English dropdown-ico

Manual Grandstream Networks DP715

52 pages Not applicable
Download

Go to site of 52

Summary
  • Grandstream Networks DP715 - page 1

    Grandstream Networks, Inc. DP715/DP710 DECT Cordless IP Phone ...

  • Grandstream Networks DP715 - page 2

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 2 of 52 DP715/DP710 USER MANUAL Index GNU GPL INFORMATION .......................................................................... 5 CHANGE LOG ............................................................................................. 6 CHANGES FROM 1.0.0.5 USER MA NUAL .................... ...

  • Grandstream Networks DP715 - page 3

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 3 of 52 REBOOTING THE DP715 BASE STATION FROM REMOTE ................................................................ . 47 CONFIGURING THE DP715 BASE STATION T HROUGH A CENTRAL SERVE R ................................ . 47 SOFTWARE UPGRADE ........................................................ ...

  • Grandstream Networks DP715 - page 4

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 4 of 52 T ABLE OF F IGURES DP715/DP710 U SER M ANUAL Figure 1: CONNECTING T HE DP715 BASE STATION ................................ .................................. 9 Figure 2: CONNECTING T HE DP710 CHARGER UNIT ............................................................... 11 Figure 3: INSERT ...

  • Grandstream Networks DP715 - page 5

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 5 of 52 GNU GPL INFORMATION The DP715/710 firmware cont ains third-party software license d under the GNU General Publi c License (GPL). Grandstream uses software under the specific term s of the GPL. Please see the G NU General Public License (GPL) for the exact terms and conditions of t he lic ...

  • Grandstream Networks DP715 - page 6

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 6 of 52 CHANGE LOG This section documents significant changes from previous versions of DP71x user manuals. Only major new features or major document updates are listed here. Minor updates for corrections or editing are not documented here. CHANGES FR OM 1.0.0.5 USER MANU AL  Added option [Up ...

  • Grandstream Networks DP715 - page 7

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 7 of 52 WELCOME Thank you for purchasing Grandstream’s DP715/710 DECT Cordless IP Phone . The DP 715/710 is the next generation of powerful, affordable, high quality and simple to configure DECT Cordless IP Phone for small business and residential users. Their compact siz e, superb voice quali ...

  • Grandstream Networks DP715 - page 8

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 8 of 52 Caution: Changes or modifications to this product not expressly approved by Grandstream, or operation of this product in any way other than as detailed by this User Manual, could void your manufacturer warranty. Please do not use a different power adaptor with the DP715 as it may cause d ...

  • Grandstream Networks DP715 - page 9

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 9 of 52 CONNECT YOUR DP715/710 EQUIPMENT P ACKA GING T able 1: EQUIPMENT P ACKAGING DP715 DP710  1 Base unit  1 Handset including 2 recharge able batteries (AAA, 1.2V / 500 m Ah, NiMH)  1 power supply plug for the base u nit  1 Ethernet cable  1 User guide  1 GPL License  1 ...

  • Grandstream Networks DP715 - page 10

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 10 of 52 Table 2 : DEFINITIONS OF THE DP715 CONNECTORS DC 6V Power adapter connection. NETWORK PORT (RJ -45) 10/100Mbps RJ -45 port to connect t o the network. RESET Factory Reset button: P ress for 7 seconds to reset f actory default settings. Table 3 : BASIC DEFINITIONS OF THE DP715 LEDS PATTE ...

  • Grandstream Networks DP715 - page 11

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 11 of 52 CONNEC TING THE DP710 CHARGER UNIT To setup the DP710, follow the step s below: Plug the 7V DC power adapter into an electrical outlet to start using the charger unit. Figure 2: CONNECTING THE DP710 CHARGER UNIT SETTING UP THE DP715/710 HANDSET To setup the handset, follo w the steps be ...

  • Grandstream Networks DP715 - page 12

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 12 of 52 PRODUCT OVERVIEW The DP715/710 is the next generation of power ful, affordable, high quality and simple to configure DECT Cordless IP Phone for small business and residential users. Their compact size, superb voice quality, rich feature set, market leading pr ice-performance and wide ra ...

  • Grandstream Networks DP715 - page 13

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 13 of 52 Phonebook (Per Handset) 200 numbers (up to 24 digits) with an associated name (up to 16 characters); 10 outgoing call entries; 30 incoming calls entries Multi-language Base Station Web UI: English; Voice Prompt : English, Spanish; Handset LCD Menu (15): English, French, German, Spanish, ...

  • Grandstream Networks DP715 - page 14

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 14 of 52 USING THE DP715/710 HANDSET GETTING F AMILIAR WIT H THE HANDSET The DP715/710 Handset has a dynamic sc reen. The screen displays differently depending on whether the handset is idle or in use (active screen). HANDSET KEYS DESCR IPTION 1. Display 2. Right display button (displa y functio ...

  • Grandstream Networks DP715 - page 15

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 15 of 52 - Power Key : T urn on / Of f the handset - On -hook: T erminate calls. - Redial List : Display your 10 last Outgoing calls - Up Navigation key - Increase the volume during the call. - Recall-Key/hook-flash key used to pla ce call on hold toggle bet we en calls. - Call List : Display yo ...

  • Grandstream Networks DP715 - page 16

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 16 of 52 HANDSET DISPLA Y STR UCTURE (LCD ) Figure 5: H ANDSET DISPLA Y S TRUCTURE BA TTER Y DISPLA Y • The batteries are fully char ged. • The batteries are 75% cha rged. • The batteries are half charged (50%). • The batteries are only 25% charged. • The batteries are almost flat. The ...

  • Grandstream Networks DP715 - page 17

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 17 of 52 Keypad Locked: ON when t he keypad is locked. Range Icon :  Solid when it’s within the base u nit coverage range.  Flashing when it’s out of the ba se unit coverage range (Th e handset will display “Searching”). HANDSET MENU STR UCTURE The handset has an easy- to -use menu ...

  • Grandstream Networks DP715 - page 18

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 18 of 52 HANDSET MENU O VER VIEW Display Definition Phonebook Displays the contact entries Handset  Ring Tone  Internal : Allows you to specify the ring t one for internal calls.  External : Allows you to specify the ring tone for external calls. Note: The Handset support up to 18 diffe ...

  • Grandstream Networks DP715 - page 19

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 19 of 52  Set Time Format  12Hour : Time will be displayed in 12 Ho urs format i.e. 3:00pm  24Hour : Time will be displayed in 24 H ours format i.e. 15:53 Tools  Appointement: Allows you t o set up reminders.  Stop Watch : Allows you to measure a time interval. HANDSET MENU DESCRI ...

  • Grandstream Networks DP715 - page 20

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 20 of 52 Deleting a Call 1. Press to access the calls list. 2. Use or to search fo r the number you need. 3. Press Option Softkey. 4. Press or repeatedly, select De lete . 5. Press to confirm. 6. The call is deleted and the next call appears on the display. Delete all Calls 1. Press to access th ...

  • Grandstream Networks DP715 - page 21

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 21 of 52 5. Once the number you require appears in the display and is hig hlighted, press Option . 6. Press or repeatedly and select Edit Entr y . 7. Press to confirm. 8. Press to delete each letter individually and use t he alphanumeric keys to enter the cor rect name. 9. Press Save . 10 . Pres ...

  • Grandstream Networks DP715 - page 22

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 22 of 52 SELECTING THE MENU LANGU AGE The Handset has a number of m enu languages, see software overv iew features. Proceed as follows to set the lang uage: 1. Press . 2. Scroll with and to Handset a nd press to confirm. 3. Scroll with and to Language and pres s to confirm. The supported languag ...

  • Grandstream Networks DP715 - page 23

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 23 of 52 SETTING THE RINGER V OL UME ON THE HANDSET You can adjust the ringer volume f or an incoming call (internal or ex ternal) to one of 6 levels (level 1 t o 5 and Off ). If you select Off , the icon appears in the display. The handset will not ring f or incoming calls . Level 5 is the high ...

  • Grandstream Networks DP715 - page 24

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 24 of 52 SETTING THE KEY LOCK You can lock the keypad again st unintentional entries. I t is, however, still possible to pick up incomi ng calls even with the keypad locked. Enable the Keypad Lock : 1. Press and hold for approxima tely 2 seconds. 2. The display shows Keypad Locked b riefly and t ...

  • Grandstream Networks DP715 - page 25

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 25 of 52 EDIT HANDSET NAME The procedure for changing the name of your handset sho wn in the display in standby mode i s as follows: 1. Press . 2. Press or repeatedly, select Handset . 3. Press to confirm. 4. Press or repeatedly, select Handse t Name . 5. Press to confirm. 6. Press repeatedly to ...

  • Grandstream Networks DP715 - page 26

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 26 of 52 APPOINTMENT S You can set five appointments or remind ers to which you can assign a name and an alarm by date and time. 1. Press . 2. Press or repeatedly, select Tool s . 3. The Appointment menu item is already highlighted. P ress . 4. Scroll with or to one of the five appointments and ...

  • Grandstream Networks DP715 - page 27

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 27 of 52 BASIC OPERATIONS UNDERST ANDING DP715/710 VOICE PR OMPT DP715 Base Station has a built-in v oice prompt menu for simple d evice configuration. The IVR menu work with any Handset registered to the base. Pick up the handset and dial “ *** ” to use the IVR menu. Table 9 : DP715/710 IVR ...

  • Grandstream Networks DP715 - page 28

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 28 of 52 “Device not registered” This prompt will be played immediately after off hook If the device is not register and the option “Outgoing Call without Registration” is in NO Five Success Tips when using the Voice Prompt 1. “*” shifts down to the next menu option 2. “#” return ...

  • Grandstream Networks DP715 - page 29

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 29 of 52 If you want to register a handset to a new base, it has to be f irst de -registered from the existing base by selecting "desubscribe ha ndset " option under the Handsets tab on the web GUI an d then repeat the above steps. COMPLETING CALL S There are three ways to complet e a ...

  • Grandstream Networks DP715 - page 30

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 30 of 52 b. Pick up the handset from the base or charger unit ( Only if Aut o Talk option is activated). To finish the call, press or place the handset in the base or the char ger unit. Note: - You can switch off the ringer t emporarily by pressing Silent Soft key. - When you receive a call the ...

  • Grandstream Networks DP715 - page 31

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 31 of 52 2. Enter the target IP address. Note: NO dial tone will be played bet ween step 1 and 2. Examples of Direct IP Calls: a) If the target IP address is 192.16 8.0.160, the dialing convention i s *47 or Voice Prompt with option 47, then 192*168*0 *160. followed by pressing the “#” key i ...

  • Grandstream Networks DP715 - page 32

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 32 of 52 Note: continuous busy tone does not indicate the transfer has been successful, nor does it indicate the transfer has failed. It often means there was a failure to receive second NOTIFY – ch eck firmware for most recent release. Attended Transfer This function is applicable using the H ...

  • Grandstream Networks DP715 - page 33

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 33 of 52 CALL FEATURES The DP715/710 supports all the traditional and advanced telepho ny features. Table 10 : DP715/710 CALL FEATURE DEFINITIO NS Key Call Features *02 Forcing a Codec (per call) *027110 (PCMU), *027111 (PCMA), *02723 (G723), *02729 (G729), *0272632 (G726-r32),*027201 (iLBC) *16 ...

  • Grandstream Networks DP715 - page 34

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 34 of 52 DP715 BASE STATION - CONFIG URATION GUIDE CONFIGURING THE BASE STATION THROUGH VOICE PROMPTS DHCP M ODE Select voice menu option 01 to enabl e DP715 to use DHCP. STATIC IP M ODE Select voice menu option 01 to enabl e DP715 to use STATIC IP mode, then use option 02, 03, 04, 05 t o set up ...

  • Grandstream Networks DP715 - page 35

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 35 of 52 The password is case sensitiv e with maximum length of 25 characters. The factory default password for End User and administrator is “123 ” and “admin” respectively. Only an administrator can access the “ADVANCED SETTING S ”, “ HAN DSET SETTINGS ” and “ PROFILE SETTING ...

  • Grandstream Networks DP715 - page 36

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 36 of 52  G726 - 32 Table 11 : BASI C SETTINGS End User Password Password to access the Web Configuration Menu. This field is case sensitive with a maximum length of 25 characters. Web Port By default, HTTP uses port 80. This field is for customizable web port. Telnet Server Default is set to ...

  • Grandstream Networks DP715 - page 37

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 37 of 52 Allow DHCP server to set Time Zone Default No. Let the DHCP server handle the Time Zone Language Languages supported with voice prompt and web interface, except Spanish that it is only in IVR. Reset Type • Full Reset : This will make a full reset • ISP Data : This will reset only th ...

  • Grandstream Networks DP715 - page 38

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 38 of 52 Handset Status Displays relevant information regarding the Handset status. Handset Hook SIP Registration DND Forward Busy Forward Delayed Forward Handset 1 On Hook Registered Yes 613 • Handset 1 is registered with SIP Server. • Handset 1 user has set Do Not Disturb. • Handset 1 us ...

  • Grandstream Networks DP715 - page 39

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 39 of 52 Via TFTP Server This is the IP address of the configured TFTP server. If selected and it is non-zero or not blank, the DP715 retrieves the new configuration file or new code image from the specified TFTP server at boot time. After 5 attempts, the system will timeout and will start the b ...

  • Grandstream Networks DP715 - page 40

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 40 of 52 SSL Private Key The user specifies SSL private key used for SIP over TLS in X.509 format. SSL Private Key Password The user specifies password to protect the private key above. ACS URL The user specifies the Auto Configuration Server’s URL (TR -069 protocol) ACS Username The user spec ...

  • Grandstream Networks DP715 - page 41

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 41 of 52 Syslog Level Select the DP715 to report the log level. Default is NONE. The level is one of DEBUG, INFO, WARNING or ERROR. Syslog messages are sent based on the following events: 1. product model/version on boot up (INFO level) 2. NAT related info (INFO level ) 3. sent or received SIP m ...

  • Grandstream Networks DP715 - page 42

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 42 of 52 If the NAT Traversal fi eld is set to “Yes” with no specified STUN server , the DP715 will periodically (every 20 seconds or so) send a blank UDP packet (with no payload data) to the SIP server to keep the “hole” on the NAT open. Advance Configuration DNS Mode One from the 3 mod ...

  • Grandstream Networks DP715 - page 43

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 43 of 52 Allow Incoming SIP Messages from SIP Proxy Only Default is No. Check the incoming SIP messages. If they don’t come from the SIP proxy, they will be rejected. If this option is enabled, the device will not be able to make direct IP calls. SIP T1 Timeout T1 is an estimate of the round-t ...

  • Grandstream Networks DP715 - page 44

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 44 of 52 a) xx+ - at least 2 digit numbers b) xx. - only 2 digit numbers c) ^ - exclude d) [3 -5] - any digit of 3, 4, or 5 e) [147] - any digit of 1, 4, or 7 f) <2=011> - replace digit 2 with 011 when dialing g) | - the OR operand • Example 1: {[369]11 | 1617xxxxxxx} Allow 311, 611, and ...

  • Grandstream Networks DP715 - page 45

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 45 of 52 Session Expiration is the time (in seconds) at which the session is considered timed out, provided no successful session refresh transaction occurs beforehand. The default value is 180 seconds. Min- SE Defines the minimum session expiration (in seconds). Default is 90 seconds. Caller Re ...

  • Grandstream Networks DP715 - page 46

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 46 of 52 Table 15 : HANDSETS SETTINGS Page All Handsets This button will allow you to ring all the Handsets registered with the DP715 Base Station Desubscribe All Handsets This button is used to de-register all the handset previously registered with the DP715 Base Station Enable Subscription Mod ...

  • Grandstream Networks DP715 - page 47

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 47 of 52 REBOO TING THE DP715 BA SE ST A TION FR OM REMO TE Press the “Reboot” button at the bottom of the configuration menu to re boot the DP715 Base Station remotely. The web browser will then display a message wind ow to confirm that reboot is underway. Wait 30 seconds to log in again. C ...

  • Grandstream Networks DP715 - page 48

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 48 of 52 SOFTWARE UPGRADE Software upgrade can be done via either TFTP or HTTP or HTTPS. The corresponding configuration settings are in the ADVAN CED SETTINGS configuration pag e. FIRMW ARE UPGRADE THR OUGH TFTP/HTTP/HTTPS To upgrade via TFTP or HTTP/HTTPS , the “Firmware Upgrade and Provisio ...

  • Grandstream Networks DP715 - page 49

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 49 of 52 INSTR UCTIONS FOR UPLO AD FROM L OCAL DIRECT OR Y 1. Download the firmware file f rom Grandstream web site 2. Unzip it and copy the file in to a folder in your PC 3. From the DP715 web interface (Advanced Settings page) you can browse your hard drive and select the folder where you prev ...

  • Grandstream Networks DP715 - page 50

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 50 of 52 Similarly, Config File Prefix and Postfix allows device to download the configuration file with the matching Prefix and Postfix. Thus multiple conf iguration files for t he same device can be stored in one di rectory. In addition, when the field “Check New Firmware only wh en F/W pre/ ...

  • Grandstream Networks DP715 - page 51

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 51 of 52 RESTORE FACTORY DEFAULT SETTING WARNING! Restoring the Factory Default Setting will DELETE all configuration information of the phone. Please BACKUP or PRINT out all the settings before you approach to following steps. Grandstream will not take any responsibility if you los e all the pa ...

  • Grandstream Networks DP715 - page 52

    Firmware version 1.0.0.8 DP715/DP710 User Manual Page 52 of 52  VOIP Da ta : This will reset only the data related with a service provider like SIP server, sip user ID, provisioning and others. Note: 1. Factory Reset will be disab led if the “Lock keypad upd ate” is set to “Yes”. 2. If the DP715 was previously locked by your local servic ...

Manufacturer Grandstream Networks Category Dect

Documents that we receive from a manufacturer of a Grandstream Networks DP715 can be divided into several groups. They are, among others:
- Grandstream Networks technical drawings
- DP715 manuals
- Grandstream Networks product data sheets
- information booklets
- or energy labels Grandstream Networks DP715
All of them are important, but the most important information from the point of view of use of the device are in the user manual Grandstream Networks DP715.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Grandstream Networks DP715, service manual, brief instructions and user manuals Grandstream Networks DP715. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Grandstream Networks DP715.

Similar manuals

A complete manual for the device Grandstream Networks DP715, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Grandstream Networks DP715 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Grandstream Networks DP715.

A complete Grandstream Networks manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Grandstream Networks DP715 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Grandstream Networks DP715, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Grandstream Networks DP715, that we can find in the current document
3. Tips how to use the basic functions of the device Grandstream Networks DP715 - which should help us in our first steps of using Grandstream Networks DP715
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Grandstream Networks DP715
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Grandstream Networks DP715 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Grandstream Networks DP715?

Use the form below

If you did not solve your problem by using a manual Grandstream Networks DP715, ask a question using the form below. If a user had a similar problem with Grandstream Networks DP715 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)