English dropdown-ico

Manual Daewoo DT- 4280NH

72 pages 3.66 mb
Download

Go to site of 72

Summary
  • Daewoo DT- 4280NH - page 1

    PLASMA DISPLA Y USER’S MANUAL DT -4280NH Proper use guarantees product life. Before using the product, be advised that you read this owner’s manual well and try to operate it. Helpline Number : 0870 100 2525 ...

  • Daewoo DT- 4280NH - page 2

    This Owner ’ s Manual presents safety precautions and how to use the product. After reading it thoroughly , use the product safely . Keep this manual where the user can see it easily . Failure to comply with warnings and cautions for the safe use of electric appliances may cause fire or human injury . • 42” VGA wide Plasma Panel • Built in ...

  • Daewoo DT- 4280NH - page 3

    Always obey all safety messages. • All the safety and operating instructions should be read before the product is operated. If anything strange happens, unplug this product from the wall outlet. • Do not disassemble or replace any parts of the TV . Refer to a qualified service personnel for repair . Safety Precautions 4 W ARNING Y ou can be Ki ...

  • Daewoo DT- 4280NH - page 4

    5 During Use Do not open the cover (or back) because high voltage is present within the TV enclosure. It may cause electric shock. Never push any kind of objects into this product through openings at the back of TV. It may cause fire or electric shock. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liq ...

  • Daewoo DT- 4280NH - page 5

    Always obey all safety messages. • All the safety and operating instructions should be read before the product is operated. Safety Precautions 6 Power Installation CAUTION Y ou can be injured, or this product or any other of your property can be damaged if you don’t follow instructions. When moving your TV, remove the power plug, antenna, and c ...

  • Daewoo DT- 4280NH - page 6

    7 7 During Use Do not wipe the TV using a cloth damped with chemicals (benzene, thinners, etc.). The TV appearance may be marred. (Unplug the power plug and wipe with soft cloth.) Do not place any object or cover on the TV. In an event of improper ventilation, the TV will be overheated causing fire. Do not place heavy objects or heat sources on th ...

  • Daewoo DT- 4280NH - page 7

    8 Remote Control 1 UNIT Component Cable 1 UNIT Coaxial Cable 1 UNIT A/V Cable 2 UNITS Note Check to be sure that the following items are packed with your Plasma panel. Checking Accessories Supplied Accessories AC Cable 1 UNIT Ferrite Core 3UNITS VCR/DVD SAT TV CATV RECALL STILL MULTIMEDIA PR PR V O L V O L Z O O M + Z O O M - MENU P R E V P R S C R ...

  • Daewoo DT- 4280NH - page 8

    9 Note The following items are optional accessories. Refer purchasing optional accessories from Daewoo Electronics Local retailer or the retailer from where you purchased the unit. Optional Accessories T able T op Stand Speakers DT -P20J - Speaker Main Unit Dimension : 100(W) x 628(H) x 83(D) mm 39.37(W) x 24.72(H) x 3.27(D) inch - Dimension Includ ...

  • Daewoo DT- 4280NH - page 9

    ...

  • Daewoo DT- 4280NH - page 10

    11 4 • Safety Precautions 8 • Checking Accessories 12 • Panel Controls 13 • Remote control 14 • Remote control setup PREP ARA TION CONNECTION 15 • Antenna Connection 18 • T o W atch TV 20 • Install Program 26 • W atching Digital Broadcasts 28 • W atching Cable Broadcasts 30 • W atching Satellite Broadcasts 32 • W atching a D ...

  • Daewoo DT- 4280NH - page 11

    Panel Controls 12 Front Panel, Back Panel, Remote Control * Items having same names on Plasma display and the remote control would function in exactly the same way . Front ON/OFF Select when adjusting volume or select/adjust “ MENU. ” Press when moving “ MENU ” or “ Program ” STAND BY/OPERATE DVI-D INPUT ANT AV1 AV 2 AV3 L R AUDIO S-VID ...

  • Daewoo DT- 4280NH - page 12

    VCR/DVD SA T TV CA TV RECALL STILL MUL TIMEDIA PR PR V O L V O L Z O O M + Z O O M - MENU P R E V P R S C R E E N S I Z E SLEEP F .F/SLOW PLAY F .R/SLOW STOP NEXT OPEN/ CLOSE PREV PAU S E PICT . MODE SOUND MODE I-II X ? 13 Remote Control When Using Remote Control: • Be sure not to allow the Remote Control to drop or to become wet. • Keep it awa ...

  • Daewoo DT- 4280NH - page 13

    Remote Control Setup 14 - The remote control provided is designed to operate the Daewoo PDP set. - However, using the remote control, you can control the Cable Converter, VCR , DVD and Satellite Broadcasting Receiver of other brands after setting up the remote control. HOW TO SET UP THE REMOTE CONTROL FOR US ING OTHER DEVICES . • Turn on the Devi ...

  • Daewoo DT- 4280NH - page 14

    15 Antenna Connection 1. Connect the back of the TV set. WHEN THE IMAGE IS NOT CLEAR Unclear screen image and bad reception may be caused by wrong antenna connection. Be sure to check its direction or installing place. Antenna Input Indoor Antenna Connection ...

  • Daewoo DT- 4280NH - page 15

    CTV Antenna Connection 16 TV Antenna installation may be found in most. When a coaxial cable is used Plug the coaxial cable to the antenna socket, and fi x it fi rmly. It is recommended to use the provided coaxial cable. When a feeder cable is used ANT/CABLE 1 ANT/CABLE 1 Provided coaxial cable ...

  • Daewoo DT- 4280NH - page 16

    17 Outdoor Antenna connection-such as VHF or/and UHF-may be necessary for installation at private houses Single Antenna Connection. Separate Antenna Connection. VHF Antenna UHF Antenna ANT/CABLE 1 ANT/CABLE 1 Outdoor Antenna Connection ...

  • Daewoo DT- 4280NH - page 17

    T o W atch TV 18 - The buttons on the keypad in the PDP unit, which have the same name as those on the remote controller, perform the same function as the remote controller. VCR/DVD SA T TV CA TV RECALL STILL MUL TIMEDIA PR PR V O L V O L Z O O M + Z O O M - MENU P R E V P R S C R E E N S I Z E SLEEP F .F/SLOW PLA Y F .R/SLOW STOP NEXT OPEN/ CLOSE ...

  • Daewoo DT- 4280NH - page 18

    19 Press the “ ON/OFF ” button. • Press the “ ON/OFF ” button of the PDP unit. • The LED of the PDP unit turns on red colour. • Press the “ PR ” , power button of the remote control, or any button on the keypad of the PDP unit. • The LED of the PDP unit turns on “ green ” colour and the TV • To watch analog TV broadcasts, ...

  • Daewoo DT- 4280NH - page 19

    Install Program 20 VCR/DVD SA T TV CA TV RECALL STILL MUL TIMEDIA PR PR V O L V O L Z O O M + Z O O M - MENU P R E V P R S C R E E N S I Z E SLEEP F .F /S L O W P L A Y F .R /S L O W S T O P N E X T O P E N / C L O S E P R E V PICT . MODE SOUND MODE I-II X ? - This is the function for the TV to memorise the broadcasting channels. If the Auto Setup ...

  • Daewoo DT- 4280NH - page 20

    21 Select the “Auto Setup”. PR PR V O L V O L Z O O M + Z O O M MENU P R E V P R S C R E E N S I Z E • Select the “Auto Setup” with the “ PR ” button. • Then press the “ VOL ” button. Select the “Country”. PR PR V O L V O L Z O O M + Z O O M MENU P R E V P R S C R E E N S I Z E • There are 18 countries for selection. Choos ...

  • Daewoo DT- 4280NH - page 21

    VCR/DVD SA T TV CA TV RECALL STILL MUL TIMEDIA PR PR V O L V O L Z O O M + Z O O M - MENU P R E V P R S C R E E N S I Z E SLEEP F .F/SLOW PLA Y F .R/SLOW STOP NEXT OPEN/ CLOSE PREV P AUSE PICT . MODE SOUND MODE I-II X ? Edit Deleting the program. PR PR V O L V O L Z O O M + Z O O M MENU P R E V P R S C R E E N S I Z E • Place the selection bar in ...

  • Daewoo DT- 4280NH - page 22

    23 VCR/DVD SA T TV CA TV RECALL STILL MUL TIMEDIA PR PR V O L V O L Z O O M + Z O O M - MENU P R E V P R S C R E E N S I Z E SLEEP F .F/SLOW PLA Y F .R/SLOW STOP NEXT OPEN/ CLOSE PREV P AUSE PICT . MODE SOUND MODE I-II X ? Press the Number buttons(0~9) or the “ VOL ” button to select a program number you want. PR PR V O L V O L Z O O M + Z O O ...

  • Daewoo DT- 4280NH - page 23

    24 Manual Setup VCR/DVD SA T TV CA TV RECALL STILL MUL TIMEDIA PR PR V O L V O L Z O O M + Z O O M - MENU P R E V P R S C R E E N S I Z E SLEEP F .F/SLOW PLA Y F .R/SLOW STOP NEXT OPEN/ CLOSE PREV P AUSE PICT . MODE SOUND MODE I-II X ? Check the System and Fine T une. PR PR V O L V O L Z O O M + Z O O M MENU P R E V P R S C R E E N S I Z E • You ...

  • Daewoo DT- 4280NH - page 24

    25 Move the selection bar to Fine T une and press the “ VOL ” buttons to activate Fine T une up or down. Move Adjust MENU Exit Picture Screen Sound Features Install Manual Setup Program Channel Name System Fine Tune Search Memory 01 _ _ _ _ _ GB 48 C06 1 Note that it operates while the “ VOL ” button is being pressed. PR PR V O L V O L Z O ...

  • Daewoo DT- 4280NH - page 25

    W atching Digital Broadcasts • T o watch digital broadcasts: - Purchase a separate digital Broadcasting Receiver(SET -TOP BOX) - Connect the PDP to a Digital Broadcasting Receiver as shown right. 26 W atching Digital Broadcasts VCR/DVD SA T TV CA TV RECALL STILL MUL TIMEDIA PR PR V O L V O L Z O O M + Z O O M - MENU P R E V P R S C R E E N S I Z ...

  • Daewoo DT- 4280NH - page 26

    27 Input Select MUL TIMEDIA • Select [Component 1 or Component 2] by pressing the “ Multimedia ” button of the Remote Control or using the “ INPUT SELECT ” button of the PDP unit. • Each time you press the “ Multimedia ” button, different input modes appear . The sequence is as follows: Select a Desired Channel and Function • Sele ...

  • Daewoo DT- 4280NH - page 27

    W atching Cable Broadcasts • T o watch cable broadcasts, subscribe to your local Cable TV Broadcasting, and then connect a cable Broadcasting Receiver TV to the PDP as shown right. W atching Cable Broadcasts 28 VCR/DVD SA T TV CA TV RECALL STILL MUL TIMEDIA PR PR V O L V O L Z O O M + Z O O M - MENU P R E V P R S C R E E N S I Z E SLEEP F .F/SLOW ...

  • Daewoo DT- 4280NH - page 28

    29 Input Select • Select [AV 1(Scart), AV 2(Scart) or AV3(S-Video)] by pressing the [ ] button of the Remote Control or the "INPUT SELECT" Key in KeyPad of the PDP unit. • Each time you press the [ ] button, different input modes appear. The sequence is as follows: Select a Desired Program and Function • Select a desired Program and ...

  • Daewoo DT- 4280NH - page 29

    W atching Satellite Broadcasts • T o watch satellite broadcasting, subscribe to Digital Satellite Broadcasting, then connect satellite Broadcasting Receiver to the PDP as shown right. W atching Satellite Broadcasts 30 VCR/DVD SA T TV CA TV RECALL STILL MUL TIMEDIA PR PR V O L V O L Z O O M + Z O O M - MENU P R E V P R S C R E E N S I Z E SLEEP F ...

  • Daewoo DT- 4280NH - page 30

    31 Input Select Select a Desired Program and Function • Select a desired program and function by using the Remote Control of the Satellite Broadcasting Receiver . 3 4 AV 1 AV 2 TV A V(S)3 • Select [AV 1(Scart), AV 2(Scart) or AV3(S-Video)] by pressing the [ ] button of the Remote Control or the "INPUT SELECT" Key in KeyPad of the PDP ...

  • Daewoo DT- 4280NH - page 31

    W atching a DVD Image • Component Input is set to 480i and 480p mode. • Connect the cable from the DVD Video Output (Y , Pb/Cb, Pr/Cr) to the Component Input at the back of PDP , and connect the cable from DVD Audio output (Left, Right) to the Audio Input at the back of PDP . W atching a DVD Image 32 VCR/DVD SA T TV CA TV RECALL STILL MUL TIMED ...

  • Daewoo DT- 4280NH - page 32

    33 Input Select MUL TIMEDIA • Select [Component 1 or Component 2, A V1(Scart), A V2(Scart) or A V3(S-Video)] by pressing the “ MUL TIMEDIA ” or “ ” button of the Remote Control or the "INPUT SELECT" Key in KeyPad of the PDP unit. • Each time you press the “ MUL TIMEDIA ” or “ ” button, a dif ferent input mode appears. ...

  • Daewoo DT- 4280NH - page 33

    W atching a VCR Image • V ideo can use either the video terminal or the S-video terminal. W atching a VCR Image 34 VCR/DVD SA T TV CA TV RECALL STILL MUL TIMEDIA PR PR V O L V O L Z O O M + Z O O M - MENU P R E V P R S C R E E N S I Z E SLEEP F .F/SLOW PLA Y F .R/SLOW STOP NEXT OPEN/ CLOSE PREV P AUSE PICT . MODE SOUND MODE I-II X ? Press the Pow ...

  • Daewoo DT- 4280NH - page 34

    35 Input Select Select a Desired Title and Function • Select a desired title and function by using the Remote Control of the VCR. 3 4 NOTES: 1) When connecting a Video, the S-V ideo terminal provides a better image than the Video terminal. 2) When connecting to the Video terminal, connect 3 colour A V cables (video, left audio, right audio) to th ...

  • Daewoo DT- 4280NH - page 35

    W atching a Camcorder/Game Console Image • Enjoy images recorded by camcorder or the game console after connecting to the PDP . W atching a Camcorder/Game Console Image 36 VCR/DVD SA T TV CA TV RECALL STILL MUL TIMEDIA PR PR V O L V O L Z O O M + Z O O M - MENU P R E V P R S C R E E N S I Z E SLEEP F .F/SLOW PLA Y F .R/SLOW STOP NEXT OPEN/ CLOSE ...

  • Daewoo DT- 4280NH - page 36

    37 Input Select Select Function • Select the Function by using the Remote Control of Camcorder or Game Console. 3 4 NOTES: 1) When connecting a Video, the S-V ideo terminal provides a better image than the Video terminal. 2) When connecting to the Video terminal, connect 3 colour A V cables (video, left audio, right audio) to the PDP; for the S- ...

  • Daewoo DT- 4280NH - page 37

    Connecting PC • This product supports resolution of VGA, SVGA, XGA, SXGA. • Before connecting a PC to the PDP , be sure to adjust the resolution of PC. Connecting PC(15pin D-sub) 38 VCR/DVD SA T TV CA TV RECALL STILL MUL TIMEDIA PR PR V O L V O L Z O O M + Z O O M - MENU P R E V P R S C R E E N S I Z E SLEEP F .F/SLOW PLA Y F .R/SLOW STOP NEXT ...

  • Daewoo DT- 4280NH - page 38

    39 Input Select MUL TIMEDIA • Select [PC] by pressing the “ MUL TIMEDIA ” button of the Remote Control or PDP unit. • Each time you press the “ MUL TIMEDIA ” button, a different input mode appears. The sequence is as follows: Enjoy Dynamic Ultra Screen Monitor by Using PC’ s Keyboard or Mouse. 4 5 Press the Power Buttons. • T urn on ...

  • Daewoo DT- 4280NH - page 39

    Connecting PC • This product supports resolution of VGA, SVGA, XGA, SXGA. • Before connecting a PC to the PDP , be sure to adjust the resolution of PC. • This product is supported by Plug and Play only at DVI. Connecting PC(DVI) 40 VCR/DVD SA T TV CA TV RECALL STILL MUL TIMEDIA PR PR V O L V O L Z O O M + Z O O M - MENU P R E V P R S C R E E ...

  • Daewoo DT- 4280NH - page 40

    41 Input Select MUL TIMEDIA • Select [DVI] by pressing the “ MUL TIMEDIA ” button of the Remote Control or the Input button on the PDP unit. • Each time you press the “ MUL TIMEDIA ” button, a different input mode appears. The sequence is as follows: Enjoy Dynamic Ultra Screen Monitor by Using PC’ s Keyboard or Mouse. 4 5 Press the Po ...

  • Daewoo DT- 4280NH - page 41

    42 PC and DVI Input Resolution A vailable in PDP • Depending on graphic card, problems like no signal detected or line noises can happen. If these problems happen, contact the graphic card company for help. Resolution H Freq. (KHz) V Freq. (Hz) Remark DVI PC 37.861 31.469 37.861 37.500 43.269 31.469 37.927 35.156 37.879 48.077 46.875 53.674 48.36 ...

  • Daewoo DT- 4280NH - page 42

    Selecting Picture Mode • Select the Picture mode that is appropriately set depending on the kinds of pictures, and enjoy them. Selecting Picture Mode PICT MODE • Press the [PICTURE MODE] on the Remote Control. • While pressing the [PICTURE MODE] for the fi rst time, the current PICTURE MODE will be displayed. Each Press of the Button Will Se ...

  • Daewoo DT- 4280NH - page 43

    Customising Picture • Y ou can adjust the colour tone and brightness to your preference. Customising Picture 44 VCR/DVD SA T TV CA TV RECALL STILL MUL TIMEDIA PR PR V O L V O L Z O O M + Z O O M - MENU P R E V P R S C R E E N S I Z E SLEEP F .F/SLOW PLA Y F .R/SLOW STOP NEXT OPEN/ CLOSE PREV P AUSE PICT . MODE SOUND MODE I-II X ? Press the P R Bu ...

  • Daewoo DT- 4280NH - page 44

    Select User Mode Adjustments Picture Condition Adjustments • Press the “ VOL ” buttons to adjust the picture of your preference. 4 5 Move Adjust MENU Exit Picture Screen Sound Features Install Mode Brightness Contrast Colour Sharpness Colour T emp. User Normal 32 60 40 48 Move Adjust MENU Exit Picture Screen Sound Features Install Mode Bright ...

  • Daewoo DT- 4280NH - page 45

    Adjusting with Screen Size button • Y ou can adjust screen size or aspect ratio as desired. Adjusting Screen Size (Component, A V , TV) 46 VCR/DVD SA T TV CA TV RECALL STILL MUL TIMEDIA PR PR V O L V O L Z O O M + Z O O M - MENU P R E V P R S C R E E N S I Z E SLEEP F .F/SLOW PLA Y F .R/SLOW STOP NEXT OPEN/ CLOSE PREV P AUSE PICT . MODE SOUND MOD ...

  • Daewoo DT- 4280NH - page 46

    47 Press the MENU Button. • Press the [MENU] button on the Remote Control. Select “Screen”. • Press the “ PR ” buttons to select “ Screen. ” Select the Screen Size. • Press the V olume “ VOL ” buttons to select “ Screen Size ” . 3 1 2 Adjusting from MENU Screen Move Select MENU Exit Mode Brightness Contrast Colour Sharpnes ...

  • Daewoo DT- 4280NH - page 47

    Adjusting Screen Position and Size • Y ou can adjust the screen position and size as desired. VCR/DVD SA T TV CA TV RECALL STILL MUL TIMEDIA PR PR V O L V O L Z O O M + Z O O M - MENU P R E V P R S C R E E N S I Z E SLEEP F .F/SLOW PLA Y F .R/SLOW STOP NEXT OPEN/ CLOSE PREV P AUSE PICT . MODE SOUND MODE I-II X ? Press the MENU Button. • The MEN ...

  • Daewoo DT- 4280NH - page 48

    49 Press the V olume “ V O L ” Buttons. • Press the V olume “ VOL ” buttons to enter the sub menu “ Screen ” . • While you are in ‘ Screen ’ mode, press the “ PR ” or “ PR ” button to select a desired item, and then, adjust the value by pressing the “ VOL ” or “ VOL ” . 3 Move Adjust MENU Exit Picture Screen Soun ...

  • Daewoo DT- 4280NH - page 49

    VCR/DVD SA T TV CA TV RECALL STILL MUL TIMEDIA PR PR V O L V O L Z O O M + Z O O M - MENU P R E V P R S C R E E N S I Z E SLEEP F .F/SLOW PLA Y F .R/SLOW STOP NEXT OPEN/ CLOSE PREV P AUSE PICT . MODE SOUND MODE I-II X ? Press the “ZOOM+” Button. • Press the “ ZOOM+ ” button to show currently selected screen size. • Each time you press t ...

  • Daewoo DT- 4280NH - page 50

    Move the Screen Position. • While you are in the ‘ Zoom ’ mode, press the “ PR ” , “ VOL ” buttons to move screen stepwise up/down and left/right, respectively . 2 51 NOTES: 1) When the screen is enlarged, the pixel of the screen can become thick and dim. 2) When only subtitle of zoom level remains, you can scroll the image. If subtit ...

  • Daewoo DT- 4280NH - page 51

    VCR/DVD SA T TV CA TV RECALL STILL MUL TIMEDIA PR PR V O L V O L Z O O M + Z O O M - MENU P R E V P R S C R E E N S I Z E SLEEP F .F/SLOW PLA Y F .R/SLOW STOP NEXT OPEN/ CLOSE PREV P AUSE PICT . MODE SOUND MODE I-II X ? Press the “STILL” Button. • If you wish to freeze a picture, press the “ STILL ” button. Y ou can still hear the sound. ...

  • Daewoo DT- 4280NH - page 52

    Adjusting Auto Sound Mode • Enjoy various sound modes by selecting your favorite Sound Mode depending on the kinds of moving pictures. Adjusting Auto Sound Mode 53 VCR/DVD SA T TV CA TV RECALL STILL MUL TIMEDIA PR PR V O L V O L Z O O M + Z O O M - MENU P R E V P R S C R E E N S I Z E SLEEP F .F/SLOW PLA Y F .R/SLOW STOP NEXT OPEN/ CLOSE PREV P A ...

  • Daewoo DT- 4280NH - page 53

    Customising Sound Mode • This feature allows the user to adjust for his preference. Customising Sound Mode 54 Press the “ P R ” Button. • Select [Sound] by the “ PR ” buttons, then press the “ VOL ” button to display the following. Select SOUND BALANCE. • Select Sound [Balance] by the “ VOL ” buttons, then adjust it. 3 Press t ...

  • Daewoo DT- 4280NH - page 54

    Select the Effect Mode. • Select [Effect] by pressing the “ PR ” buttons, then select ON/OFF by pressing the “ VOL ” button. • [Effect]: Used to emphasize stereo ef fect. Select the Sound Mode. 4 5 Move Adjust MENU Exit Picture Screen Sound Features Install Balance Effect AV C Mode 120Hz 500Hz 1.5kHz 5kHz 10kHz Off Off Normal 0 0 0 0 0 ...

  • Daewoo DT- 4280NH - page 55

    Selecting INPUT SIGNAL 56 Press the “MUL TIMEDIA” or “ ” Button. MUL TIMEDIA • Press the “ MUL TIMEDIA ” or “” button on the Remote Control or the PDP Display to select desired input signal. • Each time you press the “ MUL TIMEDIA ” or “” button, a different screen mode appears. The sequence used is as follows: 1 V C R / ...

  • Daewoo DT- 4280NH - page 56

    57 NOTES: 1) If an external device is not connected or INPUT signal is not applied, W arning Message ( “ No Signal ” ) would be displayed. 2) In this case, check if external device is connected and/or terminal connection is properly done. 3) Also, you can select input using [INPUT SELECT] button in the keypad of the PDP unit. The sequence of se ...

  • Daewoo DT- 4280NH - page 57

    Checking the Current Input Signal • Used to check the INPUT signal mode, resolution, frequency(video only), etc. of the current screen. Checking the Current Input Signal 58 Press the RECALL Button. RECALL • Press the [RECALL] button on the Remote Control. 1 VCR/DVD SA T TV CA TV RECALL STILL MUL TIMEDIA PR PR V O L V O L Z O O M + Z O O M - MEN ...

  • Daewoo DT- 4280NH - page 58

    Selecting Languages • Used to select transparent of MENU background and language used in MENU. Press the MENU Button. PR PR V O L V O L Z O O M + Z O O M MENU P R E V P R S C R E E N S I Z E • The MENU screen will be displayed as below . Press the “ P R ” Button. • Select [Features] by the “ PR ” button. Select the menu Background. ? ...

  • Daewoo DT- 4280NH - page 59

    VCR/DVD SA T TV CA TV RECALL STILL MUL TIMEDIA PR PR V O L V O L Z O O M + Z O O M - MENU P R E V P R S C R E E N S I Z E SLEEP F .F/SLOW PLA Y F .R/SLOW STOP NEXT OPEN/ CLOSE PREV P AUSE PICT . MODE SOUND MODE I-II X ? MENU Background, Language and Child Lock Setting Select LANGUAGE by using the “P R ” Button. • Select LANGUAGE by using the ...

  • Daewoo DT- 4280NH - page 60

    61 MGDI Demo • When [MGDI] is set to Demo mode, Half of screen is [MGDI] ON and the other half is [MGDI] OFF . • As [MGDI] is of f, the sharpness of the Picture mode cannot be controlled. Press the MENU Button. PR PR V O L V O L Z O O M + Z O O M MENU P R E V P R S C R E E N S I Z E • The MENU screen will be displayed as below . Select Featur ...

  • Daewoo DT- 4280NH - page 61

    POWER/ST ANDBY Indicator Front panel LED lights • When the AC power is on : Green. • When the AC power is in the standby mode : Red. 62 Auto Power Setting Auto Power Setting • Select the [Auto Power] by pressing the “ PR ” button from [Features]. • You can select [Auto Power] ON and OFF mode by using the “ VOL ” button. 1 Move Adjus ...

  • Daewoo DT- 4280NH - page 62

    63 Press the MENU Button. PR PR V O L V O L Z O O M + Z O O M MENU P R E V P R S C R E E N S I Z E • The MENU screen will be displayed as below . Select Features PR PR V O L V O L Z O O M + Z O O M MENU P R E V P R S C R E E N S I Z E • Select [Features] by the “ PR ” button. Select Time Setting PR PR V O L V O L Z O O M + Z O O M MENU P R ...

  • Daewoo DT- 4280NH - page 63

    Time Setting • The “ Current time ” must be set up ahead of setting up other time memories. 64 T ime Setting Off-Time and W ake time setting • Select Functions by pressing the “ PR ” button. First, set [Clock]- current time, and then Y ou can setup off-time and wake time. 4 Move Select MENU Exit Picture Screen Sound Features Install T i ...

  • Daewoo DT- 4280NH - page 64

    ISM • Image burn minimisation. • Displaying a still image like PC input for a long time causes part image sticking in the panel • The ISM function minimise this effect. Image Sticking Minimisation(ISM) 65 Press the MENU Button. PR PR V O L V O L Z O O M + Z O O M MENU P R E V P R S C R E E N S I Z E • The MENU screen will be displayed as be ...

  • Daewoo DT- 4280NH - page 65

    66 Image Sticking Minimisation(ISM) Select Functions. • Every press of the “ VOL ” button after select function by the “ PR ” button would switch between ON/OFF . 4 Move Adjust MENU Exit Picture Screen Sound Features Install ISM Pixel Shift Low Bright Off Off PR PR V O L V O L Z O O M + Z O O M MENU P R E V P R S C R E E N S I Z E NOTES: ...

  • Daewoo DT- 4280NH - page 66

    67 Back to Initialisation • Y ou can restore the values of the adjustment setting made in the MENU to factory settings. Initialise Setting Press the MENU Button. PR PR V O L V O L Z O O M + Z O O M MENU P R E V P R S C R E E N S I Z E • The MENU screen will be displayed as below . Select Features • Select [Features] by the “ PR ” button. ...

  • Daewoo DT- 4280NH - page 67

    68 When [INITIALISA TION] is completed: 1) When [INITIALISATION] is completed, those values that have been set in the User Mode of [SCREEN MODE] and [SOUND MODE] will be returned to the factory preset values. 2) Once initialised, you can not undo. 3) The items in the [SCREEN] Menu in PC or DVI INPUT are also initialised (i.e., H. Size, V. Size, H. ...

  • Daewoo DT- 4280NH - page 68

    69 Setting Sleep Timer • SLEEP TIMER turns the PDP off after a preset time. Press the “SLEEP” Button. SLEEP • Press the “ SLEEP ” button on the Remote Control. • Pressing the “ SLEEP ” button fi rst time will display the current setting for SLEEP TIMER. • T o cancel the SLEEP TIMER, press the “ SLEEP ” button to select ‘ ...

  • Daewoo DT- 4280NH - page 69

    T eletext 70 Switching T eletext ON/OFF • Press the T ext button ( ) The index page or the page viewed last will appear . Press the T ext button again to return to the TV mode. Selecting Pages • The Page selector button 0~9 are used to enter a page number . The selected page number appears at the top of the screen and the page appears after a s ...

  • Daewoo DT- 4280NH - page 70

    71 Calling Up Subpage Directly • Pressing the Subpage( ) button. The subpage number is displayed at the bottom of the screen. T o change the subpage press the Red(-) / Green(+) buttons. Enter the subpage number that you want to call up with the Page selector button 0~9, for example, the 2nd page, sequence 0002. The desired subpage will eventually ...

  • Daewoo DT- 4280NH - page 71

    Before Requesting Service 72 Before Requesting for Service St yo mm ps C h e c k s A c t i o n • There are empty spots at the top and the bottom area of the screen. • Check if the screen size of an image is wider than 16:9 aspect ratio (theatre screen size). • When video screen is wider than 16:9 aspect ratio, you may see dark areas at the to ...

  • Daewoo DT- 4280NH - page 72

    73 SPECIFICA TIONS * Appearance and speci fi cations of this product are subject to change for improving the product without prior notice. DISPLA Y UNIT CONNECTION TERMINAL ITEMS VIDEO AUDIO DVI INPUT DVI-D Digital Only Jack (LEFT/RIGHT) PC INPUT one 15 pin D-sub jack (LEFT/RIGHT) Component INPUT two Y, Pb/Cb, Pr/Cr RCA Jack 2sets (LEFT/RIGHT) AV ...

Manufacturer Daewoo Category Flat Panel Television

Documents that we receive from a manufacturer of a Daewoo DT- 4280NH can be divided into several groups. They are, among others:
- Daewoo technical drawings
- DT- 4280NH manuals
- Daewoo product data sheets
- information booklets
- or energy labels Daewoo DT- 4280NH
All of them are important, but the most important information from the point of view of use of the device are in the user manual Daewoo DT- 4280NH.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Daewoo DT- 4280NH, service manual, brief instructions and user manuals Daewoo DT- 4280NH. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Daewoo DT- 4280NH.

Similar manuals

A complete manual for the device Daewoo DT- 4280NH, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Daewoo DT- 4280NH by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Daewoo DT- 4280NH.

A complete Daewoo manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Daewoo DT- 4280NH - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Daewoo DT- 4280NH, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Daewoo DT- 4280NH, that we can find in the current document
3. Tips how to use the basic functions of the device Daewoo DT- 4280NH - which should help us in our first steps of using Daewoo DT- 4280NH
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Daewoo DT- 4280NH
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Daewoo DT- 4280NH in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Daewoo DT- 4280NH?

Use the form below

If you did not solve your problem by using a manual Daewoo DT- 4280NH, ask a question using the form below. If a user had a similar problem with Daewoo DT- 4280NH it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)