English dropdown-ico

Manual Sitecom WLE-1000INT

50 pages Not applicable
Download

Go to site of 50

Summary
  • Sitecom WLE-1000INT - page 1

    I nstallation guide WLE-1000INT_QIG_20131127.indd 1-2 09-01-14 16:13 ...

  • Sitecom WLE-1000INT - page 2

    P ackage conten t 1x SmartBr idge 1x Po wer adapter 1x Network cable Sitecom and NET2GRID Many energy suppliers o er a way to gain insights in to your energy use. W e believe that you don ’ t have to be tied to a supplier to gain insigh ts into your ener gy use. NET2GRID pro vides an easy solution to measure and monitor y our home’ s energy ...

  • Sitecom WLE-1000INT - page 3

    Network por t P1 SmartM eter port Pow e r SmartPlug LED SmartPlug Pairing and On/O button LED ring Smar tBridge Smar tPlug • Pairing mode: LED blinking red/green, r eady to connect to smartbridge. • Smartplug ON: LED is solid green / Smar tplug OFF: LED is o . EN WLE-1000INT_QIG_20131127.indd 5-6 09-01-14 16:13 ...

  • Sitecom WLE-1000INT - page 4

    Befor e y ou star t Writ e down the SmartBridge ID To p Bottom NET2G RID SMARTBRIDGE ID SMARTBRIDGE ID MAC ADDRESS MA C ADDRESS XXX XXX XX:XX:XX:XX:XX :XX XX:XX :XX:XX: XX:XX QR CODE QR COD E Smar tBridge Smar tBridge EN WLE-1000INT_QIG_20131127.indd 7-8 09-01-14 16:13 ...

  • Sitecom WLE-1000INT - page 5

    Install the Smar tBridge & Smar tPlugs 1 1 Plug the SmartPlugs into a power socket . • Make sure to use power sockets close t o the (modem) router for installation. • After successful installation you can mo ve the SmartPlugs anywhere in your house. Check if the SmartPlug LEDs are green. If not press the button to turn on the SmartPlug. ! E ...

  • Sitecom WLE-1000INT - page 6

    3 WA N LAN LAN LAN LAN (modem) router SmartBridge LAN Connect the SmartBridge to your (modem) router with the supplied network cable. 2 Push the button on each of the two SmartPlugs for 5 seconds un til the LED starts to blink green and red. press 5 sec. press 5 sec. EN WLE-1000INT_QIG_20131127.indd 11-12 09-01-14 16:13 ...

  • Sitecom WLE-1000INT - page 7

    4 WA N LAN LAN LAN Connect the micro USB cable to the SmartBridge and to the USB power adapter and plug the po wer adapter into a w all socket. 5 When the LED’ s turn solid blue your SmartBridge has been installed. EN WLE-1000INT_QIG_20131127.indd 13-14 09-01-14 16:14 ...

  • Sitecom WLE-1000INT - page 8

    6 Check that the LEDs of the SmartPlugs have turned solid green. • Now you can mov e the Smar tPlugs and plug in the devices you w ould like to measure. • The button can now be used to turn the plugs on and o . EN WLE-1000INT_QIG_20131127.indd 15-16 09-01-14 16:14 ...

  • Sitecom WLE-1000INT - page 9

    Registr ation with NE T 2GRID 2 1 Download the free NET2GRID Ener gy Insight app from the App Store or Google Pla y . EN WLE-1000INT_QIG_20131127.indd 17-18 09-01-14 16:14 ...

  • Sitecom WLE-1000INT - page 10

    2 3 Open the app and click on “Register ” on the star t screen. Fill in the r egistration form including the SmartBridge ID that you documented earlier . iOS iOS Android Android EN WLE-1000INT_QIG_20131127.indd 19-20 09-01-14 16:14 ...

  • Sitecom WLE-1000INT - page 11

    4 Check your e-mail account and write down the supplied username and password . • Make sure to check your spam-f older if you can’ t  nd the e -mail. EN WLE-1000INT_QIG_20131127.indd 21-22 09-01-14 16:14 ...

  • Sitecom WLE-1000INT - page 12

    a. Open the NE T2GRID Ener gy Insight app & login with the username and password that y ou received in y our e -mail. Monitor and measure the energy c onsumption 3 iOS Android EN WLE-1000INT_QIG_20131127.indd 23-24 09-01-14 16:14 ...

  • Sitecom WLE-1000INT - page 13

    At home (free) Anywhere* (3 EUR/month) X See how much electricity your connected devices use in real-time T urn connected devices on/o *T o buy the subscription, go to https://store.net2grid.c om Schedule on and o -times for connected devices See how much electricity your connected devices have used in the past Access to w eb portal from any ...

  • Sitecom WLE-1000INT - page 14

    V erpackungsinhalt 1x SmartBr idge 1x Netzstecker 1x Netzwerk abel Sitecom und NET2GRID Viele Energieversorger bieten ihren Kunden eine Möglichkeit, einen Einblick in ihren Energiev erbrauch zu erhalten. Wir sind jedoch der Ansicht, dass Sie sich für diese Informationen nicht an einen Energieanbieter binden müssen. Mit NE T2GRID können Sie Ihre ...

  • Sitecom WLE-1000INT - page 15

    Netzwerk anschluss P1 SmartM eter -Anschluss Strom SmartPlug LED SmartPlug Pairing und An/Aus T aste LED Ring Smar tBridge Smar tPlug • Pairing mode: LED blinkt r ot/grün, zum V erbindungsaufbau bereit. • SmartPlug an: LED ist konstant grün / Smar tPlug aus: LED ist aus. DE WLE-1000INT_QIG_20131127.indd 29-30 09-01-14 16:14 ...

  • Sitecom WLE-1000INT - page 16

    V or dem Star t Notieren Sie die SmartBridge -ID Oberseite Unterseite NET2G RID SMARTBRIDGE ID SMARTBRIDGE ID MAC ADDRESS MA C ADDRESS XXX XXX XX:XX:XX:XX:XX :XX XX:XX :XX:XX: XX:XX QR CODE QR COD E Smar tBridge Smar tBridge DE WLE-1000INT_QIG_20131127.indd 31-32 09-01-14 16:14 ...

  • Sitecom WLE-1000INT - page 17

    Smar tBridge und Smar tPlugs installieren 1 1 Schließen Sie die Smar tPlugs an eine Steckdose an. • Die Steckdosen sollten sich in der Nähe des (Modem) Routers benden. • Nach Abschluss der Installation können Sie die SmartPlugs frei im Haus bewegen. DE ! Kontrollieren Sie, ob die SmartPlug LEDS g rün leuchten. F alls nicht, drücken Sie ...

  • Sitecom WLE-1000INT - page 18

    3 WA N LAN LAN LAN LAN (Modem) Router SmartBridge LAN Schließen Sie die Smar tBridge über das im Lieferumfang enthalt ene Netzwerkk abel an Ihren (Modem-) Router an. 2 Halten Sie die T asten an den beiden Smar tPlugs 5 Sekunden lang gedrückt, bis die LEDs grün und rot blinken. T aste 5 Sek. drücken T aste 5 Sek. drücken DE WLE-1000INT_QIG_201 ...

  • Sitecom WLE-1000INT - page 19

    4 WA N LAN LAN LAN Schließen Sie das Micro-USB -Kabel an die SmartBridge und an das USB-Netzteil an, und stecken Sie das Netzteil in eine Steck dose. 5 W enn die LEDs blau leuchten, wurde die SmartBridge ordnungsgemäß installiert. DE WLE-1000INT_QIG_20131127.indd 37-38 09-01-14 16:14 ...

  • Sitecom WLE-1000INT - page 20

    6 V ergewissern Sie sich, dass die LEDs der SmartPlugs grün leuchten. • Nun können Sie Geräte an die SmartPlugs anschließen, deren Energieverbrauch Sie messen möchten. • Die T aste kann nun genutzt werden um die SmartPlugs an und aus zu schalten. DE WLE-1000INT_QIG_20131127.indd 39-40 09-01-14 16:14 ...

  • Sitecom WLE-1000INT - page 21

    Registrierung bei NET2 GRID 2 1 Laden Sie die kostenlose NET2GRID Ener gy Insight-App aus dem App Store oder v on Google Play herunter . DE WLE-1000INT_QIG_20131127.indd 41-42 09-01-14 16:14 ...

  • Sitecom WLE-1000INT - page 22

    2 3 Ö nen Sie die App , und k licken Sie auf der Startseite auf “Registrieren“ . F üllen Sie das Anmeldeformular aus und tragen Sie die SmartBridge -ID ein, die Sie zuvor notiert haben. iOS iOS Android Android DE WLE-1000INT_QIG_20131127.indd 43-44 09-01-14 16:14 ...

  • Sitecom WLE-1000INT - page 23

    4 Kontrollier en Sie Ihr E-Mail Postfach und notieren Sie den Benutzernamen und das Kennw ort. • Wenn Sie keine E-Mail erhalten haben, überprüfen Sie Ihren Spam-Ordner . DE WLE-1000INT_QIG_20131127.indd 45-46 09-01-14 16:14 ...

  • Sitecom WLE-1000INT - page 24

    a. Ö  nen Sie die NET2GRID Ener gy Insight-App und melden Sie sich mit Ihrem Benutzernamen und Kennwort an. Energie v erbr auch über wachen und messen 3 iOS Android DE WLE-1000INT_QIG_20131127.indd 47-48 09-01-14 16:14 ...

  • Sitecom WLE-1000INT - page 25

    Zu Hause (kostenlos) W eltweit* (3 EUR/Monat) X Erfassen des Energieverbrauchs der angeschlossenen Geräte in Echtzeit Ein- und Ausschalten der angeschlossenen Geräte * Um ein Abonnement abzuschließen besuchen Sie bitte https://store.net2grid.c om Ein- und Ausschalten der angeschlossenen Geräte mit Z eitschaltuhr Anzeigen des bisherigen Energiev ...

  • Sitecom WLE-1000INT - page 26

    C ontenuto 1x SmartBr idge 1x Adattat ore di potere 1x Cav o di rete Sitecom e NET2GRID Molti fornitori energetici o rono un modo per capire quanta ener gia si sta consumando . Ma secondo noi, per capire quanta energia stai consumando non hai bisogno di essere lega to a un fornitore . NET2GRID o re una soluzione semplice per misurar e e monit ...

  • Sitecom WLE-1000INT - page 27

    Porta di rete Porta P1 SmartM eter Pow e r SmartPlug LED Pulsant e accoppiamento SmartPlug e On/O  Anello LED Smar tBridge Smar tPlug • Modalità accoppiamento: LED lampeggiant e rosso/verde, pr onto alla connessione con lo SmartBridge. • SmartPlug ON: LED verde sso / SmartPlug OFF: LED spento. IT WLE-1000INT_QIG_20131127.indd 53-54 09-01 ...

  • Sitecom WLE-1000INT - page 28

    Prima di iniziar e Prendi nota dell’ID di SmartBridge Lato superiore Lato inferior e NET2G RID SMARTBRIDGE ID SMARTBRIDGE ID MAC ADDRESS MA C ADDRESS XXX XXX XX:XX:XX:XX:XX :XX XX:XX :XX:XX: XX:XX QR CODE QR COD E Smar tBridge Smar tBridge IT WLE-1000INT_QIG_20131127.indd 55-56 09-01-14 16:14 ...

  • Sitecom WLE-1000INT - page 29

    Installazione di Smar tBridge e degli Smar tPlug 1 1 Collega gli SmartPlug a una presa di corren te. • Ricordati di usare due prese di c orrente vicine allo (modem) router per l’ installazione. • Al termine dell’ installazione, potrai spostare gli SmartPlug in qualsiasi punto della casa. IT ! Controlli se i LED dello SmartPlug sono verdi. S ...

  • Sitecom WLE-1000INT - page 30

    3 WA N LAN LAN LAN LAN router (modem) SmartBridge LAN Collega SmartBridge al router (modem) mediante il ca vo di rete fornito in dotazione . 2 Tieni premut o per 5 secondi il tasto di ciascuno dei due SmartPlug nché non lampeggiano prima la luce ver de e poi quella rossa. premere 5 sec. premere 5 sec. IT WLE-1000INT_QIG_20131127.indd 59-60 09-0 ...

  • Sitecom WLE-1000INT - page 31

    4 WA N LAN LAN LAN Collega il cav o micro USB allo SmartBridge e all’alimentator e USB, quindi collega l’ alimentatore a una presa di c orrente. 5 Quando il LED diventa blu  sso , signi ca che lo SmartBridge è stato installato corr ettamente. IT WLE-1000INT_QIG_20131127.indd 61-62 09-01-14 16:14 ...

  • Sitecom WLE-1000INT - page 32

    6 V eri ca che il LED degli SmartPlug sia verde  sso . • Ora puoi spostare gli SmartPlug e collegare i dispositivi da misurare . • Il pulsante può ora essere usato per acc endere o spegnere le spine. IT WLE-1000INT_QIG_20131127.indd 63-64 09-01-14 16:14 ...

  • Sitecom WLE-1000INT - page 33

    Registr azione di NET2 GRID 2 1 Scarica l’app gr atuita NET2GRID Energy Insight dall’ App Store o da Google Play . IT WLE-1000INT_QIG_20131127.indd 65-66 09-01-14 16:15 ...

  • Sitecom WLE-1000INT - page 34

    2 3 Apri l’app e fai clic su “registr azione” nella pagina iniziale. Compila il modulo di reg istrazione, indicando anche l’ID di SmartBridge annotato in precedenza. iOS iOS Android Android IT WLE-1000INT_QIG_20131127.indd 67-68 09-01-14 16:15 ...

  • Sitecom WLE-1000INT - page 35

    4 Contr olla l’acc ount di posta elettronica e segnati il nome utente e la password f orniti. • Se non trovi l’ e -mail, controlla anche la cartella della posta indesiderata. IT WLE-1000INT_QIG_20131127.indd 69-70 09-01-14 16:15 ...

  • Sitecom WLE-1000INT - page 36

    a. Apri l’app NET2GRID Energy Insight e accedi inser endo nome utente e passwor d. Monitor a e misura i c onsumi energetici 3 iOS Android IT WLE-1000INT_QIG_20131127.indd 71-72 09-01-14 16:15 ...

  • Sitecom WLE-1000INT - page 37

    A casa (gratuito) Dovunque* (3 EUR/mese) X Visualizzazione in tempo reale di quan ta elettricità consumano i dispositivi connessi Accensione/Spegniment o dispositivi connessi * Per acquistare l’abbonament o, andare su: https://store.net2grid.c om Piani cazione degli orari di accensione e spegnimento dei dispositivi connessi Visualizzazione di ...

  • Sitecom WLE-1000INT - page 38

    ES C ontenido 1x SmartBr idge 1x Adaptador de corriente 1x Cable de red Sitecom y NET2GRID Muchos prov eedores de energía ofrec en un modo de llevar el con trol de su gast o energético . Creemos que no debe estar atado a un prov eedor para llevar el control de su gasto ener gético. NET2GRID ofr ece una solución sencilla para medir y controlar e ...

  • Sitecom WLE-1000INT - page 39

    ES Puerto de red Puerto P1 SmartM eter Pot encia LED SmartPlug Emparejamiento del SmartPlug y botón de encendido / apagado Anillo LED Smar tBridge Smar tPlug • Modo de emparejamiento: LED destella en rojo/v erde, está listo para c onectarse al SmartBridge. • SmartPlug encendido: El LED es verde constante / SmartPlug apagado: El LED está apag ...

  • Sitecom WLE-1000INT - page 40

    ES An tes de c omenzar Anote el ID de SmartBridge Parte superior Parte inferior NET2G RID SMARTBRIDGE ID SMARTBRIDGE ID MAC ADDRESS MA C ADDRESS XXX XXX XX:XX:XX:XX:XX :XX XX:XX :XX:XX: XX:XX QR CODE QR COD E Smar tBridge Smar tBridge WLE-1000INT_QIG_20131127.indd 79-80 09-01-14 16:15 ...

  • Sitecom WLE-1000INT - page 41

    ES Instalación del Smar tBridge y de los Smar tPlugs 1 1 Enchufe los SmartPlugs en una toma de corriente . • Asegúrese de utilizar dos tomas de corriente cercanas al router (módem) para la instalación. • Después de realizar la instalación correctamente, puede mo ver los SmartPlugs a cualquier lugar del hogar . ! Compruebe si el LED de los ...

  • Sitecom WLE-1000INT - page 42

    ES 3 WA N LAN LAN LAN LAN router (módem) SmartBridge LAN Conecte el SmartBridge a su router (módem) con el cable de red suministrado . 2 Pulse el botón en cada uno de los dos SmartPlugs durante 5 segundos hasta que comience a parpadear en v erde y rojo . pulse 5 seg. pulse 5 seg. WLE-1000INT_QIG_20131127.indd 83-84 09-01-14 16:15 ...

  • Sitecom WLE-1000INT - page 43

    ES 4 WA N LAN LAN LAN Conecte el cable micro USB al SmartBridge y al adaptador de potencia USB y enchufe el adaptador de potencia en la toma de c orriente. 5 Cuando el LED sea de color azul  jo, su SmartBridge estará instalado correctamente . WLE-1000INT_QIG_20131127.indd 85-86 09-01-14 16:15 ...

  • Sitecom WLE-1000INT - page 44

    ES 6 Compruebe que el LED de los SmartPlugs sea de color verde  jo. • Ahora puede mover los SmartPlugs y enchufarlos a los dispositivos que desee medir . • El botón se puede utilizar ahora para encender y apagar los SmartPlugs. WLE-1000INT_QIG_20131127.indd 87-88 09-01-14 16:15 ...

  • Sitecom WLE-1000INT - page 45

    ES Registro c on NE T 2GRID 2 1 D escargue la aplicación NET2GRID Energy Insight g ratuita en App Store o Google Pla y . WLE-1000INT_QIG_20131127.indd 89-90 09-01-14 16:15 ...

  • Sitecom WLE-1000INT - page 46

    ES 2 3 Abra la aplicación y haga clic en “r egistrarse” en la pantalla de inicio. Rellene el formulario de registr o que incluye el ID de SmartBridge que haya indicado anteriormen te. iOS iOS Android Android WLE-1000INT_QIG_20131127.indd 91-92 09-01-14 16:15 ...

  • Sitecom WLE-1000INT - page 47

    ES 4 Consulte su cuenta de c orreo electrónico y anote su nombre de usuario y contraseña suministr ados. • Asegúrese de consultar su carpeta de correo no deseado si no encuen tra el mensaje. WLE-1000INT_QIG_20131127.indd 93-94 09-01-14 16:15 ...

  • Sitecom WLE-1000INT - page 48

    ES a. Abra la aplicación Energy Insight de NE T2GRID e inicie sesión con su nombre de usuario y contraseña. C ontr ol y medición del c onsumo energétic o 3 iOS Android WLE-1000INT_QIG_20131127.indd 95-96 09-01-14 16:15 ...

  • Sitecom WLE-1000INT - page 49

    ES En el hogar (gratuito) En qualquier lugar* (3 EUR/mes) X Vea cuán ta electricidad utilizan sus dispositivos conectados en tiempo real Apague/encienda los dispositivos conectados * Para comprar la suscripción, por favor va ya a: https://store.net2grid.c om Plani que horas de funcionamiento y desconexión para los dispositivos conectados Vea ...

  • Sitecom WLE-1000INT - page 50

    ww w .sitecom.c om/helpdesk WLE-1000INT_QIG_20131127.indd 99-100 09-01-14 16:15 ...

Manufacturer Sitecom Category Energy cost meter

Documents that we receive from a manufacturer of a Sitecom WLE-1000INT can be divided into several groups. They are, among others:
- Sitecom technical drawings
- WLE-1000INT manuals
- Sitecom product data sheets
- information booklets
- or energy labels Sitecom WLE-1000INT
All of them are important, but the most important information from the point of view of use of the device are in the user manual Sitecom WLE-1000INT.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Sitecom WLE-1000INT, service manual, brief instructions and user manuals Sitecom WLE-1000INT. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Sitecom WLE-1000INT.

Similar manuals

A complete manual for the device Sitecom WLE-1000INT, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Sitecom WLE-1000INT by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Sitecom WLE-1000INT.

A complete Sitecom manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Sitecom WLE-1000INT - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Sitecom WLE-1000INT, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Sitecom WLE-1000INT, that we can find in the current document
3. Tips how to use the basic functions of the device Sitecom WLE-1000INT - which should help us in our first steps of using Sitecom WLE-1000INT
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Sitecom WLE-1000INT
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Sitecom WLE-1000INT in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Sitecom WLE-1000INT?

Use the form below

If you did not solve your problem by using a manual Sitecom WLE-1000INT, ask a question using the form below. If a user had a similar problem with Sitecom WLE-1000INT it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)