English dropdown-ico

Manual Planet PS-1010MG

90 pages 2.97 mb
Download

Go to site of 90

Summary
  • Planet PS-1010MG - page 1

    Wir ed / Wir el es s USB2.0 MFP Print Server FPS-1010M / FPS-1010MG User’s Manual Version: 2.0 (January, 2008) ...

  • Planet PS-1010MG - page 2

    Copyright Copyright © 2008 by PL ANET T echnology Corp. All rights re served. No part of this publication may be reproduce d, transmitted, trans cribed, stored in a retrieval system, or translated into any language o r computer la nguage, in any form or by any means, electronic, mechani cal, magnetic, optical, chemic al, manual or otherwise, witho ...

  • Planet PS-1010MG - page 3

    telecommunication terminal Equipme nt and the mutual re cognition of their conformity (R&TTE) The R&TTE Directive repeals and repl aces in the directive 98/13/EEC (T elecommunication s T erminal Equipment and Satellite Earth S t ation Equipment) As of April 8,2000. Safety This equipment is designe d with the utmost ca re for the safety of t ...

  • Planet PS-1010MG - page 4

    Content s 1. Introduction ............................................................................................................................. 1 2. Product Package ..................................................................................................................... 1 3. MFP Server Installation in Windows 2000/XP/Vista ..... ...

  • Planet PS-1010MG - page 5

    11 . 3 Setup MFP Server ’s IP Address .......................................................................... 71 1 1.3.1 DHCP ........................................................................................................... 72 1 1.3.2 BOOTP .............................................................................................. ...

  • Planet PS-1010MG - page 6

    1. Introduction Thank you for purchasing and using ou r MFP print server . The FPS-1010M / FPS-1010MG allows your Multi- function printer (called for short: MFP) or printe r to become a shared device on the network. Unlike many print serve rs, it c an communicate with MFP and printer as if it is connecte d directly to your computer . Because of the ...

  • Planet PS-1010MG - page 7

    3. MFP Server Installation in Windows 2000/XP/Vista 3.1 Hardware Inst allation 1. Unpack the FPS-1010M / FPS-1010MG p ackage an d verify the items listed in the previous section are provided. 2. Use USB cable to connect FPS-1010M / FPS-1010MG to the MFP or printer that you want to share to your network. 3. Use a RJ-45 cable to connect the FPS-1 010 ...

  • Planet PS-1010MG - page 8

    3. The “MFP Server Utilitie s - InstallShiled Wizard” is displayed, click "Next". 4. Click “Next” to install the MFP Server utilit ies in the default folder or click “Change” to specify the destination folder where you woul d like to install the MFP Server utilities. 3 ...

  • Planet PS-1010MG - page 9

    5. The system starts insta lling the MFP Server Utilities. 6. The “MFP Server Configuration” screen is disp layed. If you want to configure the MFP Server, please select “Yes, I want to conf igure the MFP Server now.” and click “Next”. Then refer to the following steps to configure your M FP server. Or you can select “No, I will confi ...

  • Planet PS-1010MG - page 10

    7. The MFP Server List will auto search the MFP Servers in the net work. Select the MFP Server you want to setup a nd click “Next” to contin ue. 8. Enter the “User Name” an d “Password” of t he MFP Server you have selected to login the MFP Server. The default “User Name” and “Pa s sword” is “ admin ”. Click “OK”. 5 ...

  • Planet PS-1010MG - page 11

    9. Set the “Alia s Name” and the “MFP Server Descrip tion” to the MFP Server here. Click “Next”. NOTE: You can define the location or other info rmation of the MFP Serv er for easy to find the MFP by filling “MFP Server Description”. 10. Please set the network settings for the FPS-1010M / FPS-1010M G manually. The default network va ...

  • Planet PS-1010MG - page 12

    11. The FPS-1010MG will find available wireless network automatically. You could also press the “Refresh” button to find the available wireless network manually. After refresh procedure, there will show the available wirele ss networks. Please select the appropriate wireless network that you would like to con nec t from the list and click “Ne ...

  • Planet PS-1010MG - page 13

    13. The configurations are finished. Please click “Finish” to apply new settings. NOTE: Only FPS-1010MG shows the wireless mod e, SSID, channel and security information. 14. Select “Yes, I want to restart my computer now” and click “Finish” to complete the installation. 8 ...

  • Planet PS-1010MG - page 14

    15. The “MFP Manager” will display on your scree n automatically t hat after you install management software finish and your com puter get into Windows XP firs t time. Choose “Yes” that enable “MFP Manager” utilit y automatically when Windows starts. 3.3 Inst all the MFP Drivers/Utilities 1. When the installation is completed, the “M ...

  • Planet PS-1010MG - page 15

    3. The following message is displayed to wa rn you that you have to follow the installation instructions in the manual of the MFP. If t he MFP is requiring you to connect the MFP t o your computer directly, please click “Connect”. NOTE: Some MFP requi res users to install the drivers/utilities b efore connecting the MFP to your computer, ple as ...

  • Planet PS-1010MG - page 16

    5. Before creating the connection, you have to install two kind s of drivers: the drivers for MFP Server and the drivers for MFP. Please cl ick “Next” to start the installatio n. 6. When you are installing the MFP Server Drivers, the following message will be displayed to notify you. When the MFP Server driver s are all installed, the message w ...

  • Planet PS-1010MG - page 17

    7. Select “Install the software automatically (Recommend ed)” to auto in stall the “MFP Server Enhanced Controller” d river , and then click “Next”. 8. The driver will be installed automatically. Click “Finish” to complete th is driver installation. 12 ...

  • Planet PS-1010MG - page 18

    9. The following message is displayed to remi nd you that you are now installing the MFP Drivers. When you are sure that the MFP has been conn ected to MFP Server and the MFP driver CD is inserting to your CD -ROM completely, please clic k “Fini sh”. 10. Windows will start install th e MFP. Please refer to your MFP manual and foll ow the steps ...

  • Planet PS-1010MG - page 19

    4. Using the MFP After you have followed the inst all wizard to finish the MFP inst allation, the MFP is now connected to your computer . Y ou ca n start sharing print, scan, fax and card rea der functions provided on the MFP . NOTE: If you have finished using the MFP, please click “Di sconnect” to release the MFP from your PC. When there is a ...

  • Planet PS-1010MG - page 20

    4.2 Share Scanner Most of the MFP provides scan utility for users. Y ou can scan pi ctures or documents through the utility . In Windows XP , user can also scan from Windows XP scanning utility . An example: HP 5600 Ser ies Utilities Windows XP Scanning Utility 15 ...

  • Planet PS-1010MG - page 21

    4.3 Share Card Reader If the MFP suppo rts card reader fun ction, you can read the files from the plugged ca rd reader through the MFP Server . 16 ...

  • Planet PS-1010MG - page 22

    5. MFP Server Control Manager 5.1 MFP Server List The “MFP Server Control Manager” can automatic ally find the MF P server in the network and show it in the MFP Server List. Users can se lect a MFP and click “Conne ct” to connect the MFP just like you have directly connected the MFP to your computer thro ugh USB cable. It also displays the ...

  • Planet PS-1010MG - page 23

    Contact Information – When the current us er has set his “Contact Information”, you can see it here. You can co ntact with the current user for asking to disconnect the MFP. Refresh Refresh the “MFP Se rver List” immediately. Connect Let the MFP be connected to your computer. Disconnect Disconnect the selected M FP. Add to My Favorite Add ...

  • Planet PS-1010MG - page 24

    5.3 Auto Connect List T o let the system occupy the MFP server aut omati cally when you want to print a document just like the behavior of using traditional print server , you can add the MFP into your Auto Connect List. The system will send the printin g jobs to the MFP when the MFP Server is idle and not being connected. Note: If you have sent a ...

  • Planet PS-1010MG - page 25

    3. Select the MFP that is connected to the selected MFP Server. Click “Ok”. 4. The setup is finished. 20 ...

  • Planet PS-1010MG - page 26

    5.4 Option Settings 5.4.1 General Setting General Setting Run MFP Manager when Windows starts Execute the “MFP Server C ontrol Mana ger” when Windows starts every time. By default, it is enabled. Minimized when start MFP Manager Minimized the “MFP Server Cont rol Manager” to an icon in the system tray when you start the “MFP Server Contro ...

  • Planet PS-1010MG - page 27

    5.4.2 Search for MFP Server If there is an MFP Server is not in the netwo rk as your computer , you can enter the IP Address of the MFP Server to do the remote search. The MFP Server i n the “Remote MFP Server List” will be added to the “MFP Server List” for you to configure. NOTE: If the remote MFP Server you have searched is behind NA T R ...

  • Planet PS-1010MG - page 28

    6. Server Management 6.1 Introduction This chapter introduces MFP Server ’s system confi guration utility in Windows environment. This utility provides the most complete m anagement and configuration functions on the MFP Server side. This utility only provides configurat ion functions for MFP Server itself; it does not include configuration funct ...

  • Planet PS-1010MG - page 29

    Refresh: Refresh the MFP Server ’s st atus by pressing the “Refresh” button. Reboot: Rest a rt the MFP Server by pressing the “Reboot” b utton. Search: Search all available MFP Servers on th e Network. 6.2 Stat us Click “S tatus” icon on the tool bar , the status of the currently sele cted MFP Server will be showed on the right side o ...

  • Planet PS-1010MG - page 30

    6.3 Setup Click “Setup” icon on the tool bar , the setup items of the current selected MFP Server will be showed on the right side of the window . Double click one of the icons to set up the selected MFP Server . A screen will pop up to verify “User Name” and “Pa ssword” of the MFP Server . The default values are: User Name: admin, Pass ...

  • Planet PS-1010MG - page 31

    6.3.1 General Configuration Double Click “General” i con and the Gener al configuration window will pop-up. Y ou can see basic MFP Server informat ion in this page. Y ou also can configure the “Se rver Name”, “User Name” and “Password” here. Server Name: The name of the MFP Server . Y ou can use this name to identify the MFP Server ...

  • Planet PS-1010MG - page 32

    6.3.2 TCP/IP Configuration Double Click “TCP/IP” icon and the TCP /IP configuration window will pop-up. Y ou can configure the MFP Server to automatic ally get IP from DHCP server or manually specify st atic IP . When there is a DHCP Server in your network, you may select ‘Auto IP” of this dialog box to let your MFP Server to obtain an IP a ...

  • Planet PS-1010MG - page 33

    6.3.3 System Configuration Double Click “System” icon and the Sy stem configuration win dow will pop-up. In the System configuration pa ge, you can s ee all available printing methods, firmware upgrade and load factory default functio n. Upgrade Firmware : Y ou can use this “Upgrade Firmware” tool to update the newest firmware of the MFP Se ...

  • Planet PS-1010MG - page 34

    6.3.4 Wireless Configurat ion (FPS-1010MG Only) Due to wireless interface is “Auto” in default. If you want to use the print server through wireless interface, please set up the MFP server through Ethernet firstly . After configure the wireless LAN settings, unp lug the Ethernet cabl e from the MFP server , then you can start to use the MFP se ...

  • Planet PS-1010MG - page 35

    2. When you are sel ect first option to continue, you will see this screen for scan th e wireless network. Please select the wi reless device t hat you want to con nect and click “Next”. If you don’t have see the wireless device that you would li ke to connected, please click “Scan” to search again. 3. This print server suppo rts WEP and ...

  • Planet PS-1010MG - page 36

    WEP Securit y Mode: Y ou can select “64 bit” or “12 8 bit” leng th and “WEP(HEX)” or “WEP(ASCII)” format for the encryption key . Longer key length can provide stronger security but worth communication performance. Enter four key values by following the rules bel ow and select one key as the default key . PassPhrase A passphrase sim ...

  • Planet PS-1010MG - page 37

    WP A-shared key Security Mode: When “WP A-shared key”, also named “WP A-PSK” requires users to select the advanced encryption methods, i.e. TKIP and enter a set of shared key . WP A Algori thms TKIP - TKIP (T emporal Key Integrity Protocol) changes the temporal key every 10,000 packet s. This insures much greate r security than the standa r ...

  • Planet PS-1010MG - page 38

    4. Y ou can select to let the print server automatically obtain IP settings from DHCP Server or manually assign the IP settings. If you manually assign the IP settings, you hav e to enter IP address, subnet mask an d default gateway address. When you finish conf iguring the IP settings, click “Next” to confirm the IP Addr ess configuration. 5. ...

  • Planet PS-1010MG - page 39

    6.3.4.2 Ad-Hoc Mode 1. Y ou can let the print se rver automatically as sociate with other wirel ess station o r manually assign the SSID of your wireless network. Y ou can let the MFP server automatically select the channel that is the same with the peer o r manu ally assi gn a channel. 2. If you are select the first option to continue, you will se ...

  • Planet PS-1010MG - page 40

    3. This print server suppo rts WEP and WP A-PSK security mode. If you want to use WEP encryption to protect your wireless n etw or k, you have to selec t “WEP(ASCII)” or “WEP(HEX)”. If you want to use WP A-PSK, y ou have to select “WP A-shared key”. The wireless security setting should be the same with other wireless devices in the same ...

  • Planet PS-1010MG - page 41

    WEP Securit y Mode: Y ou can select “64 bit” or “12 8 bit” leng th and “WEP(HEX)” or “WEP(ASCII)” format for the encryption key . Longer key length can provide stronger security but worth communication performance. Enter four key values by following the rules bel ow and select one key as the default key . PassPhrase A passphrase sim ...

  • Planet PS-1010MG - page 42

    WP A-shared key Security Mode: When “WP A-shared key”, also named “WP A-PSK” requires users to select the advanced encryption methods, i.e. TKIP and enter a set of shared key . WP A Algori thms TKIP - TKIP (T emporal Key Integrity Protocol) changes the temporal key every 10,000 packet s. This insures much greate r security than the standa r ...

  • Planet PS-1010MG - page 43

    4. Y ou can select to let the print server automatically obtain IP settings from DHCP Server or manually assign the IP settings. If you manually assign the IP settings, you hav e to enter IP address, subnet mask an d default gateway address. When you finish conf iguring the IP settings, click “Next” to confirm the IP Addr ess configuration. 5. ...

  • Planet PS-1010MG - page 44

    6.3.5 MFP Server Management Double Click “MFP Server Management” icon a nd the MFP Server configuration win dow will pop-up. Y ou are able to manage the MFP Server as below . Force Release : Select the port numbe r and then clic k “Force Rel ease” will help to you disconnect the current connection between the user and the connected device. ...

  • Planet PS-1010MG - page 45

    6.4 Report Click “Report” icon on the tool bar , the Re port window will pop up. The report list s basic information of all avail able MFP Servers on the network. The information includes Device Name, MAC ID, Model T ype and Firmware V ersion of MFP Server . 40 ...

  • Planet PS-1010MG - page 46

    7. Web Management 7.1 Introduction MFP Server can be configured and managed by W eb Browser . Through Local Area Network, or even Internet, administrator can easily c onfigure a nd manage MFP Server’s various main functions in browsers. Simply enter MF P Server ’s IP add ress into your browser’s address field to manage a MFP Server by MFP Ser ...

  • Planet PS-1010MG - page 47

    7.3 Device Setup 7.3.1 System System Information includes “Device Name”, “M FP Server Name”, “Model T ype”, “Firmware V ersion”, “MAC Address”, “Wireless S tat us” and the p roto cols enabled statu s, etc. NOTE: Only FPS-1010MG has “Wireless LAN S t atus” & “Wireless Configuration” information. 42 ...

  • Planet PS-1010MG - page 48

    7.3.2 Printer This page will sho w the information of MFP or printer that connected to the MFP Server port. 7.3.3 TCP/IP This page list s all TCP/IP settings of the MF P Server including “IP Address”, “Subnet Mask” and “Gateway”. It also can tell the DHCP server is “On” or “Of f”. 43 ...

  • Planet PS-1010MG - page 49

    7.4 Setup Wizard 7.4.1 System Y ou can change the MFP Server n ame and po rt name of the MFP Server from he re. MFP Serv er Name: The name of the MFP Server . Y ou can use this name to identify the MFP Server when you are searching for the MFP Server by the “Server Manager” utilities. PORT1 Name: The name of the port which MFP server plugs on. ...

  • Planet PS-1010MG - page 50

    7.4.1.2 Advanced Settings Some advanced feature of the MFP Server can be set here. LPR This MFP Server su pports LPR printing pr otocols. By default this protocol s is enabled. IPP This MFP Server supports IPP printing protocols. By default this protocols is enabled. Raw Printing This MFP Server supports RA W prin ting pr otocols. By default this p ...

  • Planet PS-1010MG - page 51

    7.4.2 Wireless (FPS-1010MG O nly) If you want to use the print server through wireless LAN, please set up the MFP server through Ethernet first and make sure your wi reless LAN settings are corre ct. After setting the wireless LAN, unplug the Et hernet cable and resta r t the MFP server , then you can start to use the MFP server throu gh wireless L ...

  • Planet PS-1010MG - page 52

    7.4.2.1 Site Survey Y ou can use this “Site Survey” function to search for available access points in you location. In the list is the information of all available a cce ss points or wirele ss stations in cludes SSID, BSSID, Channel, T ype, Encryption and Signal S tr ength. Y ou can select one wireless device in the list for this print server t ...

  • Planet PS-1010MG - page 53

    WEP Securit y Mode: Key Length Y ou can choose “6 4-bit” to use WEP with 64 -bit key length encryption or choose “128-bit” to use WEP with 128-bit key length encryption. The longer key length can provide better security but worse transmission throughput. Key Format Y ou may select to use ASCII Characters (alphanumeric format) or Hexadecimal ...

  • Planet PS-1010MG - page 54

    WP A-PSK Mode: When “WP A-shared key”, also named “WP A-PSK” requires users to select the advanced encryption methods, i.e. TKIP and enter a set of shared key . WP A Algori thms TKIP - TKIP (T emporal Key Integrity Protocol) changes the temporal key every 10,000 packet s. This insures much greate r security than the standa rd WE P security ...

  • Planet PS-1010MG - page 55

    7.4.3 TCP/IP If you need the MFP Serv er to automatically get an IP from DHCP server , select “Enable Obtain TCP/IP Settings Automatically (Use DH CP/ BOOTP)”. Y ou also can select “Disable Use the following TCP/IP Settings” to manually assign “IP Address”, “Subnet Mask” and “Gateway” for the MFP Server . IP Addres s: IP address ...

  • Planet PS-1010MG - page 56

    7.4.4 Save Settings When you select Save Settings, you will see t he dialog box for aski ng you to make sure you want to save the settings and reboot. Please cli ck “Y es” to save the configuration and reboot. 7.5 System T ools 7.5.1 Load Default Y ou can use this page to re store the MFP Server to factory default settings. Please click “OK? ...

  • Planet PS-1010MG - page 57

    7.5.2 Upgrade Y ou can upgrade new firmware to the MFP Server in this page. Click “Browse” to locate the new firmware in your HDD and then click “OK” to start the upg rade procedure, the firmware will be updated in several minutes. NOTE: Be aware that if you have started upgra ding firmware, please DO NOT turn the MFP Server of f. That will ...

  • Planet PS-1010MG - page 58

    8. LPR Printing LPR Printing (Line Printer Remote tech nology) allows users to connect to MFPs or printers via TCP/IP for p rinting sharing. The computer with Win dows 98SE/Me/NT/2000/XP/2003 operating system can use the proto col to s hare printing in the network. MFP Server can support LPR printing by default. If you install the MFP Server in Win ...

  • Planet PS-1010MG - page 59

    4. Select “Local Printer attached to this computer” and click “Next”. 5. Choose “Create a new port” and “S tandard T CP/IP Port”. Click “Next”. 54 ...

  • Planet PS-1010MG - page 60

    6. Please make sure that the MFP Server and the MFP or Printer have turned o n and connected to the network correctly before you continu e. Click “Next”. 7. Enter the IP Address of the MFP Server in the “Print er Name o r IP Address”. Click “Next”. 55 ...

  • Planet PS-1010MG - page 61

    8. Select “Custom” and click “Settings”. When y ou h ave finished the settings at step 9, click “Next” to continue. 9. Select “LPR” and enter “lpt1” in the “Que ue Name”, click “OK”. By default the queue name of the MFP Server i s “lpt1 ”. 56 ...

  • Planet PS-1010MG - page 62

    10. Click “Finish”. 11. Select a suitable printer manufacturer and the pri nter model and click “Next”. If your printer is not in the list, click “Have Disk…” to install the driv er of the printer . After installation, the printer model will be added to the list. 57 ...

  • Planet PS-1010MG - page 63

    12. Choose to set the print whether as a default printer or not. Click “Next”. 13. Please select the test page will printed af te r the configuration or not. Please click “Next”. 58 ...

  • Planet PS-1010MG - page 64

    14. Y ou have added the network printer to the PC successfully . The information of the printer is displayed in the windows. Click “Finish”. 59 ...

  • Planet PS-1010MG - page 65

    9. RAW Printing RA W Printing allows users to connect to printers via T CP/IP for print sharing. A computer with Windows 2000/XP/2003 operating sy stem can use the protocol to share printing on t he network. The MFP server can support RA W printing by default. T o configure the RA W setting in Windows 2000/ XP/2003, please follow the ste ps below . ...

  • Planet PS-1010MG - page 66

    4. Select “Local Printer attached to this computer” and click “Next”. 5. Choose “Create a new port” and “S tandard T CP/IP Port”. Click “Next”. 61 ...

  • Planet PS-1010MG - page 67

    6. Please make sure that the MFP server and t he all-in-one printer or Printer a re turned on and connected to the network correctly before you continue. Click “Next”. 7. Enter the IP Address of the MFP serve r in t he “Printer Name or IP Address” field. Click “Next”. 62 ...

  • Planet PS-1010MG - page 68

    8. Select “Custom” and click “Settings”. When y ou h ave finished the settings at step 9, click “Next” to continue. 9. Select “RAW” and then cli c k “OK ”. 63 ...

  • Planet PS-1010MG - page 69

    10. Click “Finish”. 11. Select a suitable printer manufacturer and the pri nter model and click “Next”. If your printer is not in the list, click “Have Disk…” to install the driver of the printer . After installation, the printer model will be added to the list. 64 ...

  • Planet PS-1010MG - page 70

    12. Choose to set the print whether as a default printer or not. Click “Next”. 13. Please select the test page will printed af te r the configuration or not. Please click “Next”. 65 ...

  • Planet PS-1010MG - page 71

    14. Y ou have added the network printer to the PC successfully . The information of the printer is displayed in the windows. Click “Finish”. 66 ...

  • Planet PS-1010MG - page 72

    10. IPP Printing 10.1 Introduction IPP (Internet Printing Proto col) Printing provides a convenient way of remote printing servic e by TCP/IP . When the MFP Server is work with a legal IP address, it can support IPP printing in Windows 2000/XP/2003 by default. By using the IPP printing, you can share the printer to all the PC’s that can access th ...

  • Planet PS-1010MG - page 73

    4. Select “A network printer , or a printer attached to another computer”. Click “Next”. 5. Select “Connect to a printer on the Internet or on a home or of fice network” and enter th e URL of MFP Server . The URL format is “http ://IP:631/Port Name”. The IP should be the MFP Server’s IP . The number 631 is IPP st andard port numbe ...

  • Planet PS-1010MG - page 74

    6. Select a suit able printer manufacturer and the printer model and click “Next”. If your printer is not in the list, click “Have Disk…” to install the driv er of the printer . After installation, the printer model will be added to the list. 7. Choose to set the print whether as a default printer or not. Click “Next”. 69 ...

  • Planet PS-1010MG - page 75

    8. Y ou have added the network printer to the PC successfully . The information of the printer is displayed in the windows. Click “Finish”. 70 ...

  • Planet PS-1010MG - page 76

    11. UNIX System Network 11.1 Introduction The MFP Se rver is available for TCP/IP printin g by Unix LPD (Line Printer Daemon) protocol. The LPD protocol originat ed with Unix releas e is based on the BSD version of Unix and supported under most versions of Unix. This chapter explains how to configu re the MFP Server for TCP/IP operation, and how to ...

  • Planet PS-1010MG - page 77

    11.3.1 DHCP There are many Unix systems t hat support DHCP protocol, and the procedures to configure the DHCP se rver database are dif ferent. Please re fer to the manual of Unix for the way to use different DHCP Server . It is highly recommend ed that the DHCP server should be located on the same network a s the MFP Server . 11.3.2 BOOTP If you ha ...

  • Planet PS-1010MG - page 78

    Node ID: 00304F010101 (t his implies Ethernet address is 00304F 010101), IP addre ss: 2 03.66.191.12 The entry for this MFP Server in the /etc/bootpt ab file should be: MF010101: :ht=1: :ha=00304F01010 1: :ip=203.66.191.12: 11.4 V erify MFP Server ’s IP Address T o verify your MFP Server is responding to the newly assigne d IP address usin g a ...

  • Planet PS-1010MG - page 79

    2. Create a spool directory for the printe r in the same directory where spool directorie s are normally kept on the machine, su ch as /var/spool or / var/spool/lpd: mkdir /var/spool/lp d/pserv erd chown daemon /var/spool/lp d/pserv erd chgrp daemon /var/spool/lp d/p serv erd chmod 775 /var/spool/lp d/p serverd 3. Add an entry to the host ’ s /et ...

  • Planet PS-1010MG - page 80

    12. MFP Server Installation in MAC OS LPR Printing (Line Printer Remote te chnology) allows Macintosh computers to conne ct to MFPs or printers via TCP/IP . LPR Printing can be set up on any Macintosh wi th version 9.x above. T o enable LPR Printing in Macintosh, please follow the proce dures below . 1. In the Desktop, click “System Preferences? ...

  • Planet PS-1010MG - page 81

    3. From the “Print & Fax” screen, click “Set Up Printers…”. 4. Click “Add” to add the new MFP Server through TCP/IP . 76 ...

  • Planet PS-1010MG - page 82

    5. Enter the “Printer T ype”, “Printer Addr ess” and “Q ueue Name” and sele ct the “Printer Model” to setup the MFP Server . Click “Add” to continue. Printer T ype: LPD/LPR Printer Address: Input the IP Address of the MFP Server Queue Name: The queue name of the MFP Server i s “lpt1”. Printer Model: Select the MFP or Printer ...

  • Planet PS-1010MG - page 83

    6. The MFP Server is installed completely . Y ou can see it in the “Printer List”. 7. Y ou can print a file to check whether the MFP Server is inst alled successfully . 78 ...

  • Planet PS-1010MG - page 84

    13. Troubleshooting 1. This product is not found even after search ing by the “MFP Server Control Manager”.  Check if the power adapter and the network cable are conne cted to the MFP Server properly .  Check if the LAN and Read y LEDs are turned on.  Chec k if the IP Address of the MFP Serv er is in the network segme nt as your comput ...

  • Planet PS-1010MG - page 85

    3. A user always connect s the MFP Server .  Check the “Id le T imeout” setting of the MFP Se rver from the right side of “MFP Server Control Manage r”. If the status is “Never T imeout”, please contact wit h your administrator to change the setting.  Contact with the current user an d as k the user to disconnect the device.  I ...

  • Planet PS-1010MG - page 86

    Appendix A: MFP Server Compatibility List The compatibility information is the first released i n December 2007. For th e latest information, please contact with your d eale r . Windows 2000 & XP Windows Vi sta 32/64 No. Brand Name MFP Model Print Scan Fax Card Reader Print Scan Fax Card Reader 1. HP CM1015MFP 3 3 N/A N/A 2. HP Desk Jet 895cxi ...

  • Planet PS-1010MG - page 87

    Windows 2000 & XP Windows Vist a 32/64 No. Brand Name MFP Model Print Scan Fax Card Reader Print Scan Fax Card Reader 34. HP PSC 2510 3 3 N/A 3 35. HP Photosmart 2575 3 3 N/A 3 3 N/A 3 36. HP Photosmart 2610 3 3 3 37. HP Photosmart 2710 3 3 3 38. HP Photosmart 31 10 3 3 3 3 39. HP Photosmart 3310 3 3 3 40. HP Photosmart 475 3 N/A N/A 3 41. HP P ...

  • Planet PS-1010MG - page 88

    Windows 2000 & XP Windows Vist a 32/64 No. Brand Name MFP Model Print Scan Fax Card Reader Print Scan Fax Card Reader 71. HP Office Jet 9100 3 3 3 72. HP Office Jet 9100 3 3 3 73. HP Office Jet L7380 3 3 N/A 3 N/A 74. HP Office Jet L7580 3 3 3 3 3 75. HP Office Jet J5780 3 N / A 3 N/A 76. HP Office Jet Pro K5400d n 3 N/A N/A N/A 3 N/A N/A N/A 7 ...

  • Planet PS-1010MG - page 89

    Windows 2000 & XP Windows Vist a 32/64 No. Brand Name MFP Model Print Scan Fax Card Reader Print Scan Fax Card Reader 109. CANON iP1200 3 N/A N/A N/A 3 N/A N/A N/A 110. CANON iP1880 3 N/A N/A N/A 3 N/A N/A N/A 111. CANON iP3300 3 N/A N/A N/A 3 N/A N/A N/A 112. CANON iP3500 3 N/A N/A N/A 3 N/A N/A N/A 113. CANON iP4300 3 N/A N/A N/A 3 N/A N/A N/ ...

  • Planet PS-1010MG - page 90

    85 Windows 2000 & XP Windows Vist a 32/64 No. Brand Name MFP Model Print Scan Fax Card Reader Print Scan Fax Card Reader 144. LEXMARK X7170 3 3 N/A 145. LEXMARK X7350 3 3 N/A 146. LEXMARK Z617 (GDI) 3 N/A N/A N/A 147. LEXMARK Z735 (GDI) 3 N/A N/A N/A 148. Brother MFC-210C 3 3 3 3 149. Brother MFC-215C 3 3 3 3 150. Brother MFC-2820 3 N/A 3 N/A 1 ...

Manufacturer Planet Category Printer

Documents that we receive from a manufacturer of a Planet PS-1010MG can be divided into several groups. They are, among others:
- Planet technical drawings
- PS-1010MG manuals
- Planet product data sheets
- information booklets
- or energy labels Planet PS-1010MG
All of them are important, but the most important information from the point of view of use of the device are in the user manual Planet PS-1010MG.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Planet PS-1010MG, service manual, brief instructions and user manuals Planet PS-1010MG. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Planet PS-1010MG.

Similar manuals

A complete manual for the device Planet PS-1010MG, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Planet PS-1010MG by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Planet PS-1010MG.

A complete Planet manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Planet PS-1010MG - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Planet PS-1010MG, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Planet PS-1010MG, that we can find in the current document
3. Tips how to use the basic functions of the device Planet PS-1010MG - which should help us in our first steps of using Planet PS-1010MG
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Planet PS-1010MG
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Planet PS-1010MG in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Planet PS-1010MG?

Use the form below

If you did not solve your problem by using a manual Planet PS-1010MG, ask a question using the form below. If a user had a similar problem with Planet PS-1010MG it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)