, that we can find in the current document
3. Tips how to use the basic functions of the device National Instruments TPC-2012 - which should help us in our first steps of using National Instruments TPC-2012
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with National Instruments TPC-2012
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of National Instruments TPC-2012 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning National Instruments TPC-2012?

Use the form below

If you did not solve your problem by using a manual National Instruments TPC-2012, ask a question using the form below. If a user had a similar problem with National Instruments TPC-2012 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)