English dropdown-ico

Manual Makita UH303DST

16 pages 0.77 mb
Download

Go to site of 16

Summary
  • Makita UH303DST - page 1

    Battery-Powered Hedge TLimmer Equipped with Electric Brake 300 mm (11=3/4") MODEL UH303D 300 mm (11-3/4") MODEL UH303DST With Battery & Charger Effective cutting blade length 300 mm (1 1-314") INSTRUCTION MANUAL Strokes per min. 1,200 Dimensions (L x W x HI 669 mm x 140 mm x 137 mm (26-318" x 5-1/2" x 5-318") Net w ...

  • Makita UH303DST - page 2

    IMPORTANT SAFETY INSTRUCTIONS (For Hedge Trimmers) . WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PERSONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. 1. Avoid Dangerous Environment - Don't use hedge trimmers in damp or wet 2. Don't Use I ...

  • Makita UH303DST - page 3

    extension cords periodically and replace if damaged. Keep handles dry, clean, and free from oil and grease. 14. Check Damaged Parts - Before further use of the hedge trimmer, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for align- ment of moving ...

  • Makita UH303DST - page 4

    IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY & CHARGER I. SAVE THESE INSTRUCTIONS - This manual contains important safety and operating instructions for battery charger. 2. Before using battery charger, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery. 3. CAUTION - To reduce risk of i ...

  • Makita UH303DST - page 5

    ADDITIONAL SAFETY RULES FOR BATTERY 1. Always charge the Makita battery 122 immediately after purchase. 2. Always recharge the Makita battery 122 after use. 3. Be sure to charge the Makita battery 122 for approx. one week every six months, when not using it for long periods. If left uncharged, it may become unchargeable. 4. Use only the Makita char ...

  • Makita UH303DST - page 6

    ADDITIONAL SAFETY RULES FOR CHARGER 1. The Makita charger Model DC122 is specifically designed to charge only the Makita battery 121 or 122. Do not attempt to charge any other battery with this charger. 2. Handle the charger carefully. Do not drop or strike it. 3. Never carry the charger by cord or yank it to disconnect from receptacle. 4. Keep cor ...

  • Makita UH303DST - page 7

    Charging Connect the battery to the charger using the adaptor cord. Then plug the charger into the power source. The charging light will illuminate and charging will begin. When the charg- ing light goes out at a certain time, the charging is complete. Unplug the charger. (Note: Refer to the table below for the charging time.) DC122 122 Approx. 1 h ...

  • Makita UH303DST - page 8

    Switch action To prevent the trigger from being acciden- tally pulled, a lock-off lever is provided. To start the tool, slide the lock-off lever in the direction of the arrow and pull the trigger. Release the trigger to stop. - Lock-off lever Switch trigger CAUTION: Before connecting the battery to the tool, always check to see that the switch trig ...

  • Makita UH303DST - page 9

    Carrying the battery Hook the battery to your waist belt. If the adaptor cord is too long for your work, use the band provided to hold it when you coil it shorter. Operation Do not attempt to cut branches thicker than 8 mm (5/16") diameter with this trimmer. These should first the cut with shears down to the hedge trimming level. Hold the tool ...

  • Makita UH303DST - page 10

    To cut a hedge side evenly, it helps to cut from the bottom upwards. Trim boxwood or rhododendron from the base toward the top for a nice appearance and good job. CAUTION: 0 Keep hands away from blades. Be careful not to accidentally contact a metal fence or other hard objects while trim- *When not in use, be sure to cover the blades with the blade ...

  • Makita UH303DST - page 11

    MAINTENANCE CAUTION : Always be sure that the tool is switched off and the battery is disconnected from the tool before attempting to perform inspection or maintenance. Blade maintenance After use, clean off the blades (both sides) with a stiff brush. Then wipe the blades with a cloth and coat them with light machine oil. CAUTION: Dirt and corrosio ...

  • Makita UH303DST - page 12

    ACCESSORIES CAUTION : These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner. Charger Model DC122 Blade 0 Battery 122 0 Exte ...

  • Makita UH303DST - page 13

    Dec -19-'94 US 300 mm (11-3/4") Model UH303D BATTERY-POWERED HEDGE TRIMMER Note: The switch and other part configurations may differ from country to country. 13 ...

  • Makita UH303DST - page 14

    MODEL UH303D ';"OM GfD DESCRIPTION Dec.-19-'94 US 'LLM AtD DESCRIPTION MACHINE ~ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1 1 1 1 1 1 1 2 1 1 1 1 1 1 Name Plate Housing Set (With Item 201 Shaft Helical Gear 52 Plate Crank Urethan Sleeve 4 Guard Hex NutM4-10 Gear 14-34 Flat Washer 6 Shaft Motor ID C 12 V 1 sponge Sea1 MACHINE ~ 15 16 17 ...

  • Makita UH303DST - page 15

    15 ...

  • Makita UH303DST - page 16

    Recycling the battery The only way to dispose of a Makita battery is to recycle it. The law prohibits any other method of disposal. To recycle the battery: 1) Remove belt from the battery 2) Ship or take battery to your nearest Makita Factory Service Center or Distributor that sells Makita lead batteries. (Call your nearest Makita Service Center or ...

Manufacturer Makita Category Trimmer

Documents that we receive from a manufacturer of a Makita UH303DST can be divided into several groups. They are, among others:
- Makita technical drawings
- UH303DST manuals
- Makita product data sheets
- information booklets
- or energy labels Makita UH303DST
All of them are important, but the most important information from the point of view of use of the device are in the user manual Makita UH303DST.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Makita UH303DST, service manual, brief instructions and user manuals Makita UH303DST. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Makita UH303DST.

Similar manuals

A complete manual for the device Makita UH303DST, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Makita UH303DST by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Makita UH303DST.

A complete Makita manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Makita UH303DST - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Makita UH303DST, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Makita UH303DST, that we can find in the current document
3. Tips how to use the basic functions of the device Makita UH303DST - which should help us in our first steps of using Makita UH303DST
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Makita UH303DST
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Makita UH303DST in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Makita UH303DST?

Use the form below

If you did not solve your problem by using a manual Makita UH303DST, ask a question using the form below. If a user had a similar problem with Makita UH303DST it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)