English dropdown-ico

Manual Frymaster BIPH52/55

90 pages 13.68 mb
Download

Go to site of 90

Summary
  • Frymaster BIPH52/55 - page 1

    SERVICE MANUAL FRYMASTER BIPH52/55 AND MPH52/55 SERIES GAS FRYERS Frymaster, L.L.C. 8700 Line Avenu e 71106, 5489 Campus Drive 7 1129 P.O. Box 51000, Shrevepo rt, Louisiana 71135-1000 TEL 318-865-1 711 F AX (Parts) 318-219- 714 0 (Tech Support) 318-219-7135 PRINTED IN THE UNITED STATES SERVICE HOTLINE MAY 2006 1-800-24-FRYER www.frymaster.com E-mai ...

  • Frymaster BIPH52/55 - page 2

    NOTICE IF, DURING THE WARRANTY PERIOD, THE CUST OMER USES A PART FOR THIS ENODIS EQUIPMENT OTHER TH AN AN UNMODIFIED NEW OR RECYCLED PART PU RCHASED DIRECTLY FROM FRYMASTER DEAN, OR ANY OF ITS AUTH ORIZED SERVICE CENTERS, AND/OR THE PART BEIN G USED IS MODIFIED FR OM ITS ORIGINAL CONFIGURATI ON, THIS WARRANTY WILL BE VOID. FURTHER, FRYMAST ER DEAN ...

  • Frymaster BIPH52/55 - page 3

    DANGER Improper installation, adjustment, maintenance or service, and unauthorized alterations or modifications can cause property damage, injury, or death. Read the installation, operating, and service instructions thoroughly before installing or servicing this equipment. Onl y qualified service personnel may convert this appliance to use a gas ot ...

  • Frymaster BIPH52/55 - page 4

    i W ARRANTY ST A TEMENT Frymaster, L.L.C. makes the following limited warranties to the original purchaser only for this equipment and replacement parts: A. WARRANTY PROVISIONS - FRYERS 1. Frymaster L.L.C. warrants all components against defects in material and workmanship for a period of one year. 2. All parts, with the exception of the frypot, he ...

  • Frymaster BIPH52/55 - page 5

    ii D. WARRANTY PROVISIONS - COOKING COMPUTER 1. Frymaster L.L.C. warrants the M-2000 Cooki ng Computer against defective material or workmanship for a period of three years from the original installation date. If the unit fails within the first year, warranty will cover part and labor. If the part fails the second year, warranty will cover part onl ...

  • Frymaster BIPH52/55 - page 6

    iii BIPH52/55-MPH52/55 SERIES GAS FRYERS TABLE OF CONTENTS CHAPTER 1: Service Procedures 1.1 Functional Description ..................................................................................................... .1 - 1 1.1.1 The Electronic Ignition System .......................................................................... 1-1 1.1.2 Int ...

  • Frymaster BIPH52/55 - page 7

    iv BIPH52/55-MPH52/55 SERIES GAS FRYERS TABLE OF CONTENTS 1.12 Simplified Wiring Diagram s ........................................................................................... 1-4 4 1.12.1 BIPH52/55 Series Full Vat ............................................................................... 1-44 1.12.2 BIPH52/55 Series Dual Vat .......... ...

  • Frymaster BIPH52/55 - page 8

    1-1 Inside the Ignition Module TD Out to Gas Valve To A l a r m 25 V + GND HV Ignition Wire Flame Sensor Coil BIPH52/55-MPH52/55 SERIES GAS FRYERS CHAPTER 1: SERVICE PROCEDURES 1.1 Functional Description BIPH52/55 and MPH52/55 Series gas fryers contain a welded stainless steel frypot that is directly heated by a high efficiency infrared burner syst ...

  • Frymaster BIPH52/55 - page 9

    1-2 provide current to the ignition module. Circuitr y in the ignition module sends 24 VAC to the gas valve via a normally closed high-limit switch (and, in fryers with built-in filtration systems, a normally closed drain safety switch). Simultaneous ly, the m odule causes the ignitor to spark for 4 seconds to light the burner. A flame sensor verif ...

  • Frymaster BIPH52/55 - page 10

    1-3 CURRENT FLOW THROUGH IN TERFACE BOARD 106-0386SP (BIPH52/55 and MPH5 2/55 SERIES APPLICATION) 1 2 3 4 5 6 7 8 9 10 11 12 J3 J2 PIN 1 J2 1 2 4 5 6 7 8 9 10 11 12 13 14 15 1 2 3 4 5 6 7 8 9 10 11 12 J1 LEFT VAT FULL OR RIGHT VAT INTERFACE BOARD 12 VAC TO CP TR J3 PIN 1 GROUN D GROUND 3 COMPUTER (12 VAC) J3 PIN 3 COMPUTER RT HT RELA Y COMPUTER LT ...

  • Frymaster BIPH52/55 - page 11

    1-4 FRE QUENTL Y US ED TE ST POI NTS F OR I NT ERF ACE BOA RD 1 06 - 03 86 S P Me t e r S e ttin g 12VA C Pow er t o C ont rol l er 50VA C Scal e 1 and 3 on J3 or J2 12-18 24VAC Pow er t o Ri ght M odul e 50VAC Scal e 8 on J3 an d G RO U ND 22- 28 120 VAC Pow er 250VAC Scal e 11 on J3 a nd GR O UN D 110- 125 120 VAC Pow er t o Bl o w er s 250VAC Sc ...

  • Frymaster BIPH52/55 - page 12

    1-5 2. Remove any attached restraining devices and relocate the fryer for service accessibility. 3. After servicing is complete, reconnect the unit to the gas supply, reattach restraining devices, and plug in the electrical cords. NOTE: To ensure the safe and efficient operation of the fryer and hood, the electrical plug for the 120-volt lin e, whi ...

  • Frymaster BIPH52/55 - page 13

    1-6 3. Insert the fitting for a gas pressure-measuring device into the pressure tap hole. 4. On non-CE fryers only , place the gas valve in the ON position. 5. Place the fryer power switch in the ON position. When the burner has lit and burned steadily for at least one minute, compare the gas pressure r eading to the pressure for the corresponding ...

  • Frymaster BIPH52/55 - page 14

    1-7 7. Place the fryer power switch (and the gas valve in non-CE fryers) in the OFF position. Remove the fitting from the pressure tap hole and reinstall the pressure tap plug. 1.5 Measuring Flame Current When the burner flame is properly adjusted, it will produce a current between 2.5 μ A and 3.5 μ A. Flame current is measured by placing a micro ...

  • Frymaster BIPH52/55 - page 15

    1-8 7. Remove the controller by lifting it up and out from the hinge slots in the control panel fram e. 8. Re-hinge the NEW controller by inserting the tabs on the bottom into the slots on the control panel frame and allow it to rest on the hinge tabs. 9. If replacing the 15-pin connector, do so now. Plug the new 15-pin wiring harness into the inte ...

  • Frymaster BIPH52/55 - page 16

    1-9 13. Rotate the top of the component box out of the fram e and carefully pull it out enough to disconnect the wiring harness plug from the back of the box. If the unit is equipped with built-in filtration, disconnect the wires from the filter switch. This will leave one set of wires, enclosed in spiral wrap, connected to the component box. 14. R ...

  • Frymaster BIPH52/55 - page 17

    1-10 9. Remove the nuts at each corner of the interface board and carefully pull it from the studs far enough to allow the connector on the back of th e board to be disconnected, then remove the board from the box. When rem oving the board, be car eful not to lose the spacers that fit over the studs behind the board. 10. Recover the relay(s) from t ...

  • Frymaster BIPH52/55 - page 18

    1-11 3. Remove the sheet metal screws securing the ign itor to the mounting plate and pull the ignitor from the fryer. 4. Reverse the procedure to install the replacement ignitor. 1.6.6 Replacing or Cleaning a Combustion Air Blower 1. Disconnect the blower wiring harness, remove th e blower assem bly mounting nuts, and remove the blower assembly fr ...

  • Frymaster BIPH52/55 - page 19

    1-12 Remov e these screw s to remove the sh ield fr om the blower assembly. Remove these nuts to separate the blower motor from the housing. 3. Wrap the motor with plastic wrap to prevent water f rom entering it. Spray degreaser or detergent on the blower wheel and the blower housi ng. Allow it to soak for five minutes. Rinse the wheel and housing ...

  • Frymaster BIPH52/55 - page 20

    1-13 7. After the burners have been lit for at least 90 seconds, observe the flames through the burner viewing ports located on each side of the combustion air blower. The air/gas mixture is properly adjusted when the burner manifold pressure is in accordance with the applicable table on page 1-6 and the burners display a bright orange-red glow. If ...

  • Frymaster BIPH52/55 - page 21

    1-14 1.6.7 Replacing a Gas Valve DANGER Drain the frypot or remove the handle from the drain valve before proceeding further. 1. Disconnect fryer from electrical and gas supplies. 2. Disconnect the drain safety and high-limit thermost at wires from the gas valve. Mark each wire to facilitate reconnection. 3. Remove the vent tube (on non-CE fryers) ...

  • Frymaster BIPH52/55 - page 22

    1-15 ALL OTHER VALVES 4. Carefully unscrew the valve from the manifold. NOTE: Som e models may have the valve attached to the manifold by means of a pipe union. In such cases, remove the valve by uncoupling the union. 5. Remove all fittings from the old gas valve and install them on the replacem ent valve, using Loctite ® PST56765 or equivalent pi ...

  • Frymaster BIPH52/55 - page 23

    1-16 8. Remove the washers and tubular spacers from th e m ounting studs, then pull the inner covers straight out toward you until clear of the mounting studs. 9. Grasp the burner firmly and pull it toward you un til it clears the burner channels, taking care not to damage the ceramic tiles in the process. 10. Clean all debris from the burner chann ...

  • Frymaster BIPH52/55 - page 24

    1-17 DANGER DO NOT attempt to drain more than one full fry pot or two split frypots into the SDU at one time. 3. Position a container beneath the oil return fitting at the front of the cabinet. Disconnect the flexible oil line from the fitting, allowing any residual oil to drain into the container. 4. At the rear of the fryer, unplug the left conne ...

  • Frymaster BIPH52/55 - page 25

    1-18 2. Remove the filter pan from the unit and drain one frypot at a time into a Shortening Disposal Unit (SDU) or other appropriate metal container. DANGER DO NOT attempt to drain more than one full fry pot or two split frypots into the SDU at one time. 3. Dismount the topcap by removing the screws on the bottom of each front corner and lifting t ...

  • Frymaster BIPH52/55 - page 26

    1-19 17. Remove the screws in the back panel and inside the flue cap at each end that secure the flue cap to the fryer and lift it clear of the fryer. 18. Disconnect the oil return line(s) from the frypot to be rem oved. 19. Carefully lift the frypot from the fryer cabinet. 20. Remove the drain valve(s), tem perature probe(s), high-limit thermostat ...

  • Frymaster BIPH52/55 - page 27

    1-20 8. Remove the inner upper combustion cham ber insulation retainer and insulation (8). 9. Remove the rear lower combustion cham ber retainers, back, and insulation (9). NOTE: Full-vat units have two-piece backs and four retainers. Dual-vat units have one-piece backs and two retainers. 10. Remove the flue assem bly (10). See Page 1-22 for Reasse ...

  • Frymaster BIPH52/55 - page 28

    1-21 Disassembling A Frypot (Full Vat Illustrated) Spacers Spacer 10 2 3 4 5 6 7 8 1 11 9 ...

  • Frymaster BIPH52/55 - page 29

    1-22 11. Remove the upper burner rails (11). NOTE: For the following steps, refer to the frypot exploded view on page 1-24 for component identification. 12. Remove any residual insulation, sealant, and/or oil from the exterior of the frypot. 13. Place the “L” shaped pieces of the combustion ch am ber insulation (1) in the front and rear corners ...

  • Frymaster BIPH52/55 - page 30

    1-23 24. Verify that the burners are flush with the front edge of the burner rails. Remove the excess burner insulation by cutting with a knife or diagonal pliers. Do not try to tear the insulation! 25. Insert the upper front insulation (10) into its re tainer (11), making sure that the holes in each piece are aligned with one another. Install the ...

  • Frymaster BIPH52/55 - page 31

    1-24 Re-assembling A Frypot (Full-Vat Illustrated) 6 5 4 1 2 7 8 9 1 3 10 11 12 13 14 18 20 19 17 16 15 24 23 21 22 ...

  • Frymaster BIPH52/55 - page 32

    1-25 1.7 Troubleshooting and Problem Isolation Because it is not feasible to attempt to include in this m anual every conceivable problem or trouble condition that might be encountered, this section is intended to provide technicians with a general knowledge of the broad problem categories associated with this equipment, and the probable causes of ...

  • Frymaster BIPH52/55 - page 33

    1-26 valve handle appears to be in the closed position, the microswitch is still open). If the valve is fully closed, refer to Section 1.8.1, TROUBLESHOOTING THE 24 VAC CIRCUIT . Some typical causes of ignition failure in this cate gory include a defective sensing wire in the ignitor assembly, a defective module, a defective ignition wire, and a de ...

  • Frymaster BIPH52/55 - page 34

    1-27 kitchen area, this indicates that more air is being exhausted than is being replenished and the burners may be starved for air. If the fryer’s gas and air supplies are okay, the probl em is mo st likely with one of the electrical components. Examine the ignition m odule and c ontroller for signs of melting, distortion, and/or discoloration d ...

  • Frymaster BIPH52/55 - page 35

    1-28 320ºF (132ºC to 160ºC)). The pr imary causes of this include an over-filled frypot, a dirty or out-of-adjustment combustion air blower, low bur ner m anifold pressure, and/or damaged burner tiles. Adding oil to the frypot during the recovery process will also cause a slow recovery rate. If these causes are ruled out, the probable cause is a ...

  • Frymaster BIPH52/55 - page 36

    1-29 COMMON COMPUTER COMPLAINTS Most problems concerning computers have to do with programming them . There are two common complaints: 1. Fryer constantly displays “ HI .” Cause: Setpoint is incorrect or missing. Corrective Action: Check setpoint and refer to the M2000 computer m anual for instructions to adjust the setpoint. 2. Temperature is ...

  • Frymaster BIPH52/55 - page 37

    1-30 Sediment Particle FLOW Up for reverse Down for forward PUMP A pump seized by debris or hard shortening can usually be freed by manually m oving the gears with a screwdriver or other instrument as illustrated on the following page. Make sure pow er to the pump motor is off before trying this. 1. Disconnect power to the filter system. 2. Remove ...

  • Frymaster BIPH52/55 - page 38

    1-31 Loctite ® PST56765 sealant or equivalent to prevent leakage. In very rare cases, a leak may develop along one of the welded edges of the frypot. When this occurs, the frypot must be replaced. If the sides or ends of the frypot are coated with oil, the most likely cause is spillage over the top of the frypot rather than leakage. The clamps on ...

  • Frymaster BIPH52/55 - page 39

    1-32 i. If 24 VAC is not present, check the fuses. If they are good, the probable causes are failed ignition module(s) or a failed in terface board. Replace the questionable ignition module with one known to be good to isolate the cause. ii. If 24 VAC is present, the probable cause is a failed interface board. • 24 VAC is present on interface boa ...

  • Frymaster BIPH52/55 - page 40

    1-33 24 VOLT CIRCUIT With Interface Board 106-0386 and One 807-3366 (FV) Ignition Module NOTE: Som e u ni ts ma y be wi red in this manner. IGNITION MODULE V1S PWR (left side) V2S LED 5 (GV) J3 PIN 9 Jumper LED 3 (24V) 24V TRANSFORMER IGNITION MODULE PWR (right side) V1D LED 5 (GV) J3 PIN 9 J3 PIN 8 LED 4 (PWR) HIGH LIMIT SWITCH GAS VALVE High Volt ...

  • Frymaster BIPH52/55 - page 41

    1-34 LEFT VAT IGNITION MODULE LED 2 (PWR) PWR V2D HIGH LIMIT SWITCH LED 1 (GV) GAS VALVE IGNITION MODULE PWR V1D HIGH LIMIT SWITCH GAS VALVE 24V TRANSFORMER LED 5 (GV) J1 PIN 9 J3 PIN 9 RIGHT VAT J3 PIN 8 24 VOLT CIRCUIT With Interface Board 106-03 86 and Two 807-3365 (DV) Ignition Modules LED 4 (PWR) High Voltage to Ignitor High Voltage to Ignitor ...

  • Frymaster BIPH52/55 - page 42

    1-35 1.8.2 Troubleshooting the Gas Valve Prior to checking for problems associated with the ga s valve, ensure that the unit is calling for heat. Also, for non-CE units, verify that the gas valve is in the ON position. The following processes will assist you in troubl eshooting the gas valve and ruling it out as a probable cause: • If 24 VAC is n ...

  • Frymaster BIPH52/55 - page 43

    1-36 • If resistance through J3 pins 2 and 6 (J1 pins 2 and 6 for left side of dual unit) is approximately equal to that given in the Probe Resistance Chart for the corresponding temperature, measure the resistance through each of the previously tested pins to ground. 1. If resistance is not 5 mega-Ohms or greater in each pi n, the probe has fail ...

  • Frymaster BIPH52/55 - page 44

    1-37 1.10 Principal Wiring Connections GROUND LINE VOLTAG E L1 GROUND, JUMP ERED FROM PIN 2 GROUND, JUMPERED TO PIN 11 JUMPERED FROM PIN 4 JUMPERED TO PIN 7 JUMPERED TO PIN 6 JUMPERED TO PIN 9 AN D T2 FROM T1, JUMPERED TO PIN 8 FROM J1 PIN 10 FROM J3 PIN 7 FROM J3 PIN 10 FROM J1 PIN 7 FROM T2, JUMPERED TO PINS 3 & 9 LINE VOLTAGE COM TO FILTER B ...

  • Frymaster BIPH52/55 - page 45

    1-38 1.11 Wiring Diagrams 1.11.1 Main 8051315C/ 805152 6B Refer to "PRI NCIPAL WIRIN G CONNECTIONS " on Page 1-37 for detail of connection points J1, J2, J3, C2, C3, a nd C5. K1 2 COMPUTER GROU ND DETAIL A A SENSE 2 ALARM(GND) VALVE(GND) 24VAC(GND) 24VAC SPARK 2 SPARK 1 GND (BURNER) VALVE ALARM SENSE 1 SOUND DEVICE SOUND DEVICE LEFT IGNIT ...

  • Frymaster BIPH52/55 - page 46

    1-39 1.11.2 Transformer / Filter Boxes 1.11.2.1 MPH152/155 Transformer / Filter Box ...

  • Frymaster BIPH52/55 - page 47

    1-40 1.11.2.2 BIPH252/255 and 452/455 Transf ormer / Filter Box (Domestic) GREEN BLACK WHITE ORANGE RED HOOD RELAY HOOD RELAY 120 VAC BLK RED ORG WHT GREEN TO BODY CAUTION: TH IS PLUG IS NOT BEING USE D IN ITS STANDARD 5-WIRE 120/208V NEMA L-21-2 0P CONFIG URATI O N. DO NO T CONNEC T TO A DT ANDARD 120/208V 5 WIRE POWER SUPPLY. NEUTRAL 8051523D ...

  • Frymaster BIPH52/55 - page 48

    1-41 1.11.2.3 BIPH252/255 and 452/455 Transfo rmer / Filter Box (International) 8051340C ...

  • Frymaster BIPH52/55 - page 49

    1-42 1.11.2.4 BIPH352/355 Transformer / Filter Box (Domestic) GREEN BLACK WHITE ORANGE RED HOOD RELAY HOOD RELAY 120 VAC BLK RED ORG WHT GREEN TO BODY CAUTION: THIS P LUG IS NOT BEIN G USED IN ITS STANDARD 5-WIRE 120/208V NEMA L-21-20P CONFIGURATION. DO NOT CONNECT TO A DTANDARD 120/208V 5 WIRE POWER SUPPLY. Pump Heater Strip W ires ...

  • Frymaster BIPH52/55 - page 50

    1-43 1.11.2.5 BIPH352/355 Transformer / Filter Box (International) ...

  • Frymaster BIPH52/55 - page 51

    1-44 1.12 Simplified Wiring Diagrams 1.12.1 BIPH52/55 Series Full Vat T M n o t a p p l i c a b l e t o f r y e r s m a n u f a c t u r e d b e f o r e 6 / 9 6 n o t a p p l i c a b l e t o f r y e r s m a n u f a c t u r e d b e f o r e 6 / 9 6 ( O N E D U A L F U N C T I O N H E A T / B L O W E R R E L A Y ( K 3 ) ) ...

  • Frymaster BIPH52/55 - page 52

    1-45 1.12.2 BIPH52/55 Dual Vat T D G N D A L A R M 2 5 V + R I G H T I G N I T O R V A L V E T E M P P R O B E B L O W E R 2 4 V O P T I O N A L A I R S W I T C H 6 J 3 1 1 4 8 4 8 9 9 R - H E A T L E D 4 K 2 H E A T R E L A Y R - G V L E D 5 R P W R V 1 D A L A R M 3 5 1 0 4 1 3 1 4 1 1 J 2 3 5 1 0 4 1 3 1 4 1 1 T R O U B L E P O W E R H E A T B N ...

  • Frymaster BIPH52/55 - page 53

    1-46 1.12.3 BIPH52/55 Series Full Vat (Australia and Pacific Rim) K3 HEAT RELAY OPTIONAL AIR SWITCH BLOWER 12V 24V TEMP PROBE 24V LED 3 LED 5 R-GV R-HEAT LED 4 R PWR V1S ALARM LED 6 12V L HEAT LED 2 L PWR ALARM V2S ON/ OFF TROUBLE HEAT T J3 6 2 12 9 11 8 5 4 3 1 J2 11 11 4 4 13 13 14 14 10 10 5 5 3 3 1 1 2 2 RIGHT IGNITION MODULE ALARM TD VALVE GND ...

  • Frymaster BIPH52/55 - page 54

    2-1 BIPH52/55-MPH52/55 GAS FRYERS CHAPTER 2: PARTS LIST 2.1 Accessories 2 3 4 9 10 11 12 13 15 14 6 7 1 8 16 17 18 19 5 ITEM PART # COMPONENT 1 803-0271 Basket, Twin 2 803-0099 Basket, Full (cannot be used with basket lifts) 3 803-0133 Basket Support Rack, Dual Vat 4 803-0132 Basket Support Rack, Full Vat * 803-0136 Basket Support Screen, Full Vat ...

  • Frymaster BIPH52/55 - page 55

    2-2 ITEM PART # COMPONENT 18 812-1378 Drain Extension, Non-Filter Full Vat Fryer 19 812-1374 Drain Extension, Non-Filter Dual Vat Fryer * 803-0219 Pad, McDonald’s FPIII Universal Filter * 803-0170 Filter Pack, Paper – 100 Sheets * 803-0002 Powder, Filter – 80 Packages * 826-1157 Kit, Fuse and Fuse Puller (2 Fuses) * Not illustrated. ...

  • Frymaster BIPH52/55 - page 56

    2-3 2.2 Cabinetry 2.2.1 Backs, Doors, Flue Caps, Sides, Top Caps, Standoffs and Cap-N-Splash Assemblies 1 2 3 5 7 8 9 4 6 10 12 11 13 14 9 17 18 21 22 19 16 15 20 24 25 23 ...

  • Frymaster BIPH52/55 - page 57

    2-4 ITEM PART # COMPONENT 1 Back, Single Uppe r 210-6581 Stainless Steel 200-6581 Cold Rolled Steel 2 Back, Sin g le Lowe r 210-6580 Stainless Steel 200-6580 Cold Rolled Steel 3 Back, Double U pp er ( for 2-, 4-, and 5-station fr y ers – does not include Items 7-9 ) 210-6542 Stainless Steel 200-6540 Cold Rolled Steel 4 Back, Double Lower ( for 2- ...

  • Frymaster BIPH52/55 - page 58

    2-5 ITEM PART # COMPONENT 20 Standoffs 200-6582 Single Fryer 200-6553 2-Station Fryer 200-6554 3-Station Fryer 200-6555 4-Station Fryer 200-6556 5-Station Fryer 21 Cap-N-Splash Assemblies 823-3066 Single Fryer 823-3067 2-Station Fryer 823-3068 3-Station Fryer 823-3070 4-Station Fryer 823-3069 5-Station Fryer 22 826-1351 Nut Retainer, ¼-20 (Pkg. of ...

  • Frymaster BIPH52/55 - page 59

    2-6 2.2.2 Filter Cabinet Bases, Casters, Framing, and Related Components NOTE: 2- and 3-station fryers have 4 casters; 4- and 5-station fryers have 6. See Page 2-4 for upper hinges. 1 2 3 4 5 6 7 8 11 9 10 12 13 14 15 16 17 20 21 18 19 31 31 25 25 25 27 26 30 32 33 33 32 31 The 5-station cabinet illu strated is typical of all BIPH52/55 Series Gas f ...

  • Frymaster BIPH52/55 - page 60

    2-7 ITEM PART # COMPONENT 1 106-4303 Frame, Control Panel, Two Station, (use 106-5221SP mfd. After 3.15.06) 106-4304 Three-Stat ion, Standard (use 106-5018SP mfd. After 3.15.06) 106-4305 Four-Sta tion, Standard (use 106-5019 mfd. After 3.15.06) 106-4306 Five-St ation, Standard (use 106-5020 mfd. After 3.15.06) 2 210-5819 Bezel, Two-Controller 3 210 ...

  • Frymaster BIPH52/55 - page 61

    2-8 2.2.3 Non-Filter Cabinet Bases, Caster s, Framing, and Related Components NOTE: 2- and 3- stati on fryer s have 4 casters ; 4- and 5-stat i on fryer s have 6. See Page 2-4 for upper hinges. The 5-station cabinet illustrated is typical of all MPH52/55 Series Gas non-fil ter cabinets. All base and framing components used in MPH52/55 Series Gas no ...

  • Frymaster BIPH52/55 - page 62

    2-9 ITEM PART # COMPONENT 1 Frame, Control Panel 106-4302 Single-Station, Standard (use 106-5016 mfd. After 3.15.06) 106-4303 Two-Station, Standard (use 106-5221SP mfd. After 3.15.06) 106-4304 Three-Station, Standard (use 106-55018SP mfd. After 3.15.06) 106-4305 Four-Station, Standard (use 106-5019 mfd. After 3.15.06) 106-4306 Five-Station, Standar ...

  • Frymaster BIPH52/55 - page 63

    2-10 2.3 Controllers and Associated Components 2 1 1 2 JC ABC DEF GHI JKL MNO PQR ST U VWX YZ - * - 123456789 0 1 ITEM PART # COMPONENT 1 Com puter, McDonald’s M2000 Gas Fryer 106-1269 Full Vat (Domestic U.S.) Can also be program med for Dual Vat. 106-0672 Full Vat (CE) Can also be programm ed for Dual Vat. 106-5950 Full Vat (CE) Can also be prog ...

  • Frymaster BIPH52/55 - page 64

    2-11 2.4 Drain, Filtration, and Oil Return System Components 2.4.1 Filtration System Components ...

  • Frymaster BIPH52/55 - page 65

    2-12 ITEM PART # COMPONENT 1 106-2617SP Pan Assem b ly, FootPrint Pro Filter (incl. O-rings, rollers, nuts & crumb tray) 826-1980 Pan Assembly – No Screen 823-3930SP Pan Assembly, Filter 813-0568 Plug, ⅛ -inch NPT Socket Head 826-1392 O-Ring (two required) (Pkg. of 5) 810-2198 Roller, Filter Pan 826-1372 Nut, ¼-20 Hex Flange (Pkg. of 10) 8 ...

  • Frymaster BIPH52/55 - page 66

    2-13 2.4.2 Drain Valves and Associated Components ...

  • Frymaster BIPH52/55 - page 67

    2-14 ITEM PART # COMPONENT 1 810-1569 Valve Assembly, 1.25-inch Full-Vat Non-Filter Drain (includes handle) * 810-1427 Lock Pin Handle for 1.25-inch Valve Assembly 2 806-7915SP Valve Assembly, 1-inch Left Dual-Vat Non-Filter Drain (complete assembly) 3 806-7916SP Valve Assembly, 1-inch Right Dual-Vat Non-Filter Drain (complete assembly) 4 809-0589 ...

  • Frymaster BIPH52/55 - page 68

    2-15 2.4.3 Rear Flush Oil Return Line Components ...

  • Frymaster BIPH52/55 - page 69

    2-16 ITEM PART # COMPONENT 1 Valve Assembly, Microswitch and Ball Valve 106-3452 Valve Rear Flush Assembly, Left Side 106-3453 Valve Rear Flush Assembly, Right Side 2 810-2493 Elbow, 90° x ¼-inch 3 809-0601 Clip, Rod End Clevis 4 Shaft, Rear Flush Valve 211-6701 For use in Left oil return valve assemblies. 212-6701 For use in Right oil return val ...

  • Frymaster BIPH52/55 - page 70

    2-17 2.5 Electronics and El ectrical Components (for Controllers, Page 2-10) 2.5.1 Component Boxes 1 7 15 20 20 15 7 1 19 5 22 U.S., Canadian, and Mexic an Units CE and Non-C E Export Units Except Aust raila and Ho ng Kong Australian Units Hong Kong Units 4 27 10 10 2 20 15 7 1 24 17 13 25 23 11 21 3 26 15 22 19 9 16 21 23 25 24 17 11 9 19 22 2 2 2 ...

  • Frymaster BIPH52/55 - page 71

    2-18 ITEM PART # COMPONENT 1 810-1164 Block, One-Piece Screwless Terminal 2 200-5996 Box, One-Piece Component 3 807-1926 Bushing, .875-inch Split 4 807-3483 Cable, 21-inch Igniti on H50/H52 –For 807-3366/3365 Modules * 826-2024 Cable, Ignition - 1 wire / 1 rajah * 826-1721 Cable, Ignition – 2 wire / 2 rajah 5 807-3484 Connector, Rajah 6 106-053 ...

  • Frymaster BIPH52/55 - page 72

    2-19 2.5.2 Transformer Boxes ...

  • Frymaster BIPH52/55 - page 73

    2-20 2.5.2 Transformer Boxes Continued 36 F 7 8 37 9 2 5 13 30 35 33 32 31 26 30 11 18 22 25 28 24 14 19 30 19 30 19 30 30 16 36 G 7 8 37 6 2 5 13 30 35 33 32 31 26 30 11 28 24 14 19 30 19 30 19 30 19 30 39 22 25 38 ...

  • Frymaster BIPH52/55 - page 74

    2-21 ITEM PART # COMPONENT Box Assembly, Transformer A 106-1380 100-120V FMPH152/155, FMPH352/355, FMPH452/455 B 106-3818 100-120V BIPH 252/255, BIPH 452/455, FMPH252/255 C 106-4888 100-120V BIPH 352/355 D 106-3819 208-240V BIPH 252/255 and BIPH 452/455 CE/Non-CE Export E 106-3817 250V BIPH 252 and BIPH 452 CE/Non-CE Export F 106-3824 208-240V BIPH ...

  • Frymaster BIPH52/55 - page 75

    2-22 Continued from Previous Page ITEM PART # COMPONENT * WIR 0623 Wire Assembly, PH52 Hood Relay * WIR0634 Wire Assembly, FPP50 Transformer/Filter Box (used in Item E) * WIR0635 Wire Assembly, FPPH350 Transformer Filter Box (used in Item G) * WIR0439 Wire Assembly, Transformer Box (used in Item s B, D, and E) * WIR0447 Wire Assembly, Transformer B ...

  • Frymaster BIPH52/55 - page 76

    2-23 2.7 Frypots and Associated Components 2.7.1 Full-Vat Frypot Components ...

  • Frymaster BIPH52/55 - page 77

    2-24 ITEM PART # COMPONENT 1 106-1019SP Flue Assembly, Full-Vat 2 200-0936 Back, Left Full-Vat Combustion Chamber 3 200-0937 Back, Right Full-Vat Combustion Chamber 4 200-2227 Retainer, Full-Vat Upper Insulation 5 826-1372 Nut, ¼-20 Flange Hex (Pkg. of 10) 6 826-1371 Screw, #8 X ½-inch Hex Head Drill Point (Pkg. of 25) 7 809-0362 Screw, #8 X 1¼- ...

  • Frymaster BIPH52/55 - page 78

    2-25 2.7.2 Dual-Vat Frypot Components ...

  • Frymaster BIPH52/55 - page 79

    2-26 ITEM PART # COMPONENT 1 106-1018SP Flue Assembly, Dual-Vat 2 200-0941 Back, Dual-Vat Combustion Chamber 3 200-2229 Retainer, Dual-Vat Upper Insulation 4 826-1372 Nut, ¼-20 Flange Hex (Pkg. of 10) 5 809-0360 Screw, #8 X ⅜ -inch Hex Head 6 809-0362 Screw, #8 X 1¼-inch Hex Washer Head Drill Point 7 826-1383 Washer, Steel (Pkg. of 5) 8 809-050 ...

  • Frymaster BIPH52/55 - page 80

    2-27 2.8 Gas Supply and Combustion Sy stem Components PH252/255 Full Vat Gas Manifold (Typical) The example illustrated is typical of BIPH52/55-MPH52/55 Fryer Gas Manifolds. Each manifold is assemb led from standard 1/2-, 3/4-, and 1-inch NPT black iron pipe nip ples , elbows, tees, plugs, and unions, which may be locally aquired. 3 4 5 See Section ...

  • Frymaster BIPH52/55 - page 81

    2-28 ITEM PART # COMPONENT 1 Ignitor (includes gasket 816-0059, which may be ordered separately) 826-0981 Natural Gas (G20, G25) 826-0982 Propane (G30, G31) 826-1002 Manufactured Gas 2 826-1371 Screw, #8 X ½-inch Hex Head (Pkg. of 25) 3 Blower Assembly, Combustion Air (includes harness and Item s 4, and 5) 106-2996SP 100V 50/60 Hz (Left) 106-2999S ...

  • Frymaster BIPH52/55 - page 82

    2-29 2.9 Gas Valves and Associated Components Non-CE Gas Valve Assembly (Typical ) CE Gas Valve Assembly (Typical ) 5 1 2 3 6 7 8 9 10 11 12 13 14 15 13 22 16 18 17 19 20 21 10 11 23 NOTE: The gas tube and enrichment tube fittings are assembled in varying configurations depending upon the location of the valve and whether the associated frypo t is ...

  • Frymaster BIPH52/55 - page 83

    2-30 ITEM PART # COMPONENT 1 Valve, Non-CE Gas 826-1122 Natural Gas (G20, G25) 826-1120 Kit Natural Gas w/ flexlines and hardware 826-1123 Propane Gas (G30, G31) 826-1121 Kit, Propane Gas w/ flexlines and hardware 2 810-1715 Valve, CE Gas (G20, G25, G30, G31) 3 810-1041 Accessory Kit (contains parts to adapt Item 2 to specific fryer configura- tion ...

  • Frymaster BIPH52/55 - page 84

    2-31 2.10 Wiring Assemblies and Harnesses Filter Associated Wiring 1 2 ITEM PART # COMPONENT 1 807-3584 Cable, Filter Lower 9-Pin Plug to 807-2001 15-Pin (C2) Connector 2 807-2001 Cable, 810-3584 15-Pin C2 Connector to Component Box Gas Valve Wiring 1 2 3 ITEM PART # COMPONENT 1 806-3941SP Harness, Full Vat Gas Valve 2 806-3940SP Harness, Dual Vat ...

  • Frymaster BIPH52/55 - page 85

    2-32 Main Wiri ng Harnesses U.S. and Non-CE ha rness (shown) has two un termin ated wir es . Untermin ated wi res. CE harn ess has two untermi nated wires pl us two addi tional wi res with push-on terminals. ITEM PART # COMPONENT 807-1978 U.S. and Non-CE Export Main Wiring Harness 807-2168 CE Main Wiring Harness 3 1 2 4 ITEM PART # COMPONENT 1 806- ...

  • Frymaster BIPH52/55 - page 86

    2-33 Transformer Box Cable Assemblies 1 2 3 4 5 6 7 8 9 10 11 ...

  • Frymaster BIPH52/55 - page 87

    2-34 ITEM PART # COMPONENT 1 106-1011 Cable Assembly, Transformer Box Line (See NOTE 1) 2 106-1016 Cable Assembly, Transformer Box to Filter Pum p (See NOTE 2) 3 106-3821 Cable Assembly, Transformer Box #2 Position (See NOTE 7) 4 106-3820 Cable Assembly, Transformer Box #1 Position (See NOTE 3) 5 106-3316 Cable Assembly, Transformer Box Line (See N ...

  • Frymaster BIPH52/55 - page 88

    2-35 2.11 Miscellaneous Connectors and Terminals 1 2 4 5 3 6 7 9 10 8 11 13 12 ITEM PART # COMPONENT 1 807-1068 2-Pin Female 2 807-0158 6-Pin Female 3 807-0156 9-Pin Female 4 807-0159 12-Pin Female 5 807-0875 15-Pin Female 6 807-1067 2-Pin Male 7 807-0157 6-Pin Male 8 807-0155 9-Pin Male 9 807-0160 12-Pin Male 10 807-0804 15-Pin Male 11 826-1341 Te ...

  • Frymaster BIPH52/55 - page 89

    THIS PAGE INTENTIONALLY LEFT BLANK ...

  • Frymaster BIPH52/55 - page 90

    Frymaster, L.L.C., 8700 Line Av enue, PO Box 51 000, Shreveport, Louisiana 71135-1000 Shipping Address: 8700 Line Av enue, Shreveport, Louisiana 71106 TEL 1-318-865-1711 FAX (Parts) 1-318- 219-71 40 FAX (Tech Support) 1-318-219-7135 PRINTED IN THE UNITED STATES SERVICE HOTLINE 1-800-551-8633 819-6094 MAY 2006 ...

Manufacturer Frymaster Category Fryer

Documents that we receive from a manufacturer of a Frymaster BIPH52/55 can be divided into several groups. They are, among others:
- Frymaster technical drawings
- BIPH52/55 manuals
- Frymaster product data sheets
- information booklets
- or energy labels Frymaster BIPH52/55
All of them are important, but the most important information from the point of view of use of the device are in the user manual Frymaster BIPH52/55.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Frymaster BIPH52/55, service manual, brief instructions and user manuals Frymaster BIPH52/55. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Frymaster BIPH52/55.

Similar manuals

A complete manual for the device Frymaster BIPH52/55, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Frymaster BIPH52/55 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Frymaster BIPH52/55.

A complete Frymaster manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Frymaster BIPH52/55 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Frymaster BIPH52/55, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Frymaster BIPH52/55, that we can find in the current document
3. Tips how to use the basic functions of the device Frymaster BIPH52/55 - which should help us in our first steps of using Frymaster BIPH52/55
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Frymaster BIPH52/55
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Frymaster BIPH52/55 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Frymaster BIPH52/55?

Use the form below

If you did not solve your problem by using a manual Frymaster BIPH52/55, ask a question using the form below. If a user had a similar problem with Frymaster BIPH52/55 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)