English dropdown-ico

Manual Sanyo PLC-XU88

77 pages 7.2 mb
Download

Go to site of 77

Summary
  • Sanyo PLC-XU88 - page 1

    Owner ’ s Manual Network Supported □   Wireless LAN IEEE802.1 1b/g □   Wired LAN 100-Base-TX/10-Base-T Memory V iewer □   SD Card Memory Viewer * Refer to the owner ’s manuals below for details about network and memory viewer function. ■ Network Set-up and Operation ■ Memory viewer Multimedia ...

  • Sanyo PLC-XU88 - page 2

    2 Features and Design ...

  • Sanyo PLC-XU88 - page 3

    3 Features and Design This Multimedia Projector is designed with the most advanced technology for portability , durability , and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology . ◆ Compact Design This projector is designed compact in size and ...

  • Sanyo PLC-XU88 - page 4

    4 T able of Contents T rademarks Each name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation. Features and Design . . . . . . . . . . . . . . . . . . .3 T able of Contents . .................... . 4 T o the Owner . ......................... 5 Safety Instructions . ................ ...

  • Sanyo PLC-XU88 - page 5

    5 T able of Contents T o the Owner C A UT IO N: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) . NO USER-SERVICEABLE P ARTS INSIDE EXCEPT LAMP REPLACEMENT . REFER SER VICING T O QUALIFIED SER VICE PERSONNEL. TH IS S YM BO L I ND IC A TE S TH A T D A NG ER OU S VOL T AGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN TH ...

  • Sanyo PLC-XU88 - page 6

    6 Safety Instructions All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Follow all warnings and instructions m ...

  • Sanyo PLC-XU88 - page 7

    7 Safety Instructions Safety Instructions Openings in the cabinet are provided for ventilation. T o ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. CAUTION Hot air is exhausted from the exhaust vent. When using or installing the projector , the following precautions should ...

  • Sanyo PLC-XU88 - page 8

    8 Compliance Federal Communications Commission Notice Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and ...

  • Sanyo PLC-XU88 - page 9

    9 Compliance Part Names and Functions ① ⑤ ⑥ ③ ② Front Back ⑭ ⑦ ⑩ ⑨ ⑧ ⑥  ④ ⑪ ⑬ ⑫ ⑮ ⑯ ⑰ ⑱ ① Infrared Remote Receiver ② Focus Ring ③ Zoom Lever ④ Projection Lens ⑤ Lens Cap (See page 59 for attaching.) ⑥ Air Intake V ent ⑦ Exhaust V ents CAUTION Hot air is exhausted from the exhaust vent. Do not p ...

  • Sanyo PLC-XU88 - page 10

    10 Part Names and Functions Rear T erminal ⑤ S-VIDEO IN Connect the S-VIDEO output signal from video equipment to this jack (p.19). ⑥ AUDIO IN Connect the audio output signal from video equipment connected to ⑤ or ⑫ to this jack. For a mono audio signal (a single audio jack), connect it to the L (MONO) jack (p.19). ⑪ COMPUTER/COMPONENT AU ...

  • Sanyo PLC-XU88 - page 11

    1 1 Part Names and Functions Part Names and Functions T op Control ⑤ LAMP REPLACE indicator Lights yellow when the projection lamp reaches its end of life (pp.60, 68). ⑩ W ARNING TEMP . indicator – Lights red when the projector detects an abnormal condition. – Blinks red when the internal temperature of the projector exceeds the operating r ...

  • Sanyo PLC-XU88 - page 12

    12 Part Names and Functions ㉕ NETWORK button Select the Network input. See owner's manual “Network Set-up and Operation” and owner's manual of Memory viewer .  Note: T o ensure safe operation, please observe the following precautions: – Do not bend, drop, or expose the remote control to moisture or heat. – For cleaning, use a ...

  • Sanyo PLC-XU88 - page 13

    13 Part Names and Functions Part Names and Functions Spotlight Pointer Function Pointer Laser Pointer Function LASER button PRESENT A TION POINTER button This remote control emits a laser beam from the laser light window . Press the LASER button to activate the laser pointer . The signal emission indicator lights red and the red laser beam is emitt ...

  • Sanyo PLC-XU88 - page 14

    14 PRESENT A TION POINTER button R-CLICK button L-CLICK button While pressing the MENU button, press the IMAGE b u t t o n n u m b e r o f t i m e s corresponding to the remote control code. MENU button IMAGE button RESET/ON/ALL-OFF switch Remote Control Code Remote Control Code Number of Times Pressing IMAGE Button Code 1 1 Code 2 2 Code 3 3 Code ...

  • Sanyo PLC-XU88 - page 15

    15 Part Names and Functions Part Names and Functions Adjustable Feet T o ensure safe operation, please observe the following precautions :  ● Usetwo(2) AAA orLR03typealkalinebatteries.  ● Alwaysreplacebatteriesinsets.  ● Donotuseanewbatterywithausedbattery .  ...

  • Sanyo PLC-XU88 - page 16

    16 Positioning the Projector For projector positioning, see the figures below . The projector should be set perpendicularly to the plane of the screen. Installation  Notes: • The brightness in the room has a great influence on picture quality . It is recommended to limit ambient lighting in order to obtain the best image. • All measurements ...

  • Sanyo PLC-XU88 - page 17

    17 Installation Installation Connecting the AC Power Cord This projector uses nominal input voltages of 100-120 V or 200–240 V AC and it automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor . T o reduce the risk of electrical shock, do not plug into any other t ...

  • Sanyo PLC-XU88 - page 18

    18 Installation Connecting to a Computer Cables used for connection • VGA Cable (Mini D-sub 15 pin) * • DVI-VGA Cable • DVI Cable • USB Cable • Audio Cables (*One cable is supplied; other cables are not supplied with the projector .)  Notes: • Input sound to the COMPUTER/COMPONENT AUDIO IN terminal when using the COMPUTER IN 1/DVI-I ...

  • Sanyo PLC-XU88 - page 19

    19 Installation Installation Connecting to V ideo Equipment Cables used for connection • Video and Audio Cable (RCA x 3) • S-VIDEO Cable • Audio Cable (Cables are not supplied with the projector . ) Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables.  Notes: • When the AUDIO OU ...

  • Sanyo PLC-XU88 - page 20

    20 Installation Connecting to Component V ideo Equipment Cables used for connection • Audio Cables • Scart-VGA Cable • Component Cable • Component-VGA Cable (Cabels are not supplied with this projector .)  Notes: • When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available. • See page 72 for ordering opt ...

  • Sanyo PLC-XU88 - page 21

    21 Installation 16 The preparation display will disappear after 30 seconds. (See page 52 for Lamp control status.) Lamp control status T urning On the Projector Connect the projector ’s AC power cord into an AC outlet. The POWER indicator lights red. Open the lens cap (see pages 9,59). Press the POWER ON/SY AND-BY button on the top control or on ...

  • Sanyo PLC-XU88 - page 22

    22 TO MAINT AIN THE LIFE OF THE LAMP , ONCE YOU TURN THE PROJECTOR ON, W AIT A T LEAST FIVE MINUTES BEFORE TURNING IT OFF . “Power off?” disappears after 4 seconds. T urning Off the Projector Press the POWER ON/ST AND-BY button on the top control or on the remote control, and “Power of f?” appears on the screen. Press the POWER ON/ST AND-BY ...

  • Sanyo PLC-XU88 - page 23

    23 Basic Operation Basic Operation How to Operate the On-Screen Menu The projector can be adjusted or set via the On-Screen Menu. For each adjustment and setting procedure, refer to the respective sections in this manual. Use the Point ◄► buttons to select a Menu icon. Use the Point ▲▼ buttons to select an item in the selected menu. Press t ...

  • Sanyo PLC-XU88 - page 24

    24 Menu Bar PC System Menu Image Adjust Menu Used to adjust computer image [Contrast/Brightness/ Color temp./White balance (R/G/B)/ Sharpness/Gamma] (pp.36–37). Setting Menu Used to adjust the volume or mute the sound (p.26). Image Select Menu Used to select an image mode among Dynamic, Standard, Real, Blackboard(Green), and Image 1– 4 (p.35). ...

  • Sanyo PLC-XU88 - page 25

    25 Basic Operation Basic Operation Rotate the Zoom Lever to zoom in and out. Rotate the Focus Ring to adjust the focus of the image. Zoom and Focus Adjustment If a projected picture still has keystone distortion after pressing the AUTO SETUP/CANCEL button on the top co ntr ol o r the AUTO S ET/ CA NCE L bu tto n on th e rem ot e control, correct th ...

  • Sanyo PLC-XU88 - page 26

    26 Sound Adjustment 1 2 Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to the Sound Menu icon. Press the VOLUME+/– buttons on the top control or on the remote control to adjust the volume. The volume dialog box appears on the screen for a few seconds. Press the MUTE button on the re ...

  • Sanyo PLC-XU88 - page 27

    27 Basic Operation Basic Operation Remote Control Operation Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu. Press the COMPUTER, VIDEO, or NETWORK button on the remote control to select the input source ...

  • Sanyo PLC-XU88 - page 28

    28 Basic Operation black out → the captured image → normal → • • • • • Press the NO SHOW button on the remote control to black out the image. T o restore to normal, press the NO SHOW button again or press any other button. When a projected image is captured and set as “User” in the Logo selection (see page 48), the screen change ...

  • Sanyo PLC-XU88 - page 29

    29 Basic Operation Choose either Computer 1 (Analog) or Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control. Before using these buttons, correct input source should be selected through Menu operation as described below . Press the MENU button to display the On-Screen Menu. Use the Point ◄ ...

  • Sanyo PLC-XU88 - page 30

    30 Computer Input Choose Computer 1(Digital) by pressing the INPUT button on the top control or press the COMPUTER button on the remote control. Before using these buttons, correct input source should be selected through Menu operation as described below . Press the MENU button to display the On-Screen Menu. Use the Point ◄ ► buttons to move th ...

  • Sanyo PLC-XU88 - page 31

    31 Computer Input Computer Input The Auto PC Adjustment function operates to adjust the projector . PC System Menu The PC System Menu icon Selected system is displayed. Systems in this dialog box can be selected. PC System Menu Customized Mode (1–5) set in the PC Adjust Menu (pp.33–34). Computer System Selection This projector automatically tun ...

  • Sanyo PLC-XU88 - page 32

    32 Computer Input Auto PC Adjustment function is provided to automatically adjust Fine sync, T otal dots, Horizontal and V ertical positions to conform to your computer . Move the red frame pointer to Auto PC Adj. and press the SELECT button. “Please wait...” appears while the Auto PC adjustment is in process. PC Adjust Menu PC Adjust Menu icon ...

  • Sanyo PLC-XU88 - page 33

    33 Computer Input Computer Input PC Adjust Menu Manual PC Adjustment Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector . Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has five independent memory areas to store those parame ...

  • Sanyo PLC-XU88 - page 34

    34 Computer Input V acant Val u e s o f “ T o t a l d o t s ” , “Horizontal”, “V ertical”, “Display area H”, and “Display area V”. Close this dialog box. T o store adjusted data T o clear adjusted data This Mode has stored parameters. Move the red frame pointer to the desired item and press the SELECT button. Us e t h e Po i nt ...

  • Sanyo PLC-XU88 - page 35

    35 Computer Input Computer Input Move the red frame pointer to the desired image mode and press the SELECT button. The selected image mode is check marked. Image Select Menu Normal picture mode preset on the projector . Standard Picture mode with improved halftone for graphics. Real For the image projected on a blackboard. See above for further des ...

  • Sanyo PLC-XU88 - page 36

    36 Computer Input Use the Point ◄► buttons to adjust the setting value. Move the red frame pointer to the desired item and then press the SELECT button. Image Adjust Menu Image Adjust Menu icon Selected Image mode Image Adjustment Reset Press the MENU button to display the On-Screen Menu. Use the Point ◄ ► buttons to move the red frame poin ...

  • Sanyo PLC-XU88 - page 37

    37 Computer Input Computer Input Store Exit the Image Adjust Menu. Quit Store icon This projector has the picture screen resize function, which enables you to customize the image size. Screen Menu Screen Size Adjustment Provide the image to fit the screen size. Normal T rue Provide the image in its original size. When the original image size is lar ...

  • Sanyo PLC-XU88 - page 38

    38 Computer Input Select Digital zoom +. The On-Screen Menu disappears and “D. zoom +” appears. Press the SELECT button to expand the image size. Use the Point ▲▼◄► b utto ns t o p an t he image. The Panning function can work only when the image is larger than the screen size. A projected image can be also expanded by pressing the D.ZOO ...

  • Sanyo PLC-XU88 - page 39

    39 Computer Input Choose Video by pressing the INPUT button on the top control or the VIDEO button on the remote control. Before using these buttons, correct input source should be selected through menu operation as described below . Use the Point ▲ ▼ buttons to move the red arrow pointer to Video and then press the SELECT button to display the ...

  • Sanyo PLC-XU88 - page 40

    40 V ideo Input Choose Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control. Before using these buttons, correct input source should be selected through Menu operation as described below . 1 Computer 2 Input Menu U s e th e P o i n t ▲ ▼ buttons to move the red arrow pointer to Computer 2 ...

  • Sanyo PLC-XU88 - page 41

    41 V ideo Input V ideo Input V ideo System Selection Press the MENU button to display the On-Screen Menu. Use the Point ◄ ► buttons to move the red frame pointer to the A V System Menu icon. 1 A V System Menu (Video or S-Video) A V System Menu (Component) U s e th e P o i n t ▲ ▼ buttons to move the red arrow p o i n t e r t o t h e d e s i ...

  • Sanyo PLC-XU88 - page 42

    42 V ideo Input Move the red frame pointer to the desired image mode and press the SELECT button. The selected image mode is check marked. Image Select Menu Standard Cinema Blackboard(Green) For viewing with the user preset image mode in the Image Adjust Menu (see pages 43–44). Image1–4 Image Select Menu icon Select the desired image mode from ...

  • Sanyo PLC-XU88 - page 43

    43 V ideo Input V ideo Input Image Adjustment Press the MENU button to display the On-Screen Menu. Use the Point ◄ ► buttons to move the red frame pointer to the Image Adjust Menu icon. 1 2 Use the Point ▲ ▼ buttons to move the red frame pointer to the desired item and then press the SELECT button to display the adjustment dialog box. Use t ...

  • Sanyo PLC-XU88 - page 44

    44 V ideo Input Use the Point ◄► buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15). Gamma Press the Point ◄ button to decrease the sharpness of the image; press the Point ► button to increase the sharpness of the image (from 0 to 15). Sharpness An interlaced video signal can be displayed in progressive ...

  • Sanyo PLC-XU88 - page 45

    45 V ideo Input V ideo Input This projector has the picture screen resize function, which enables you to customize the image size. Normal Screen Size Adjustment Screen Menu Press the MENU button to display the On-Screen Menu. Use the Point ◄ ► buttons to move the red frame pointer to the Screen Menu icon. 1 Use the Point ▲ ▼ buttons to move ...

  • Sanyo PLC-XU88 - page 46

    46 Language The language used in the On-Screen Menu is available in English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Finnish, Polish, Hungarian, Romanian, Russian, Chinese, Korean, and Japanese. Set the red frame pointer to the item and press the SELECT button. Press the SELECT button at Language, then the Language Menu appear ...

  • Sanyo PLC-XU88 - page 47

    47 Setting Setting Display Blue back When this function is “On,” a blue image is displayed while the input signal is not detected. Keystone This function is used to store or reset the keystone correction when the AC power cord is unplugged. Use the Point ◄► buttons to switch between each option. St or e .... .. .. Keep the keystone correcti ...

  • Sanyo PLC-XU88 - page 48

    48 Setting Select [Y es] to capture the projected image. Select [Y es] to stop capturing. Capture Logo (Logo and Logo PIN code lock settings) Logo select This function allows you to customize the screen logo with Logo select, capture, and Logo PIN code lock functions.  Note: • When “On” is selected in the Logo PIN code lock function, Logo ...

  • Sanyo PLC-XU88 - page 49

    49 Setting Logo PIN code lock Setting This function prevents an unauthorized person from changing the screen logo. Off ............ The screen logo can be changed freely from the Logo Menu (p.48). On ............ The screen logo cannot be changed without a Logo PIN code. If you want to change the Logo PIN code lock setting, press the SELECT button ...

  • Sanyo PLC-XU88 - page 50

    50 Setting Ceiling Rear Ceiling When this function is set to “On,” the picture will be top/ bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector . Rear When this function is set to “On,” the picture will be left/right reversed. This function is used to project the image from rear of the ...

  • Sanyo PLC-XU88 - page 51

    51 Setting Setting Power management T ime left before Lamp is off. Power management For reducing power consumption as well as maintaining the lamp life, the Power management function turns of f the projection lamp when the projector is not operated for a certain period. If the input signal is interrupted and no button is pressed for more than 30 se ...

  • Sanyo PLC-XU88 - page 52

    52 Setting On start Remote control Remote control Pointer When this function is set to “On,” the projector will be automatically turned on just by connecting the AC power cord to a wall outlet.  Note: • Be sure to turn off the projector properly (see “T urning Off the Projector” on page 22). If the projector is turned off in the incorr ...

  • Sanyo PLC-XU88 - page 53

    53 Setting Setting Key lock Key lock Security (Key lock and PIN code lock) PIN code lock PIN code lock This function locks the top control and remote control buttons to prevent operation by unauthorized persons. ..... Unlocked. ..... Lock the operation of the top control. T o unlock, use the remote control. ..... lock the operation of the remote co ...

  • Sanyo PLC-XU88 - page 54

    54 Setting Change the PIN code lock setting Use the Point ◄► buttons to switch between the options. Use the Point ◄► buttons to select Off, On1, or On2 and then move the pointer to “Quit” with the Point ▼ button. Press the SELECT button to close the dialog box. Change the PIN code lock setting Enter a PIN code Use the Point ▲▼ but ...

  • Sanyo PLC-XU88 - page 55

    55 Setting This function provides the following options in the cooling fans’ operation when the projector is turned of f (p.22). L1 ...... Normal operation L2 ...... Slower and lower-sound than the normal operation (L1), but it takes more time to cool the projector down. Fan Setting Choose the running speed of cooling fans from the following opti ...

  • Sanyo PLC-XU88 - page 56

    56 Setting Factory default This function returns all setting values except for the user logo, PIN code lock, Logo PIN code lock, lamp counter , and filter counter to the factory default settings. Exit the Setting Menu. Quit Select Factory default and this box appears. Select [Y es], and the next box appears. Select [Y es] to activate it. Factory de ...

  • Sanyo PLC-XU88 - page 57

    57 Setting The W arning T emp. indicator shows the state of the function which protects the projector . Check the state of the W arning T emp. indicator and the POWER indicator to take proper maintenance. W ARNING TEMP . indicator The projector is shut down and the W arning T emp. indicator is blinking red. When the temperature inside the projector ...

  • Sanyo PLC-XU88 - page 58

    58 Maintenance and Cleaning T urn of f the projector , and unplug the AC power cord from the AC outlet. T urn the projector over and remove the air filters by pulling the latches upward. 1 2 Filter prevents dust from accumulating on the optical elements inside the projector . Should the air filters become clogged with dust particles, it will reduce ...

  • Sanyo PLC-XU88 - page 59

    59 Maintenance and Cleaning Maintenance and Cleaning Cleaning the Projector Cabinet Cleaning the Projection Lens Unplug the AC power cord before cleaning. Gently wipe the projection lens with a cleaning cloth that contains a small amount of non-abrasive camera lens cleaner , or use a lens cleaning paper or commercially available air blower to clean ...

  • Sanyo PLC-XU88 - page 60

    60 Maintenance and Cleaning When the projection lamp of the projector reaches its end of life, the Lamp replacement icon appears on the screen and LAMP REPLACE indicator lights yellow . Replace the lamp with a new one promptly . The timing when the LAMP REPLACE indicator should light is depending on the lamp mode. Follow these steps to replace the ...

  • Sanyo PLC-XU88 - page 61

    61 Maintenance and Cleaning Maintenance and Cleaning This projector uses a high-pressure lamp which must be handled carefully and properly . Improper handling may result in accidents, injury , or create a fire hazard. ● Lamp life may differ from lamp to lamp and according to the environment of use. There is no guarantee of the same life for each ...

  • Sanyo PLC-XU88 - page 62

    62 Problem: – Solutions No power – Plug the power cord of the projector into the AC outlet. – See if the POWER indicator lights red. – Wait until the POWER indicator stops blinking to turn on the projector again. The projector can be turned on after the POWER indicator turns red. See page 21. – Check the W ARNING TEMP .indicator . If the ...

  • Sanyo PLC-XU88 - page 63

    63 Appendix Appendix No image – Check the connection between your computer or video equipment and the projector . See pages 18-20. – See if the input signal is correctly output from your computer . Some laptop computers may need to change the setting for monitor output when connecting to a projector . See your computer’s instruction manual fo ...

  • Sanyo PLC-XU88 - page 64

    64 Appendix The image is distorted or runs off. – Check "PC adjustment" menu or "Screen" menu and adjust them. (page 33-34, 37-38) PIN code dialog box appears – PIN code lock is being set. Enter a PIN code (the “1234” or numbers at start-up . you have set). See pages 21, 53–54. Page Up/Down function does – Make sure ...

  • Sanyo PLC-XU88 - page 65

    65 Appendix W ARNING : High voltages are used to operate this projector . Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center . Specify the model number and explain about the problem. We will advise you how to obtain serv ...

  • Sanyo PLC-XU88 - page 66

    66 Appendix Menu T ree SVGA 1 Mode 1 Mode 2 - - - - Auto PC Adj. T otal dots Horizontal V ertical Display area H Display area V Reset Dynamic Real Blackboard (Green) Image 1 Image 2 Image 3 Image Adjust Contrast Brightness Color temp. Red Gamma Store Quit Normal T rue Digital zoom – Full 0–63 0–63 Computer Input PC Adjust Mode 1 Mode 2 Mode 3 ...

  • Sanyo PLC-XU88 - page 67

    67 Appendix Auto P AL SECAM NTSC NTSC 4.43 P AL-M P AL-N Video Input Auto 1080i 1035i 720p 575p 480p 575i 480i Dynamic Cinema Blackboard (Green) Image 1 Image 2 Image 3 Quit Normal 0–63 0–63 Off Setting Image Select System (2) System (3) Image Adjust Contrast Brightness Color T int Red Green Blue Sharpness Reset Store Gamma Progressive 0–63 0 ...

  • Sanyo PLC-XU88 - page 68

    68 Check the indicators for projector condition. • • • green. • • • red • • • off • • • blinks green. When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow . When this indicator lights yellow , replace the projection lamp with a new one promptly . Reset the lamp replacement counter after ...

  • Sanyo PLC-XU88 - page 69

    69 Appendix Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V -, H-Frequency mentioned below and less than 140 MHz of Dot Clock for analog signal and 1 10 MHz of Dot Clock for digital signal. When selecting these modes, PC adjustment can be limited. ON-SCREEN DISPLA Y RESOLUTION H-Freq. ...

  • Sanyo PLC-XU88 - page 70

    70 Appendix ON-SCREEN DISPLA Y RESOLUTION H-Freq. (KHz) V -Freq. (Hz) D-VGA 640 x 480 31.47 59.94 D-480p 640 x 480 31.47 59.88 D-575p 768 x 575 31.25 50.00 D-SVGA 800 x 600 37.879 60.32 D-WXGA 1 1366 x 768 48.36 60.00 ON-SCREEN DISPLA Y RESOLUTION H-Freq. (KHz) V -Freq. (Hz) D-720p 1280 x 720 37.50 50.00 D-1035i 1920 x 1035 D-1080i 1920 x 1080 D-10 ...

  • Sanyo PLC-XU88 - page 71

    71 Appendix Appendix T echnical Specifications Mechanical Information Projector T ype Multi-media Projector Dimensions (W x H x D) 335 mm x 79.7 mm x 238.4mm (Not including adjustable feet) Net Weight 3.4 kg Feet Adjustment 0˚ to 10˚ Panel Resolution LCD Panel System 0.63" TFT Active Matrix type, 3 panels Panel Resolution 1,024 x 768 dots Nu ...

  • Sanyo PLC-XU88 - page 72

    72 Appendix Model No. COMPONENT~VGA Cable : POA-CA-COMPVGA SCART~VGA Cable : POA-CA-SCART VGA-Cable (10 m) : KA-MC-DB10 The parts listed below are optionally available. When ordering those parts, specify the item name and Model No. to the sales dealer . Optional Parts Accessories Owner’s Manual (CD-ROM) Quick Reference Guide AC Power Cord Remote ...

  • Sanyo PLC-XU88 - page 73

    73 Appendix This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information System Industries Association). This projector supports all commands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1. For PJ Link password, see page 49 on the owner ’s manual “Network Set-up an ...

  • Sanyo PLC-XU88 - page 74

    74 T erminal : Mini DIN 8-PIN SERVICE PORT CONNECT OR Vcc - Data + Data Ground 1 2 3 4 2 3 4 1  R X D ----- ----- GND RTS/CTS GND GND 1 2 3 4 5 6 7 8 COMPUTER IN 2 /COMPONENT IN /MONITOR OUT (ANALOG) T erminal: Analog RGB (Mini D-sub 15 pin) 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Configurations of T erminals Red (R/Cr) Input/Output Ground (Horiz.sy ...

  • Sanyo PLC-XU88 - page 75

    75 Appendix Appendix Write down the PIN code number in the column below and keep it with this manual securely . If you forgot or lost the number and unable to operate the projector , contact the service station. PIN Code Number Memo Factory default set No: 1 2 3 4* Factory default set No: 4 3 2 1* Put the label below (supplied) on in a prominent pl ...

  • Sanyo PLC-XU88 - page 76

    76 Appendix Dimensions 88.7(3.49) 132.1(5.20) 246.3(9.70) 106.3(4.19) 136.3(5.37) 5(0.2) 45(1.77) 40(1.57) 79.7(3.14) 47.2(1.86) 3.7(0.15) 4.5(0.18) 90(3.54) 105.5(4.15) 53.5(2.11) 70(2.76) 55(2.17) 84.7(3.33) 228(9.0) 10 MAX º Unit: mm(inch) Screw Holes for Ceiling Mount Screw: M4 Depth: 12.0(0.472) ...

  • Sanyo PLC-XU88 - page 77

    KD3AC-A SANYO Electric Co., Ltd. ...

Manufacturer Sanyo Category Projector

Documents that we receive from a manufacturer of a Sanyo PLC-XU88 can be divided into several groups. They are, among others:
- Sanyo technical drawings
- PLC-XU88 manuals
- Sanyo product data sheets
- information booklets
- or energy labels Sanyo PLC-XU88
All of them are important, but the most important information from the point of view of use of the device are in the user manual Sanyo PLC-XU88.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Sanyo PLC-XU88, service manual, brief instructions and user manuals Sanyo PLC-XU88. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Sanyo PLC-XU88.

Similar manuals

A complete manual for the device Sanyo PLC-XU88, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Sanyo PLC-XU88 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Sanyo PLC-XU88.

A complete Sanyo manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Sanyo PLC-XU88 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Sanyo PLC-XU88, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Sanyo PLC-XU88, that we can find in the current document
3. Tips how to use the basic functions of the device Sanyo PLC-XU88 - which should help us in our first steps of using Sanyo PLC-XU88
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Sanyo PLC-XU88
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Sanyo PLC-XU88 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Sanyo PLC-XU88?

Use the form below

If you did not solve your problem by using a manual Sanyo PLC-XU88, ask a question using the form below. If a user had a similar problem with Sanyo PLC-XU88 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)