English dropdown-ico

Manual Epson LX-300+

16 pages 0.94 mb
Download

Go to site of 16

Summary
  • Epson LX-300+ - page 1

    EPSON LX-300+ 5/00 EPSON LX-300+ - 1 User Replaceable Parts Options Single-bin Cut-sheet Feeder (C806371) Feeds up to 50 sheets of ordinary single-sheet paper. Additional Tractor Unit (C800301) Used in combination with the other tractor, improves continuous paper handling and reduces the chance of paper jams. This is especially useful for printing ...

  • Epson LX-300+ - page 2

    EPSON LX-300+ 2 - EPSON LX-300+ 5/00 Electrical Environmental Line spacing 1/6 inch or programmable in 1/216-inch increments Printable columns 80 columns (at 10 cpi) Resolution (maximum) 240 × 144 dpi (NLQ) Interfaces 1 standard bidirectional, 8-bit parallel interface with IEEE-1284 nibble mode support, and 1 EIA-232D serial interface Paper feed m ...

  • Epson LX-300+ - page 3

    EPSON LX-300+ 5/00 EPSON LX-300+ - 3 Paper Use recycled paper, envelopes, and single-sheet multipart forms only under normal temperature and humidity conditions, as follows: Temperature: 59 to 77 °F (15 to 25 °C) Humidity: 30 to 60% RH Do not load paper that has been folded or is damaged, wrinkled, or curled. Ordinary single sheets: paper guide a ...

  • Epson LX-300+ - page 4

    EPSON LX-300+ 4 - EPSON LX-300+ 5/00 Paper Alignment Printing starts at “0” on the scale. The unprintable area is to the left of the “0”. Printable Area Single sheets and envelopes A The minimum top margin is 0.17 inch (4.2 mm). B The minimum left and right margins are 0.12 inch (3 mm). The maximum paper width is 10.1 inches (257 mm). The m ...

  • Epson LX-300+ - page 5

    EPSON LX-300+ 5/00 EPSON LX-300+ - 5 Safety Approvals 120 V Safety standards UL 1950 CSA C22.2 No. 950 EMI FCC part 15 subpart B class B CSA C108.8 class B 230 V Safety standards EN 60950 EMI EN 55022 (CISPR pub. 22) class B AS/NZS 3548 class B Acoustic noise Approx. 49 dB (A) (ISO 7779 pattern) CE Marking 230 V Low Voltage Directive 73/23/EEC EN 6 ...

  • Epson LX-300+ - page 6

    EPSON LX-300+ 6 - EPSON LX-300+ 5/00 Selecting Fonts After entering the Micro Adjust mode by holding down the Pause button for three seconds, you can change font settings with the Tear Off button. The two Tear Off lights come on ( n ) and go off ( o ) to show the current selection. Press the button repeatedly to cycle through all of the available s ...

  • Epson LX-300+ - page 7

    EPSON LX-300+ 5/00 EPSON LX-300+ - 7 Paper Positions Top-of-Form Position The top-of-form position is where the printer starts printing on single sheets or continuous paper. Tear-off Position Continuous paper is in the tear-off position when the perforation is aligned with the tear-off edge. You can easily tear off your printed document at this pos ...

  • Epson LX-300+ - page 8

    EPSON LX-300+ 8 - EPSON LX-300+ 5/00 Printing with the Pull Tractor To load continuous paper using the pull tractor, you must move the tractor to the pull tractor position, as described in steps 1 through 4 below. If your tractor is already installed in this position, make sure the printer is off and skip to step 7. Use the knob on the left side of ...

  • Epson LX-300+ - page 9

    EPSON LX-300+ 5/00 EPSON LX-300+ - 9 7. Slide the left sprocket unit so that its sprockets match the position of the holes in the paper and lock the unit in place. Then slide the right sprocket unit to match the width of your paper, but do not lock it. Move the paper support midway between the two sprocket units. 8. Open the sprocket covers, fit th ...

  • Epson LX-300+ - page 10

    EPSON LX-300+ 10 - EPSON LX-300+ 5/00 To adjust the top-of-form position for continuous paper loaded on the pull tractor, see the following example: First mark a point 0.1 inch (2.5 mm) above the paper’s perforation; then position the paper so that the mark is even with the top edge of the plastic ribbon cover. This gives you a 0.33-inch (8.5-mm) ...

  • Epson LX-300+ - page 11

    EPSON LX-300+ 5/00 EPSON LX-300+ - 11 5. After you set the tear-off position, press the Pause button to turn off the Micro Adjust mode. 6. Tear off the printed page(s). When you resume printing, the printer automatically feeds the paper back to the top-of-form position. Printing on Single Sheets You can load single-sheet paper one sheet at a time u ...

  • Epson LX-300+ - page 12

    EPSON LX-300+ 12 - EPSON LX-300+ 5/00 Adjusting the Paper Thickness Lever Before printing on special paper, you need to change the paper thickness setting. The paper thickness lever is under the cover on the left side of the printer. The numbers next to the lever indicate the thickness setting. Use the table below to select the appropriate paper th ...

  • Epson LX-300+ - page 13

    EPSON LX-300+ 5/00 EPSON LX-300+ - 13 Default Settings While you can often set the default settings through your application software or printer driver, you may need to change a default setting from the printer’s control panel using the default setting mode. The table below lists the default settings (in bold) and options you can select in this m ...

  • Epson LX-300+ - page 14

    EPSON LX-300+ 14 - EPSON LX-300+ 5/00 Bidirectional Alignment If you notice that the vertical lines in your printout are not properly aligned, you can use the printer’s bidirectional adjustment mode to correct this problem. To complete the steps below, you need 5 letter or A-4 size single sheets or 5 pages of continuous paper. If you use single s ...

  • Epson LX-300+ - page 15

    EPSON LX-300+ 5/00 EPSON LX-300+ - 15 Cleaning the Printer To keep your printer operating at its best, you should clean it thoroughly several times a year. Follow these steps: 1. Remove any paper loaded in the printer and turn it off. 2. Unplug the power cord from the electrical outlet; then disconnect the interface cable from the printer. 3. Remov ...

  • Epson LX-300+ - page 16

    EPSON LX-300+ 16 - EPSON LX-300+ 5/00 ...

Manufacturer Epson Category Printer

Documents that we receive from a manufacturer of a Epson LX-300+ can be divided into several groups. They are, among others:
- Epson technical drawings
- LX-300+ manuals
- Epson product data sheets
- information booklets
- or energy labels Epson LX-300+
All of them are important, but the most important information from the point of view of use of the device are in the user manual Epson LX-300+.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Epson LX-300+, service manual, brief instructions and user manuals Epson LX-300+. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Epson LX-300+.

Similar manuals

A complete manual for the device Epson LX-300+, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Epson LX-300+ by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Epson LX-300+.

A complete Epson manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Epson LX-300+ - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Epson LX-300+, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Epson LX-300+, that we can find in the current document
3. Tips how to use the basic functions of the device Epson LX-300+ - which should help us in our first steps of using Epson LX-300+
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Epson LX-300+
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Epson LX-300+ in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Epson LX-300+?

Use the form below

If you did not solve your problem by using a manual Epson LX-300+, ask a question using the form below. If a user had a similar problem with Epson LX-300+ it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)