English dropdown-ico

Manual Linksys WIP330

87 pages 2.61 mb
Download

Go to site of 87

Summary
  • Linksys WIP330 - page 1

    A Division of Cisco Systems, Inc . ® User Guide Model No . WIP330 IP Phone Wir eless- G Voice ...

  • Linksys WIP330 - page 2

    ...

  • Linksys WIP330 - page 3

    Wireless-G IP Phone Copyright and T r ademarks Specificat ions are subject t o change without notice. Linksys is a registered trademar k or trademark o f Cisco Systems, Inc . and/or its affiliates in the U.S . and certain other countries. Copyright © 2005 Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or reg ...

  • Linksys WIP330 - page 4

    Wireless-G IP Phone Table of Contents Chapter 1: Introduction 1 Welcome 1 What’s in This User Guide? 1 Chapter 2: Getting to Know the Wireless-G IP Phone 3 The Bottom Panel 3 The Front and Side Panels 4 The Back Panel 6 Chapter 3: Installing and Us ing the Wireless-G IP Phone 7 Overview 7 Inserting the Battery into the Wireless-G IP Phone 7 Power ...

  • Linksys WIP330 - page 5

    Wireless-G IP Phone List of Figures Figure 2-1: Bottom Panel 3 Figure 2-2: Front Panel 4 Figure 2-3: Side Panel 5 Figure 2-4: Back Panel 6 Figure 3-1: Press the Button 7 Figure 3-2: Insert the Battery 7 Figure 3-3: Connect the Power 8 Figure 3-4: Front Panel 9 Figure 3-5: Scan for Wireless Networks 10 Figure 3-6: Select Wireless Network 10 Figure 3 ...

  • Linksys WIP330 - page 6

    Wireless-G IP Phone Figure 4-18: Network Settings - Fixed IP 29 Figure 4-19: Enter IP Address 29 Figure 4-20: Select Subnet Mask 29 Figure 4-21: Enter Subnet Mask 29 Figure 4-22: Select Phone Settings 30 Figure 4-23: Phone Settings 30 Figure 4-24: Ring Options 30 Figure 4-25: Ring Types 30 Figure 4-26: Keypad Tone 31 Figure 4-27: MSG Tone 31 Figure ...

  • Linksys WIP330 - page 7

    Wireless-G IP Phone 1 Chapter 1: Introduction Welcome Chapter 1: Introduction W elcome Thank you for choosing the Lin ksys Wireless-G IP Phone . It will allow you to make phone calls using your broadband connection, whether yo u are at home , in your office , or at a public hotspot. How does the I P Phone do this? It co nnects to your wirele ss rou ...

  • Linksys WIP330 - page 8

    Wireless-G IP Phone 2 Chapter 1: Introduction What’s in This User Guide? • Chapter 2: Getting to Know the Wireless- G IP Phone This chapter describes the physical features of the IP Phone. • Chapter 3: Installing and Us ing the Wireless-G IP Phone This chapter explains how to install the IP Phone and use it. • Chapter 4: Configuring the Wir ...

  • Linksys WIP330 - page 9

    Wireless-G IP Phone 3 Chapter 2: Getting to Know the Wireless-G IP Phone The Bottom Panel Chapter 2: Getting to Know the Wireless-G IP Phone The Bottom P anel The IP Phone’s headset jack and USB po rt ar e located on the bo ttom panel. Headset Jack This jack allows you to connect a headset. USB Port The USB port allows you to attach the included ...

  • Linksys WIP330 - page 10

    Wireless-G IP Phone 4 Chapter 2: Getting to Know the Wireless-G IP Phone The Front and Side Panels The Front and Side P anels The power LED is located at the top of the IP Phone, while its buttons are located on the front and side panels. Power LED Blue/Purple. The LED lights up blue when the IP Phone is powered on and ready . It flashes, alternati ...

  • Linksys WIP330 - page 11

    Wireless-G IP Phone 5 Chapter 2: Getting to Know the Wireless-G IP Phone The Front and Side Panels Po w e r O n / O f f o r End Call Press and hold this button for two seconds to power the IP Phone on or off . Ends the call or exits the current menu Speakerphone Switches to speakerphone (The speaker is located on the back of the IP Phone) Vol um e ...

  • Linksys WIP330 - page 12

    Wireless-G IP Phone 6 Chapter 2: Getting to Know the Wireless-G IP Phone The Back Panel The Back P anel The IP Phone’ s speaker (for the speakerphone feature) a nd batter y compartment are locate d on the back panel of the IP Phone . (The speaker is controlled by the speakerphone button on the side panel. For directio ns on how to insert the batt ...

  • Linksys WIP330 - page 13

    Wireless-G IP Phone 7 Chapter 3: Installing and Using the Wireless-G IP Phone Overview Chapter 3: Installing and Using the Wireless-G IP Phone Overview This chapter provides instructions for first-time installation and use of the IP Phone . Y ou will insert the battery into the IP Phone and then set it up for your wireless network and Inter net pho ...

  • Linksys WIP330 - page 14

    Wireless-G IP Phone 8 Chapter 3: Installing and Using the Wireless-G IP Phone Powering on the Wireless-G IP Phone P owering on the Wireless-G IP Phone Make sure you have the account information, including ne cessar y IP Phone settings, supplied by your Internet phone service provider . If you alread y have an account set up with your Internet phone ...

  • Linksys WIP330 - page 15

    Wireless-G IP Phone 9 Chapter 3: Installing and Using the Wireless-G IP Phone Powering on the Wir eless-G IP Phone 3. The power LED will flash, alter nating between bl ue and purple . For the initial charge , allow the battery to charge for at least 10 hours, so the batter y will have a full charge, which is indicated b y a solidly lit Power LED. T ...

  • Linksys WIP330 - page 16

    Wireless-G IP Phone 10 Chapter 3: Installing and Using the Wireless-G IP Phone Setting up the Wireless-G IP Phone Setting up the Wire less-G IP Phone Before you begin, make sure your network has an active Inter net connection. 1. Press and hold the Po we r O n / O f f button for two seconds. 2. The IP Phone will boot up and automa tically scan for ...

  • Linksys WIP330 - page 17

    Wireless-G IP Phone 11 Chapter 3: Installing and Using the Wireless-G IP Phone Setting up the Wireless-G IP Phone 4. The IP Phone will au tomatically co nnect to the network you have selected. If security is enabled on the selected network , a new screen will appear . Using the navigation pad, select the appropriate transmit key number and then mov ...

  • Linksys WIP330 - page 18

    Wireless-G IP Phone 12 Chapter 3: Installing and Using the Wireless-G IP Phone Setting up the Wireless-G IP Phone 6. The standby screen will appear . Select Menu . 7. Phone Settings will be highlighted. Na vigate the menu choices, and then se lect SIP Settings . (SIP stands for Session Initiati on Protocol.) Figure 3-10: Select Menu Figure 3-11: Se ...

  • Linksys WIP330 - page 19

    Wireless-G IP Phone 13 Chapter 3: Installing and Using the Wireless-G IP Phone Setting up the Wireless-G IP Phone 8. A list of SIP settings will be displa yed. For the Proxy IP setting, select Ed it . 9. Enter the Proxy IP address in the new window , and then select Save . Figure 3-12: Edit Proxy IP NOTE: The Proxy IP addr ess and other inform atio ...

  • Linksys WIP330 - page 20

    Wireless-G IP Phone 14 Chapter 3: Installing and Using the Wireless-G IP Phone Setting up the Wireless-G IP Phone 10. Scroll down to Pr oxy Port, and select Edit . 11. Enter the Proxy Port number address in the new window , and then select Save . 12. Scroll down to Regist er Proxy IP , and select Edit . 13. Enter the Register Proxy IP address in th ...

  • Linksys WIP330 - page 21

    Wireless-G IP Phone 15 Chapter 3: Installing and Using the Wireless-G IP Phone Setting up the Wireless-G IP Phone 14. Scroll down to Register Proxy Port, and select Edit . 15. Enter the Register Proxy Port number in the new window , and then select Sav e . 16. Scroll down to Outbound Proxy IP , and select Edit . 17. Enter the Outbound Proxy IP addr ...

  • Linksys WIP330 - page 22

    Wireless-G IP Phone 16 Chapter 3: Installing and Using the Wireless-G IP Phone Setting up the Wireless-G IP Phone 18. Scroll down to Outbound Proxy Port, and select Edit . 19. Enter the Outbound Proxy Port number in the new window , and then select Save . 20. If your Intern et phone service provider did not provide an Expire Time setting , then kee ...

  • Linksys WIP330 - page 23

    Wireless-G IP Phone 17 Chapter 3: Installing and Using the Wireless-G IP Phone Setting up the Wireless-G IP Phone 22. Scroll down to Phone Number , and select Edit . 23. Enter the Phone Number you will use for Inter net phone calls, and the n select Save . 24. Scroll down to Us er Name , and select Ed it . 25. Enter the User Name in the new window ...

  • Linksys WIP330 - page 24

    Wireless-G IP Phone 18 Chapter 3: Installing and Using the Wireless-G IP Phone Setting up the Wireless-G IP Phone 26. Scroll down to Password, and select Edit . 27. Enter the Password, and then select Sa ve . 28. On the SIP Settings screen, select Sav e . Figure 3-22: Save Pa s s w o rd Figure 3-23: Sav e SIP Settings ...

  • Linksys WIP330 - page 25

    Wireless-G IP Phone 19 Chapter 3: Installing and Using the Wireless-G IP Phone Setting up the Wireless-G IP Phone 29. Select Return to return to the standby screen. 30. The standby screen will indicate that the IP Phone is ready to make or receive phone calls. The installation of the Wireless-G IP Ph one is co mplete. Proceed to the next section, ? ...

  • Linksys WIP330 - page 26

    Wireless-G IP Phone 20 Chapter 3: Installing and Using the Wireless-G IP Phone Using the Wireless-G IP Phone Using the Wireless-G IP Phone T o make a call, enter the phone number you wa nt to call. Then press the Call button. When you are on a phone call, select Option to see a list of menu choices. Sele ct HangUp to end the call. T o change the vo ...

  • Linksys WIP330 - page 27

    Wireless-G IP Phone 21 Chapter 3: Installing and Using the Wireless-G IP Phone Using the Wireless-G IP Phon e Blind TFR . For a blind transfer , sel ect Blind TFR . Dial the number to which you want to trans fer the call. Select Blind TFR again. Then hang up. When you are on your call, select Blind TFR . A new window will appear . Enter the phone n ...

  • Linksys WIP330 - page 28

    Wireless-G IP Phone 22 Chapter 3: Installing and Using the Wireless-G IP Phone Using the Wireless-G IP Phone ...

  • Linksys WIP330 - page 29

    Wireless-G IP Phone 21 Chapter 4: Configuring the Wireless-G IP Phone Instructions f or Configuring the Wireless -G IP Phone Chapter 4: Configuring the Wireless-G IP Phone Instructions for Configuring the Wireless-G IP Phone Follow these instructions to configure the IP Phon e’s settings. Y ou will use these buttons to navigate menus and select y ...

  • Linksys WIP330 - page 30

    Wireless-G IP Phone 22 Chapter 4: Configuring the Wireless-G IP Phone Status Informatio n Status Information The standby screen will display a variety of informa tion about the IP Phone. Wireless Signal Strength At the top of the screen, the icon on the left indicates wireless signal strength. Tim e D i sp l a y The current time is shown. T o chang ...

  • Linksys WIP330 - page 31

    Wireless-G IP Phone 23 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Internet Phone Number The Internet ph one number of the IP Phone is shown. Menu Press the left softkey button to view the main menu. Its choices will be described in further details below . Phonebook Press the right softkey to access the Phoneb ...

  • Linksys WIP330 - page 32

    Wireless-G IP Phone 24 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Call Log Scroll through these choices and press the left softkey to make a selection. Select Return to return to the previous menu. Missed . A list of missed calls wi ll be displayed. Select Delete to delete a call. Select Return to return to t ...

  • Linksys WIP330 - page 33

    Wireless-G IP Phone 25 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Phone Book Y ou will see a li st of contacts (when you ha ve contacts in the Phone Book). Select Option to see menu choices. Select Return to return to the previous menu. Option Y ou have these choices: Edit (available when you have co ntacts i ...

  • Linksys WIP330 - page 34

    Wireless-G IP Phone 26 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Add . Select Add to add a new contact. Scroll through the diff erent settings: Name , Home Number , Office Number , Mobile Number , SIP-Home Number , SIP-Office Number , SIP-Mobile Number . For each setting, select Edit . Enter the a ppropriate ...

  • Linksys WIP330 - page 35

    Wireless-G IP Phone 27 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Call Option T o forwar d calls, select Forwa rding . Select Return to return to the previous menu. Forwarding Scroll through these choices and press the left softkey to make a selection. Se lect Save to return to the Call Option screen. Uncondi ...

  • Linksys WIP330 - page 36

    Wireless-G IP Phone 28 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Network Settings Y ou have two IP Modes available , DHCP and Fixed IP . In most cases, you should keep the default setting, DHCP , if your network router or gateway will assi gn IP addresses to the IP Phone . If you w ant to assign a static IP ...

  • Linksys WIP330 - page 37

    Wireless-G IP Phone 29 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Fixed IP If Fixed IP is selected as the IP Mode, the screen will show these settings: IP A ddress, Subnet Mask, Default Gateway , Primary DNS, and Secondary DNS. IP Address . T o add or change the IP Address, select Edit . Enter the new IP Addr ...

  • Linksys WIP330 - page 38

    Wireless-G IP Phone 30 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Phone Settings Y ou can customize the settings of the IP Phone . Y ou have these choices: Ring Option, Keypad T one , Wallpaper , Date & Tim e , Language , Power , and Upgrade . Select Return to return to the previous menu. Ring Option Scro ...

  • Linksys WIP330 - page 39

    Wireless-G IP Phone 31 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Keypad T one T o hear the actual keypad tone , scroll through these choi ces: Off , Soft, and Loud. The selected keypad tone is indicated by the <*> symbol. Highlight the keypad tone you want to select, and then select Settings to save yo ...

  • Linksys WIP330 - page 40

    Wireless-G IP Phone 32 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Date & Time Y ou have six choices: Date , Clock, Time Format, Clock T ype , T ime Zone , and NTP Server . Select Exit to return to the previous menu. Date . Press the left softkey to select the Date setting. A new window will be displayed. ...

  • Linksys WIP330 - page 41

    Wireless-G IP Phone 33 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Tim e Z o ne . Press the left softkey to select the Time Zone setting. A list of multiple time zones will be displayed. The selected time zone is indicated by the <*> symbol. Scroll through these choi ces, and highlight the time zone . Th ...

  • Linksys WIP330 - page 42

    Wireless-G IP Phone 34 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Language The selected language is indicated by the <*> symbo l. Highlight the language you want to select, and then press the left softkey to save your change . Select Exit to return to the Phone S ettings menu without changing the langua ...

  • Linksys WIP330 - page 43

    Wireless-G IP Phone 35 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Upgrade The IP Phone is pre-confi gured with the correct Download URL and OS Image File entries. Plug the USB mini-B connector of the included powe r adapter into the USB mini-B port of t he IP Phone . Then connect the power adapter to a standa ...

  • Linksys WIP330 - page 44

    Wireless-G IP Phone 36 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Wireless Y ou have two choices, Set Wi-Fi and Profiles. If you want to scan for wireless networks in your loc al area, select Set Wi-Fi . If you want to configure configuratio n profiles for different network setups, select Profiles . Press the ...

  • Linksys WIP330 - page 45

    Wireless-G IP Phone 37 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone The IP Phone will automatically conne ct to the network you have selected. If security is enabled on the sele cted network, a new screen will appear . Using th e navigation pad, select the appr opriate tran smit key number and then move to the ...

  • Linksys WIP330 - page 46

    Wireless-G IP Phone 38 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Profiles Y ou will see a li st of profiles (when you have profiles a lready configured). Select Option to see menu choices. Select Exit to return to the previous menu. Option Y ou have these choi ces: Edit (available when you have at least one ...

  • Linksys WIP330 - page 47

    Wireless-G IP Phone 39 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone transmit key number . Select Save to save the new transmit key number , or select Exit to return to the Edit Profile menu without changing the number . WEP Key . To e nt e r t he W E P K e y , s e l e ct Edit . Enter the new WEP Key in the new ...

  • Linksys WIP330 - page 48

    Wireless-G IP Phone 40 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Key Index . For the index of transmit keys, you ha ve a choice of 1-4. T o specify which WEP key the IP Phone will use, select Edit . A new window will open. Sc roll through the numbers, and select the a ppropriate transmit key number . Select ...

  • Linksys WIP330 - page 49

    Wireless-G IP Phone 41 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone SIP Settings SIP settings are used to configure your Internet phone service. The necessary setup information is supplied by your Internet phone service provider . If you do not have this information, contact your Internet phone se rvice provide ...

  • Linksys WIP330 - page 50

    Wireless-G IP Phone 42 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Outbound Proxy IP . T o add or change the Outbo und Proxy IP address, select Edit . Enter the new Outbound Proxy IP address in the new window . Select Save to save the new setting , or select Clear to delete a number on-screen. Outbound Proxy P ...

  • Linksys WIP330 - page 51

    Wireless-G IP Phone 43 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone User Name . T o add or change the User Name , select Edit . Enter the new User Name in the new window . Select Save to save the new setting , or select Clear to delete a c haracter o r number on - screen. Pa s s w o rd . T o add or change the P ...

  • Linksys WIP330 - page 52

    Wireless-G IP Phone 44 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Web S i t e A list of web sites will be shown. Scroll through th ese choices and press the left softkey to make a selection. Select Return to return to the previous menu. When the web site is displayed, use the navigation pad to control cursor ...

  • Linksys WIP330 - page 53

    Wireless-G IP Phone 45 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Informati on The status information of the IP Phone and its software is displayed on thi s read-only screen. Scroll through the settings to view them. Select Exit to return to the previous menu. Phone Number . Displa yed here is the Phone Numbe ...

  • Linksys WIP330 - page 54

    Wireless-G IP Phone 46 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone ...

  • Linksys WIP330 - page 55

    Wireless-G IP Phone 45 Appendix A: Troubleshooting Common Problems and Solutions Appendix A: T roubleshooting This appendix provides solutions to problems that may occur during the installation and operation of the Wireless-G IP Phone . Read the description b elow to solve your problems. If you can't find an answer here , check the website of ...

  • Linksys WIP330 - page 56

    Wireless-G IP Phone 46 Appendix A: Troubleshooting Common Problems and Solutions If you have a non-Linksys router , refer to its document ation for instructions. If you ha ve a Linksys router , then follow these instructions: 1. On one of your networked computers, open your web browser . 2. Access the Router’s W eb-ba sed Utility by going to http ...

  • Linksys WIP330 - page 57

    Wireless-G IP Phone 47 Appendix A: Troubleshooting Common Problems and Solutions 2. When I make a telephone call, the call do esn’t go through; in stead, I hear a fast busy signal. Go through this checklist until your problem is solved: • Follow these instructions to reboot your cable or DSL modem, IP Phone, and router: 1. Power off your cable ...

  • Linksys WIP330 - page 58

    Wireless-G IP Phone 48 Appendix A: Troubleshooting Common Problems and Solutions 6. Select the protocol you will be using, UDP . 7. Enter the IP address of the IP Phone . For example, if the IP Phone’ s IP address is 192.168.1.100, you would enter 100 in the field provided. 8. Repeat steps 5-7 until you have entered all four port ranges for the I ...

  • Linksys WIP330 - page 59

    Wireless-G IP Phone 49 Appendix A: Troubleshooting Common Problems and Solutions • There may not be enough bandwidth available for your Internet phone call. Y ou may want to test your bandwidth using one of the bandwidth tests availabl e online . If necessary , ac cess your ser vice account at your Internet phone ser vice provider’s website , a ...

  • Linksys WIP330 - page 60

    Wireless-G IP Phone 50 Appendix A: Troubleshooting Common Problems and Solutions If you have a non-Linksys router , refer to its document ation for instructions. If you ha ve a Linksys router , then follow these instructions: 1. On one of your networked computers, open your web browser . 2. Access the Router’s W eb-ba sed Utility by going to http ...

  • Linksys WIP330 - page 61

    Wireless-G IP Phone 51 Appendix A: Troubleshooting Frequently Asked Questions 5. The power LED does not light up. Go through this checklist until your problem is solved: • Unplug the power adapter from the IP Phone . Wa it five seconds. Re-connect the power adapter . • Y ou may be using the wrong power adapter . Make sure the power adapter you ...

  • Linksys WIP330 - page 62

    Wireless-G IP Phone 52 Appendix A: Troubleshooting Frequently Asked Questions ...

  • Linksys WIP330 - page 63

    Wireless-G IP Phone 53 Appendix B: Glossary Appendix B: Glossar y This glossary contains some basic netw orking terms you may come ac ross when using this product. For more advanced terms, see the complete Linksys glossary at http://www .linksys.com/glossary . Access Po int - A device that allows wireless-equi pped computers and other devices to co ...

  • Linksys WIP330 - page 64

    Wireless-G IP Phone 54 Appendix B: Glossa ry DMZ ( D e m ilitarized Z one) - Removes the Router's firewall protection from one PC, allowing it to be “seen” from the Internet. DNS ( D omain N ame S erver) - The IP address of your ISP's server , which translates the names of websi tes into IP addresses. Domain - A specific name for a ne ...

  • Linksys WIP330 - page 65

    Wireless-G IP Phone 55 Appendix B: Glossary ISP ( I nternet S er vice P rovider) - A company that prov ides access to the Internet. LAN - The computers and networking produc ts that make up your local network. MAC ( M edia A ccess C ontrol) Address - The unique address that a manufacturer assigns to each networking device . Mbps ( M ega B its P er ...

  • Linksys WIP330 - page 66

    Wireless-G IP Phone 56 Appendix B: Glossa ry Switch - 1. A data switch that conn ects com puting devices to host computers, allowi ng a large number of devices to share a limited number of ports. 2. A device fo r making, br eaking, or cha nging the connections in an electrical cir cuit. TCP ( T ransmission C ontrol P rotocol) - A network protocol f ...

  • Linksys WIP330 - page 67

    Wireless-G IP Phone 57 Appendix C: Specifications Appendix C: Specifications Model WIP330 Standards 802.11b , 802.11g Channels 11 Channels (US , Canada), 13 Channels (Europe) T ransmit Power 12 dBm for 802.11b and 802.11g @ Normal T emp Range External Interface One Mini USB 1.1 Port, One Stereo Ear Phone J ack Display 2.2 inch (55.9 mm) (240 x 320 ...

  • Linksys WIP330 - page 68

    Wireless-G IP Phone 58 Appendix C: Specifications DTMF T ransmission In-band, Out-band (RFC2833) Voice Quality Acoustic Echo Cancellation Jitter Buffer Control Comfortable Noise Generation Packet Loss Concealment Dimensions 1.84" x 5.32" x 0.74" (W x H x D) (46.7 mm x 135.2 mm x 18.8 mm) Unit Weight 4.20 oz. (0.12 kg) Power 3.7V , 12 ...

  • Linksys WIP330 - page 69

    Wireless-G IP Phone 59 Appendix D: Warranty Information Appendix D: W arranty Information LIMITED WARRANTY Y our Inter net phone service provider warran ts to Y o u that, for a period of one year (the “W arranty Period”), y our Linksys Produ ct will be substantially free of defects in materials and workmans hip under normal use. Y o ur exclusiv ...

  • Linksys WIP330 - page 70

    Wireless-G IP Phone 60 Appendix D: Warranty Information ...

  • Linksys WIP330 - page 71

    Wireless-G IP Phone 61 Appendix E: Regulatory Information Appendix E: Regulator y Information FCC Statement This product has been tested a nd complies with the specificatio ns for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against har mful interference in a residential ...

  • Linksys WIP330 - page 72

    Wireless-G IP Phone 62 Appendix E: Regulatory Information Safety Notices Caution: T o reduce the risk of fire , use only No. 26 A WG or larger tele communication line cord. Do not use this product near water , for example , in a wet basement or near a swimming pool. Avoid using this product during an electrical storm. There may be a remote risk of ...

  • Linksys WIP330 - page 73

    Wireless-G IP Phone 63 Appendix E: Regulatory Information User Information for Consumer Products Covered by EU Dire ctive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE) This document contains import ant infor mation for users with regards to th e proper disposal and rec ycling of Linksys products. Consumers are required to comply with ...

  • Linksys WIP330 - page 74

    Wireless-G IP Phone 64 Appendix E: Regulatory Information ...

  • Linksys WIP330 - page 75

    Wireless-G IP Phone 65 Appendix E: Regulatory Information ...

  • Linksys WIP330 - page 76

    Wireless-G IP Phone 66 Appendix E: Regulatory Information ...

  • Linksys WIP330 - page 77

    Wireless-G IP Phone 67 Appendix E: Regulatory Information ...

  • Linksys WIP330 - page 78

    Wireless-G IP Phone 68 Appendix E: Regulatory Information ...

  • Linksys WIP330 - page 79

    Wireless-G IP Phone 69 Appendix E: Regulatory Information ...

  • Linksys WIP330 - page 80

    Wireless-G IP Phone 70 Appendix E: Regulatory Information ...

  • Linksys WIP330 - page 81

    Wireless-G IP Phone 71 Appendix E: Regulatory Information ...

  • Linksys WIP330 - page 82

    Wireless-G IP Phone 72 Appendix E: Regulatory Information ...

  • Linksys WIP330 - page 83

    Wireless-G IP Phone 73 Appendix E: Regulatory Information ...

  • Linksys WIP330 - page 84

    Wireless-G IP Phone 74 Appendix E: Regulatory Information For more information, visit w ww .linksys.com. ...

  • Linksys WIP330 - page 85

    Wireless-G IP Phone 75 Appendix F: Contact Information Appendix F: Contact Information Need to contact Linksys? Visit us online for information on the latest prod ucts and updates to your existing products at: http://www .linksys.com or ftp.linksys.com Can't find information about a product you want to buy on the web? Do you want to know more ...

  • Linksys WIP330 - page 86

    Wireless-G IP Phone 76 Appendix F: Contact Information ...

  • Linksys WIP330 - page 87

    www .linksys.com ...

Manufacturer Linksys Category IP Phone

Documents that we receive from a manufacturer of a Linksys WIP330 can be divided into several groups. They are, among others:
- Linksys technical drawings
- WIP330 manuals
- Linksys product data sheets
- information booklets
- or energy labels Linksys WIP330
All of them are important, but the most important information from the point of view of use of the device are in the user manual Linksys WIP330.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Linksys WIP330, service manual, brief instructions and user manuals Linksys WIP330. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Linksys WIP330.

Similar manuals

A complete manual for the device Linksys WIP330, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Linksys WIP330 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Linksys WIP330.

A complete Linksys manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Linksys WIP330 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Linksys WIP330, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Linksys WIP330, that we can find in the current document
3. Tips how to use the basic functions of the device Linksys WIP330 - which should help us in our first steps of using Linksys WIP330
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Linksys WIP330
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Linksys WIP330 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Linksys WIP330?

Use the form below

If you did not solve your problem by using a manual Linksys WIP330, ask a question using the form below. If a user had a similar problem with Linksys WIP330 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)