English dropdown-ico

Manual Holman N10372

15 pages 1.41 mb
Download

Go to site of 15

Summary
  • Holman N10372 - page 1

    INSTRUCTION MANUAL SUIT ABLE FOR INDOOR USE ONL Y OTHERWISE WARRANTY IS VOID IRRIGA TION CONTROLLER 6 S tation Model ...

  • Holman N10372 - page 2

    PAGE 1 This unit is available as a 6 station configuration. Designed for residential and light commercial applications, this controller has four separate programs with up to sixteen possible start times a day . This ensures efficient watering of different garden or turf areas. These different areas may require individual watering programs and often ...

  • Holman N10372 - page 3

    PAGE 3 Programming Instructions Introduction This controller has been designed with four separate programs, to allow different garden areas to have their own individual watering requirements. A program is basically a method of grouping stations (valves) with similar watering requirements to water on the same days. These stations will water in seque ...

  • Holman N10372 - page 4

    PAGE 5 Programming Instructions Programming Instructions Programming Example In this example, the lawn areas , Program 1 ( Group 1 ), are using pop-up sprinklers & require less frequent watering. The vegetables are being watered using drippers on a longer run time, with the flower beds, pots, hanging baskets and pergola areas being watered usin ...

  • Holman N10372 - page 5

    PAGE 7 Before proceeding, ensure your watering planner has been completed. From this, you should be aware of which stations are allocated to each program. Note: Set one program at a time - This will ensure that all the values are entered correctly . SETTING PROGRAM 1 - The program number can only be set/changed in the Set Start Times position. Step ...

  • Holman N10372 - page 6

    PAGE 9 Programming Odd / Even Day Selection (Optional) In some regions, users are only allowed to water their gardens on, ODD dates if their house number is ODD, or on EVEN dates when their number is EVEN . This controller allows this to be done simply by setting the relevant selection of ODD or EVEN and setting the current date into the controller ...

  • Holman N10372 - page 7

    PAGE 1 1 Manual Operations Programming Step 3. Set Station Run Times. (Continued) T o adjust the Run time in minutes press next , and use or . T o set the run time in hours, press next and “0” will appear and flash. T o adjust use or . If not required, press next and advance to station 2 by pressing the button. Continue until all the stations i ...

  • Holman N10372 - page 8

    PAGE 13 Rain Sensor Ready This feature should only be used when a rain sensor has been connected. The controller comes pre-fitted with a socket, ready to take the “HOLMAN” Rain Sensor (P/N CRS1000BC, not included) which has also been pre- fitted with a plug. Simply push the plug into the socket and mount the rain switch, exposing it to direct w ...

  • Holman N10372 - page 9

    Rain Sensor Ready (cont.) DELA Y FEA TURE - When using the Rain Sensor Ready feature, in conjunction with the rain sensor . It is possible to set a delay in the controller to stop the automatic programs from activating too quickly . This feature is applicable to the stations nominated to be controlled by the sensor . EG: Set to rain sensor “ON” ...

  • Holman N10372 - page 10

    Inst allation Instructions Mounting The Controller This controller unit is an INDOOR MODEL and MUST not be exposed to rain or water ingress. (If the controller needs to be outdoors, you can purchase a HOLMAN outdoor weatherproof box, P/N COBOX, to mount the controller inside.This box is available from your irrigation supplier.) Install the controll ...

  • Holman N10372 - page 11

    Inst allation Instructions Power Supply Connections The controller itself can run of f a 240V AC to 24V AC external transformer .. It is recommended that the transformer is not connected to a 240V AC supply which is also servicing or supplying motors (i.e. Air conditioners, pool pumps, refrigerators, etc.) Lighting circuits are suitable as a power ...

  • Holman N10372 - page 12

    Electrical Characteristics Power Supply MAINS SUPPL Y This unit can run off a 50Hz external transformer , (plugpack), with an output of 24V AC 50Hz @ 1 Amp. Plug Pack Model The correct wiring installation for the 24V AC plug pack is shown on page 19. The plug pack model is only suitable for indoor installation. Electrical Outputs ELECTRICAL POWER S ...

  • Holman N10372 - page 13

    Possible Cause Faulty transformer. Fuse blown. Faulty solenoid coil. Incorrect wiring or bad wiring joint. Incorrect programming or blown fuse. Short on keypad or Programming not correct. Short on keypad or too many start times entered on automatic programs. Damaged main output driver chip. Faulty relay or pump contactor. Display damaged during tra ...

  • Holman N10372 - page 14

    S pare W atering Planner PAGE 25 PAGE 24 S pare W atering Planner ...

  • Holman N10372 - page 15

    Y our Guarantee The manufacturer Guarantee to the original purchaser that any product supplied by the manufacturer will be free from defects in materials and workmanship for a period of three years from the date of purchase. Any product found to have defects in material or workmanship within the period of this Guarantee shall be repaired or replace ...

Manufacturer Holman Category Irrigation System

Documents that we receive from a manufacturer of a Holman N10372 can be divided into several groups. They are, among others:
- Holman technical drawings
- N10372 manuals
- Holman product data sheets
- information booklets
- or energy labels Holman N10372
All of them are important, but the most important information from the point of view of use of the device are in the user manual Holman N10372.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Holman N10372, service manual, brief instructions and user manuals Holman N10372. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Holman N10372.

Similar manuals

A complete manual for the device Holman N10372, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Holman N10372 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Holman N10372.

A complete Holman manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Holman N10372 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Holman N10372, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Holman N10372, that we can find in the current document
3. Tips how to use the basic functions of the device Holman N10372 - which should help us in our first steps of using Holman N10372
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Holman N10372
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Holman N10372 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Holman N10372?

Use the form below

If you did not solve your problem by using a manual Holman N10372, ask a question using the form below. If a user had a similar problem with Holman N10372 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)