-
TP-Link td-w8951nd - page 1
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router Rev: 4.0.0 1910010890 ...
-
TP-Link td-w8951nd - page 2
COPYRIGHT & TRADEMARKS Specifications are subjec t to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other br ands and product names are trademarks or registered trademarks of t heir respective holders. No part of the specific ations may be reproduced in any form or by any means or used to m ake any derivativ ...
-
TP-Link td-w8951nd - page 3
FCC STATEMENT This equipment has been tested and found to comply wi th the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gen erates, uses and can radiate radio frequency energy and, if no ...
-
TP-Link td-w8951nd - page 4
CE Mark Warning This is a class B product. In a domestic environmen t, this product may cause radio interference, in which case the user may be required to take adequate measure s. Canadian Compliance Statement This device complies with Industry Canada license- exempt RSS standard(s). Operation is subject to the following two conditions: (1) This d ...
-
TP-Link td-w8951nd - page 5
당해 무선설비는 운용중 전파혼신 가능성이 있음. NCC Notice & BSMI Notice 注意！ 依據 低功率電波輻射性電機管理辦法 第十二條 經型式認證合格之低功率射頻電機， 非經許可， 公司、 商號或使用者均不得擅自變更頻率、 加大功率或變更原設計之特性或功能。 第? ...
-
TP-Link td-w8951nd - page 6
TP-LINK TECHNOLOGIES CO., L TD TP-LINK TECHNOLOGIES CO., LTD. Building 24 (floors 1, 3, 4, 5), and 28 (floors 1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China DECLARA TION OF CONFORMITY For the following equipment: Product Description: 150Mbps Wireless N ADSL2+ Modem Router Model No.: TD-W8951ND T rademark: TP-LINK We ...
-
TP-Link td-w8951nd - page 7
CONTENTS Package Cont ents .................................................................................................... 1 Chapter 1. Introducti on ......................................................................................... 2 1.1 Product Over view ................................................................................. ...
-
TP-Link td-w8951nd - page 8
4.5.2 Filter ......................................................................................................... 53 4.5.3 SNMP ...................................................................................................... 62 4.5.4 UPnP .................................................................................................... ...
-
TP-Link td-w8951nd - page 9
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide 1 Package Contents The following contents should be found in your package: ¾ One TD-W8951ND 150 Mbps Wireless N ADSL2+ Modem Router ¾ One Power Adapter for TD-W8951N D 150Mbps Wireless N ADSL2+ Modem Router ¾ Quick Installation Guide ¾ One RJ45 cable ¾ Two RJ11 cables ¾ One ADSL spl ...
-
TP-Link td-w8951nd - page 10
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Chapter 1. Introduction Thank you for choosing the TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router . 1.1 Product Overview The device is designed to provide a simple and cost-effective ADSL Internet connection for a private Ethernet or IEEE 802.11n/ IEEE 802.11g/ IEEE 802.11b wireless ne ...
-
TP-Link td-w8951nd - page 11
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide ¾ Downstream data rates up to 24Mbps, upstream data rates up to 3.5Mbps （ With Annex M enabled ） . ¾ Supports long transfers, the max line length can reach to 6.5Km. ¾ Supports remote configurati on and manag ement through SNMP and CWMP. ¾ Supports PPPoE, it allows connecting the ...
-
TP-Link td-w8951nd - page 12
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Chapter 2. Hardware Installation 2.1 The Front Panel Figure 2-1 The LEDs locate on the front panel. They indicate the device’s working st atus. For details, please LED Explanation: Name Status Indication On The modem router is powered on. (Power) Off The modem router is off. Please ens ...
-
TP-Link td-w8951nd - page 13
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide ) Note: 1. If the ADSL LED is off, please check your Internet connection first. Refer to 2.4 Connecting the Modem Router for more information about how to ma ke Internet connection correctly. If you have already made a right c onn ection, please cont act your ISP to make sure if your Inte ...
-
TP-Link td-w8951nd - page 14
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Method one : With the modem router powered on, us e a pin to press and hold the Reset button for at least 5 seconds. And the modem router will reboot to its factory default settings. Method two : Restore the default setting from “M aintenance-SysRestart” of the mo dem router's We ...
-
TP-Link td-w8951nd - page 15
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 2-3 W all-mount Install ) Note: The diameter of the screw, 3.5mm<D<7.8mm, and the distance of two screws is 107.5mm. The screw that project from the wall need around 4mm based, and the length of the screw need to be at least 20mm to withstand t he weight of the product. 2.4 C ...
-
TP-Link td-w8951nd - page 16
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide • PHONE: Connect to the phone sets • MODEM: Connect to the ADSL port of TD-W8951ND Plug one end of the twisted-pair ADSL cable into the ADSL port on the rear panel of TD-W8951ND. Connect the other end to the MODEM port of the external splitter. Step 2: Connect the Ethernet cable. Atta ...
-
TP-Link td-w8951nd - page 17
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Chapter 3. Quick Installation Guide 3.1 Configure PC After you directly connect your PC to the TD-W8951ND or connect your ad apter to a Hub/Switch which has connected to the modem router, you need to configure your PC’s IP address. Follow the steps below to configure it. Step 1: Click t ...
-
TP-Link td-w8951nd - page 18
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 3-2 Step 3: Select General tab, highlight Internet Protoc ol (TCP/IP), and then click the Properties button. Figure 3-3 10 ...
-
TP-Link td-w8951nd - page 19
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Step 4: Configure the IP address as Figure 3-4 shows. After that, click OK . Figure 3-4 ) Note: You can c onfigure the PC to get an IP address autom atically, select “Obtain an IP address automatically” and “Obtain DNS server addre ss automatically” in the screen above. Now, you c ...
-
TP-Link td-w8951nd - page 20
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 3-5 If the result displayed is similar to the screen shown belo w, it means t hat your PC has not connected to the modem router. Figure 3-6 You can check it follow the steps below: 1) Is the connection between your PC and the modem router correct? The LEDs of LAN port which you lin ...
-
TP-Link td-w8951nd - page 21
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 3-7 Step 1: Select the Quick Start tab, then click RUN WIZARD , and you will see the next screen. Click the NEXT button. Figure 3-8 Step 2: Configure the time for the m odem router, and then click the NEXT button. Figure 3-9 Step 3: Select the connection type to connect to the ISP ...
-
TP-Link td-w8951nd - page 22
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 3-10 Step 4: Configure the following options provided by your I SP: Username , Password , VPI , VCI and Connection Type . Then click NEXT . Figure 3-1 1 Step 5: Configure the rules for the WLAN, and click NEXT . 14 ...
-
TP-Link td-w8951nd - page 23
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 3-12 ) Note: If the Access Point is activated, the wireless f unction will be available even without the external antenna because of an additional prin ted antenna. To adopt the wi reless security protection measures, please refer to 4.3.3 Wireless . Step 6: Click NEXT to finish th ...
-
TP-Link td-w8951nd - page 24
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Chapter 4. Software Configuration This User Guide recommends using the “Quick Installation Guide” for first-time installation. For advanced users, if you want to know more ab o ut this device and make use of its functions adequately, maybe you will get help from this chapter to c onfi ...
-
TP-Link td-w8951nd - page 25
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-2 ) Note: Click the other submenus System Log or Statistics in Figure 4-2 , and you will be able to view the system log and traffic statistics about the modem router. 4.1.2 System Log Choose “ Status → System Log ” menu, and you will be able to query the logs of the modem r ...
-
TP-Link td-w8951nd - page 26
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-3 The modem router can keep logs of all traffic. Y ou can query th e logs to find what happene d to the Router. Click the CLEAR LOG button to clear the logs. Click the SAVE LOG button to save the logs. 4.1.3 Statistics Choose “ Status → Statistics ” menu, and you will be ab ...
-
TP-Link td-w8951nd - page 27
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-4 ¾ Interface: You can select Ethernet , ADSL and WLAN to view the corresponding network traffic over different ports. ¾ Select Ethernet , and you will see the statistics table as below. Statistics Table: Transmit Frames The frames transmitted over the Ethernet port. Transmit M ...
-
TP-Link td-w8951nd - page 28
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide ¾ Select ADSL , and you will see the statistics table as below. Statistics Table: Transmit total PDUs The total PDUs transmitted over the ADSL port. Transmit Statistics Transmit total Error Counts The total errors occurred ov er the ADSL port when dat a is being transmitted. Receive tota ...
-
TP-Link td-w8951nd - page 29
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide 4.3 Interface Setup Choose “ Interface Setup ”, you can see the next submenus: Internet , LAN and Wireless . Figure 4-5 Click any of them, and you will be able to configure the corre sponding function. 4.3.1 Internet Choose “ Interface Setup → Internet ” menu, you can conf igure ...
-
TP-Link td-w8951nd - page 30
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-6 ¾ ATM VC: ATM settings are used to connect to your ISP. Your ISP provides VPI (Vir tual Path Identifier), VCI (Virtual Channel Identif ier) settings to you. In this Device, you can totally setup 8 VCs on different encapsulations, if you apply 8 different virtual circuits from ...
-
TP-Link td-w8951nd - page 31
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide • VPI: Identifies the virtual path between endpoints in an ATM network. The valid range is from 0 to 255. Please input the value provided by your ISP. • VCI: Identifies the virtual channel endpoints in an ATM network. The valid range is from 32 to 65535 (1 to 31 is reserved for well- ...
-
TP-Link td-w8951nd - page 32
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide ¾ Default Route: If enable this function, the current PVC will be considered as the default gateway to internet from this device. ¾ TCP MTU Option: Enter the TCP MTU as your desire. ¾ Dynamic Route: Select this option to s pecify the RIP (Routing Info rmation protocol) version for WAN ...
-
TP-Link td-w8951nd - page 33
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide ) Note: Each IP address entered in the fields must be in t he appropriate IP form, which is four IP octets separated by a dot (x.x.x.x), su ch as 192.168.1.100. The modem r outer will not accept the IP address if it is not in this format. 3) PPPoA/PPPoE Select this option if your ISP requ ...
-
TP-Link td-w8951nd - page 34
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide ¾ Password: Enter your password for your PPPoA/PPPoE connection. ¾ Encapsulation: For both PPPoA/PPPoE connection, y ou need to specify the type of Multiplexing, either LLC or VC Mux. ¾ Bridge Interface: Activate the option, and the modem router can also work in Bridge mode. ¾ Connect ...
-
TP-Link td-w8951nd - page 35
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-1 1 ¾ Router Local IP: These are the IP settings of the LAN interface for the device. These settings may be referred to as Private settings. You may change the LAN IP address if needed. The LAN IP address is private to your internal network and cannot be seen on the Internet. ? ...
-
TP-Link td-w8951nd - page 36
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide means the ADSL modem router will only send but will not accept RIP packet. • Multicast: Select IGMP version, or disable the function. IGMP (Internet Group Multicast Protocol) is a session-layer prot ocol used to establish member ship in a multicast group. The ADSL ATU-R supports both IG ...
-
TP-Link td-w8951nd - page 37
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide be able to obtain IP address automatically al thou gh the DHCP function is enabled. All the ports are checked by default. • DNS Relay: If you want to disable this feature, you just need to set both Primary a nd secondary DNS IP to 0.0.0.0. If you want to use DNS relay, you can setup DNS ...
-
TP-Link td-w8951nd - page 38
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-14 ). Please configure the parameters for wi reless according to the descriptions below. Figure 4-14 30 ...
-
TP-Link td-w8951nd - page 39
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide ¾ Access point Settings: These are the settings of the ac cess point. You c an configure the rules to allow wireless-equipped computers and other devices to communicate with a wireless network. • Access point: Select Activated to allow wireless st ation to associate with the access poi ...
-
TP-Link td-w8951nd - page 40
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide ¾ 11n Settings: These are the settings of the 11n par ameters. If “802.11n”, “802.11g+n” or “802.11b+g+n” is selected for Wireless mode , these settings will be displayed. • Channel Bandwidth: Select the Bandwidth you want to use from the drop-down List. There are two optio ...
-
TP-Link td-w8951nd - page 41
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide 1) WEP-64Bits To configure WEP-64Bits settings, select the WEP-64Bits option from the drop-down list. The menu will change to offer the appropriate settings . WEP-64Bits is a data privacy mechanism based on a 64-bit shared key algorithm, as described in the IEEE 802.11g standard. Figure 4 ...
-
TP-Link td-w8951nd - page 42
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-18 ¾ Encryption: Select the encryption you want to use: TKIP/AES, TKIP or AES (AE S is an encryption method str onger than TKIP). • TKIP ( T emporal K ey I ntegrity P rotocol) - a wireless encrypti on protocol that provides dynamic encryption keys fo r each packet transmitted. ...
-
TP-Link td-w8951nd - page 43
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-20 4.3.3.1 WPS Settings ¾ WPS Settings: WPS can help you to add a new wireless device to an existing network quickly. This section will gui de you how to use WPS function. • WPS state: Display the current WPS state. • WPS mode: If the wireless adapter supports Wi-F i Protect ...
-
TP-Link td-w8951nd - page 44
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Step 2: Press and hold the WPS button of the adapt er directly for 2 or 3 seconds. Step 3: Wait for a while until the next screen appears. Click Finish to complete the WPS configuration. The WPS Configuration Screen of Wireless Adapter Method Two: Step 1: Press the WPS button on the front ...
-
TP-Link td-w8951nd - page 45
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide The WPS Configuration Screen of Wireless Adapter Step 3: Wait for a while until the next screen appears. Click Finish to complete the WPS configuration. The WPS Configuration Screen of Wireless Adapter 2) PIN code If the wireless adapter supports Wi -Fi Protected Setup and the PIN method, ...
-
TP-Link td-w8951nd - page 46
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-22 Method One: Enter the PIN into my modem router Step 1: For the confi guration of the wirele ss adapter, please choose “ Enter a PIN into my access point or a registrar ” in the configuration utility of the WPS, and get the PIN code on the screen as below, then click Next. ...
-
TP-Link td-w8951nd - page 47
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-23 Method Two: Enter the PIN from my modem router Step 1: Get the Current PIN code of the modem router fro m AP self PIN code in Figure 4-23 (each modem router has its unique PIN c ode. Here takes the PIN code 66933762 of this modem router for example). Step 2: For the confi gura ...
-
TP-Link td-w8951nd - page 48
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide is the same for all stations in your wireless network. Type the desired SSID in the space provided. • Authentication Type: Select an authentication type fr om the drop-down list, which allows you to configure security features of the wireless LAN interface. Options available are: Disabl ...
-
TP-Link td-w8951nd - page 49
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-25 ¾ Firewall: Select this option can aut omatically detect and block Denial of Service (DoS) attacks, such as Ping of Death, SYN Flood, Port Scan and Land Attack. ¾ SPI: If you enable SPI, all traffics in itiated from WAN would be blo cked, including DMZ, Virtual Server, and A ...
-
TP-Link td-w8951nd - page 50
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide ¾ Destination IP Address: This parameter specifies the IP network address of the final destination. ¾ IP Subnet Mask: Enter the subnet mask for this destination. ¾ Gateway IP Address: Enter the IP address of the gatew ay. The gateway is an immediate neighbor of your ADSL modem router t ...
-
TP-Link td-w8951nd - page 51
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide ) Note: For VCs with single IP, they share the same DMZ and Virtual servers; for VCs with multiple IPs, each VC can set DMZ and Virtual servers. Furthermo re, for VCs with multiple IPs, they c an define the Address Mapping rules; for VCs with single IP, since they have only o ne IP, there ...
-
TP-Link td-w8951nd - page 52
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-30 ¾ Rule Index: The Virtual server rule index for this VC. You can specify 10 rules in maximum. All the VCs with single IP will use the same Virtual Server rules. ¾ Application: The Virtual servers can be used for se tting up public services on your LAN. ¾ Protocol: The proto ...
-
TP-Link td-w8951nd - page 53
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Click the BACK button to return to the previous screen. Click the CANCEL button to cancel the configur ation which is made just now. 4.4.3.3 IP Address Mapping Select Multiple for numbers of IPs in Figure 4-28 , and choose “ Advanced Setup → NAT → IP Address Mapping(for Multiple IP ...
-
TP-Link td-w8951nd - page 54
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Step 2: Select the Rule index for the rule as shown in Figure 4-31 . Step 3: Select the rule type you want from the drop-down list. Step 4: Enter the local and public IP addresses in the corresponding fields. Step 5: After that, click SAVE to make the entry take effect. Other operations f ...
-
TP-Link td-w8951nd - page 55
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-32 ¾ QoS: Select this option to Activa te/Deactivate the IP QoS on different types (IP ToS and DiffServ). ¾ Summary: Click the button to view t he configurations of QoS. ¾ Rule: Configure the rules for QoS. If the traffic co mplies with the rule, then the modem router will tak ...
-
TP-Link td-w8951nd - page 56
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide • Physical Po rts: Select the port whose traffic fl ow ar e controlled by the rule. • Destination MAC & IP & Mask & Port Range: Enter the IP information about the Destination host for the rule. • Source MAC & IP & Mask & Port Range: Enter the IP information a ...
-
TP-Link td-w8951nd - page 57
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Virtual LAN (VLAN) is a group of devi ces on one or more LAN s that are configured so that they can communicate as if they were attached to t he same LAN, when in fact they are located on a number of different LAN segment s. Because VLANs are based on logical instead of physical connectio ...
-
TP-Link td-w8951nd - page 58
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-34 ¾ PVID: Each physical port has a default VID ca lled PVID (Port VID). PVID is assigned to untagged frames or priority tagged frames (frame s with null (0) VID) received on this port. 2) Define VLAN Group Click Define VLAN Group in Figure 4-33 , you can define VLAN groups in t ...
-
TP-Link td-w8951nd - page 59
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-35 ¾ VLAN Index: Select the VLAN index for this VC. You can specify 8 gr oups in maximum. ¾ VLAN ID: This indicates the VLAN group. ¾ ATM VCs: Select the ATM VCs as members of VLAN , and if you leave the Tagged blank, the tag in frames will be deleted wh en transmitted from th ...
-
TP-Link td-w8951nd - page 60
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-36 ¾ ADSL Mode: Select the ADSL operation mode wh ich your ADSL connection uses. ¾ ADSL Type: Select the ADSL operation type wh ich your ADSL connection uses. 4.5 Access Management Choose “ Access Management ”, you can see t he next submenus: Figure 4-37 Click any of them, ...
-
TP-Link td-w8951nd - page 61
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-38 ¾ ACL: If Activated , the IP addresses which are contai ned in the Access Control List can access to the modem router. If Deactivated , all IP addresses can acce ss to the modem router. ¾ ACL Rule Index: Select the ACL rule index for the entry. ¾ Active: Enable the ACL rule ...
-
TP-Link td-w8951nd - page 62
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-39 ¾ Filter Type Selection: Select the fil ter type fo r the configuration below. ¾ IP/MAC Filter Set Index: Select the Set index for the IP Filter entry. This index can match with six IP / MAC Filter Rule Indexes. ¾ Interface: Select the interface for the entry. ) Note: If se ...
-
TP-Link td-w8951nd - page 63
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide ¾ Direction: Select the direction for this IP Filter ru le. There are three filtering directions: Both, Incoming, Outgoing. ) Note: Incoming means that IP traffic which is coming into the modem router, and the Outgoing mean s that IP traffic which is going out the modem router. ¾ IP/MAC ...
-
TP-Link td-w8951nd - page 64
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Select the “IP” as the Rule Type on the Filt er screen, then you can c onfigure the specific rule for the example. Step 2: Select the IP/MAC Filter Set Index and IP/MAC Filter Rule Index for the rule, then select the Interface “PVC0”, and select t he Direction “Both” for the f ...
-
TP-Link td-w8951nd - page 65
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide After you complete the IP filter rules for the exam ple, the Filter list will show as follows. You can enter the IP / MAC Filter Set Index to view the information about the rule. Other operations for the entries as show n in Figure 4-39 : Select the IP / MAC Filter Set Index and IP/MAC F ...
-
TP-Link td-w8951nd - page 66
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide ¾ Rule Type: Select MAC for the MAC Filter rule. ¾ Active: Select “Yes” to make t he rule to take effect. ¾ MAC Address: Enter the MAC address for the rule. ¾ Rule Unmatched: If the current rule can not match, and you select Forward , the modem router will skip the rule and transm ...
-
TP-Link td-w8951nd - page 67
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Step 5: Go to Step 2 to co nfigure the next rule: Block the PC with MAC address 00-0A-EB-00-07-5F to access the Internet. ) Note: After you complete the MAC filter rules for the exam ple, the Filter list will show as follows. You can enter the IP / MAC Filter Set Index to view the informa ...
-
TP-Link td-w8951nd - page 68
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide 4.5.2.4 URL Select Application Filter as the Filter type (shown in Figure 4-42 ), and then you c an configure the filter rules based on URL. Figure 4-42 ¾ Filter Type Selection: Select the URL Filter fo r the next configuration. ¾ Active: Select “Yes” to make t he rule to take effec ...
-
TP-Link td-w8951nd - page 69
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Step 2: Select the Index for the rule, and then enter the website in the URL field. Step 3: Finally, Select Yes to active the rule, and then click the SAVE to save the entry. Other operations for the entries as show n in Figure 4-39 : Select the URL Index to view or modify the entry. Sele ...
-
TP-Link td-w8951nd - page 70
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-44 ¾ UPnP: Activate or Deactivate the UPnP function. Only when the function is activated, can the UPnP take effect. ¾ Auto-Configure: If you activate the function, t hen the UPnP network devices can automatically configure network addr essing, announce their presence in the n e ...
-
TP-Link td-w8951nd - page 71
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide 4.5.6 CWMP Choose “ Access Management → CW MP ”, you can configure the CWMP function in the screen (shown in Figure 4-46 ). The modem router offers CWMP feature. The functi on supports TR-069 protocol which collects information, diagnoses the dev ices and configures the devic es aut ...
-
TP-Link td-w8951nd - page 72
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide 4.6 Maintenance Choose “ Maintenance ”, you can see the next submenus: Figure 4-47 Click any of them, and you will be able to configure the corre sponding function. 4.6.1 Administration Choose “ Maintenance → Administration ”, you can set new password for admin in the screen (sh ...
-
TP-Link td-w8951nd - page 73
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide dates. 1) NTP Server automatically Select NTP Server automatically as the Synchronize time, you only need to set the time zone. Figure 4-49 ) Note: The ADSL modem rout er built-in some NTP Serv ers, when the modem router connects to the Internet, the modem router will get the system ti me ...
-
TP-Link td-w8951nd - page 74
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-50 3) Manually Select Manually as the Synchronize time, you need to se t the date and time corresponding to the current time. Figure 4-51 4.6.3 Firmware Choose “ Maintenance → Firmware ”, you can upgrade the firmware of the modem router in the screen (shown in Figure 4-52 ) ...
-
TP-Link td-w8951nd - page 75
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-52 To upgrade the modem router's firmware , follow these instructions below: Step 1: Type the path and file name of t he update file into the “New Firmware Location” field. Or click the Browse button to locate the update file. Step 2: Click the UPGRADE button. ) Note: 1) ...
-
TP-Link td-w8951nd - page 76
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-53 Step 2: Save the file as the appointed file (shown in Figure 4-54 ). TD-W8951ND Figure 4-54 To restore the modem router’s settings: Step 1: Click the Browse button to locate the update file for the device, or enter the exact path in “New Romfile Location” field. Step 2: ...
-
TP-Link td-w8951nd - page 77
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide 4.6.4 SysRestart Choose “ Maintenance → SysR estar t ”, you can select to restart t he device with current settings or restore to factory default settings in the screen (shown in Figure 4-55 ). Figure 4-55 4.6.5 Diagnostics Choose “ Maintenance → Diagnostics ”, you can view th ...
-
TP-Link td-w8951nd - page 78
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-56 4.7 Help Choose “ Help ”, you can view the help information for configuration of any function. 70 ...
-
TP-Link td-w8951nd - page 79
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-57 ) Note: Click the tab, and you will be able to get the corresponding information. 71 ...
-
TP-Link td-w8951nd - page 80
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Appendix A: Specifications General Standards and Protocols ANSI T1.413, ITU G.992.1, ITU G. 992.2, ITU G.992.3, ITU G.992.5, IEEE 802.11b, IEEE 802.11g, I EEE 802.11n, IEEE 802.3, IEEE 802.3u, TCP/IP, PPPoA, PPPoE, SNTP, HTTP, DHCP, ICMP, NAT Safety & Emission FCC, CE Ports Four 10/10 ...
-
TP-Link td-w8951nd - page 81
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Appendix B: Troubleshooting T1. How do I rest ore my modem router’s configuration to its factory default settings? With the modem router powered on, press and hold the RESET button on the rear pa nel for 8 to 10 seconds before releasing it. ) Note: Once the modem router is reset, the cu ...
-
TP-Link td-w8951nd - page 82
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Click Network Connections Right-click Local Area Connection Click Properties Double-click Internet Protocol (TCP/IP) 74 ...
-
TP-Link td-w8951nd - page 83
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Click O K Select Obtain DNS server address automaticall y Click O K Select Obtain an IP address automaticall y 75 ...
-
TP-Link td-w8951nd - page 84
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide For Windows Vista OS Go to Start > Settings > Control Panel , and then you will see the followin g pa g e. Click View network status and tasks Click V iew status Click Properties 76 ...
-
TP-Link td-w8951nd - page 85
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Double-click Internet Protocol Version 4 ( TCP/IPv4 ) Select Obtain an IP address automaticall y Select Obtain DNS server address automaticall y Click O K 77 ...
-
TP-Link td-w8951nd - page 86
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide For Windows 7 OS Go to Start > Settings > Control Panel , and then you will see the followin g pa g e. Click Change adapter settings Click Properties Right-click Local Area Connection Click View network status and tasks 78 ...
-
TP-Link td-w8951nd - page 87
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Double-click Internet Protocol Version 4 ( TCP/IPv4 ) Select Obtain an IP address automatically Select Obtain DNS server address automaticall y Click O K 79 ...
-
TP-Link td-w8951nd - page 88
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide 2) Configure your IE browser Open your IE browser, click Tools tab and you will see the followin g screen. Click O K Click Internet Options Select Never dial a connection Now, try to log on to the Web- based configuration page again afte r the above settings have been configured. If you s ...
-
TP-Link td-w8951nd - page 89
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide password are correct. If there are any mistakes, please correct the settings and try again . 4) If you still cannot access the Internet, please restore your modem router to its factory default settings and reconfigure your modem router by following the instructions of in 3.2 Login . 5) Pl ...
-
TP-Link td-w8951nd - page 90
TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide Appendix C: Technical Support Technical Support For more troubleshooting help, go to: http://www.tp-link.com/e n/support/faq T o download the latest Firmware, Driver , Utility and User Gui de, go to: http://www.tp-link.com/e n/support/do wnload For all other technical support, ...
Do you have a question concerning TP-Link td-w8951nd?
Use the form below
If you did not solve your problem by using a manual TP-Link td-w8951nd, ask a question using the form below. If a user had a similar problem with TP-Link td-w8951nd it is likely that he will want to share the way to solve it.