English dropdown-ico

Manual Multitech RF102S

26 pages 0.62 mb
Download

Go to site of 26

Summary
  • Multitech RF102S - page 1

    Model RF102S Dual Serial Port Router with Built-in 4-Port 10/100 Switch Quick St art Guide ...

  • Multitech RF102S - page 2

    Quick Start Guide PN#S0000137Revision A Model RF102S Serial Port Router This publication may not be reproduced, in whole or in part, without prior expressed written permission from Multi-T ech Systems, Inc. All rights reserved. Copyright © 2001, by Multi-Tech Systems, Inc. Multi-T ech Systems, Inc. makes no representations or warranties with respe ...

  • Multitech RF102S - page 3

    iii Content s Introduction .................................................................................... 4 Related Documentation .................................................................. 5 Get Adobe Acrobat Reader ...................................................... 5 Get the User Guide ............................................ ...

  • Multitech RF102S - page 4

    RouteFinder RF102S Quick S tart Guide 4 Introduction Congratulations on the purchase of one of the finest serial port routers available today , Multi-T ech Systems RouteFinder Model RF102S. The RouteFinder RF102S provides shared Internet access for up to 253 LAN users over a modem connection and one 1 IP address. Virtual Server (IP Mapping) enab ...

  • Multitech RF102S - page 5

    Introduction 5 Related Documentation This RF102S Serial Port Router Quick S tart Guide is intended to be used by systems administrators and network managers. This guide provides the necessary information for a qualified person to unpack, cable, install software, and configure the device for proper operation. A detailed RF102S Serial Port Router Use ...

  • Multitech RF102S - page 6

    RouteFinder RF102S Quick S tart Guide 6 Hardware Installation Safety Warnings 1. Never install telephone wiring during a lightning storm. 2. Never install telephone jacks in a wet location unless the jack is specifically designed for wet locations. 3. This product is to be used with UL and cUL listed computers. 4. Never touch uninsulated telephone ...

  • Multitech RF102S - page 7

    Hardware Installation 7 Cabling your RouteFinder Cabling your RouteFinder requires making the appropriate connections to PCs, analog modem or ISDN T A (optional), AC power and the router . Because this device also provides DHCP server functions, remote access, routing, and firewall protection, after your device is properly cabled, you will need to ...

  • Multitech RF102S - page 8

    RouteFinder RF102S Quick S tart Guide 8 4. T o use the Uplink option to connect to another network segment, slide the Uplink/Normal switch into the Uplink position. Connect the LAN cable to LAN port number 1. Plug the other end of the LAN cable into another hub, router , or switch. Note: If you are not using the Uplink feature, place the switch in ...

  • Multitech RF102S - page 9

    Software Installation 9 Software Installation and Configuration Before beginning the installation process, ensure that your system meets all hardware and software requirements:  Intel 486 or higher processor .  10/100 BaseT cable to connect the RF102S to the network.  One or two asynchronous analog modems or ISDN terminal adapters (also kn ...

  • Multitech RF102S - page 10

    RouteFinder Quick S tart Guide 10 RouteFinder Monitor RouteFinder Monitor is a multi-purpose utility designed to let you know the status of your RF102S connection. The monitor offers the ability to point and click on an event to access context-sensitive troubleshooting procedures. Using RouteFinder Setup Wizard Note: Before beginning this procedure ...

  • Multitech RF102S - page 11

    Software Installation 11 4. When the software installation completes, the Setup Wizard dialog box displays. Click OK . ...

  • Multitech RF102S - page 12

    RouteFinder Quick S tart Guide 12 5. The Setup Wizard: Device List dialog box displays. The Setup Wizard automatically checks your network for available network devices and displays them in the Device Name list. Select the device you want to configure from the Device Name list. Record the information in the Device Information area for later referen ...

  • Multitech RF102S - page 13

    Software Installation 13 6. The Setup Wizard: Device IP Address dialog box displays. Enter the last octet of the local network IP address for this device. The Setup Wizard automatically detects the first three octets of your local IP address. Y ou can change the network name of your RouteFinder . If you are connecting to an ISP , the device name ca ...

  • Multitech RF102S - page 14

    RouteFinder Quick S tart Guide 14 7. The Select Function dialog box displays. Select IP Routing (NA T Enabled) to enable local LAN clients to share one external IP address for accessing the Internet. Select Remote Access to enable remote users to use a dial-up connection to log on to the network. Click Next . ...

  • Multitech RF102S - page 15

    Software Installation 15 8. If the Remote Access option was selected for one or both ports, the Setup Wizard: Remote Access dialog box displays. Remote Access Y ou must define the location of your remote user account database by selecting Use Local Client List or Use RADIUS Server . Follow the instructions for the user database that your system wil ...

  • Multitech RF102S - page 16

    RouteFinder Quick S tart Guide 16 Password V erification: Re-enter the remote dial-in user s password. Callback T ype: Select one of the following three callback options for each remote client:  No Callback : Select this option to enalbe the remote user to immediately connect to the network after being authenticated. No Callback is the defaul ...

  • Multitech RF102S - page 17

    Software Installation 17 Use RADIUS Server Select this option to authenticate your remote clients on a RADIUS server . Enter the following RADIUS Server Settings:  RADIUS Access Server IP Address : Enter the IP address of the RADIUS Access Server .  RADIUS Accounting Server IP Address : Enter the IP address of the RADIUS Accounting Server . ? ...

  • Multitech RF102S - page 18

    RouteFinder Quick S tart Guide 18 IP Routing (NA T Enabled) and IP Routing (NA T Disabled) If you select IP Routing for an asynchronous port, the Setup Wizard: IP Routing dialog box displays. Enter the information required to dial-up and login to your ISPs remote server:  T elephone Number : Enter the phone number used to dial your remote ser ...

  • Multitech RF102S - page 19

    Software Installation 19 9. The Setup Wizard: DNS IP Address dialog box displays. Enter your ISPs DNS Server IP address. If you are not sure of the IP address, cont act your ISP . Refer to the Glossary in the User Guide for more information about the DNS Server . Click Next . 10 . The Setup Wizard: Modem Settings dialog box displays. ...

  • Multitech RF102S - page 20

    RouteFinder Quick S tart Guide 20 The final step in configuring your RF102S for basic operations is to enter the model and DTE baudrate of the modem you are using. This is an important setting that determines the DTE baudrate or speed of communication between the RF102Ss ports and your modem or ISDN T A . Select your modem and baudrate as descri ...

  • Multitech RF102S - page 21

    Software Installation 21 13 . The Setup Wizard: Modem Setting dialog box re- displays. Select the baudrate from the Asynchronous port settings list. Select the DTE speed (the speed of communication between the asynchronous port of the RF102S and the modem). For DCE speed compression modems, this can normally be set to about four times the speed of ...

  • Multitech RF102S - page 22

    RouteFinder Quick S tart Guide 22 15 . The Note dialog box displays indicating that you have completed the Setup Wizard. Read the IMPORT ANT! information cont ained in the dialog box. Click Run Monitor (recommended), or click Run Manager to configure the RF102S, or click Exit . Testing your Connection When you select Run Monitor , the RouteFi ...

  • Multitech RF102S - page 23

    Software Installation 23 Note: If a problem occurs while testing your connection, or you need to configure advanced options such as filtering, DHCP or routing, use RouteFinder Manager by selecting Start | Programs | RouteFinder Manager | RouteFinder Manager . Configuring your Route Finder RouteFinder Manager is the main program used to configure yo ...

  • Multitech RF102S - page 24

    RouteFinder Quick S tart Guide 24 Limited Warranty Multi-T ech W arranty & Repair Policies Multi-T ech Systems, Inc., (hereafter MTS) warrants that its products will be free from defects in material or workmanship for a period of two years from date of purchase, or if proof of purchase is not provided, two years from date of shipment. MTS ...

  • Multitech RF102S - page 25

    Software Installation 25 Technical Support Multi-T ech Systems has an excellent staf f of technical support personnel available to help you get the most out of your Multi-T ech product. If you have any questions about the operation of this unit, or experience difficulty during installation you can contact T ech Support via the following: Phone: (80 ...

  • Multitech RF102S - page 26

    S0000137 ...

Manufacturer Multitech Category Network Router

Documents that we receive from a manufacturer of a Multitech RF102S can be divided into several groups. They are, among others:
- Multitech technical drawings
- RF102S manuals
- Multitech product data sheets
- information booklets
- or energy labels Multitech RF102S
All of them are important, but the most important information from the point of view of use of the device are in the user manual Multitech RF102S.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Multitech RF102S, service manual, brief instructions and user manuals Multitech RF102S. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Multitech RF102S.

Similar manuals

A complete manual for the device Multitech RF102S, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Multitech RF102S by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Multitech RF102S.

A complete Multitech manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Multitech RF102S - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Multitech RF102S, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Multitech RF102S, that we can find in the current document
3. Tips how to use the basic functions of the device Multitech RF102S - which should help us in our first steps of using Multitech RF102S
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Multitech RF102S
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Multitech RF102S in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Multitech RF102S?

Use the form below

If you did not solve your problem by using a manual Multitech RF102S, ask a question using the form below. If a user had a similar problem with Multitech RF102S it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)